Grandview GPCP-E User Manual

Details of installation

Height and length adjustment

1.Loos en t he p osi tioning scre ws o f lo w bo ard (2-2), the heigh t of GPC P
Main Bar Overview can be adjusted (the maxi mum heigh t: 45mm) as
figure 1 1.

2.Loos en th e pos iti oning screws of main bar (1-4), the length of
subsidiar y bar (1-3 ) can be ad justed (c heck abou t the data of scope f or
instal lat ion) as f igu re 12.

3.Loos en the pos itioning screws of in stallati on board (1-5) , the height
of in sta llation board (1-5) c an be adjusted ( the max imum he ight: 3 0mm)
as figur e 13.

figur e 11 figur e 12 figur e 13

Angle Ad justmen t

1.Hori zon tal ad justment : rotate t he adj ust ing bu tto n (3-2 ) for h ori zonta l
angle, f igu re 14

2.Vert ica l adju stment: rotate the adjusting button (3-3) for vertical
angle, f igu re 15

3.Hori zon tal rota tion adj ustment: loosen the rota tion adj usting screw
(4-2), the in stallati on base can be rot ated by 360 °; faste n the rotat ion
adjust ing s crew (4 -2) a fter decid ing the angl e.figure 1 6

Installation of main bar

1.Firs tly , plea se con firm how many install ati on hol es the proje cto r has?
3 or 4.

2.Inst all the requi red instal lat ion ar ms (4-3) to Installatio n bracke（ 4 -

1） And t hen , ins tal lation a rms(4-3) to the projector, and then connec t
the instal lat ion arms (4-3) to the insta lla tion base (4-6) Howe ver,the
instal lat ion bas e nee ds to be th e cen ter of pr oje ctor. F igu re 17

3.Conn ect the inst all ation arms to the projector conversely if the
dis tance o f ins ta llati on hole s is le ss than 1 20mm. C onnec t the
instal lation arm s (4- 3) to t he in stall ation base (4-6 ) via s lid ing
instal lat ion button ( 4-5) as figu re 18

4.Rota te th e adjus tab le screw (4- 4) for adjus ting the hei ght of instl lation
arms (4- 2) if the inst all ation hole s are not at the s ame level as f igure 19.

5.The fron t or b ack o f adjuste r must be para llel to the surface of
projec tor a s figure 20.

figur e 17

Scope of
adjustment: 10mm

GRANDVIEW REPRODUCING GENUINE COLORS

Instruction Manual

Projector Wall Mount

Applicable Model
GPCP-E4060
GPCP-E6090
GPCP-E90150

figur e 14

figur e 15

figur e 16

The nagle of
horizontal tilt:±8°

The angle of
vertical tilt:±15°

otation 360R : °

figur e 18 figur e 19

figur e 20

Grandview Crystal
Screen Canada Ltd.

#11- 3751 N orth F rase r Way,
Marin e Way Bus ines s Cent re,
Burna by, BC, Ca nada V 5J 5G4
Tel: [phone]
Fax: [phone]
Websi te: ww w.gran dvie wscr een. ca

The front or back of
adjuster must be
parallel to the surface
of projector

Guangzhou Grandview
Crystal Screen Co., Ltd.

P.O. 511400 Fede ral In d. Zon e No. 36 3,
Yushan Wes t Road ,Shi qiao , Pany u
Distr ict, G uang zhou , Guan gdon g, Chi na
Tel: [phone]
Fax: [phone]
Websi te: ww w.gran dvie wscr een. com

Please read before using

Thank you for purchasing our prod ucts. Please read the instructio n
manual caref ully in order to ensure this pro jector lift is s uitable for your
projection equipment .

Cautious

Warnings

Weight

Caution

Do not
take apart

For safet y, t he m inim um of ceil ing must be 20Kgweight

The maxim um w eigh t of ins tall atio n br acke t is 20Kg

(note: the insta llation br acket's ma ximum weig ht of GPCP -E90150 is 15kg)

Pleas e do not incline t he p roje ctor the ext reme ly.

Please do not take apart the accessories of projector
ceiling mount.

Parts

Scope

Steps of installation

GPCP-E is combined by GPCP and GPE

1-1 1-3 1-4 2-2

1-2

1-5

GPCP Main Bar Overview
1-1 Top Cap
1-2 Front Board
1-3 Subsidiary Bar
1-4 Main Bar
1-5 Installation Board
2-1 Low Cap
2-2 Low Board
2-3 Fixation

GPD Adjustment Overview
3-1 Adjuster
3-2 Horizontal Adjusting
Button
3-3 Vertical Adjusting
Button
4-1 Installation Bracket
4-2 Rotation Adjusting Screw
4-3 Installation Arm
4-4 Adjustable screw
4-5 Sliding Installation
Button
4-6 Installation Base

2-3

2-1

3-1
3-2

4-1
4-2

3-3

4-3

4-4

4-6
4-5

Accessories

①M3X8 Philips Screw (4pcs)
②M4X8 Philips Screw (4pcs)
③M5X8 Philips Screw (4pcs)
④M5X8 Philips Screw (4pcs)
⑤M6X12 Anti-Slip Screw (2pcs)
⑥M5X10 Philips Screw (7pcs)
⑦M6X25 Tapping Screw (4sets)
⑧ 6X50 Wood Screwn (4sets)

Scope f or ins tall ation (H is the distance between ceiling and projector)
The H of GPCP-E 4060 i s 420m m~60 0mm
The H of GPCP-E 6090 i s 600m m~90 0mm
The H of GPCP-E 9015 0 is 900 mm~1 500m m

H

GPCP-E

Steps of installation

1

Firstly, collect the power wires to the main bar as figure 1.
Invaginate the low cap to the main bar as figure 2. Install the
low board to the main bar, and then fasten the screws
(accessories 5 ) as figure 3. Finally, install the front board to
installation board of main bar and install the adjuster to the
front board, and then fasten the screws (accessories 6) as
figure 4.

2

Install the fixation on the wall (choose the screws according
to the materials of wall, Use the screw of accessory 7 for
concrete-wall, and use the screw of acessory 8 for wood­wall) as figure 5.And then, install the Main Bar Overview to
the fixation and fasten the screws (accessory 5). Finally,
connect the GPE Adjusting Overview to the adjuster and
then fasten the screws (accessory 6 ) as figure 7.

figur e 5 figur e 7

figur e 6

Details of installation

Wires collection

Loosen out t he p ositioni ng scre ws o f main bar (1-4) as f igu re 8 , an d then
take apa rt subsidia ry bar (1- 3) from main bar ( 1-4). Pu t the wir es into
the m ain bar (1-4) then i nsert the wire s to t he p lastic groove of
subsidiar y bar (1- 3). A nd then , re- insta ll th e subsidia ry bar (1 -3) t o main
bar (1-4 ) after coll ect ing the w ire s as figure 9- 10.

Scope

Scope f or ins tall ation (Installation hole of projector):
Maxim um sco pe for i nsta llation:390mm diameter
Minim um sco pe for i nsta llation:20mm diameter

Note: C onnec t the installa tion arms to the p rojector con versely for di fferent inst allat ion
holes o f proje ctor.

Maxim um diameter : 390mm

Minim um diameter : 20mm

figur e 1 figur e 2

accessory 5

figur e 3 figur e 4

figur e 8

figur e 9

figur e 10