g
GEH5629 Installation Instructions R05
Spectra Series™ Power Panelboards
Filler Plate Kit AFP6SKS
WARNING: Danger of electrical shock or injury.
OFF
Turn
switchboard before workin
ment or removing any component. Do
e
not remove circuit
other component until the power is turned
OFF.
ower ahead of the panelboard or
inside the
rotective devices or an
General
These instructions apply to the following catalog numbers:
• Filler plate kit AFP6SKS
• Circuit breaker types TKM, THKM, TK4V, TKL4V,
SKHA, SKLA, and SKPA
Installation
1. Install circuit breaker. Install the circuit breaker
according to instruction sheet GEH-5623 for plug-in
construction or DEH-061 for bolt-on construction.
2. Install end filler plates. For type TKM, THKM,
TK4V, TKL4, SKHA, SKLA, and SKPA circuit
breakers, place the lug covers, as listed in Table 1, on
the line and load ends of the circuit breaker, as
shown in Figure 1. Attach the end filler plates, as
listed in Table 2, to each side of the circuit breaker
with the #10-32 x
screws to 15 in-lb.
Breaker Type Lug Cover
TKM, THKM 455C592P1, furnished with kit
TK4V, TKL4V 455C592P2, furnished with kit
SKHA, SKLA Use covers furnished with breaker
SKPA* Use covers furnished with breaker
* SKPA is available in 44"-wide panelboard or 45"-wide
switchboard construction only.
Table 1. Lug covers used with each breaker type.
Filler Plate Switchboard or Panelboard
252B1768G2 40"-wide panelboard or switchboard
252B1768G1 44"-wide panelboard
252B1768G1 45"-wide switchboard
Table 2. End filler plates used with each panelboard or switchboard.
#10-32 Screws
9
/16" screws provided. Tighten the
Filler
Plate
Lug
Cover
Lug
Cover
Figure 1. Installation of lug covers and filler plates.
Filler
Plate
These instructions do not cover all details or variations in e
ma
be met in connection with installation, operation, or maintenance. Should further information be desired or should
articular problems arise that are not covered sufficiently for the purchaser’s purposes, the matter should be referred to the
GE Company.
ment nor do they provide for every possible contingency that
GE Industrial Systems
General Electric Company
41 Woodford Ave., Plainville, CT 06062
GEH5629 R05 0801 © 2001 General Electric Company