Groen SSB-3EF General Manual
SmartSteam100 Boilerless Steamer
Description
Steamer shall be a Groen Model SSB-3E/EF
SmartSteam100™ stainless steel, boilerless, convection
steamer with a self-contained atmospheric 9 KW electric
steam generating reservoir.
Construction
Steamer cavity and cabinet shall be all stainless steel
construction, with removable right and left-side panels,
providing access to internal components. Steamer shall
have no side vents for increased water/spray resistance.
Steamer door shall be all stainless steel with a strong
continuous hinge and field-reversible for left or right
swing. Door shall be insulated and provided with a onepiece, replaceable seal. Easy-open door handle and latch
shall provide positive lock and seal when door is pushed
or slammed shut.
A hidden magnetic door switch shall cut power to blower
fan and shut down power to the steam generating reservoir when the door is opened. Pan support racks shall be
stainless steel and removable for easy cleaning. A stainless steel condensate collection tray shall be positioned
under the cavity door.
Finish
Cabinet exterior, including door, shall be a #3 uniform
finish. Cavity interior shall be polished stainless steel.
Control panel face plate shall be smudge-resistant polyester film, ensuring maximum ease in cleaning and
maintenance of an attractive appearance.
UL Listing
Steamer shall be UL and cUL listed.
Sanitation
Steamer shall be designed and manufactured to meet
NSF requirements and all known health codes. Steamer
shall be NSF listed.
Controls
Steamer controls shall include an on-off rocker switch;
electronic timer, with continuous steam, timed steam and
stop buttons; READY light which indicates when cavity is
warm and ready for steaming.
Performance Features
Steamer cavity shall have a powerful, side-mounted
blower to increase steam velocity and provide efficient
steam distribution throughout the cavity and between
loaded pans. Steam generator shall deliver 3 KW of
electric power input per 2-1/2” deep steam pan. Steamer
shall have a steam lid positioned over the steam generating reservoir to ensure that adding/removing food does
not lower the cavity or water temperature.
Heat up time to READY shall typically be 15 minutes or
less. Cavity is kept warm and ready for instant steam
between loads. No cavity warm up required after READY
light comes on.
Atmospheric Steam Generating Reservoir
Steamer shall have an electric-heated steam generating
reservoir to provide atmospheric steam to the cavity at a
Model SSB-3EF shown
temperature of approximately 212° F. The high-efficiency
steam generating reservoir shall have water level sensors.
Electric heating elements shall not be immersed in water
(dry) and replaceable from the rear.
Acidic products and other commercial chemicals shall not
be used to clean the steamer. A daily wipe down of the
steamer cavity, steam lid and floats is sufficient to maintain
optimal operation of the steamer. However, Groen Descaler
or approved equal may be required.
Pan Capacity
Pan Size / Type Number
12 x 20 x 1” 6
12 x 20 x 2 1/2” 3
12 x 20 x 4” 2
Installation
Steamer shall require 208, 240 or 480 Volt, 3-phase electrical service. Single phase shall be available for 208 and 240
Volt operation. Steamer shall be connected to a ¾” NH cold
water supply line and a 1-1/2” free venting drain.
Water Supply Requirements
Steamer must be connected to an on-site water supply.
Water supply at 30 to 60 PSIG with flow at .75 - 1.5 GPM
per cavity.
Options/Accessories
Factory Stacking Kit
Stainless Steel Support Stand
Pan Rack Kit (for support stand)
Flanged Foot Kit (for support stand)
Caster Kit (for support stand)
Heat Shield Kits
4” Adjustable Legs (table top only)
Origin of Manufacture
Steamer shall be designed and manufactured in the U.S.A.
models SSB-3E/EF
3-Pan Boilerless
Convection Steamer
Table Top or
Stand-Mounted,
Stainless Steel,
Self-Contained,
Electric Heated
Short Form SSB-3E/EF
Steamer shall be a Groen
SmartSteam100™ Boilerless
Convection Steamer Model
SSB-3E/EF with self-contained, atmospheric, electric-heated steam generating
reservoir. Construction shall
be all stainless steel. Cavity
shall have a powerful sidemounted blower to circulate
steam. Standard operating
controls shall include: an onoff rocker switch; electronic
timer, with continuous steam,
timed steam and stop buttons; READY light. Door shall
be field-reversible and shall be
equipped with an easy-open
latch and hidden magnetic
door switch. The atmospheric
steam generating reservoir
shall not require a pressure
gauge or switches; shall have
an automatic drain and shall
have 9 KW of dry element
heating capacity. Steamer
shall come up to READY in
15 minutes from a cold start
and shall provide warm cavity, instant steam capability. Electric, water and drain
connections shall conform to
instructions provided on the
back side of this sheet. UL/
cUL and NSF listed. Made in
the USA.
Applications
Pasta
Rice
Vegetables (Fresh & Frozen)
Seafood (Fresh & Frozen)
Poultry
Potatoes
Eggs
Meats
Reheat Cook-Chill &
Prepared Foods
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
Groen SmartSteam100, Page 1
146569F
Revised 08/09
Models SSB-3E/EF
SERVICE CONNECTIONS & NOTES:
DRAIN CONNECTION: 1 1/2" [38] HOSE TYPE (DRAIN FREE VENTING).
1
DO NOT CONNECT DIRECTLY TO DRAIN. ALLOW 2" AIR GAP
WATER SUPPLY: 3/4" MALE HOSE CONNECTION.
2
30 TO 60 PSIG WITH A FLO W RATE OF 0.75-1.50 GPM.
PRESSURE REGULATION IS REQ`D FOR WATER PRESSURE OVER
60 PSI. DO NOT USE TREATED WATER.
ELECTRICAL CONNECTION: SEE CHART
3
CONDUIT HOLE SIZE: 1-1/4" HOLE
[26]
[35]
[441]
8
17 1/2
[445]
MOUNTING HOLES IN BASE
USE 3/8"-16 BOLTS WHICH
MUST NOT EXTEND INTO STEAMER
BY MORE THAN 3/8" [10]
1 1/32
1 3/8
17 3/8
P/N 146385 REV F
MINIMUM REAR AND SIDE CLEARANCES:
4
5
6
1 1/4
1
1 3/8
7 11/16
17
[25]
[432]
[32]
[195]
[35]
32 3/4
[832]
ELECTRICAL SUPPLY
3
2
1
7
8
EACH SIDE = 2" [50.8]
REAR = 6" [152.4]
DIMENSIONS IN BRACKETS [ ] ARE MM.
IF THE FLOOR DRAIN ONLY SERVICES
THIS STEAMER, THEN THE DRAIN MAY BE
LOCATED WITHIN THE STEAM FREE ZONE.
STEAM FREE ZONE MUST BE OBSERVED
IF OTHER APPLIANCES CAUSE STEAM AT
THE FLOOR DRAIN.
DO NOT INSTALL STEAMER DIRECTLY
ABOVE STEAM VENTING FLOOR DRAINS
STEAM EXHAUST
ELECTRICAL REQUIREMENTS
VOLTAGE
208
240
480
PHASE
AMPS
1
44
3
25
1
38
3
22
3
11
ALL UNITS 60Hz
REAR OF STEAMER
STEAM EXHAUST
ELEMENT ACCESS PANEL
MAX.
KW
9
9
9
9
9
31 1/16
[791] MIN
STEAM FREE ZONE
SEE NOTES
DRAIN
7
UNIT
OPTIONAL SUPPORT STAND
6 [152]
WATER SUPPLY
FRONT OF STEAMER
21 3/4 [552]
2"
[51]
6
18" [457]
21 9/16
[548]
21 1/16
[535]
4
4
2" [51]
DRAIN
TABLE TOP UNIT WITH
OPTIONAL 4" LEGS OR
COUNTER MOUNTED UNIT
(NOT SHOWN)
29 7/8 [759]
ALIGN REAR OF UNIT
TO TABLE IF COUNTER
MOUNTED
1
32 [813]
[152]
4
6
13/16 [21]
7 13/16
1
1 3/4 [44]
39 [990]
[198]
2
2
10 11/16
[271]
3
41 13/16
[1063]
3
FINISHED FLOOR
1 1/2 [38] MIN
2 5/8 [87] MAX
5" [127]
WITH CASTERS
(NOT SHOWN)
OPTIONAL RACKS
FRONT VIEW SIDE VIEW
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.
Loading...