Furuno FAR-2127, FAR-2117 User Manual 2

Page 1
MARINE RADAR
WITH ARPA AND AIS DISPLAY
Models FAR-2117/2127/2137S
20” High resolution Multi-color LCD
Catalogue No. R-184c
TRADE MARK REGISTERED MARCA REGISTRADA
The future today with FURUNO's electronics technology.
FURUNO ELECTRIC CO., LTD.
9-52 Ashihara-cho, Nishinomiya City, Japan Phone: +81 (0)798 65-2111 Fax: +81 (0)798 65-4200, 66-4622 URL: www.furuno.co.jp
FURUNO DEEPSEA WORLD
Advanced signal processing for
improved detection in rough sea
LCD display providing crisp radar
images
Designed to comply with SOLAS
carriage requirements for ships below 10,000 GT
Up to four radars can be
interswitched in the network without an extra device
Automatic plotting/tracking of 100
targets manually or automatically acquired
Easy operation by customizable
function keys, trackball/wheel palm module and rotary controls
Low spurious magnetrons meeting
ITU-R unwanted emission standards
Displays 1000 AIS-equipped targets
Page 2
The control head has logically arranged controls in a combination of push keys and trackball. Well organized menu ensures that all operations can be done by trackball.
Improved target detection capabilit give the best and reliable performan
Full-keyboard Control Unit
Cursor Control
Palm Control Unit
EBL control
VRM control
User Customizable Function Keys
Menu Item Selector (wheel and enter keys)
Alternative to the Full-keyboard Control Unit or additional as a remote operation.
Page 3
The revolutionary FAR-21x7 series of X- and S-band radars are the result of FURUNO’s 50 years of experience in marine electronics and advanced computer technology. This series is designed to meet the exacting standards of the International Maritime Organization (IMO) below 10,000 GT.
The display unit employs a 20” LCD which provides an effective picture diameter of larger than 250 mm. The SXGA monitor provides crisp radar images, which are presented in a selectable color with a day and night background color for easy observation in all lighting conditions. Different colors are assigned for marks, symbols and texts for user-friendly operations.
Target detection is enhanced by sophisticated signal processing techniques. Two guard zones can be set at required ranges in any sector. Other ship’s movements are assessed by advanced target tracking software and alerted by CPA/TCPA data readouts. The FAR-21x7 series can display AIS-equipped ships, when connected with an AIS transponder.
The radar antenna is available with 4, 6.5, or 8 feet radiator.For the X-band, the rotation speed is selectable from 24 rpm for standard radars or 42 rpm for HSC. The S-band radar is also available with the antenna radiator of 10 or 12 feet. The S-band radar assures target detection in adverse weather where an X-band is heavily affected by sea or rain clutter.
Radar System 1
Radar System 2
100 Base-TX Ethernet Network System
100 Base-TX
Other Radar Images Chart Information COG, SOG, STW, etc.
Interswitch
The radars can be connected to an Ethernet network for a variety of user requirements. SOLAS Chapter V as amended requires X- and S-band radars for ships 3000 GT and over. Each of X- and S-band radars can be interswitched without using an extra option. Up to four radars can be interchanged in the network. In addition, the essential navigational information including the electronic chart, L/L, COG, SOG, STW, etc. can be shared in the network.
Display
Unit
Display
Unit
Antenna Unit Antenna Unit
Antenna Unit
Display
Unit
Antenna Unit
Display
Unit
Antenna Unit Antenna Unit
Display
Unit
Display
Unit
Independent
Interswitch
Repeater
Page 4
OS data cell
AIS-equipped target selected for data reading.
Targets automatically acquired
DATA Cell 1
Magnify
AIS Information
Water temp, Depth, Wind
An AIS-equipped ship may be displayed by both AIS and ARPA symbols. This is because the AIS position is measured by a GPS in L/L while the ARPA target blip and data are measured by range and bearing from own ship and located on the radar PPI. When the symbols are within an operator-set criteria, the ARPA symbol is merged in the AIS symbol. The criteria are determined by the differences in range, bearing, course, speed, etc.
Static Data
MMSI (Maritime Mobile Service Identity) IMO number (Where available) Call sign & name Length and beam Type of ship Location of position-fixing antenna on the ship
Voyage related data
Ship’s draught Hazardous cargo (type) Destination and ETA (at masters discretion)
Dynamic data
Ship’s position with accuracy indication and integrity status UTC Course over ground (COG) Speed over ground (SOG) Heading Navigation status (manual input) Rate of turn (where available) Update rates Dependent on speed and course alternation (2 s – 3 min)
Short safety-related messages
Free messages
A variety of navigational information, own ship status, radar plotting data, wind, water temperature and information from other shipborne sensors are displayed on the cells. These selected targets are marked with a square symbol on the radar display. Magnify is a special feature of the FURUNO radars FAR-21x7 series. This looks like a delayed-sweep zoom that the IMO strictly prohibits, but where the Administration accepts, the Magnify feature enlarges part of radar display for some special maritime activity.
AIS information
DATA DISPLAY
TARGET ASSOCIATION (Fusion)
DATA Cell 2
DATA Cell 3
Tracking data
Tracking data
MARKS AND SYMBOLS FOR ARPA AND AIS
Page 5
Automatic Acquisition Zone
Two automatic acquisition zones may be set in a sector or any form. They also act as suppression zones, avoiding unnecessary overloading to the processor and clutter by disabling automatic acquisition and tracking outside them. Targets in a automatic acquisition zone appear as inverse triangle. The operator can manually acquire important targets without restriction.
CPA Alarm Zone
Target tracking symbol changes to a triangle when its predicted course (vector) violates the operator set CPA/TCPA. The operator can readily change the vector lengths to evaluate target movement trend.
Guard Zones and Anchor Watch Zone
Guard Zones generate visual and audible alarms when targets enter the operator set zones. One of Guard Zones may be used as an anchor watch to alert the operator when own ship or targets drift away from the set zone.
Guard Zones
FAR-2117 X-band, 12 kW, TR up FAR-2127 X-band, 25 kW, TR up FAR-2137S S-band, 30 kW, TR up
8 ft antenna (4 or 6.5 ft also available)
X-band antenna for F AR-2117, 2127
Performance Monitor built in
S-band antenna for FAR-2137S
Performance Monitor built in
GUARD ZONES
RADAR MAP
NIGHT VIEW
TARGET TRAILS
Up to 200 waypoints and up to 30 routes can be stored. Each route may contain up to 30 waypoints. A radar map is a combination of map lines and marks whereby the user can define and input the navigation area, route planning and monitoring data. The radar map has the capacity of 3,000 points for lines and marks. The map data can be memorized to facilitate repeated use on a routine navigation area.
The target trails feature generates monotone or gradual shading afterglow on all objects on the display. The shading afterglow paints the display just like on an analog PPI. The monotone trails are useful to show own ship movement and other ship tracks in a specific fishing operation. The trail time is adjustable for 15, 30 s, 1, 3, 6, 15, 30 min or continuous. The target trails are indicated in a different color from background. The unique feature in this radar is a choice of True or Relative mode in Relative Motion (only True in TM).
Map Lines
Map Marks
Page 6
Specifications of
FAR-2117/2127/2137S
Antenna Radiators
1. Type Slotted waveguide array
2. Beamwidth and sidelobe attenuation
3. Rotation
RF Transceiver
1. Frequency
X-band: 9410 MHz ± 30 MHz S-band: 3050 MHz ± 30 MHz
2. Output power
3. Pulselength/PRR
Range scale (nm)
Pulselength (µs) PRR (Hz)
0.125, 0.25 0.07 3000
0.5 0.07, 0.15 3000
0.75, 1.5 0.07, 0.15, 0.3 3000, 1500 3 0.15, 0.3, 0.5, 0.7 3000, 1500, 1000 6 0.3, 0.5, 0.7, 1.2 1500, 1000, 600 12, 24 0.5, 0.7, 1.2 1000, 600 48, 96 1.2 600
4. I.F. 60 MHz, Logarithmic
5. Bandwidth Short pulse: 40 MHz
Middle pulse: 10 MHz
Long pulse: 3 MHz
Radar Display
1. Display
20.1" color LCD (SXGA 1280 x 1024 pixels), 400 (H) x 320 (V) mm, Effective display diameter: 308 mm Echo Color: Yellow, green or white in 32 levels
2. Range scales and ring intervals (nm)
Range: .125, .25, .5, .75, 1.5, 3, 6, 12, 24, 48, 96 Ring: .025, .05, .1, .25, .25, .5, 1, 2, 4, 8, 16
3. Minimum range
30* m on 0.75 nm range scale *Using a 10 m
2
test target at 3.5 m high above sea and antenna at 15 m high (IEC 60936-1). Different conditions give a different result, maybe close to 20 m in actual installations.
4. Range discrimination
30 m on 0.75* nm range scale
5. Range ring accuracy
+
0.2 %
6. Presentation modes
Head-Up, Course-Up, North-Up, North-Up TM
7. Heading information
Furuno GPS compass is a recommendable heading sensor as a backup of a gyrocompass. Confirm with your Administrations.
8. Parallel index lines
1, 2, 3 or 6 lines (menu selectable)
9. Radar map
20,000 points to create coastlines, own ship safety contour, isolated underwater dangers, buoys, traffic routing systems, prohibited areas, fairways as required by IMO.
Automatic Plotting
1. Acquisition
100 targets (e.g. manually 50, automatically 50)
2. Tracking
Automatic tracking of all acquired targets in 0.1 to 32 nm
3. Guard zone
Two zones, one of them 0.5 nm depth
4. Vector
True or relative 30 s, 1, 3, 6, 12, 15, 30 min for prediction of target motion
5. Past positions
5 or 10 past positions at intervals of 30 s,1, 2, 3, 6 min.
6. Collision warning
CPA limit: 0.2 - 10 nm, TCPA limit: 0 - 99 min.
7. Trial maneuver
Dynamic or static, with selected delay time.
AIS Display (Data input from AIS is required)
1. Symbols
Sleeping, Activated, Dangerous, Selected, Lost targets
2. Number of targets
1,000 targets max.
3. Data indication
Basic and expanded data
Power Supply (specify when ordering)
1. Processor Unit
24 VDC or 115/230 VAC, 1ø, 50/60 Hz,
7.6 A (FAR-2117: 24 rpm at 24 VDC),
8.8 A (FAR-2127: 24 rpm at 24 VDC) 440 VAC, 1ø, 50/60 Hz with optional transformer RU-1803
2. Display Unit
24 VDC or 115/230 VAC, 1ø, 50/60 Hz, 2.3 A (24 VDC) 440 VAC, 1ø, 50/60 Hz with optional transformer RU-1803
3. Antenna Unit
FAR-2137S: 230 VAC, 3ø, 60 Hz; 380 VAC, 3ø, 50 Hz; 440 VAC, 3ø, 60 Hz 115 VAC, 3ø, 60 Hz with optional transformer RU-5693 230 VAC, 3ø, 50 Hz with optional transformer RU-6522 440 VAC, 3ø, 50 Hz with optional transformer RU-5466-1
X-Band
S-Band Radiator Type Length Beamwidth(H) Beamwidth(W) Sidelobe
(within ± 10°)
Sidelobe (outside ± 10°)
XN-12AF
4 ft
1.9° 20°
-24 dB
-30 dB
XN-20AF
6.5 ft
1.23° 20°
-28 dB
-32 dB
XN-24AF
8 ft
0.95° 20°
-28 dB
-32 dB
SN-30AF
10 ft
2.3° 25°
-24 dB
-30 dB
S-band 10 ft radiator usable for an HSC
SN-36AF
12 ft
1.8° 25°
-24 dB
-30 dB
IEC 60936-1 shipborne radar
IEC 60936-2 HSC radar
IEC 60872-1 ARPA
IEC 60872-2 ATA
IEC 601993-2 AIS
IEC 61162-1 ed 2
IEC 60945 General requirements
IMO MSC.64(67) Annex 4
IMO A.823(19)
IMO MSC.74(69) Annex 3
This series of radar comply with the following IMO and IEC standards:
X-Band S-Band
Rotation Gear Box
24 rpm RSB-096
42 rpm RSB-097
21/26 rpm RSB-098 RSB-099
45 rpm RSB-100 RSB-101 RSB-102
Output Power Transceiver
FAR-2117
12 kW
RTR-078
FAR-2127
25 kW
RTR-079
FAR-2137S
30 kW
RTR-080
Page 7
EQUIPMENT LIST
Standard
1. Display Unit MU-201CR
2. Processor Unit RPU-013
3. Full-keyboard Control Unit RCU-014 Trackball Control Unit (Palm Control Unit) RCU-015 (Specify when ordering)
4. Antenna Unit with cable, 15/20/30/50/100 m (Specify when ordering)
5. Power Supply unit PSU-007 for FAR-2137S
6. Standard Spare Parts and Installation Materials
Option
1. Performance Monitor PM-31 for FAR-2117/27 PM-51 for FAR-2137S (Specify when ordering)
2. Remote Control Unit RCU-016
3. Gyro Interface GC-10 (built in Processor Unit)
4. DVI-Analog RGB Conversion Kit (Buffer board built in) OP-03-180
5. RGB Connector DSUB-BNC-1 (for VDR)
6. Card Interface Unit CU-100
7. Transformer RU-1803/5466-1/5693/6522
8. Rectifier RU-3424/1746B
9. Junction Box RJB-001
10. Antenna Cable RW-9600
11. External Alert Buzzer OP03-21
12. Hand Grip FP03-09840
13. Bracket FP03-09820
14. Hub HUB-100
INTERCONNECTION DIAGRAM
Antenna Unit (Specify when ordering)
For FAR-2137S
Display Unit
MU-201CR
Power Supply Unit
PSU-007
115 VAC, 3 , 60 Hz* 230 VAC, 3 , 50 Hz* 230 VAC, 3 , 60 Hz 380 VAC, 3 , 50 Hz 440 VAC, 3 , 50 Hz* 440 VAC, 3 , 60 Hz
Remote Control Unit
RCU-016
24 VDC
115 VAC, 1 , 50/60 Hz 230 VAC, 1 , 50/60 Hz 440 VAC, 1 , 50/60 Hz*
Full-keyboard
10/20/30 m
10/20/30 m
Trackball Control Unit
250V-DPYCY-1.5
Control Unit
RCU-014
RCU-015
Performance Monitor
PM-51
RW-9600 15/20/30/50/100 m
5 m
03S-9610 10/20/30 m
115 VAC, 1 , 50/60 Hz 230 VAC, 1 , 50/60 Hz 440 VAC, 1 , 50/60 Hz*
For FAR-2117/2127
Performance Monitor
RW-9600, 15 m
Junction Box RJB-001
DPYCY x 3 (DPYCY-6 x 2 + TPYCY-2.5) + TTYCY-4 + RG-12/U, 70 - 270 m
Junction Box RJB-001
RW-9600, 15 m
Processor
Unit
RPU-013
DVI-Analog RGB
Convirsion Kit
Gyro Interface
GC-10
24 VDC
PM-31
IEC 61162-1 250V-TTYC-1
IEC 61162-1 250V-TTYC-4
RW-4846
RGB Connector
D-Sub-BNC-1
IEC 61162-1 250V-MPYC-7
Gyro Converter
AD-100
250V-TTYC-1
Ethernet
100Base-TX
(Position, SOG, COG)
GP-90
SDME (STW for ARPA)
AIS FA-100
ECDIS
INS
VDR
DVI out Gyro Compass GPS Compass
External Alarm
HUB
FAR-28x7
Card Interface Unit
CU-100
Option or Shipyard Supply Power
Specify power supply when ordering *Optional transformer required
Page 8
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 04055Y Printed in Japan
FURUNO U.S.A., INC.
Camas, Washington, U.S.A. Phone: +1 360-834-9300 Telefax: +1 360-834-9400
FURUNO (UK) LIMITED
Denmead, Hampshire, U.K. Phone: +44 2392-230303 Telefax: +44 2392-230101
FURUNO FRANCE S.A.
Bordeaux-Mérignac, France Phone: +33 5 56 13 48 00 Telefax: +33 5 56 13 48 01
FURUNO ESPANA S.A.
Madrid, Spain Phone: +34 91-725-90-88 Telefax: +34 91-725-98-97
FURUNO DANMARK AS
Hvidovre, Denmark Phone: +45 36 77 45 00 Telefax: +45 36 77 45 01
FURUNO NORGE A/S
Ålesund, Norway Phone: +47 70 102950 Telefax: +47 70 127021
FURUNO SVERIGE AB
Västra Frölunda, Sweden Phone: +46 31-7098940 Telefax: +46 31-497093
FURUNO FINLAND OY
Espoo, Finland Phone: +358 9 4355 670 Telefax: +358 9 4355 6710
Antenna Unit for FAR-2117/2127
Display Unit MU-201CR
Full-keyboard Control Unit RCU-014
Trackball Control Unit RCU-015
10 kg 22 lb
2.4 kg 5.3 lb
XN12AF: 33 kg 73 lb
3.7 kg 8.2 lb
Processor Unit RPU-013
XN-20AF: 39 kg 86 lb XN-24AF: 42 kg 93 lb
Antenna Unit for FAR-2137S
SN-30AF: 127 kg 280 lb SN-36AF: 133 kg 293.2 lb
18.3 kg 40.4 lb
Panel mount
Bracket mount
11.0 kg 33.5 lb
Remote Control Unit RCU-016
2.4 kg 5.3 lb
1260 49.6"
XN-20AF: 2040 80.3" XN-24AF: 2550 100.4"
124 4.9"
555 21.9"
18
0.7" 468 18.4"
SN-36AF: 3765 148.2" SN-30AF: 3090 121.7"
421 16.6"
184 7.2"
530 20.9"
105
105
110
100
4.1"
4.1"
4.3"
3.9"
137
5.4"
432 17.0"
286 11.3"250 9.8"
300 11.8"
110
4.3"
8- 15
432 17.0"
350 13.8"
4- 15
378 14.9"
275 10.8"
432 17.0"
561 22.1"
570 22.4"
710 28.0"
420 16.5"
137 5.4"
18
0.7" 468 18.4"
385 15.2" 370 14.6"
410 16.1"
350 13.8"
98
90
498 19.6"
418 16.5"
183 7.2"
360 14.2" 411 16.2"
300 11.8"
2- 7
25
1.0"
340 13.4"
380 15.0"
7
0.3"
27
1.1"
95
3.7"
4- 15
534 21.0"
506 19.9" 534 21.0"
526 20.7"
Hand Grip (option)
296 11.7"
454 17.9"
79
3.1"
4- 8
30
1.9"803.2"
110 4.3"
35
454 17.9"
Bracket (option)
409 16.0"
287 11.3"
352 13.9"
506 19.9"
296 11.7"
420 16.5"
490 19.3"
136 5.4"
180 7.1"
308 12.1" 398 15.7"
110 4.3"
160 6.3"
4- 4
136 5.4"
180 7.1"
35 1.4"
50 2.0"
89 3.5"
4- 4
39 1.5"
54 2.1"
92 3.6"
110 4.3"
160 6.3"
4- 4
136 5.4"
180 7.1"
35 1.4"
50 2.0"
89 3.5"
Loading...