Garmin GPSMAP 67 User guide

GPSMAP® 67

Owner’s Manual

© 2023 Garmin Ltd. or its subsidiaries

All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change
or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to

www.garmin.com for current updates and supplemental information concerning the use of this product.

Garmin®, the Garmin logo, ANT+®, Auto Lap®, AutoLocate®, City Navigator®, GPSMAP®, inReach®, TracBack®, VIRB®, and Xero® are trademarks of Garmin Ltd. or its subsidiaries,
registered in the USA and other countries. BaseCamp™, chirp™, Connect IQ™, Garmin Connect™, Garmin Explore™, Garmin Express™, Garmin HuntView™, and tempe™ are
trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.

Android™ is a trademark of Google Inc. Apple®, iPhone®, and Mac® are trademarks of Apple Inc., registered in the U.S. and other countries. The BLUETOOTH® word mark and logos
are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. iOS® is a registered trademark of Cisco Systems, Inc. used under license by Apple Inc.
microSD® and the microSDHC logo are trademarks of SD-3C, LLC. NMEA® is a registered trademark of the National Marine Electronics Association. Wi‑Fi® is a registered mark of
Wi-Fi Alliance Corporation. Windows® is a registered trademark of Microsoft Corporation in the United States and other countries. Other trademarks and trade names are those of their
respective owners.

Table of Contents

Introduction......................................1

GPSMAP 67 Device Overview.................1

Charging the GPSMAP 67 Device.......2

Buttons.....................................................3

Turning On the Device......................... 3

Locking the Buttons............................ 3

Turning On the Backlight.....................3

Adjusting the Backlight....................... 4

Acquiring Satellite Signals...................... 4

GPS and Other Satellite Systems....... 4

Using the Main Pages....................... 4

Opening the Main Menu..........................4

Map.......................................................... 4

Navigating with the Map..................... 5

Measuring Distance on the Map........ 5

Map Page Settings.............................. 5

Map Settings.................................... 5

Advanced Map Settings.................. 6

Compass.................................................. 6

Navigating with the Compass............ 6

Using the Course Pointer.................... 7

Navigating with Sight 'N Go................ 7

Projecting a Waypoint from Your

Current Location.................................. 8

Compass Settings............................... 8

Calibrating the Compass.................8

Heading Settings............................. 9

Trip Computer......................................... 9

Trip Computer Settings....................... 9

Altimeter.................................................. 9

Altimeter Plot Settings...................... 10

Altimeter Settings.......................... 10

Calibrating the Barometric

Altimeter.........................................10

Navigation...................................... 10

FIND Page.............................................. 10

Navigating to a Destination.............. 11

Stopping Navigation...................... 11

Finding a Location Near Another

Location............................................. 11

Waypoints.............................................. 11

Saving Your Current Location as a

Waypoint............................................ 11

Saving a Location on the Map as a

Waypoint............................................ 11

Navigating to a Waypoint..................11

Finding a Saved Waypoint................ 12

Editing a Waypoint............................ 12

Deleting a Waypoint.......................... 12

Changing the Photo for a

Waypoint............................................ 12

Increasing the Accuracy of a Waypoint

Location............................................. 12

Projecting a Waypoint from a Saved

Waypoint............................................ 13

Moving a Waypoint on the Map........13

Finding a Location Near a

Waypoint............................................ 13

Setting a Waypoint Proximity

Alarm.................................................. 13

Adding a Waypoint to a Route.......... 14

Repositioning a Waypoint to Your

Current Location................................ 14

Routes.................................................... 14

Creating a Route Using Route

Planner............................................... 14

Creating a Route Using the Map.......14

Navigating a Saved Route.................14

Viewing the Active Route.............. 15

Editing a Route.................................. 15

Editing the Name of a Route.............15

Viewing a Route on the Map............. 15

Viewing the Elevation Plot of a

Route.................................................. 15

Reversing a Route............................. 16

Deleting a Route................................ 16

Recordings.............................................16

Recording Settings............................ 16

Advanced Recording Settings...... 16

Auto Save Settings........................ 17

Viewing the Current Activity............. 17

Navigating Using TracBack®........... 17

Stopping the Current Activity............17

Saving the Current Activity............... 18

Viewing Saved Activity

Information.................................... 18

Saving a Location from an Activity

as a Waypoint................................ 18

Creating a Track from a Saved

Activity............................................18

Reversing an Activity..................... 18

Table of Contents i

Navigating a Saved Activity.......... 18

Deleting a Saved Activity...............19

Courses.................................................. 19

Creating a Course..............................19

Creating a Course Using the Map.... 19

Navigating a Saved Course...............19

Editing a Course................................ 20

Editing the Name of a Course.......... 20

Viewing a Saved Course on the

Map.................................................... 20

Viewing the Elevation Plot of a

Course................................................ 20

Reversing a Course........................... 21

Creating a Track or Route from a

Saved Course.....................................21

Deleting a Course.............................. 21

Optional Maps....................................... 21

Purchasing Additional Maps............ 21

Finding an Address........................... 21

Connected Features....................... 22

Connected Feature Requirements....... 22

Pairing a Smartphone with Your

Device.................................................... 23

Phone Notifications.............................. 23

Viewing Phone Notifications............ 23

Hiding Notifications.......................... 23

Managing Notifications.................... 23

Connecting to a Wireless Network.......23

Connect IQ Features............................. 23

Downloading Connect IQ Features.. 24

Downloading Connect IQ Features

Using Your Computer........................ 24

Viewing Connect IQ Widgets............ 24

Garmin Explore...................................... 24

Main Menu Tools............................25

Viewing an Active Weather Forecast... 26

Viewing an Active Weather Map...... 26

Adding an Active Weather

Location............................................. 26

Switching the Active Weather

Location......................................... 27

Deleting an Active Weather

Location......................................... 27

Garmin Adventures............................... 27

Sending Files to and from

BaseCamp......................................... 27

Creating an Adventure...................... 27

Starting an Adventure....................... 28

Calculating the Size of an Area............ 28

Using the Flashlight.............................. 28

Geocaches............................................. 28

Registering Your Device at

Geocaching.com............................... 29

Connecting to Geocaching.com... 29

Downloading Geocaches Using a

Computer........................................... 29

Searching for a Geocache................ 29

Searching for a Geocache on the

Map.................................................... 30

Filtering the Geocache List............... 30

Saving a Custom Geocache

Filter................................................30

Editing a Custom Geocache

Filter................................................30

Viewing Geocache Details................ 30

Navigating to a Geocache................ 31

Using Hints and Clues to find a

Geocache....................................... 31

Logging the Attempt......................... 31

chirp................................................... 31

Enabling chirp Searching.............. 31

Finding a Geocache with a chirp.. 31
Removing Live Geocache Data from

the Device.......................................... 32

Removing Your Device Registration

From Geocaching.com..................... 32

Marking and Starting Navigation to a

Man Overboard Location...................... 32

Downloading Maps............................... 32

Enabling Maps................................... 33

Deleting a Map...................................33

Selecting a Profile................................. 33

Setting a Proximity Alarm..................... 33

Editing or Deleting a Proximity

Alarm.................................................. 33

Satellite Page........................................ 33

GPS Satellite Settings....................... 34

Sending and Receiving Data

Wirelessly.............................................. 34

Using the VIRB Remote.........................34

Using the inReach Remote................... 35

Customizing the Device.................. 35

Customizing the Data Fields................ 35

ii Table of Contents

Setup Menu........................................... 36

System Settings................................ 36

Satellite Settings............................36

Display Settings................................. 37

Turning Off the Screen.................. 37

Changing the Color Mode............. 37

Bluetooth Settings............................. 37

Wi‑Fi Settings..................................... 37

Routing Settings................................ 38

Advanced Routing Settings...........38

Turning On Expedition Mode............ 38

Setting the Device Tones.................. 38

Geocaching Settings......................... 39

Pairing Your Wireless Sensors......... 39

Fitness Settings................................. 39

Marking Laps by Distance.............39

Marine Settings................................. 40

Setting Up Marine Alarms............. 40

Menu Settings....................................40

Customizing the Main Menu......... 40

Changing the Page Sequence.......41

Configuring the Page Ribbon

Display............................................ 41

Position Format Settings.................. 41

Changing the Units of Measure........ 42

Time Settings.................................... 42

Profiles............................................... 42

Creating a Custom Profile.............42

Editing a Profile Name.................. 42

Deleting a Profile........................... 43

Resetting Data and Settings............. 43

Restoring Default Page Settings.. 43

Transferring Files to Your Device..... 46

Deleting Files..................................... 46

Disconnecting the USB Cable........... 46

Specifications........................................47

Viewing E-label Regulatory and

Compliance Information....................... 47

Appendix........................................ 48

Data Fields............................................. 48

Optional Accessories............................ 50

tempe................................................. 50

Tips for Pairing Wireless Sensors.... 51

Troubleshooting.................................... 51

Maximizing Battery Life.................... 51

Long-Term Storage........................... 51

Restarting the Device........................ 51

About Heart Rate Zones....................... 51

Fitness Goals..................................... 51

Heart Rate Zone Calculations...........52

Device Information......................... 43

Product Updates................................... 43

Setting Up Garmin Express............... 43

Getting More Information..................... 44

Attaching the Carabiner Clip................ 44

Removing the Carabiner Clip............ 44

Attaching a Lanyard.............................. 44

Device Care............................................45

Cleaning the Device...........................45

Data Management................................ 45

File Types........................................... 45

Installing a Memory Card..................45

Connecting the Device to Your

Computer........................................... 46

Table of Contents iii

Introduction

WARNING

See the Important Safety and Product Information guide in the product box for product warnings and other
important information.

GPSMAP 67 Device Overview

GNSS antenna

Status LED

Power button

Buttons

USB port (under weather cap)

Flashlight

microSD® card slot (under weather cap)

Mounting spine

Introduction 1

Charging the GPSMAP 67 Device

NOTICE

To prevent corrosion, thoroughly dry the USB port, the weather cap, and the surrounding area before charging or
connecting to a computer.

NOTE: The device does not charge when it is outside the approved temperature range (Specifications,

page47).

1 Lift the weather cap .

2 Plug the small end of the power cable into the charging port on the device.
3 Plug the other end of the power cable into a compatible AC power adapter.
4 Plug the AC power adapter into a standard wall outlet.

The device displays the current battery charge level.

2 Introduction

Buttons

FIND

MARK Press to save your current location as a waypoint.

QUIT

ENTER

MENU

PAGE Press to scroll through the main pages.

Press to open the search menu.
Hold to mark your current location as a man overboard (MOB) location and activate navigation.

Press to cancel or return to the previous menu or page.
Press to scroll through the main pages.

Press to choose options and acknowledge messages.
Press to control the current activity recording (from the main pages).

Press to open the options menu for the page that is currently open.
Press twice to open the main menu (from any page).

Press to select menu options and move the map cursor.

Press to zoom in on the map.

Press to zoom out on the map.

Turning On the Device

Press and hold

.

Locking the Buttons

You can lock the keypad to prevent inadvertent button presses.

1 Press
2 Select Lock Keys.

to open the status page.

Turning On the Backlight

Press any button to turn on the backlight.
The backlight turns on automatically when alerts and messages are displayed.

Introduction 3

Adjusting the Backlight

1 Press
2 Use and to adjust the brightness.

NOTE: To maximize battery life, the screen turns off automatically when the backlight times out. You can

select Setup > Display to customize the backlight and display settings.

to open the status page.

Acquiring Satellite Signals

It may take 30 to 60 seconds to acquire satellite signals.

1 Go outdoors to an open area.
2 If necessary, turn on the device.
3 Wait while the device searches for satellites.

flashes while the device determines your GNSS location.

in the status bar shows the satellite signal strength.

When the device acquires satellite signals, it automatically starts recording your path as an activity.

GPS and Other Satellite Systems

Using GPSand another satellite system together offers increased performance in challenging environments and
faster position acquisition than using GPS only. However, using multiple systems can reduce battery life more
quickly than using GPS only.

Your device can use these Global Navigation Satellite Systems (GNSS). Multi-band systems use multiple
frequency bands and allow for more consistent track logs, improved positioning, improved multi-path errors,
and fewer atmospheric errors when using the device in challenging environments.

NOTE: You can view satellite locations and available satellite systems on the satellite page (

page33).

GPS: A satellite constellation built by the United States.
GPS multi-band: A satellite constellation built by the United States, using the enhanced L5 signal.
GLONASS: A satellite constellation built by Russia.
GALILEO: A satellite constellation built by the European Space Agency.
GALILEO multi-band: A satellite constellation built by the European Space Agency, using the enhanced L5

signal.

QZSS multi-band: A satellite constellation built by Japan, using the enhanced L5 signal.
IRNSS (NavIC): A satellite constellation built by India, using the enhanced L5 signal.

Satellite Page,

Using the Main Pages

The information needed to operate this device is found on the main menu, map, compass, and trip computer
pages.

Press PAGE or QUIT to scroll through the main pages.
The page displayed in the middle opens automatically.

Opening the Main Menu

The main menu gives you access to tools and setup screens for waypoints, activities, routes, and more (Main

Menu Tools, page25, Setup Menu, page36).

From any page, press MENU twice.

Map

represents your location on the map. As you travel, moves and displays your path. Depending on your zoom
level, waypoint names and symbols may appear on the map. You can zoom in on the map to see more detail.
When you are navigating to a destination, your route is marked with a colored line on the map.

4 Using the Main Pages

Navigating with the Map

1 Begin navigating to a destination (
2 Press PAGE to scroll to the map page.

A blue triangle represents your location on the map. As you travel, the blue triangle moves and displays your
path.

3 Complete one or more actions:

• To view different areas of the map, press , , , or .

• To zoom in and out of the map, press and .

• To view more information about a waypoint on the map (represented by an icon) or other location, move
the map cursor to the location, and press ENTER.

Navigating to a Destination, page11).

Measuring Distance on the Map

You can measure the distance between multiple locations.

1 Press PAGE to scroll to the map page.
2 Press MENU.
3 Select Measure Distance.
4 Press

The measured distance appears.

5 Press ENTER to select additional locations on the map.

, , , and to move the map cursor to a location.

Map Page Settings

Press PAGE to scroll to the map page, and press MENU.
Show Dashboard: Allows you to show or hide the dashboard after setting one to display on the map (

Settings, page5).

Stop Navigation: Stops navigating the current route.
Map Setup: Allows you to customize additional map settings (Map Settings, page5).
Measure Distance: Allows you to measure the distance between multiple locations (Measuring Distance on the

Map, page5).

Change Data Fields: Allows you to customize the data fields on the dashboard.
Restore Defaults: Restores the map to factory default settings.

Map

Map Settings

Press PAGE to scroll to the map page, and press MENU. Select Map Setup.
Map Manager: Shows the downloaded map versions. With an Outdoor Maps+ subscription, allows you to

download additional maps (

Orientation: Adjusts how the map is shown on the page (Changing the Map Orientation, page6).
Dashboard: Sets a dashboard to display on the map. Each dashboard shows different information about your

route or your location.
NOTE: Your customized settings are remembered by the dashboard. Your settings are not lost when you

change profiles (Profiles, page42).

Guidance Text: Sets when the guidance text is shown on the map.
Advanced Setup: Allows you to customize advanced map settings (Advanced Map Settings, page6).

Using the Main Pages 5

Downloading Maps, page32).

Changing the Map Orientation

1 Press PAGE to scroll to the map page.
2 Press MENU.
3 Select Map Setup > Orientation.
4 Select an option:

• Select North Up to show north at the top of the page.

• Select Track Up to show your current direction of travel at the top of the page.

• Select Automotive Mode to show an automotive perspective with the direction of travel at the top.

Advanced Map Settings

Press PAGE to scroll to the map page, and press MENU. Select Map Setup > Advanced Setup.
Auto Zoom: Automatically selects the appropriate zoom level for optimal use on your map. When Off is

selected, you must zoom in or out manually.

Detail: Sets the amount of detail shown on the map. Showing more detail may cause the map to redraw more

slowly.

Shaded Relief: Shows detail relief on the map, if available, or turns off shading.
Vehicle: Sets the position icon, which represents your position on the map. The default icon is a small blue

triangle.

Zoom Levels: Adjusts the zoom level at which map items appear. The map items do not appear when the map

zoom level is higher than the selected level.

Text Size: Sets the text size for map items.

Compass

When navigating, points to your destination, regardless of the direction you are moving. When points
toward the top of the electronic compass, you are traveling directly toward your destination. If points any
other direction, turn until it points toward the top of the compass.

Navigating with the Compass

When navigating to a destination,

1 Begin navigating to a destination (Navigating to a Destination, page11).
2 Press PAGE to scroll to the compass page.
3 Turn until points toward the top of the compass, and continue moving in that direction to the destination.

points to your destination, regardless of the direction you are moving.

6 Using the Main Pages

Using the Course Pointer

The course pointer is most useful when you are navigating to your destination in a straight line, such as when
you are navigating on water. It can help you navigate back to the course line when you go off-course to avoid
obstacles or hazards.

1 Press PAGE to scroll to the compass page.
2 Press MENU.
3 Select Heading Setup > Go To Line (Pointer) > Course (CDI) to enable the course pointer.

Course line pointer. Indicates the direction of the desired course line from your starting point to your
next waypoint.

Course deviation indicator (CDI). Indicates the location of the desired course line in relation to your
location. If the CDI is aligned with the course line pointer, you are on course.

Course deviation distance. The dots indicate your distance off course. The distance represented by
each dot is indicated by the scale in the upper-right corner.

To-and-from indicator. Indicates whether you are headed to or away from the next waypoint.

Navigating with Sight 'N Go

You can point the device at an object in the distance with the compass direction locked in, project the object as
a waypoint, and navigate using the object as a reference point.

1 Press PAGE to scroll to the compass page.
2 Press MENU.
3 Select Sight 'N Go.
4 Point the device at an object.
5 Select Lock Direction > Set Course.
6 Navigate using the compass.

Using the Main Pages 7

Projecting a Waypoint from Your Current Location

You can save a new waypoint by projecting the distance from your current location.
For example, if you would like to navigate to a location you observe on the other side of a river or stream,

you can project a waypoint from your current location to the observed location, and then navigate to the new
location after you cross the river or stream.

1 Press PAGE to scroll to the compass page.
2 Press MENU.
3 Select Sight 'N Go.
4 Point the device at the new location.
5 Select Lock Direction > Project Waypoint.
6 Select a unit of measure.
7 Enter the distance, and select Done.
8 Select Save.

Compass Settings

Press PAGE to scroll to the compass page, and press MENU.
Sight 'N Go: Allows you to point the device at an object in the distance, and navigate using the object as a

reference point (

Stop Navigation: Stops navigation of the current route.
Change Dashboard: Changes the theme and information displayed on the dashboard.

NOTE: Your customized settings are remembered by the dashboard. Your settings are not lost when you

change profiles (Profiles, page42).

Set Scale: Sets the scale for the distance between the dots on the course deviation indicator when navigating

with Sight 'N Go.

Calibrate Compass: Allows you to calibrate the compass if you experience irregular compass behavior. For

example, after moving long distances or after extreme temperature changes (Calibrating the Compass,

page8).

Heading Setup: Allows you to customize the compass heading settings (Heading Settings, page9).
Change Data Fields: Allows you to customize the compass data fields.
Restore Defaults: Restores the compass to factory default settings.

Navigating with Sight 'N Go, page7).

Calibrating the Compass

Before you can calibrate the electronic compass, you must be outdoors, away from objects that influence
magnetic fields, such as cars, buildings, or overhead power lines.

The GPSMAP 67 device has a 3-axis electronic compass. You should calibrate the compass after moving long
distances or experiencing temperature changes.

1 Press PAGE to scroll to the compass page.
2 Press MENU.
3 Select Calibrate Compass > Start.
4 Follow the on-screen instructions.

8 Using the Main Pages

Heading Settings

Press PAGE to scroll to the compass page, and press MENU. Select Heading Setup.
Display: Sets the directional heading on the compass to letters, degrees, or milliradians.
North Reference: Sets the north reference used on the compass (
Go To Line (Pointer): Sets the behavior of the pointer that appears on the map. Bearing points in the direction of

your destination. Course (CDI) shows your relationship to the course line leading to the destination.

Compass: Automatically switches from an electronic compass to a GPS compass when you are traveling at a

higher rate of speed for a period of time.

Calibrate Compass: Allows you to calibrate the compass if you experience irregular compass behavior. For

example, after moving long distances or after extreme temperature changes (Calibrating the Compass,

page8).

Setting the North Reference, page9).

Setting the North Reference

You can set the directional reference used in calculating heading information.

1 Press PAGE to scroll to the compass page.
2 Press MENU.
3 Select Heading Setup > North Reference.
4 Select an option:

• To set geographic north as the heading reference, select True.

• To set the magnetic declination for your location automatically, select Magnetic.

• To set grid north (000 degrees) as the heading reference, select Grid.

• To set the magnetic variation value manually, select User, enter the magnetic variance, and select Done.

Trip Computer

The trip computer displays your current speed, average speed, trip odometer, and other helpful statistics. You
can customize the trip computer layout, dashboard, and data fields.

Trip Computer Settings

Press PAGE to scroll to the trip computer page, and press MENU.
Reset: Resets all the trip computer values to zero. For accurate information, reset the trip information before

beginning a trip.

Change Data Fields: Customizes the trip computer data fields.
Change Dashboard: Changes the theme and information displayed on the dashboard.

NOTE: Your customized settings are remembered by the dashboard. Your settings are not lost when you

change profiles (

Insert Page: Inserts an additional page of customizable data fields.

TIP: You can use the arrow buttons to scroll through the pages.
Remove Page: Removes an additional page of customizable data fields.
More Data: Adds additional data fields to the trip computer.
Less Data: Removes data fields from the trip computer.
Restore Defaults: Restores the trip computer to its factory default settings.

Profiles, page42).

Altimeter

By default, the altimeter displays the elevation over the distance traveled. You can customize altimeter settings
(Altimeter Settings, page10). You can select any point on the plot to view details about that point.

Using the Main Pages 9

Altimeter Plot Settings

Press PAGE to scroll to the altimeter page, and press MENU.
Reset: Resets the altimeter data, including waypoint, track, and trip data.
Altimeter Setup: Enables you to open additional altimeter settings (
Adjust Zoom Ranges: Adjusts the zoom ranges shown on the altimeter page.
Change Data Fields: Allows you to customize the altimeter data fields.
Restore Defaults: Restores the altimeter to factory default settings.

Altimeter Settings

Press PAGE to scroll to the altimeter page, and press MENU. Select Altimeter Setup.
Auto Calibration: Once allows the altimeter to automatically calibrate one time when you start an activity.

Continuous allows the altimeter to calibrate throughout the duration of your activity.
Barometer Mode: Variable Elevation allows the barometer to measure changes in elevation while you are

moving. Fixed Elevation assumes the navigator is stationary at a fixed elevation, so the barometric pressure

should only change due to weather.
Pressure Trending: Sets how the navigator records pressure data. Save Always records all pressure data, which

can be helpful when you are watching for pressure fronts.
Plot Type: Records elevation changes over a period of time or distance, records barometric pressure over a

period of time, or records ambient pressure changes over a period of time.
Calibrate Altimeter: Allows you to manually calibrate the barometric altimeter (

Altimeter, page10).

Altimeter Settings, page10).

Calibrating the Barometric

Calibrating the Barometric Altimeter

You can manually calibrate the barometric altimeter if you know the correct elevation or the correct barometric
pressure.

1 Go to a location where the elevation or barometric pressure is known.
2 Press PAGE to scroll to the altimeter page.
3 Press MENU.
4 Select Altimeter Setup > Calibrate Altimeter.
5 Select Method to select the measurement to use in calibration.
6 Enter the measurement.
7 Select Calibrate.

Navigation

You can use the GPS navigation features on your device to navigate a saved activity, route, or course.

• Your device records your path as an activity. Activities use corridor navigation. When navigating a saved

activity, it cannot be recalculated (Recordings, page16).

• A route is a sequence of waypoints or locations that leads you to your destination. If you depart from the

original route, the device recalculates the route and provides new directions (Routes, page14).

• A course can have multiple destinations, and can be created point to point or on routable roads. When

navigating a saved course, you can choose to navigate using the direct path with no map adjustments or

recalculations, or following roads and trails with recalculations as needed. You can convert saved activities

and routes to courses (Courses, page19).

FIND Page

You can use the Find page to find a destination to navigate to. Not all FIND categories are available in all areas
and maps.

10 Navigation

Navigating to a Destination

1 Press FIND.
2 Select a category.
3 If necessary, press MENU to narrow the search.
4 If necessary, select Spell Search, and enter the destination name or part of the name.
5 Select a destination.
6 Select Go.

Your route appears as a magenta line on the map.

7 Navigate using the map (

page6).

Navigating with the Map, page5) or compass (Navigating with the Compass,

Stopping Navigation

1 Press FIND.
2 Select Stop Navigation.

Finding a Location Near Another Location

1 Press FIND.
2 Press MENU.
3 Select Search Near, and select an option.
4 Select a location.

Waypoints

Waypoints are locations you record and store in the device. Waypoints can mark where you are, where you are
going, or where you have been. You can add details about the location, such as name, elevation, and depth.

You can add a .gpx file that contains waypoints by transferring the file to the GPX folder (Transferring Files to

Your Device, page46).

Saving Your Current Location as a Waypoint

1 Press MARK.
2 If necessary, select a field to edit information about the waypoint, such as the name or location.
3 Select Save.

Saving a Location on the Map as a Waypoint

You can save a location on the map as a waypoint.

1 Press PAGE to scroll to the map page.
2 Press

An information bar appears at the top of the screen.

3 Press ENTER.
4 Press MENU.
5 Select Save as Waypoint.

Navigating to a Waypoint

1 Press FIND.
2 Select Waypoints.
3 Select a waypoint.
4 Select Go.

By default, your route to the waypoint appears as a straight, colored line on the map.

, , , or to move the cursor to a location.

Navigation 11

Finding a Saved Waypoint

1 Press MENU twice to open the main menu.
2 Select Waypoint Manager.
3 If necessary, press MENU to narrow the search.
4 If necessary, select an option:

• Select Spell Search to search using the name of the waypoint.

• Select Search Near to search near a recently found location, another waypoint, your current location, or a
point on the map.

• Select Sort to view the list of waypoints based on nearest distance or alphabetical order.

5 Select a waypoint from the list.

Editing a Waypoint

1 Press MENU twice to open the main menu.
2 Select Waypoint Manager.
3 Select a saved waypoint.
4 Select an item to edit, such as the name or location.
5 Enter the new information, and select Done.

Deleting a Waypoint

1 Press MENU twice to open the main menu.
2 Select Waypoint Manager.
3 Select a waypoint.
4 Press MENU.
5 Select Delete.

Changing the Photo for a Waypoint

1 Press MENU twice to open the main menu.
2 Select Waypoint Manager.
3 Select a waypoint.
4 Press MENU.
5 Select Change Photo.
6 Select a photo.
7 Select Use.

Increasing the Accuracy of a Waypoint Location

You can refine the accuracy of a waypoint location by averaging the location data. When averaging, the device
takes several GPS readings at the same location and uses the average value to provide more accuracy.

1 Press MENU twice to open the main menu.
2 Select Waypoint Manager.
3 Select a waypoint.
4 Press MENU.
5 Select Average Location.
6 Move to the waypoint location.
7 Select Start.
8 Follow the on-screen instructions.
9 When the confidence status bar reaches 100%, select Save.

For best results, collect four to eight samples for the waypoint, waiting at least 90 minutes between samples.

12 Navigation

Projecting a Waypoint from a Saved Waypoint

You can save a new waypoint by projecting the distance and bearing from a saved waypoint to a new location.

1 Press MENU twice to open the main menu.
2 Select Waypoint Manager.
3 Select a waypoint.
4 Press MENU.
5 Select Project Waypoint.
6 Enter the bearing, and select Done.
7 Select a unit of measure.
8 Enter the distance, and select Done.
9 Select Save.

Moving a Waypoint on the Map

1 Press MENU twice to open the main menu.
2 Select Waypoint Manager.
3 Select a waypoint.
4 Press MENU.
5 Select Move Waypoint.
6 Press
7 Select Move.

, , , or to move the cursor to a new location on the map.

Finding a Location Near a Waypoint

1 Press MENU twice to open the main menu.
2 Select Waypoint Manager.
3 Select a waypoint.
4 Press MENU.
5 Select Find Near Here.
6 Select a category.

The list displays locations near the selected waypoint.

Setting a Waypoint Proximity Alarm

You can add a proximity alarm for a waypoint. Proximity alarms alert you when you are within a specified range
of a particular location.

1 Press MENU twice to open the main menu.
2 Select Waypoint Manager.
3 Select a waypoint.
4 Press MENU.
5 Select Set Proximity.
6 Enter the radius.

When you enter an area with a proximity alarm, the device sounds a tone.

Navigation 13

Adding a Waypoint to a Route

1 Press MENU twice to open the main menu.
2 Select Waypoint Manager.
3 Select a waypoint.
4 Press MENU.
5 Select Add to Route.
6 Select a route.

Repositioning a Waypoint to Your Current Location

You can change the position of a waypoint. For example, if you move your vehicle, you can change the location
to your current position.

1 Press MENU twice to open the main menu.
2 Select Waypoint Manager.
3 Select a waypoint.
4 Press MENU.
5 Select Reposition Here.

The waypoint location changes to your current location.

Routes

A route is a sequence of waypoints or locations that leads you to your final destination. Routes are saved as
GPX files on the device.

Creating a Route Using Route Planner

A route can include many waypoints, and it should include at least a starting point and one destination.

1 Press MENU twice to open the main menu.
2 Select Route Planner > Create Route > Select First Point.
3 Select a category.
4 Select the first point in the route.
5 Select Use.
6 Select Select Next Point to add additional points to the route.
7 Select QUIT to save the route.

Creating a Route Using the Map

1 Press MENU twice to open the main menu.
2 Select Route Planner > Create Route > Select First Point > Use Map.
3 Press
4 Select Use.
5 Repeat steps 3 and 4 to select additional points on the map to add to the route (optional).
6 Select QUIT.

, , , or to select a point on the map.

Navigating a Saved Route

1 Press FIND.
2 Select Routes.
3 Select a route.
4 Select Go.

By default, your route appears as a straight, colored line on the map.

14 Navigation

Viewing the Active Route

1 Begin navigating a route (
2 Press MENU twice to open the main menu.
3 Select Active Route.
4 Select a point in the route to view additional details.

Navigating a Saved Route, page14).

Editing a Route

You can add, remove, or rearrange points on a route.

1 Press MENU twice to open the main menu.
2 Select Route Planner.
3 Select a route.
4 Press MENU.
5 Select Edit Route.
6 Select a point.
7 Select an option:

• To view the point on the map, select Review.

• To change the order of the points on the route, select Move Up or Move Down.

• To insert an additional point on the route, select Insert.
The additional point is inserted before the point you are editing.

• To remove the point from the route, select Remove.

8 Select QUIT to save the route.

Editing the Name of a Route

You can customize the name of a route to make it distinct.

1 Press MENU twice to open the main menu.
2 Select Route Planner.
3 Select a route.
4 Press MENU.
5 Select Change Name.
6 Enter the new name.

Viewing a Route on the Map

1 Press MENU twice to open the main menu.
2 Select Route Planner.
3 Select a route.
4 Select the map tab.

Viewing the Elevation Plot of a Route

The elevation plot displays the elevations for a route based on your route setting. If your navigator is configured
for direct routing, the elevation plot displays the straight-line elevations between route points. If your navigator
is configured for on-road routing, the elevation plot displays the elevations along the roads included in your
route.

1 Press MENU twice to open the main menu.
2 Select Route Planner.
3 Select a route.
4 Select the elevation plot tab.

Navigation 15

Reversing a Route

You can switch the start and end points of your route to navigate the route in reverse.

1 Press MENU twice to open the main menu.
2 Select Route Planner.
3 Select a route.
4 Press MENU.
5 Select Reverse Route.

Deleting a Route

1 Press MENU twice to open the main menu.
2 Select Route Planner.
3 Select a route.
4 Press MENU.
5 Select Delete.

Recordings

Your device records your path as an activity. Activities contain information about points along your recorded
path, including time and location for each point. Activities are saved as FIT files on the device.

Recording Settings

Press MENU twice to open the main menu. Select Setup > Recording.
Record Method: Sets the recording method. The Auto option records points at a variable rate to create an

optimum representation of your path. You can also record points at specific time or distance intervals.

Interval: Sets the recording rate. Recording points more frequently creates a more-detailed path, but fills the

recording log faster.

Auto Pause: Sets the device to stop recording your path when you are not moving.
Auto Start: Sets the device to start a new recording automatically when the previous recording ends.
Activity Type: Sets the default activity type for the device.
Advanced Setup: Allows you to customize additional recording settings (

page16).

Advanced Recording Settings,

Advanced Recording Settings

Press MENU twice to open the main menu. Select Setup > Recording > Advanced Setup.
Output Format: Sets the device to save the recording as a FIT or a GPX and FIT file (

FIT option records your activity with fitness information that is tailored for the Garmin Connect™ application
and can be used for navigation. The FIT and GPX option records your activity as both a traditional track that
can be viewed on the map and used for navigation, and as an activity with fitness information.

Auto Save: Sets an automated schedule to save your recordings. This helps organize your trips and save

memory space (Auto Save Settings, page17).

Trip Recording: Sets a trip recording option.
Recorded Data Reset: Sets a reset option. The Activity and Trip option resets the recording and trip data when

you finish the active recording. The Prompted option prompts you to select the data to reset.

16 Navigation

File Types, page45). The

Auto Save Settings

Press MENU twice to open the main menu. Select Setup > Recording > Advanced Setup > Auto Save.
When Full: Automatically saves the current recording and starts a new one when the current recording is near

20,000 track points.

Daily: Automatically saves the previous day's recording and starts a new one when you turn on the device on a

new day.

Weekly: Automatically saves the previous week's recording and starts a new one when you turn on the device

on a new week.

Auto: Automatically saves the current recording based on its length and the number of track points taken.
Never: Never saves the current recording automatically. When the current recording nears 20,000 track points,

the device filters the active track to remove redundant points while retaining the shape and history of the
recording. Unfiltered points are saved in a temporary GPX and FIT file that is saved or discarded when the
recording stops.

NOTE: When importing FIT activities or GPX tracks with more than 20,000 track points, the device filters the
line to fit in the device memory and improve map drawing performance, while retaining the shape and history
of the recording. The FIT and GPX files retain all of their original track points.

Viewing the Current Activity

By default, the device automatically starts recording your path as an activity when it is turned on and has
acquired satellite signals. You can pause and start recording manually.

1 Press MENU twice to open the main menu.
2 Select Recording Controls.
3 Press

• To control the current activity recording, select .

• To view data fields for the activity, select .

• To view the current activity on the map, select .

• To view the elevation plot for the current activity, select .

and to view an option:

Navigating Using TracBack

While recording, you can navigate back to the beginning of your activity. This can be helpful when finding your
way back to camp or the trail head.

1 Press MENU twice to open the main menu.
2 Select Recording Controls.
3 Press
4 Select TracBack.

The map displays your route with a magenta line, start point, and end point.

5 Navigate using the map (Navigating with the Map, page5) or compass (Navigating with the Compass,

page6).

to switch to the map tab.

®

Stopping the Current Activity

1 From the main pages, press ENTER.
2 Select Stop.
3 Select an option:

• To resume recording, select Resume.

• To save the activity, select

TIP: You can view the saved activity by pressing MENU twice to view the main menu, and selecting
Recorded Activities.

• To delete the activity and reset the trip computer, select

.

.

Navigation 17

Saving the Current Activity

1 Press MENU twice to open the main menu.
2 Select Recording Controls >
3 Select an option:

• Select Save to save the entire activity.

• Press MENU, select Save Portion, and select a portion.

Viewing Saved Activity Information

1 Press MENU twice to open the main menu.
2 Select Recorded Activities.
3 Select an activity.
4 Select
5 Select to view the activity on a map.

The beginning and the end of the trail are marked by flags.

to view information about the activity, such as time and distance.

Saving a Location from an Activity as a Waypoint

1 Press MENU twice to open the main menu.
2 Select Recorded Activities.
3 Select an activity.
4 Select
5 Press , , , or to move the cursor to a location.

An information bar appears at the top of the screen.

6 Press ENTER.
7 Press MENU.
8 Select Save as Waypoint.

.

.

Creating a Track from a Saved Activity

You can create a track from a saved activity. Tracks are saved using different file types than activities (

Types, page45). This allows you to share your track wirelessly with other compatible Garmin® devices.

1 Press MENU twice to open the main menu.
2 Select Recorded Activities.
3 Select an activity.
4 Press MENU.
5 Select Save as Track.

Reversing an Activity

You can switch the start and end points of your activity to navigate the activity in reverse.

1 Press MENU twice to open the main menu.
2 Select Recorded Activities.
3 Select an activity.
4 Press MENU.
5 Select Copy Reversed.

Navigating a Saved Activity

1 Press MENU twice to open the main menu.
2 Select Recorded Activities.
3 Select an activity.
4 Select
5 Select Go.

.

File

18 Navigation

Deleting a Saved Activity

1 Press MENU twice to open the main menu.
2 Select Recorded Activities.
3 Select an activity.
4 Press MENU.
5 Select Delete.

Courses

A course can have multiple destinations, and can be navigated point to point or on routable roads. Courses are
saved as FIT files on the device.

Creating a Course

1 Press MENU twice to open the main menu.
2 Select Course Planner > Create Course.
3 Select a course creation method:

• To create a course with no map adjustments or recalculations, select Direct Path.

• To create a course that adjusts to follow map data and recalculates as needed, select Roads & Trails.

4 Select Select First Point.
5 Select a category.
6 Select the first point in the course.
7 Select Use.
8 Select Select Next Point to add additional points to the course.
9 Select Done.

Creating a Course Using the Map

1 Press MENU twice to open the main menu.
2 Select Course Planner > Create Course.
3 Select a course creation method:

• To create a course with no map adjustments or recalculations, select Direct Path.

• To create a course that adjusts to follow map data and recalculates as needed, select Roads & Trails.

4 Select Select First Point > Use Map.
5 Select a point on the map.
6 Select Use.
7 Move the map, and select additional points on the map to add to the course.
8 Select Done.

Navigating a Saved Course

1 Press FIND.
2 Select Courses.
3 Select a course.
4 Select Go.

By default, your route appears as a straight line on the map.

Navigation 19

Editing a Course

1 Press MENU twice to open the main menu.
2 Select Course Planner.
3 Select a course.
4 Press MENU.
5 Select Edit Course.
6 Select a point.
7 Select an option:

• To view the point on the map, select Review.

• To edit the name of the point, select Edit Name.

• To edit the symbol used to represent the point, select Edit Icon.

• To change the order of the points on the course, select Move Up or Move Down.

• To insert an additional point on the course, select Insert Before.
The additional point is inserted before the point you are editing.

• To receive an alert when you arrive at the point, select Alert on Arrival.
Points with alerts are generally destinations on your course. Points without alerts are used as shaping

points on the course but are not destinations.

• To remove the point from the course, select Remove.

8 Select QUIT to save the course.

Editing the Name of a Course

You can customize the name of a course to make it distinct.

1 Press MENU twice to open the main menu.
2 Select Course Planner.
3 Select a course.
4 Press MENU.
5 Select Change Name.
6 Enter the new name.

Viewing a Saved Course on the Map

1 Press MENU twice to open the main menu.
2 Select Course Planner.
3 Select a course.
4 Select the map tab.

Viewing the Elevation Plot of a Course

The elevation plot displays the elevations for a course based on your routing settings. If your navigator is
configured for direct routing, the elevation plot displays the straight-line elevations between course points.
If your navigator is configured for on-road routing, the elevation plot displays the elevations along the roads
included in your course.

1 Press MENU twice to open the main menu.
2 Select Course Planner.
3 Select a course.
4 Select the elevation plot tab.

20 Navigation

Reversing a Course

You can switch the start and end points of your course to navigate the course in reverse.

1 Press MENU twice to open the main menu.
2 Select Course Planner.
3 Select a course.
4 Press MENU.
5 Select Reverse Course.

Creating a Track or Route from a Saved Course

You can create a track or route from a saved course. The tracks or routes can be navigated using Garmin
devices that do not support course navigation.

1 Press MENU twice to open the main menu.
2 Select Course Planner.
3 Select a course.
4 Press MENU.
5 Select Save as Track or Save as Route.

Deleting a Course

1 Press MENU twice to open the main menu.
2 Select Course Planner.
3 Select a course.
4 Press MENU.
5 Select Delete.

Optional Maps

You can use additional maps with the device, such as Outdoor Maps+, City Navigator®, and Garmin HuntView
Plus detailed maps. Detailed maps may contain additional points of interest, such as restaurants or marine
services. For more information, go to

Purchasing Additional Maps

1 Go to your device product page at
2 Click the Maps tab.
3 Follow the on-screen instructions.

Finding an Address

You can use optional City Navigator maps to search for addresses.

1 Press FIND.
2 Select Addresses.
3 Select Search Area, and enter the country, region, or city.
4 Select Number, and enter the house number.
5 Select Street Name, and enter the street.

buy.garmin.com or contact your Garmin dealer.

www.garmin.com.

™

Navigation 21

Connected Features

Connected features are available for your GPSMAP 67 device when you connect the device to a wireless
network or a compatible phone using Bluetooth® technology. Some features require you to install the Garmin
Explore™ app on your phone. Go to garmin.com/apps for more information.

Garmin Explore: The Garmin Explore app syncs and shares waypoints, courses, and collections with your

device. You can also download maps to your phone for offline access.

Bluetooth sensors: Allows you to connect Bluetooth compatible sensors, such as a heart rate monitor.
Connect IQ™: Allows you to extend your device features with widgets, data fields, and apps using the Connect IQ

app.

EPO Downloads: Allows you to download an extended prediction orbit file to quickly locate GPS satellites and

reduce the time it takes to get an initial GPS fix using the Garmin Explore app or when connected to a Wi‑Fi
network.

Outdoor Maps+: Allows you to download free satellite imagery or premium map data using an Outdoor Maps+

subscription when connected to a Wi‑Fi network.

Live Geocache Data: Provides paid or subscription-free services to view live geocache data from

www

.geocaching.com using the Garmin Explore app or when connected to a Wi‑Fi network.

LiveTrack: Allows friends and family to follow your activities in real time. You can invite followers using email or

social media, allowing them to view your live data on a Garmin Connect tracking page.

Phone notifications: Displays phone notifications and messages on your GPSMAP 67 device using the Garmin

Explore app.

Software Updates: Allows you to receive updates for your device software using the Garmin Explore app or

when connected to a Wi‑Fi network.

Active Weather: Allows you to view current weather conditions and weather forecasts using the Garmin Explore

app or when connected to a Wi‑Fi network.

®

Connected Feature Requirements

Some features require a smartphone and a specific app on your smartphone.

Feature

Activity uploads to Garmin Connect Yes Yes

Software updates Yes Yes

EPO downloads Yes Yes

Live geocache data Yes Yes

Weather Yes Yes

Phone notifications Yes

Connect IQ Yes No

Outdoor Maps+ Yes

Connected to a Paired Smartphone with
the Garmin Connect App

1

2

Connected to a Wi‑Fi Network

No

Yes

3

1

The device receives phone notifications from a paired iOS® phone directly, and through the Garmin Connect app on an Android™ phone.

2

Required to activate your subscription.

3

Required to download maps.

22 Connected Features

Pairing a Smartphone with Your Device

1 Bring your compatible smartphone within 10m (33ft.) of your device.
2 From the main menu on your device, select Setup > Bluetooth.
3 On your compatible smartphone, enable Bluetooth technology, and open the Garmin Explore app.
4 From the app, select the devices option, and follow the on-screen instructions to pair your device.

Phone Notifications

Phone notifications require a compatible smartphone to be paired with the GPSMAP 67 device. When your
phone receives messages, it sends notifications to your device.

Viewing Phone Notifications

Before you can view notifications, you must pair your device with your compatible phone.

1 Press
2 Select Notifications.
3 Select a notification.

Hiding Notifications

By default, notifications appear on the screen when they are received. You can hide notifications to prevent
them from appearing.

1 Press MENU twice to open the main menu.
2 Select Setup > Bluetooth > Notifications > Hide.

to open the status page.

Managing Notifications

You can use your compatible smartphone to manage notifications that appear on your GPSMAP 67 device.

Select an option:

• If you are using an iPhone® device, go to the iOS notifications settings to select the items to show on the
device.

• If you are using an Android smartphone, from the Garmin Connect app, select Settings > Smart
Notifications.

Connecting to a Wireless Network

1 Press MENU twice to open the main menu.
2 Select Setup > Wi-Fi.
3 Select the toggle switch to enable Wi‑Fi technology, if necessary.
4 Select Add Network.
5 Select a wireless network from the list and enter the password, if necessary.

The navigator stores the network information and connects automatically when you return to this location.

Connect IQ Features

You can add Connect IQ features to your device from Garmin and other providers using the Connect IQ app. You
can customize your device with data fields, widgets, and apps.

Data Fields: Allow you to download new data fields that present sensor, activity, and history data in new ways.

You can add Connect IQ data fields to built-in features and pages.

Widgets: Provide information at a glance, including sensor data and notifications.
Apps: Add interactive features to your device, such as new outdoor and fitness activity types.

Connected Features 23

Downloading Connect IQ Features

Before you can download features from the Connect IQ app, you must pair your GPSMAP 67 device with your
smartphone (

1 From the app store on your smartphone, install and open the Connect IQ app.
2 If necessary, select your device.
3 Select a Connect IQ feature.
4 Follow the on-screen instructions.

Pairing a Smartphone with Your Device, page23).

Downloading Connect IQ Features Using Your Computer

1 Connect the device to your computer using a USB cable.
2 Go to
3 Select a Connect IQ feature, and download it.
4 Follow the on-screen instructions.

apps.garmin.com, and sign in.

Viewing Connect IQ Widgets

1 Press
2 Select or to scroll through the widgets.

to open the status page.

Garmin Explore

The Garmin Explore website and app allow you to create courses, waypoints, and collections, plan trips, and use
cloud storage. They offer advanced planning both online and offline, allowing you to share and sync data with
your compatible Garmin device. You can use the app to download maps for offline access, and then navigate
anywhere without using your cellular service.

You can download the Garmin Explore app from the app store on your phone, or you can go to explore.garmin

.com.

24 Connected Features

Main Menu Tools

Press MENU twice to open the main menu.
Active Route: Displays your active route and any upcoming waypoints (Routes, page14).
Active Weather: Displays the current temperature, temperature forecast, weather forecast, weather radar, cloud

cover, and wind conditions (Viewing an Active Weather Forecast, page26).

Adventures: Displays a list of adventures from the BaseCamp™ application (Garmin Adventures, page27).
Alarm Clock: Sets an audible alarm. If you are not currently using the navigator, you can set it to turn on at a

specific time.

Altimeter: Displays the elevation over distance traveled (Altimeter, page9).
Area Calculation: Allows you to calculate the size of an area (Calculating the Size of an Area, page28).
Calculator: Displays a calculator.
Calendar: Displays a calendar.
Collections Manager: Displays collections synced from your Garmin Explore account.
Compass: Displays the compass (Compass, page6).
Connect IQ: Displays a list of installed Connect IQ apps (Connect IQ Features, page23).
Course Planner: Displays a list of saved courses and allows you to create new courses (Courses, page19).
Flashlight: Turns on the flashlight (Using the Flashlight, page28).
Geocaching: Displays a list of downloaded geocaches (Geocaches, page28).
Hunt and Fish: Displays the predicted best dates and times for hunting and fishing at your current location.
inReach Remote: Allows you to send messages using your paired inReach® satellite communicator (Using the

inReach Remote, page35).

Man Overboard: Allows you to save a man overboard (MOB) location and navigate back to it (Marking and

Starting Navigation to a Man Overboard Location, page32).

Map: Displays the map (Map, page4).
Map Manager: Shows the downloaded map versions. With an Outdoor Maps+ subscription, allows you to

download additional maps (Downloading Maps, page32).

Notifications: Alerts you to incoming calls, texts, social network updates, and more, based on your smartphone

notification settings (Phone Notifications, page23).

Photo Viewer: Displays saved photos.
Profile Change: Allows you to change the profile to customize your settings and data fields for a particular

activity or trip (Selecting a Profile, page33).

Proximity Alarms: Allows you to set alerts to sound within range of particular locations (Setting a Proximity

Alarm, page33).

Recorded Activities: Displays your current activity and a list of recorded activities (Recordings, page16).
Recording Controls: Allows you to view details about the current activity and control the current activity

recording (Viewing the Current Activity, page17).

Route Planner: Displays a list of saved routes and allows you to create new routes (Creating a Route Using

Route Planner, page14).

Satellite: Displays your current GPS satellite information (Satellite Page, page33).
Saved Tracks: Displays a list of saved tracks (Creating a Track from a Saved Activity, page18).
Share Wirelessly: Allows you to wirelessly transfer files to another compatible device (Sending and Receiving

Data Wirelessly, page34).

Sight 'N Go: Allows you to point the navigator at an object in the distance, and navigate using the object as a

reference point (Navigating with Sight 'N Go, page7).

Stopwatch: Allows you to use a timer, mark a lap, and time laps.
Sun and Moon: Displays sunrise and sunset times, along with the moon phase, based on your GPS position.
Trip Computer: Displays the trip computer (

Trip Computer, page9).

Main Menu Tools 25

VIRB Remote: Provides camera controls when you have a VIRB® camera paired with your GPSMAP 67 navigator

(Using the VIRB Remote, page34).

Waypoint Averaging: Allows you to refine a waypoint location for more accuracy (Increasing the Accuracy of a

Waypoint Location, page12).

Waypoint Manager: Displays all waypoints saved to the device (Waypoints, page11).
FIND: Allows you to find a destination to navigate to (Navigating to a Destination, page11).
XERO Locations: Displays laser location information when you have a Xero® bow sight paired with your GPSMAP

67 navigator.

Viewing an Active Weather Forecast

While your GPSMAP 67 navigator is connected to your phone or to a Wi‑Fi network and has an active internet
connection, it can receive detailed weather information from the internet.

1 Press MENU twice to open the main menu.
2 Select Active Weather.

The navigator automatically downloads a weather forecast for your current location.

3 Select a day to view an hourly forecast, if available.
4 Select a time interval to view detailed weather information.

Viewing an Active Weather Map

To view an active weather map, your navigator must be connected to your phone.
While your navigator is connected to a phone or Wi‑Fi network with internet access, you can view a live weather

map showing weather radar, cloud cover, temperature, or wind conditions.

1 Press MENU twice to open the main menu.
2 Select Active Weather.
3 Press

NOTE: Some options may not be available in all areas.

• To view a weather radar, select .

• To view cloud coverage, select .

• To view temperatures, select .

• To view wind speeds and directions, select .

The selected data appears on the map.The navigator may take a few moments to load the weather map
data.

4 Select an option:

• To zoom in or out on the map, press or .

• To pan up, down, left, or right on the map, press to enter panning mode, and use the directional pad.

or to select a weather map tab.

Adding an Active Weather Location

You can add a weather location to view active weather for waypoints, GPScoordinates, or other locations.

1 View an active weather forecast.
2 Press MENU.
3 Select Manage Locations > New Location.
4 Select a location.
5 Select Use.

The navigator downloads a forecast for the selected location.

26 Main Menu Tools

Switching the Active Weather Location

You can quickly switch between forecasts for active weather locations you have previously added.

1 View an active weather forecast.
2 Press MENU.
3 Select Manage Locations.
4 Select a location from the list.

TIP: The option always downloads a forecast for your current location.

5 Select Use.

The navigator downloads the most recent forecast for the selected location.

Deleting an Active Weather Location

1 View an active weather forecast.
2 Press MENU.
3 Select Manage Locations.
4 Select a location from the list.

NOTE: You cannot delete the forecast.

5 Select Delete.

Garmin Adventures

You can group related items together as an adventure. For example, you can create an adventure for your
latest hiking trip. The adventure could contain the track log of the trip, photos of the trip, and geocaches you
hunted. You can use BaseCamp to create and manage your adventures. For more information, go to garmin

.com/basecamp.

Sending Files to and from BaseCamp

1 Open BaseCamp.
2 Connect the device to your computer.
3 Select an option:

• Select an item from a connected device and drag it to My Collection or to a list.

• Select an item from My Collection or a list and drag it to a connected device.

Creating an Adventure

Before you can create an adventure and send it to your device, you must download BaseCamp to your computer
and transfer a track from your device to your computer (

1 Open BaseCamp.
2 Select File > New > Garmin Adventure.
3 Select a track, and select Next.
4 If necessary, add items from BaseCamp.
5 Complete the required fields to name and describe the adventure.
6 If you want to change the cover photo for the adventure, select Change, and select a different photo.
7 Select Finish.

Sending Files to and from BaseCamp, page27).

Main Menu Tools 27

Starting an Adventure

Before you can start an adventure, you must send an adventure from BaseCamp to your navigator (

to and from BaseCamp, page27).

When you start a saved adventure, the navigator follows the saved track and displays shortcuts to related
information along the track, such as photos and waypoints.

1 Press MENU twice to open the main menu.
2 Select Adventures.

NOTE: You may need to add this application to the main menu before you can select it (Customizing the Main

Menu, page40).

3 Select an adventure.
4 Select Start.

Sending Files

Calculating the Size of an Area

1 Press MENU twice to open the main menu.
2 Select Area Calculation > Start.

NOTE: You may need to add this application to the main menu before you can select it (Customizing the Main

Menu, page40).

3 Walk around the perimeter of the area you want to calculate.
4 Select Calculate when finished.

Using the Flashlight

WARNING

This device may have a flashlight that can be programmed to flash at various intervals. Consult your physician if
you have epilepsy or are sensitive to bright or flashing lights.

NOTE: Using the flashlight can reduce battery life. You can reduce the brightness or flash frequency to extend
the life of the battery.

1 Press MENU twice to open the main menu.
2 Select Flashlight > ENTER.

NOTE: You may need to add this application to the main menu before you can select it (Customizing the Main

Menu, page40).

3 If necessary, use the brightness slider to adjust the brightness.
4 If necessary, select a different flash type.

0 No strobe, constant beam.

1 through 9 Number of strobes per second.

SOS

Emergency strobe.
NOTE: Wi‑Fi, Bluetooth, and ANT+® connections are disabled in SOS mode.

Geocaches

Geocaching is a treasure hunting activity in which players hide or search for hidden caches using clues and GPS
coordinates.

28 Main Menu Tools

Registering Your Device at Geocaching.com

You can register your device at
information for millions of geocaches.

1 Connect to a wireless network (Connecting to a Wireless Network, page23) or to the Garmin Connect app

(Pairing a Smartphone with Your Device, page23).

2 Press MENU twice to open the main menu.
3 Select Setup > Geocaching > Register Device.

An activation code appears.

4 Follow the on-screen instructions.

Connecting to Geocaching.com

After you register, you can view geocaches from
wirelessly.

• Connect to the Garmin Connect app.

• Connect to a Wi‑Fi network.

www.geocaching.com to search for a list of nearby geocaches, or to search live

www.geocaching.com on your device while connected

Downloading Geocaches Using a Computer

You can load geocaches manually onto your device using a computer (

page46). You can place the geocache files into a GPX file and import them into the GPX folder on the device.

With a premium membership to geocaching.com, you can use the "pocket query" feature to load a large group
of geocaches onto your device as a single GPX file.

1 Connect the device to your computer using a USB cable.
2 Go to www.geocaching.com.
3 If necessary, create an account.
4 Sign in.
5 Follow the instructions at geocaching.com to find and download geocaches to your device.

Transferring Files to Your Device,

Searching for a Geocache

You can search the geocaches loaded on your navigator.
If you are connected to
NOTE: You can download detailed information for a limited number of geocaches per day. You can purchase a

premium subscription to download more. Go to www.geocaching.com for more information.

1 Press MENU twice to open the main menu.
2 Select Geocaching > .
3 Press MENU.
4 Select an option:

• To search the geocaches loaded on your navigator by name, select Spell Search, and enter a search term.

• To search for geocaches near you or near another location, select Search Near, and select a location.
If you are connected to www.geocaching.com, the search results include live geocache data obtained by

GC Live Download.

• To search for live geocaches by code, select GC Live Download > GC Code, and enter the geocache code.
This feature allows you to download a specific geocache from www.geocaching.com when you know the

geocache code.

5 Select a geocache.

The geocache details appear.
NOTE: If you selected a live geocache and you are connected, the navigator downloads the full geocache

details to the internal storage, if necessary.

www.geocaching.com, you can search live geocache data and download geocaches.

Main Menu Tools 29

Searching for a Geocache on the Map

1 Press MENU twice to open the main menu.
2 Select Geocaching >
3 Press MENU.
4 Select Download Geocaches to search for and download nearby geocaches on the map.

TIP: You can select Filter to filter the search results.

5 Select a geocache.

The geocache details appear. If you selected a live geocache and you are connected to www.geocaching

.com, the navigator downloads the full geocache details to the internal storage.

.

Filtering the Geocache List

You can filter your geocache list based on certain factors, such as the level of difficulty.

1 Press MENU twice to open the main menu.
2 Select Geocaching >
3 Press MENU.
4 Select Filter, and select one or more options:

• To filter by a geocache category, such as puzzle or event, select Type.

• To filter by the physical size of the geocache container, select Cache Size.

• To filter by Unattempted, Did Not Find, or Found geocaches, select Status.

• To filter by the difficulty level of finding the geocache, or the difficulty of the terrain, select a level from 1
to 5.

5 Select QUIT to view the filtered geocache list.

.

Saving a Custom Geocache Filter

You can create and save custom filters for geocaches based on specific factors.

1 Press MENU twice to open the main menu.
2 Select Setup > Geocaching > Filter Setup > Create Filter.
3 Select items to filter.
4 Select QUIT.

By default, the new filter is saved automatically as Filter followed by a number. For example, Filter 2. You can
edit the geocache filter to change the name (

Editing a Custom Geocache Filter, page30).

Editing a Custom Geocache Filter

1 Press MENU twice to open the main menu.
2 Select Setup > Geocaching > Filter Setup.
3 Select a filter.
4 Select an item to edit.

Viewing Geocache Details

1 Press MENU twice to open the main menu.
2 Select Geocaching.
3 Select a geocache.
4 Press MENU.
5 Select Review Point.

The geocache description and logs appear.

30 Main Menu Tools

Navigating to a Geocache

1 Press MENU twice to open the main menu.
2 Select Geocaching.
3 Select a geocache.
4 Select Go.

Using Hints and Clues to find a Geocache

You can use hints or clues, such as a description or coordinates, to help you find a geocache.

1 While navigating to a geocache, select MENU > Geocache.
2 Select an option:

• To view details about the geocache, select Description.

• To view a clue about a geocache location, select Hint.

• To view latitude and longitude for a geocache, select Coordinates.

• To view feedback about the geocache from previous searchers, select Logs.

• To turn on chirp™ searching, select chirp™.

Logging the Attempt

After you have attempted to find a geocache, you can log your results. You can verify some geocaches at

.geocaching.com.

1 Press MENU twice to open the main menu.
2 Select Geocaching > Log.
3 Select Found, Did Not Find, Needs Repair, or Unattempted.
4 Select an option:

• To stop logging, select Done.

• To begin navigation to the geocache nearest you, select Find Next Closest.

• To enter a comment about looking for the cache or about the cache itself, select Edit Comment, enter a
comment, and select Done.

If you are signed in to www.geocaching.com, the log uploads to your www.geocaching.com account
automatically.

www

chirp

A chirp is a small Garmin accessory that is programmed and left in a geocache. You can use your device to find
a chirp in a geocache.

Enabling chirp Searching

1 Press MENU twice to open the main menu.
2 Select Setup > Geocaching > chirp™ Setup.
3 Select chirp™ Searching > On.

Finding a Geocache with a chirp

1 With chirp searching enabled, navigate to a geocache.

When you are within approximately 10m (33ft.) of the geocache that contains a chirp, details about the
chirp appear.

2 Select Show Details.
3 If necessary, select Go to navigate to the next stage of the geocache.

Main Menu Tools 31

Removing Live Geocache Data from the Device

You can remove live geocache data to show only geocaches manually loaded on the device using a computer.

1 Press MENU twice to open the main menu.
2 Select Setup > Geocaching > Geocaching Live > Remove Live Data.

Live geocaching data is removed from the device and no longer appears in the geocache list.

Removing Your Device Registration From Geocaching.com

If you transfer ownership of your device, you can remove your device registration from the geocaching website.

1 Press MENU twice to open the main menu.
2 Select Setup > Geocaching > Geocaching Live > Unregister Device.

Marking and Starting Navigation to a Man Overboard Location

Before you can save a man overboard (MOB) location and navigate back to it, you must add the Man Overboard
application (Customizing the Main Menu, page40).

1 Press MENU twice to open the main menu.
2 Select Man Overboard > Start.

The map opens, showing the route to the MOB location. By default, the route appears as a magenta line.

3 Navigate using the map (Navigating with the Map, page5) or compass (Navigating with the Compass,

page6).

Downloading Maps

Before you can download maps to your navigator, you must connect to a wireless network (Connecting to a

Wireless Network, page23).

1 Press MENU twice to open the main menu.
2 Select Map Manager > Outdoor Maps+.

NOTE: You may need to add this application to the main menu before you can select it (Customizing the Main

Menu, page40).

3 Select an option:

• To download free satellite map data without a subscription, select Add Satellite Imagery.

• To download premium maps and activate your Outdoor Maps+ subscription for your navigator, select

Check Subscription.
NOTE: Go to garmin.com/outdoormaps for information about purchasing a subscription.

4 Press OK, and select Layer Information to view details about the map layers (optional).
5 From the map, complete one or more actions:

• To view different areas of the map, press , , , or .

• To zoom in and out of the map, press and .

6 Select Select Area > Download.

An estimated download size appears for the map. You should verify your navigator has enough available
storage space for the map.

7 Select Name to edit the name of the map download (optional).
8 Press MENU.
9 Select Configure Maps.
10 Select a toggle switch to enable or disable map layers.

32 Main Menu Tools

Enabling Maps

You can enable map products installed on your device.

1 Select Map Manager > Outdoor Maps+ > MENU > Configure Maps.
2 Select the toggle switch to enable each installed map.
3 Select the map name to change the raster brightness level (optional).

Deleting a Map

You can remove maps to increase the available device storage.

1 Select Map Manager > Outdoor Maps+.
2 Select a map.
3 Select MENU > Delete.

Selecting a Profile

When you change activities, you can change the setup of the device by changing the profile.

1 Press MENU twice to open the main menu.
2 Select Profile Change.

NOTE: You may need to add this application to the main menu before you can select it (Customizing the Main

Menu, page40).

3 Select a profile.

Setting a Proximity Alarm

Proximity alarms alert you when you are within a specified range of a particular location.

1 Press MENU twice to open the main menu.
2 Select Proximity Alarms > Create Alarm.

NOTE: You may need to add this application to the main menu before you can select it (Customizing the Main

Menu, page40).

3 Select a category.
4 Select a location.
5 Select Use.
6 Enter a radius.

When you enter an area with a proximity alarm, the device sounds a tone.

Editing or Deleting a Proximity Alarm

1 Press MENU twice to open the main menu.
2 Select Proximity Alarms.
3 Select an alarm.
4 Select an option:

• To edit the radius, select Change Radius.

• To view the alarm on a map, select View Map.

• To delete the alarm, select Delete.

Satellite Page

The satellite page shows your current location, GPS accuracy, satellite locations, and signal strength.
You can select or to view additional satellite constellations when they are enabled.

Main Menu Tools 33

GPS Satellite Settings

Press MENU twice to open the main menu. Select Satellite. Press MENU.
Use With GPS On: Allows you to turn the GPS on.
Track Up: Indicates whether satellites are shown with their rings oriented with north toward the top of the

screen, or oriented with your current track toward the top of the screen.

Single Color: Allows you to select whether the satellite page is displayed in multicolor or single color format.
Set Location On Map: Allows you to mark your current location on the map. You can use this location to create

routes or search for saved locations.

AutoLocate Position: Calculates your GPS position using the Garmin AutoLocate® feature.
Satellite Setup: Sets the satellite system options (

Satellite Settings, page36).

Sending and Receiving Data Wirelessly

Before you can share data wirelessly, you must be within 3m (10ft.) of a compatible Garmin device.
Your navigator can send and receive data wirelessly when connected with a compatible Garmin device using

ANT+ technology. You can share waypoints, geocaches, routes, tracks, and more.

1 Press MENU twice to open the main menu.
2 Select Share Wirelessly.
3 Select an option:

• Select Send, and select a type of data.

• Select Receive to receive data from another device. The other compatible device must be attempting to
send data.

4 Follow the on-screen instructions.

Using the VIRB Remote

Before you can use the VIRB remote function, you must enable the remote setting on your VIRB camera. See the
VIRB Series Owner's Manual for more information.

The VIRB remote function allows you to control your VIRB camera using your navigator.

1 Turn on your VIRB camera.
2 On your GPSMAP 67 navigator, select VIRB Remote.

NOTE: You may need to add this application to the main menu before you can select it (Customizing the Main

Menu, page40).

3 Wait while the navigator connects to your VIRB camera.
4 Select an option:

• To record video, select .

• To take a photograph, select .

34 Main Menu Tools

Using the inReach Remote

The inReach remote function allows you to control a compatible inReach satellite communicator using your
GPSMAP 67 navigator.

1 Turn on the inReach satellite communicator.
2 On your GPSMAP 67 navigator, select inReach Remote.

NOTE: You may need to add this application to the main menu before you can select it (Customizing the Main

Menu, page40).

3 If necessary, select Pair New inReach.
4 Wait while the GPSMAP 67 navigator connects to your inReach satellite communicator.
5 Select an option:

• To send a preset message, select Send Preset, and select a message from the list.

• To send a text message, select New Message, select the message contacts, and enter the message text
or select a quick text option.

• To send an SOS message, use the arrow keys to scroll through the tabs, and select SOS > Yes.
NOTE: You should only use the SOS function in a real emergency situation.

• To view the timer and distance traveled, use the arrow keys to scroll through the tabs, and select .

Customizing the Device

Customizing the Data Fields

You can customize the data fields displayed on each main page.

1 Open the page for which you will change the data fields.
2 Press MENU.
3 Select Change Data Fields.
4 Select a data field.
5 Follow the on-screen instructions.

Customizing the Device 35

Setup Menu

Press MENU twice to open the main menu. Select Setup.
System: Allows you to customize system settings (System Settings, page36).
Display: Adjusts the backlight and display settings (Display Settings, page37).
Bluetooth: Pairs your navigator to a phone, and allows you to customize the Bluetooth settings (Bluetooth

Settings, page37).

Wi-Fi: Allows you to connect to wireless networks (Wi‑Fi Settings, page37).
Map: Sets the map appearance (Map Settings, page5).
Recording: Allows you to customize activity recording settings (Recording Settings, page16).
Routing: Allows you to customize how the device calculates routes for each activity (Routing Settings,

page38).

Expedition Mode: Allows you to customize settings for turning on expedition mode (Turning On Expedition

Mode, page38).

Waypoints: Allows you to enter a custom prefix for automatically named waypoints.
Tones: Sets the device sounds, such as key tones and alerts (Setting the Device Tones, page38).
Heading: Allows you to customize the compass heading settings (Heading Settings, page9).
Altimeter: Allows you to customize the altimeter settings (Altimeter Settings, page10).
Geocaching: Allows you to customize your geocache settings (Geocaching Settings, page39).
Sensors: Pairs wireless sensors with your navigator (Pairing Your Wireless Sensors, page39).
Fitness: Allows you to customize settings for recording fitness activities (Fitness Settings, page39).
Marine: Sets the appearance of marine data on the map (Marine Settings, page40).
Menus: Allows you to customize the page sequence and main menu (Menu Settings, page40).
Position Format: Sets the geographical position format and datum options (Position Format Settings, page41).
Units: Sets the units of measure used on the device (Changing the Units of Measure, page42).
Time: Adjusts the time settings (Time Settings, page42).
Profiles: Allows you to customize and create new activity profiles (Profiles, page42).
Reset: Allows you to reset user data and settings (Resetting Data and Settings, page43).
About: Displays device information, such as the unit ID, software version, regulatory information, and license

agreement (Viewing E-label Regulatory and Compliance Information, page47).

System Settings

Press MENU twice to open the main menu. Select Setup > System.
Satellite: Sets the satellite system options (
Text Language: Sets the text language on the device.

NOTE: Changing the text language does not change the language of user-entered data or map data, such as

street names.

USB Mode: Sets the device to use MTP (media transfer protocol) or Garmin mode when connected to a

computer.

Satellite Settings

Press MENU twice to open the main menu. Select Setup > System > Satellite.
Satellite System: Sets the satellite system to GPS only, multiple satellite systems, or Demo Mode (GPS off).
Multi-Band: Enables the use of multi-band systems on the GPSMAP 67 device.

NOTE: Multi-band systems use multiple frequency bands and allow for more consistent track logs and

improved positioning when using the device in challenging environments.

36 Customizing the Device

Satellite Settings, page36).

Display Settings

Press MENU twice to open the main menu. Select Setup > Display.
Backlight Timeout: Adjusts the length of time before the backlight turns off.
Always On Display: Saves the battery power and prolongs the battery life by turning off the screen when the

backlight times out (

Appearance: Changes the appearance of the display background and selection highlight (Changing the Color

Mode, page37).

Screen Capture: Allows you to save the image on the device screen.
Review Text Size: Changes the size of the text on the screen.

Turning Off the Screen

To save battery power and prolong the battery life, you can turn off the screen automatically when the backlight
times out.

1 Press MENU twice to open the main menu.
2 Select Setup > Display > Always On Display > Off.

You can press

Changing the Color Mode

1 Press MENU twice to open the main menu.
2 Select Setup > Display > Appearance.
3 Select an option:

• To allow the device to display day or night colors automatically based on the time of day, select Mode >
Auto.

• To use a light background, select Mode > Day.

• To use a dark background, select Mode > Night.

• To customize the color scheme for daytime, select Day Color.

• To customize the color scheme for nighttime, select Night Color.

Turning Off the Screen, page37).

to turn on the screen.

Bluetooth Settings

Press MENU twice to open the main menu. Select Setup > Bluetooth.
Status: Enables Bluetooth wireless technology, and shows current connection status.
Notifications: Shows or hides phone notifications.
Forget Phone: Removes the connected phone from the list of paired phones. This option is available only after a

phone is paired.

Wi‑Fi Settings

Press MENU twice to open the main menu. Select Setup > Wi-Fi.
Wi-Fi: Enables wireless internet technology.
Add Network: Allows you to scan for and connect to a wireless internet network.

Customizing the Device 37

Routing Settings

The available routing settings vary based on whether Direct Routing is enabled or disabled.
Press MENU twice to open the main menu. Select Setup > Routing.
Direct Routing: Enables or disables direct routing. Direct routing calculates the most direct route possible to the

destination.

Activity: Sets an activity while routing. The navigator calculates routes optimized for the type of activity you are

doing.

Lock On Road: Locks the blue triangle, which represents your position on the map, onto the nearest road. This is

most useful when driving or navigating on roads.

Course Navigation: Sets the method used to calculate courses and routes. The Direct Path option is used for

point-to-point navigation without recalculation. The Roads & Trails option adjusts the course to follow map
data, recalculating as needed.

Route Transitions: Sets how the navigator routes from one point on the route to the next. This setting is

available only for some activities. The Distance option routes you to the next point on the route when you are
within a specified distance of your current point.

Advanced Setup: Allows you to customize additional routing settings (

Advanced Routing Settings

Press MENU twice to open the main menu. Select Setup > Routing > Advanced Setup.
Calculation Method: Sets the method used to calculate your route.
Off Route Recalculation: Sets recalculation preferences when navigating away from an active route.
Avoidance Setup: Sets the types of roads, terrain, and transportation methods to avoid while navigating.

Advanced Routing Settings, page38).

Turning On Expedition Mode

You can use expedition mode to prolong the battery life. In expedition mode, the screen shuts off, the device
enters low power mode, and the device collects fewer GPS track points.

1 Press MENU twice to open the main menu.
2 Select Setup > Expedition Mode.
3 Select an option:

• To enable the device to prompt you to turn on expedition mode when you turn off the device, select
Prompted.

• To automatically turn on expedition mode after two minutes of inactivity, select Auto.

• To never turn on expedition mode, select Never.

In expedition mode, the green LED flashes occasionally.

Setting the Device Tones

You can customize tones for messages, keys, turn warnings, and alarms.

1 Press MENU twice to open the main menu.
2 Select Setup > Tones.
3 Select Sounds.
4 Select an option:

• To enable both tones and vibration, select Tone & Vibration.

• To enable only tones, select Tone.

• To enable only vibration, select Vibration.

• To disable tones and vibration, select Off.

5 Select Volume to set the tone volume.
6 Select a tone for each audible type.

38 Customizing the Device

Geocaching Settings

Press MENU twice to open the main menu. Select Setup > Geocaching.
Geocaching Live: Allows you to remove live geocache data from your device and remove your device

registration from geocaching.com (

Device Registration From Geocaching.com, page32).

Geocache Style: Sets the device to display the geocache list using names or codes.
chirp™ Setup: Allows you to enable chirp searching and program a chirp accessory (chirp, page31).
Filter Setup: Allows you to create and save custom filters for geocaches (Saving a Custom Geocache Filter,

page30).

Found Geocaches: Allows you to edit the number of geocaches found. This number automatically increases

when you log a find (Logging the Attempt, page31).

Proximity Alarm: Allows you to set an alert to sound when you are within a specified range of a geocache.

Removing Live Geocache Data from the Device, page32, Removing Your

Pairing Your Wireless Sensors

Before you can pair, you must put on the heart rate monitor or install the sensor.
Your navigator can be paired with wireless sensors using ANT+ or Bluetooth technology. For example, you can

connect a heart rate monitor with your navigator. For more information about compatibility and purchasing
optional sensors, go to

1 Bring the navigator within 3m (10ft.) of the sensor.

NOTE: Stay 10m (33ft.) away from other sensors while pairing.
2 Press MENU twice to open the main menu.
3 Select Setup > Sensors.
4 Select your sensor type.
5 Select Search For New.

When the sensor is paired with your navigator, the sensor status changes from Searching to Connected.

buy.garmin.com.

Fitness Settings

Press MENU twice to open the main menu. Select Setup > Fitness.
Auto Lap: Sets the navigator to automatically mark the lap at a specific distance.

User: Sets your user profile information. The navigator uses this information to calculate accurate training data

in Garmin Connect.

HR Zones: Sets the five heart rate zones and your maximum heart rate for fitness activities.

Marking Laps by Distance

You can use the Auto Lap® feature to automatically mark the lap at a specific distance. This feature is helpful for
comparing your performance over different parts of an activity.

1 Press MENU twice to open the main menu.
2 Select Setup > Fitness > Auto Lap.
3 Enter a value, and select Done.

Customizing the Device 39

Marine Settings

Press MENU twice to open the main menu. Select Setup > Marine.
Marine Chart Mode: Sets the type of chart the device uses when displaying marine data. Nautical displays

various map features in different colors so the marine POIs are more readable and so the map reflects the
drawing scheme of paper charts. Fishing (requires marine maps) displays a detailed view of bottom contours
and depth soundings and simplifies map presentation for optimal use while fishing.

Appearance: Sets the appearance of marine navigation aids on the map.
Marine Alarm Setup: Sets alarms for when you exceed a specified drift distance while anchored, when you are

off course by a specified distance, and when you enter water of a specific depth (

page40).

Marine Speed Filter: Averages the speed of your vessel over a short period of time for smoother speed values.

Setting Up Marine Alarms,

Setting Up Marine Alarms

1 Press MENU twice to open the main menu.
2 Select Setup > Marine > Marine Alarm Setup.
3 Select an alarm type.
4 Enter a distance, and select Done.

Menu Settings

Press MENU twice to open the main menu. Select Setup > Menus.
Menu Style: Changes the appearance of the main menu.
Main Menu: Allows you to move, add, and delete items in the main menu (

page40).

Page Sequence: Allows you to move, add, and delete items in the page sequence (Changing the Page Sequence,

page41).

Setup: Changes the order of items in the setup menu.
Find: Changes the order of items in the find menu.

Customizing the Main Menu,

Customizing the Main Menu

You can move, add, and delete items in the main menu.

1 Press MENU twice to open the main menu.
2 Select an option:

• To add a new item to the end of the list, select Add Page, select a category, and select an option.

• To change the placement of an item in the list, press MENU, select Change Item Order, select a menu
item, and select Move.

• To add a new item to the list before the selected item, press MENU, select Change Item Order, select a
menu item, and select Insert.

• To delete an item from the list, press MENU, select Change Item Order, select a menu item, and select
Remove.

40 Customizing the Device

Changing the Page Sequence

1 Press MENU twice to open the main menu.
2 Select Setup > Menus > Page Sequence > Edit Page Sequence.
3 Select a page.
4 Select an option:

• To move the page up or down in the list, select Move.

• To add a new page to the page sequence, select Insert, and select a category.

• To remove a page from the page sequence, select Remove.

TIP: You can press PAGE to view the page sequence.

Configuring the Page Ribbon Display

1 Press MENU twice to open the main menu.
2 Select Setup > Menus > Page Sequence > Page Ribbon Display.
3 Select an option:

• To disable the page ribbon display, select Off.

• To set the speed at which a page opens after being selected in the page ribbon display, select Slow or
Fast.

Position Format Settings

NOTE: You should not change the position format or the map datum coordinate system unless you are using a
map or chart that specifies a different position format.

Press MENU twice to open the main menu. Select Setup > Position Format.

Position Format: Sets the position format in which a location reading appears.
Map Datum: Sets the coordinate system on which the map is structured.
Map Spheroid: Shows the coordinate system the device is using. The default coordinate system is WGS 84.

Customizing the Device 41

Changing the Units of Measure

1 Press MENU twice to open the main menu.
2 Select Setup > Units.
3 Select an option:

• To change the unit of measure for speed and distance, select Speed/Distance.

• To change the unit of measure for vertical speed, select Vertical Speed.

• To change the unit of measure for elevation, select Elevation > Elevation.

• To change the unit of measure for depth, select Elevation > Depth.

• To change the unit of measure for temperature, select Temperature.

• To change the unit of measure for pressure, select Pressure.

4 Select a unit of measure.

Time Settings

Press MENU twice to open the main menu. Select Setup > Time.
Time Format: Sets the device to show time in a 12-hour or 24-hour format.
Time Zone: Sets the time zone for the device. The Automatic option sets the time zone automatically based on

your GPS position.

Daylight Saving Time: Sets the device to use daylight saving time.

Profiles

Profiles are a collection of settings that optimize your device based on how you are using it. For example, the
settings and views are different when you use the device for hunting than when geocaching.

When you are using a profile and you change settings, such as data fields or units of measurement, the changes
are saved automatically as part of the profile.

Creating a Custom Profile

If none of the preloaded profiles fit the needs of your activity or trip, you can create a custom profile with its own
unique settings and data fields.

1 Press MENU twice to open the main menu.
2 Select Setup > Profiles > Create Profile > OK.

The new profile is created with a default name and number. For example, Profile 10. The new profile
becomes the active profile.

3 Select the new profile.
4 Select an option:

• Customize the default profile name (

• Customize your settings as necessary (Setup Menu, page36).

• Customize the data fields as necessary (Customizing the Data Fields, page35).

Any changes you make to the settings and data fields are automatically saved to the active profile.

Editing a Profile Name, page42).

Editing a Profile Name

1 Press MENU twice to open the main menu.
2 Select Setup > Profiles.
3 Select a profile.
4 Select Edit Name.
5 Enter the new name.

42 Customizing the Device

Deleting a Profile

NOTE: You cannot delete a profile while it is in use.
1 Press MENU twice to open the main menu.
2 Select Setup > Profiles.
3 Select a profile.
4 Select Delete.

Resetting Data and Settings

1 Press MENU twice to open the main menu.
2 Select Setup > Reset.
3 Select an option:

• To reset data specific to a trip, such as distance and averages, select Reset Trip Data.

• To delete all saved waypoints, select Delete All Waypoints.

• To clear the data recorded since you started your current activity, select Clear Current Activity.
NOTE: The device continues to record new data for the current activity.

• To reset only the settings for your current activity profile to the factory default values, select Reset Profile
Settings.

• To reset all device settings and profiles to the factory default values, select Reset All Settings.
NOTE: Resetting all settings clears all geocaching activity from your device. It does not remove your saved

user data, such as tracks and waypoints.

• To remove all saved user data and reset all settings on the device to the factory default values, select

Delete All.
NOTE: Deleting all settings removes your personal data, history, and saved user data, including tracks and

waypoints.

Restoring Default Page Settings

1 Press PAGE or QUIT to scroll to the page for which you will restore the settings.
2 Press MENU.
3 Select Restore Defaults.

Device Information

Product Updates

On your computer, install Garmin Express™ (www.garmin.com/express). On your phone, install the Garmin
Explore app.

This provides easy access to these services for Garmin devices:

• Software updates

• Map updates

• Data uploads to Garmin Explore

• Product registration

Setting Up Garmin Express

1 Connect the device to your computer using a USBcable.
2 Go to
3 Follow the on-screen instructions.

garmin.com/express.

Device Information 43

Getting More Information

You can find more information about this product on the Garmin website.

• Go to support.garmin.com for additional manuals, articles, and software updates.

• Go to buy.garmin.com, or contact your Garmin dealer for information about optional accessories and
replacement parts.

Attaching the Carabiner Clip

1 Position the carabiner clip in the slots on the mounting spine of the device.

2 Slide the carabiner clip up until it locks in place.

Removing the Carabiner Clip

Lift up on the bottom of the carabiner clip, and slide the carabiner clip off the mounting spine.

Attaching a Lanyard

1 Insert the loop of the lanyard through the slot in the device.

2 Thread the other end of the lanyard through the loop, and pull it tight.
3 If necessary, attach the lanyard to your clothing or backpack to tether it during an activity.

44 Device Information

Device Care

NOTICE

Avoid chemical cleaners, solvents, and insect repellents that can damage plastic components and finishes.
Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause

permanent damage.
The device is water resistant to IEC Standard 60529 IPX7. It can withstand accidental immersion in 1 meter of

water for 30 minutes. Prolonged submersion can cause damage to the device. After submersion, be certain to
wipe dry and air dry the device before using or charging.

Thoroughly rinse the device with fresh water after exposure to chlorinated or salt water environments.

Cleaning the Device

1 Wipe the device using a cloth dampened with a mild detergent solution.
2 Wipe it dry.

Data Management

NOTE: The device is not compatible with Windows® 95, 98, Me, Windows NT®, and Mac® OS 10.3 and earlier.

File Types

The handheld device supports these file types:

• Files from Garmin Explore.

• GPX route, track, and waypoint files.

• GPX geocache files (

• JPEG photo files.

• GPI custom POI files from the Garmin POI Loader. Go to www.garmin.com/products/poiloader.

• FIT files for exporting to Garmin Connect.

Downloading Geocaches Using a Computer, page29).

Installing a Memory Card

You can install a microSD memory card, up to 32 GB, for additional storage or pre-loaded maps.

1 Lift the weather cap on the side of the device

2 Insert the memory card with the gold contacts facing the front of the device.

.

Device Information 45

Connecting the Device to Your Computer

NOTICE

To prevent corrosion, thoroughly dry the USB port, the weather cap, and the surrounding area before charging or
connecting to a computer.

1 Pull up the weather cap from the USB port.
2 Plug the small end of the USB cable into the USB port on the device.
3 Plug the large end of the USB cable into a computer USB port.

Your device and memory card (optional) appear as removable drives in My Computer on Windows
computers and as mounted volumes on Mac computers.

Transferring Files to Your Device

1 Connect the device to your computer.

On Windows computers, the device appears as a removable drive or a portable device, and the memory
card may appear as a second removable drive. On Mac computers, the device and memory card appear as
mounted volumes.

NOTE: Some computers with multiple network drives may not display device drives properly. See your
operating system documentation to learn how to map the drive.

2 On your computer, open the file browser.
3 Select a file.
4 Select Edit > Copy.
5 Open the portable device, drive, or volume for the device or memory card.
6 Browse to a folder.
7 Select Edit > Paste.

The file appears in the list of files in the device memory or on the memory card.

Deleting Files

NOTICE

If you do not know the purpose of a file, do not delete it. Your device memory contains important system files
that should not be deleted.

1 Open the Garmin drive or volume.
2 If necessary, open a folder or volume.
3 Select a file.
4 Press the Delete key on your keyboard.

NOTE: If you are using an Apple® computer, you must empty the Trash folder to completely remove the files.

Disconnecting the USB Cable

If your device is connected to your computer as a removable drive or volume, you must safely disconnect your
device from your computer to avoid data loss. If your device is connected to your Windows computer as a
portable device, it is not necessary to safely disconnect the device.

1 Complete an action:

• For Windows computers, select the Safely Remove Hardware icon in the system tray, and select your
device.

• For Apple computers, select the device, and select File > Eject.

2 Disconnect the cable from your computer.

46 Device Information

Specifications

Battery type Rechargeable, built-in lithium-ion battery

Battery life

Water rating IEC 60529 IPX7

Up to 180 hr. in GPS mode
Up to 840 hr. in expedition mode

4

Operating temperature range From -20° to 60°C (from -4° to 140°F)

Charging temperature range From 0° to 45°C (from 32° to 113°F)

Compass-safe distance 17.5cm (7in.)

Wireless frequency/protocol 2.4GHz @ 16.74 dBm maximum

EU SAR (body) 0.23 W/kg maximum

Viewing E-label Regulatory and Compliance Information

The label for this device is provided electronically. The e-label may provide regulatory information, such as
identification numbers provided by the FCC or regional compliance markings, as well as applicable product and
licensing information.

1 Press MENU twice to open the main menu.
2 Select Setup.
3 Select About.

4

The device withstands incidental exposure to water of up to 1m for up to 30min. For more information, go to

Device Information 47

www.garmin.com/waterrating.

Appendix

Data Fields

Some data fields require you to be navigating or require wireless accessories to display data.
24 hr. Max. Temperature: The maximum temperature recorded in the last 24hours from a compatible

temperature sensor.

24 hr. Min. Temperature: The minimum temperature recorded in the last 24hours from a compatible

temperature sensor.

Accuracy of GPS: The margin of error for your exact location. For example, your GPS location is accurate to

within +/-3.65m (12ft.).

Activity Distance: The distance traveled for the current track or activity.
Alarm Timer: The current time of the countdown timer.
Ambient Pressure: The uncalibrated ambient pressure.
Ascent - Average: The average vertical distance of ascent since the last reset.
Ascent - Maximum: The maximum rate of ascent in feet per minute or meters per minute since the last reset.
Ascent - Total: The total elevation distance ascended during the activity or since the last reset.
Automotive Turn: The direction of the next turn in the route. You must be navigating for this data to appear.
Average Cadence: Cycling. The average cadence for the current activity.
Average HR %Max.: The average percentage of maximum heart rate for the current activity.
Average Lap: The average lap time for the current activity.
Avg. HR: The average heart rate for the current activity.
Barometer: The calibrated current pressure.
Battery Level: The remaining battery power.
Bearing: The direction from your current location to a destination. You must be navigating for this data to

appear.

Cadence: Cycling. The number of revolutions of the crank arm. Your device must be connected to a cadence

accessory for this data to appear.

Calories: The amount of total calories burned.
Compass Heading: The direction you are moving based on the compass.
Course: The direction from your starting location to a destination. Course can be viewed as a planned or set

route. You must be navigating for this data to appear.

Current Lap: The stopwatch time for the current lap.
Date: The current day, month, and year.
Depth: The depth of the water. Your device must be connected to a NMEA® 0183 device capable of acquiring the

water depth.

Descent - Average: The average vertical distance of descent since the last reset.
Descent - Maximum: The maximum rate of descent in meters per minute or feet per minute since the last reset.
Descent - Total: The total elevation distance descended during the activity or since the last reset.
Distance to Dest.: The remaining distance to the final destination. You must be navigating for this data to

appear.

Distance to Next: The remaining distance to the next waypoint on the route. You must be navigating for this

data to appear.

Elapsed Activity Time: The total time recorded. For example, if you start the timer and run for 10 minutes, then

stop the timer for 5 minutes, then start the timer and run for 20 minutes, your elapsed time is 35 minutes.

Elevation: The altitude of your current location above or below sea level.
Elevation Above Ground: The altitude of your current location above ground level.
Elevation - Maximum: The highest elevation reached since the last reset.

48 Appendix

Elevation - Minimum: The lowest elevation reached since the last reset.
ETAatDestination: The estimated time of day when you will reach the final destination (adjusted to the local

time of the destination). You must be navigating for this data to appear.

ETAat Next: The estimated time of day when you will reach the next waypoint on the route (adjusted to the local

time of the waypoint). You must be navigating for this data to appear.

Glide Ratio: The ratio of horizontal distance traveled to the change in vertical distance.
Glide Ratio to Dest.: The glide ratio required to descend from your current position to the destination elevation.

You must be navigating for this data to appear.

GPS Elevation: The altitude of your current location using GPS.
GPS Heading: The direction you are moving based on GPS.
GPSSignal Strength: The strength of the GPS satellite signal.
Grade: The calculation of rise (elevation) over run (distance). For example, if you climb 3m (10ft.) for every

60m (200ft.) you travel, the grade is 5%.

Heading: The direction you are moving.
Heart Rate: Your heart rate in beats per minute (bpm). Your device must be connected to a compatible heart

rate monitor.

Heart Rate - %Max.: The percentage of maximum heart rate.
Heart Rate Zone: The performance zone of your current heart rate (1 to 5). The default zones are based on your

user profile and maximum heart rate (220 minus your age).

Lap Ascent: The vertical distance of ascent for the current lap.
Lap Cadence: Cycling. The average cadence for the current lap.
Lap Descent: The vertical distance of descent for the current lap.
Lap Distance: The distance traveled for the current lap.
Lap Heart Rate Percent: The average percentage of maximum heart rate for the current lap.
Lap HR: The average heart rate for the current lap.
Laps: The number of laps completed for the current activity.
Lap Speed: The average speed for the current lap.
Last Lap Ascent: The vertical distance of ascent for the last completed lap.
Last Lap Cadence: Cycling. The average cadence for the last completed lap.
Last Lap Descent: The vertical distance of descent for the last completed lap.
Last Lap Distance: The distance traveled for the last completed lap.
Last Lap HR: The average heart rate for the last completed lap.
Last Lap Speed: The average speed for the last completed lap.
Last Lap Time: The stopwatch time for the last completed lap.
Location (lat/lon): The current position in latitude and longitude, regardless of the selected position format

setting.

Location (selected): The current position using the selected position format setting.
Location of Dest.: The position of your final destination. You must be navigating for this data to appear.
None: This is a blank data field.
Odometer: A running tally of the distance traveled for all trips. This total does not clear when resetting the trip

data.

Off Course: The distance to the left or right by which you have strayed from the original path of travel. You must

be navigating for this data to appear.

Pointer: An arrow points in the direction of the next waypoint or turn. You must be navigating for this data to

appear.

Speed: The current rate of travel.
Speed Limit: The reported speed limit for the road. Not available in all maps and in all areas. Always rely on

posted road signs for actual speed limits.

Appendix 49

Speed - Maximum: The highest speed reached since the last reset.
Speed - Moving Avg.: The average speed while moving since the last reset.
Speed - Overall Avg.: The average speed while moving and stopped since the last reset.
Stopwatch Timer: The stopwatch time for the current activity.
Sunrise: The time of sunrise based on your GPS position.
Sunrise/Sunset: The time of the next sunrise or sunset based on your GPS position.
Sunset: The time of sunset based on your GPS position.
Temperature: The temperature of the air. Your body temperature affects the temperature sensor. Your device

must be connected to a tempe™ sensor for this data to appear.

Temperature - Water: The temperature of the water. Your device must be connected to a NMEA 0183 device

capable of acquiring the water temperature.

Time of Day: The time of day based on your current location and time settings (format, time zone, daylight

saving time).

Time to Destination: The estimated time remaining before you reach the destination. You must be navigating

for this data to appear.

Time to Next: The estimated time remaining before you reach the next waypoint in the route. You must be

navigating for this data to appear.

To Course: The direction in which you must move to get back on the route. You must be navigating for this data

to appear.

Total Lap: The stopwatch time for all the completed laps.
Trip Odometer: A running tally of the distance traveled since the last reset.
Trip Time: A running tally of the total time spent moving and not moving since the last reset.
Trip Time - Moving: A running tally of the time spent moving since the last reset.
Trip Time - Stopped: A running tally of the time spent not moving since the last reset.
Turn: The angle of difference (in degrees) between the bearing to your destination and your current course. L

means turn left. R means turn right. You must be navigating for this data to appear.

Velocity Made Good: The speed at which you are closing on a destination along a route. You must be navigating

for this data to appear.

Vertical Dist. to Dest.: The elevation distance between your current position and the final destination. You must

be navigating for this data to appear.

Vertical Dist. to Next: The elevation distance between your current position and the next waypoint in the route.

You must be navigating for this data to appear.

Vertical Speed: The rate of ascent or descent over time.
Vertical Speed to Dest.: The rate of ascent or descent to a predetermined altitude. You must be navigating for

this data to appear.

Waypoint at Dest.: The last point on the route to the destination. You must be navigating for this data to appear.
Waypoint at Next: The next point on the route. You must be navigating for this data to appear.

Optional Accessories

Optional accessories, such as mounts, maps, fitness accessories, and replacement parts, are available at http:/

/buy.garmin.com or from your Garmin dealer.

tempe

Your device is compatible with the tempe temperature sensor. You can attach the sensor to a secure strap or
loop where it is exposed to ambient air, so it provides a consistent source of accurate temperature data. You
must pair the tempe sensor with your device to display temperature data. See the instructions for your tempe
sensor for more information.

50 Appendix

Tips for Pairing Wireless Sensors

• Verify that the sensor is compatible with your Garmin device.

• Before you pair the sensor with your Garmin device, move 10 m (33 ft.) away from other sensors with ANT+
technology.

• Bring the Garmin device within range 3 m (10 ft.) of the sensor.

• After you pair the first time, your Garmin device automatically recognizes the sensor each time it is activated.
This process occurs automatically when you turn on the Garmin device and only takes a few seconds when
the sensors are activated and functioning correctly.

• When paired, your Garmin device receives data from only your sensor, and you can go near other sensors.

Troubleshooting

Maximizing Battery Life

You can do several things to extend the life of the batteries.

• Reduce the backlight brightness (

• Reduce the backlight timeout (Display Settings, page37).

• Reduce the flashlight brightness or flash frequency (Using the Flashlight, page28).

• Turn off the screen automatically when the backlight times out (Turning Off the Screen, page37).

• Use expedition mode (Turning On Expedition Mode, page38).

• Turn off wireless connectivity (Wi‑Fi Settings, page37).

• Turn off Bluetooth technology (Bluetooth Settings, page37).

• Turn off additional satellite systems (GPS and Other Satellite Systems, page4).

Adjusting the Backlight, page4).

Long-Term Storage

When you do not plan to use the device for several months, you should charge the battery to at least 50% before
you store the device. You should store the device in a cool, dry place with temperatures around the typical
household level. After storage, you should fully recharge the device before using it.

Restarting the Device

If the device stops responding, you may need to restart it. This does not erase any of your data or settings.

Hold the power button for approximately 30 seconds.

About Heart Rate Zones

Many athletes use heart rate zones to measure and increase their cardiovascular strength and improve their
level of fitness. A heart rate zone is a set range of heartbeats per minute. The five commonly accepted
heart rate zones are numbered from 1 to 5 according to increasing intensity. Generally, heart rate zones are
calculated based on percentages of your maximum heart rate.

Fitness Goals

Knowing your heart rate zones can help you measure and improve your fitness by understanding and applying
these principles.

• Your heart rate is a good measure of exercise intensity.

• Training in certain heart rate zones can help you improve cardiovascular capacity and strength.

If you know your maximum heart rate, you can use the table (
determine the best heart rate zone for your fitness objectives.

If you do not know your maximum heart rate, use one of the calculators available on the Internet. Some gyms
and health centers can provide a test that measures maximum heart rate. The default maximum heart rate is
220 minus your age.

Heart Rate Zone Calculations, page52) to

Appendix 51

Heart Rate Zone Calculations

% of Maximum Heart

Zone

Rate

Perceived Exertion Benefits

1 50–60% Relaxed, easy pace, rhythmic breathing

2 60–70%

3 70–80%

4 80–90%

5 90–100%

Comfortable pace, slightly deeper
breathing, conversation possible

Moderate pace, more difficult to hold
conversation

Fast pace and a bit uncomfortable,
breathing forceful

Sprinting pace, unsustainable for long
period of time, labored breathing

Beginning-level aerobic training,
reduces stress

Basic cardiovascular training, good
recovery pace

Improved aerobic capacity, optimal
cardiovascular training

Improved anaerobic capacity and
threshold, improved speed

Anaerobic and muscular endurance,
increased power

52 Appendix

support.garmin.com

GUID-5724F4C0-7557-4C51-BF07-54A567FA4600 v1March 2023