Groen SSB-WT User Manual
WATER TREATMENT SYSTEM
SSB-WT
Water Treatment System
months, or longer, before needing replacement. The
clear lter bowl provides visible indication of the
amount of treatment chemical remaining in the unit.
Installation
Single-Stage,
Replaceable
Cartridge, In-Line
Water Treatment
Kit
For use with:
SmartSteam™
Short Form
Water Treatment
System
shall be
a Groen Model SSB-WT (P/N
149101), designed for use with
Groen Model SmartSteam™
Boilerless Steamer, per Bulletin
149200 as follows. SSB-WT
system to be a single stage, wall
mounted treatment system with a
replaceable treatment cartridge and
a clear lter bowl to allow
observation of the condition of
the treatment material. Treatment
chemical to assist in cleanability of
the steamer cavity from hard water
despots forming in the steam
generator. Cartridges to install
without special tools and to provide
PROJECT NAME:
LOCATION:
ITEM NO:
REPLACEABLE CARTRIDGE MODEL SSB-WT
SmartSteam100 Water Treatment System shall be Groen Model SSB-WT (Part No. 149100) designed
specifically for use with the Groen SmartSteam100 Boilerless Steamer as follows.
CONSTRUCTION: System shall consist of a
stainless steel mounting bracket with a single cartridge
head, a clear filter bowl, a treatment cartridge, an
integrated manifold and a water shutoff valve. It shall
be designed for quick and easy cartridge replacement.
Separate systems are recommended for each steamer at
a location.
REPLACEABLE TREATMENT
CARTRIDGES: System shall employ one replaceable
cartridge that locks into the manifold head and is
surrounded by a clear filter bowl. The treatment
cartridge is designed to dispense a special treatment
blend at a constant rate as water flows through the
filter bowl. The cartridge can be easily changed without
special tools. The cartridge is designed to provide
sufficient treatment to the water consumed by a doublestacked SmartSteam100 steamer for 6 months, or
longer, before needing replacement. The clear filter bowl
provides visible indication of the amount of treatment
chemical remaining in the unit.
INSTALLATION LOCATION
RECOMMENDATION: The SmartSteam100
Water Treatment Kit can be installed anywhere in
the incoming water line, prior to the SmartSteam100
steamer using the treated water. However, we
recommend it be mounted near the steamer to
allow easy and frequent operator inspection of the
cartridge. Note: Cartridge MUST be replaced when
exhausted to ensure effective treatment of incoming
water and long term trouble free cleaning of steam
cooking equipment.
ORIGIN OF MANUFACTURE: Designed and
manufactured in the United States.
QTY:
MODEL NO:
AIA NO:
SIS NO:
Single-stage, replaceable cartridge,
in-line water treatment system.
(Model SSB-WT shown)
OPTIONS/ACCESSORIES:
Replacement Cartridge [Part
No. 149101]
INSTALLATION: Install using 3/4” NH [Garden Hose
Type] connections in unit incoming [treated] water line.
No special tools required. Note: The SmartSteam100
models are supplied with a single water input using NH
connection fittings. Mounting bracket to be secured
to wall, post or bracket with two sheet metal screws
(supplied in the kit) and wall anchors as needed to
support 20 pounds. See planograph for mounting hole
position and overall unit dimensions.
Water Treatment System
149360 RevB
Revised 04/12
P/N 149336 REV A
SSB-WT
FLOW DIRECTION
4 3/4 [120]
HANDLE SWING
MOUNTING HOLES
VALVE ON
WATER TREATMENT SYSTEM
PARTS LIST
P/N 149100
PART NUMBER
139391
139392 NIPPLE, 1/2" MPT
140839 BRACKET, FILTER MOUNTING
NOTES:
1 COLD WATER SUPPLY CONNECTION: 3/4" NH
2 DIMENSIONS IN BRACKETS [] ARE MM.
SERVICE PARTS
REPLACEMENT CARTRIDGE149101
FILTER HOUSING CONTAINER
2 3/8
[61]
ADAPTER,
WATER INLET
ADAPTER,
WATER OUTLET
FILTER HOUSING
CONTAINER
12" [305]
5" [127] MINIMUM
CLEARANCE
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2013 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
Loading...