GE Sensing Moisture Probe Specifications

GE Oil & Gas

What You Need to Know
About Moisture Probe
Calibration and Recalibration

Moisture Probe Calibration

Each aluminum oxide sensor is individually
calibrated in one of our advanced moisture

calibration facilities. Our facilities use ow,
temperature and pressure measurement devices,
traceable to national standards, to generate

precisely known moisture concentration calibration
gases that are passed by each probe during the
calibration process.

All data is taken and stored by a dedicated
computer system. Calibrations are repeated
numerous times to determine the stability of each
individual moisture probe. Only those probes that

meet GE’s demanding specications for accuracy

and stability are shipped to our customers.

Moisture Probe Recalibration Service

GE provides moisture probe recalibration as a
service to our customers. Recalibration involves
cleaning contaminants from the probes and putting
moisture probes through our standard calibration
procedure described above.

The updated calibration data is collected and
dated. The moisture probe is then returned to you
with a new calibration data sheet. In addition to

providing updated calibration data, we also review

the calibration history of the moisture probe for

GE moisture probe calibration system

unusual changes. We regularly contact customers
with feedback to ensure proper installation and to
recommend adjustments in the calibration cycle.

Typically, GE recommends recalibration on a six­to twelve-month cycle.

g

© 2008 General Electric Company. All Rights Reserved. Specications are subject to change without notice. GE is a registered trademark of General Electric Company. Other company or product
names mentioned in this document may be trademarks or registered trademarks of their respective companies, which are not aliated with GE.

g

What your GE calibration
specialist will require from
you during your call

• Probe part number and serial number. We

will give you information on expected
turnaround time.

• A valid Purchase Order (P.O.) number.

Shipping instructions

Ship your probes to the appropriate service
location with the RMA number that we will
provide you with during the call, clearly
marked on the outside of the package. Use
the original moisture probe shipping box to
protect the moisture probes from damage
during shipping.

Probe shipping box with calibration data sheet

www.gemeasurement.com

920-441A