Groen SSB-3EE User Manual
SMARTSTEAM100 BOILERLESS STEAMER
PROJECT NAME:
LOCATION:
ITEM NO:
MODEL SSB-3E/EF
Steamer shall be a Groen Model SSB-3E/EF SmartSteam100™ stainless steel, boilerless, convection steamer
with a self-contained atmospheric 9 KW electric steam generating reservoir.
CONSTRUCTION: Steamer cavity, cabinet
and stand shall be stainless steel construction, with
removable side panels. Steamer shall have no side vents
for increased water/spray resistance. Steamer door
shall be stainless steel with continuous hinge and fieldreversible, with one-piece replaceable seal. Easy-open
door latch shall provide positive closure when pushed or
slammed shut. A hidden door switch shall cut power to
blower fan and steam generating reservoir when door is
opened. Pan support racks are stainless steel and easily
removed for cleaning. Stainless steel condensate tray is
located under cavity door.
FINISH: Cabinet exterior, including door, shall be a #3
uniform finish. Cavity interior shall be polished stainless
steel.
UL LISTING: Steamer shall be UL and cUL listed.
SANITATION: Steamer shall be designed and
manufactured to meet NSF requirements and all known
health codes. Steamer shall be NSF listed.
CONTROLS: Steamer controls shall include an
on-off rocker switch; electronic timer, with continuous
steam, timed steam and stop buttons; READY light which
indicates when cavity is warm and ready for steaming.
PERFORMANCE FEATURES: Steamer cavity
shall have a powerful, side-mounted blower to increase
steam velocity and provide efficient steam distribution
throughout cavity and between loaded pans. Steam
generator shall deliver 3.0 KW of electric power input
per 2 ½” deep steam pan. Steamer shall have a steam
lid positioned over steam reservoir to ensure adding/
removing food does not lower the cavity or water
temperature. Heat up time to READY shall be typically
be 15 minutes or less. Cavity is kept warm and ready
for instant steam between loads. No cavity warm up
required after READY light comes on.
ATMOSPHERIC STEAM GENERATING
RESERVOIR:
heated steam generating reservoir to provide
atmospheric steam to the cavity at a temperature
of approximately 212° F. The high-efficiency steam
generating reservoir shall have water level sensors.
Electric heating elements shall not be immersed in
water (dry) and replaceable from the rear.
Steamer shall have an electric-
PAN CAPACITY:
Pan Size/ Type Total
12 x 20 x 1” 6
12 x 20 x 2-1/2” 3
12 x 20 x 4” 2
INSTALLATION: Steamer shall require 208,
240, or 480 Volt, 3-phase electrical service. All units
ship three-phase, and are field convertible to singlephase operation. Each cavity shall have (2) ¾” NH
water supply lines and a 1-1/2” free venting drain.
WATER SUPPLY REQUIREMENTS:
Steamer must be connected to an on-site water
supply. Water supply at 30 - 60 PSIG with flow at
.75 - 1.5 GPM per cavity.
ORIGIN OF MANUFACTURE: Designed and
manufactured in the United States.
QTY:
MODEL NO:
AIA NO:
SIS NO:
3-Pan Boilerless Convection Steamer,
table top or stand-mounted, stainless
steel, self-contained, electric heated.
(Model SSB-3EF shown)
OPTIONS/ACCESSORIES:
Prison package
4” leg set
Field drain tempering kit
Heat shield
Stand
Caster kit for stand
Flanged foot kit for stand
Pan rack kit for stand
Water treatment kit
Water treatment
replacement filter
SmartSteam100
146569 RevK
Revised 01/16
P/N 146385 REV G
SSB-3E/EF
888-994-7636, unifiedbrands.net
© 2015 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
Loading...