Gold's Gym GGMC0724.0 User Manual
odel No. GGMC0724.0
M
Serial No.
(Write the serial number in the
space above for reference.)
QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or if a part is
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CALL TOLL-FREE:
1-877-776-4777
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:
www.goldsgympowerflex.com
USER'S MANUAL
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
WARNING: T
before using the resistance system MAX PACK.
1. Read all instructions in this manual and in the
literature accompanying the resistance system before using the resistance system. Use
the resistance system only as described in
the literature.
2. Keep hands and feet away from moving parts.
o reduce the risk of serious injury
, read the following important precautions
3. It is the responsibility of the owner to ensure
that all users of the resistance system are
adequately informed of all precautions.
4. Use only the bands included with a GOLD’S
GYM MAX PACK.
BEFORE YOU BEGIN
Thank you for selecting the GOLD’S GYM®MAX PACK
resistance system accessory. The MAX PACK is
designed to increase the amount of resistance available on GOLD’S GYM POWER FLEX resistance systems. The MAX PACK provides progressive resistance. As the bands begin to stretch, the amount of
resistance will increase gradually. As the bands stretch
further, the resistance will increase rapidly.
ASSEMBLY
1. Plug the Sensor (5) into the indicated hole in the
Back Mech Cover (A).
For your benefit, read this manual carefully before
using the MAX PACK and the resistance system. If
you have questions after reading this manual, see the
front cover of this manual. To help us assist you,
please note the product model number and serial
number before calling. The model number is
GGMC0724.0. The serial number can be found on the
product packaging. Record the serial number on the
front cover of this manual.
1
A
5
2. Remove the two Screws (B) and the two Cover
Panels (C) from the Mech Covers (A, D).
Attach the four Band
3.
Covers (A, D). Slide the four Bushings (2) onto
the Band Axles.
Axles (1) to the Mech
2
C
B
A
C
B
3
1
2
D
2
1
2
1
A
D
2
Loading...