
CONGRATULATIONS
on your
new
This Quick Start Guide will show you
the basics of capturing life’s most
incredible moments with your GoPro.
To download the full user manual,
visit gopro.com/getstarted
SETUP
1
Open the side door and
inser t a microSD card.
(Requires a t least a Class 10 or UHS-I
microSD card u p to 64GB, sold separa tely.)
2
Charge using the included
USB cable. The red status
light turns off when fully
charged.
INFO/WIRELESS BUTTON
Change settings, get status
info, and connect to the GoPro
App for mobile or the Smart
Remote (sold separately).

POWERING ON
+ RECORDING
RECORDING VIDEO
To power on the camera and
record video, press the Shutter/
Select button [ ].
SHOOTING TIME LAPSE PHOTOS
To power on the camera and
shoot Time Lapse photos, press
and hold the Shutter/Select
button [ ] until recording begins.
STOPPING + POWERING OFF
Press the Shutter/Select
button [ ]. The camera stops
recording and powers off.
CAPTURING
SINGLE PHOTOS
1. Press the Info/Wireless
button to turn on the status
screen.
2. Press the Info/Wireless
button again to get to Enter
Photo Mode, then press the
Shutter/Select button [ ]
to select it.
To capture Burst photos, see the user manual at
gopro.com/getstarted.
3. Press the Shutter/Select
button [ ] to capture a photo.
4. Pre ss the Info/Wireless button
to get to Exit Photo Mode, then
press the Shutter/Select
button [ ] to select it.