Thank you for your purchase of this product. Be sure that
you have read this manual and understood its contents before using the camera. Keep the manual where it will be
read by all who use the product.
For the Latest Information
The latest versions of the manuals are available from:
http://fujifilm-dsc.com/en/manual/
The site can be accessed not only from your
computer but also from smartphones and tablets.
A SCENE POSITION102 d ADVANCED FILTER
F AF/MF SETTING102
R RELEASE TYPE105
A
N ISO106
O IMAGE SIZE107
T IMAGE QUALITY108
U DYNAMIC RANGE109
P FILM SIMULATION110
X FILM SIMULATION BKT111
B SELF-TIMER111
B
o INTERVAL TIMER SHOOTING
P TIME-LAPSE MOVIE MODE 113
D WHITE BALANCE114
f COLOR114
q SHARPNESS
r HIGHLIGHT TONE
s SHADOW TONE
C
h NOISE REDUCTION
K LONG EXPOSURE NR
S AE BKT SETTING116
K TOUCH SCREEN MODE
SHOOTING MENU
102
D
E
112
114
114
115
115
115
117
M TOUCH ZOOM
l MOUNT ADAPTOR SETTING
m SHOOT WITHOUT LENS
c MF ASSIST
C PHOTOMETRY119
v INTERLOCK SPOT AE &
p FLASH SET-UP
W MOVIE SET-UP121
L IS MODE124
W DIGITAL IMAGE STABILIZER 124
r WIRELESS COMMUNICATION 125
x SHUTTER TYPE
T ELECTRONIC ZOOM SETTING 126
FOCUS AREA
P
117
117
119
119
120
120
125
iv
Page 5
Playback Menus
K
L
M
G
H
I
Adjust playback settings.
See page 133 for details.
N
PLAYBACK MENU
U IMAGE TRANSFER ORDER133 r WIRELESS COMMUNICATION 134 j RAW CONVERSION134
K
A ERASE136
G CROP138
O RESIZE138
D PROTECT139
Setup Menus
Adjust basic camera settings.
See page 145 for details.
N
SET-UP
F DATE/TIME146
N TIME DIFFERENCE146
Q a
G
R RESET147
o SOUND & FLASH147
b SOUND SET-UP148
A SCREEN SET-UP149
P
PLAYBACK MENU
L
M
P
SET-UP
146
H
I
Menu List
P
C IMAGE ROTATE139
B RED EYE REMOVAL140
I SLIDE SHOW140
m PHOTOBOOK ASSIST141
s PC AUTO SAVE142
K PRINT ORDER (DPOF)143
V instax PRINTER PRINT144
J DISP ASPECT144
P
h BUTTON SETTING
I FOCUS RING
K TOUCH SCREEN SETTING
Z POWER MANAGEMENT
V SENSOR CLEANING
t SAVE DATA SET-UP
J COLOR SPACE
r CONNECTION SETTING158
K FORMAT161
153
153
154
155
155
156
157
Menu List
v
Page 6
1
Before You Begin 1
First Steps 23
Introduction
Table of Contents
P
Introduction ........................................................................................................... ii
For the Latest Information ............................................................................................ii
Menu List................................................................................................................ iv
Shooting Menus ................................................................................................................ iv
Playback Menus .................................................................................................................. v
Plug adapter (Shape of adapter varies with region of sale.)
•
Detachable Grip
•
1
Introduction
Fixing screw (×2, including one already attached to
•
detachable grip)
Screw cap (×2, including one already attached to camera)
•
Body cap
•
USB cable
•
Shoulder strap
•
Owner’s Manual (this manual)
•
If you purchased a lens kit, check that a lens is included.
N
The Detachable Grip
Remove the screw cap attached to
the supplied detachable grip (
and attach the grip as shown (B).
Attach the grip if you nd the camera hard to hold.
•
Store the screw caps and xing screws in a safe place when not in use.
•
Forcibly overtightening the xing screws could damage the product.
•
A
)
Screw capFixing screw
xiv
Page 15
About This Manual
This manual contains instructions for your FUJIFILM X-T100
digital camera. Be sure you have read and understood its
contents before proceeding.
Symbols and Conventions
The following symbols are used in this manual:
Information that should be read to prevent damage to the
O
product.
Additional information that may be helpful when using the
N
product.
Pages on which related information may be found.
P
Menus and other text in the displays are shown in bold. Illustrations
are for explanatory purposes only; drawings may be simpli ed,
while photographs are not necessarily taken with the model of
camera described in this manual.
Terminology
The optional SD, SDHC, and SDXC memory cards the camera uses
to store pictures are referred to as “memory cards”. The electronic
view nder may be referred to as the “EVF” and the LCD monitor
as the “LCD”.
To prevent accidental operation of the selector and Q button during shoot-
ing, press MENU/OK until X is displayed. The controls can be unlocked by
pressing MENU/OK until X is no longer displayed.
The Serial Number Plate
Do not remove the serial number plate,
which provides the FCC ID, KC mark, serial number, and other important information.
1
Before You Begin
Serial number plate
5
Page 22
The Command Dials
Rotate
Rotate
Press
The main and sub-command dials are used for the operations
listed below.
Main Command Dial
Exposure compensation
•
1
Before You Begin
Rotate
Sub-Command Dial
Rotate
Press
1 Use aperture ring to adjust aperture.
2 Power zoom lens attached and ON selected for T ELECTRONIC ZOOM
SETTING.
Choose a shutter speed
•
Adjust settings in the quick menu
•
View other pictures during playback
•
Program shift
•
Choose a shutter speed
•
Adjust aperture
•
Adjust power zoom when the monitor is opened horizontally to
•
approximately 180° for self-portraits (“selfi es”)
Adjust settings in the quick menu
•
Zoom in or out in full frame playback
•
Zoom in or out in multi-frame playback
•
Zoom in on selected focus point
•
In manual focus mode, press and hold to choose c MF ASSIST
•
options
Release the shutter when the monitor is opened horizontally to
•
approximately 180° for self-portraits (“selfi es”)
Zoom in on the active focus point during playback
•
1
2
6
Page 23
Fn (function) dial
Mode
Description
P
S
A
M
u
Rotate the function dial to quickly adjust
settings for the assigned function during
shooting.
Parts of the Camera
At shipment, the dial is assigned the DEFAULT role. At this setting,
the function performed by the dial varies with the position of the
mode dial.
P (PROGRAM AE)
S (SHUTTER PRIORITY AE)
A (APERTURE PRIORITY AE)
M (MANUAL)
u (PANORAMA)
The role performed by the function dial can be chosen using
N
h BUTTON SETTING> FUNCTION (Fn) SETTING (
Portrait enhancer level selection
Film simulation
Description
P
170).
1
Before You Begin
7
Page 24
The Indicator Lamp
Indicator lamp
Camera status
The indicator lamp shows camera status
as follows:
1
Before You Begin
Indicator lamp
Glows greenFocus locked.
Blinks greenFocus or slow shutter speed warning. Pictures can be taken.
Camera on: Recording pictures. Additional pictures can be
Blinks green and
orange
Glows orange
Blinks orangeFlash charging; fl ash will not fi re when picture is taken.
Blinks redLens or memory error.
Warnings may also appear in the display.
N
•
taken.
Camera o : Uploading pictures to a smartphone or tablet.
•
Recording pictures. No additional pictures can be taken at
this time.
Camera status
8
Page 25
The LCD Monitor
The LCD monitor can be reversed for
self-portraits (
of viewing, but be careful that your ngers and other objects do not get caught
between the monitor and the camera
body and avoid touching the wires behind the display. Touching the wires
could cause camera malfunction.
The LCD monitor also functions as a touch screen (P 18).
N
Focusing the View nder
If the indicators displayed in the view nder
are blurred, put your eye to the view nder
and rotate the diopter adjustment control
until the display is in sharp focus.
100) or tilted for ease
P
Parts of the Camera
1
Before You Begin
9
Page 26
Camera Displays
This section lists the indicators that may be displayed
during shooting.
For illustrative purposes, displays are shown with all indicators lit.
O
Electronic View nder/LCD Monitor
1
Before You Begin
5
4
3
2
1
0
-1
-2
-3
-4
-5
1000
Icons that are displayed in both the electronic view nder (EVF) and
N
LCD monitor have the same meaning in both displays.
Item M in the electronic view nder shows the current touch screen
mode only. Other touch controls are not displayed.
ᵏᵗᵗ
ᵎᵏᵍᵎᵏᵍᵐᵎᵏᵖᴾᵏᵎᵘᵎᵎᴾᵟᵫ
5.61.012800
ᵫᵤ
10
Page 27
Camera Displays
Date stamp ..................................................... 157
Press the VIEW MODE button to cycle
through the following display modes.
1
Before You Begin
Option
Putting your eye to the viewfi nder turns the viewfi nder on and
E EYE SENSOR
EVF ONLYViewfi nder on, LCD monitor off .
LCD ONLYLCD monitor on, viewfi nder off .
EVF ONLY + E
E EYE SENSOR +
LCD IMAGE DISP.
The Eye Sensor
The eye sensor may respond to objects other
•
than your eye or to light shining directly on
the sensor.
The eye sensor is disabled when the display in
•
the monitor is reversed (
the LCD monitor off ; taking your eye away turns the viewfi nder
off and LCD monitor on.
Putting your eye to the viewfi nder turns the viewfi nder on; taking it away turns the viewfi nder off . The LCD monitor remains off .
Putting your eye to the viewfi nder during shooting turns the viewfi nder on, but the LCD monitor is used for the display of images
once you remove your eye from the viewfi nder after shooting.
100).
P
Description
Eye sensor
12
Page 29
Camera Displays
Adjusting Display Brightness
The brightness and hue of the view nder and LCD monitor can
be adjusted using the items in the ASCREEN SET-UP menu.
Choose EVF BRIGHTNESS or EVF COLOR to adjust view nder
brightness or hue, LCD BRIGHTNESS or LCD COLOR to do the
same for the LCD monitor.
The View nder Display
When ON is selected for A SCREEN SET-UP> EVF AUTOROTATE
DISPLAYS, the indicators in the view nder automatically rotate to
match camera orientation.
The display in the LCD monitor is una ected.
O
1
Before You Begin
13
Page 30
The DISP/BACK Button
Press DISP/BACK to cycle through display
modes as follows.
Indicators for the EVF and LCD must be
N
selected separately. To choose the EVF display, place your eye to the view nder while
1
Before You Begin
using the DISP/BACK button.
Viewfi nder
StandardInformation o
LCD Monitor
StandardInformation o
5
4
3
2
1
0
-1
-2
-3
-4
-5
5.6 1.0 12800
1000
14
Info display
Page 31
Camera Displays
Item
Default
Item
Default
Customizing the Standard Display
To choose the items shown in the standard display:
Display standard indicators.
1
Use the DISP/BACK button to display standard indicators.
Select DISP. CUSTOM SETTING.
2
Select ASCREEN SET-UP> DISP. CUSTOM SETTING in the
setup menu.
Choose items.
3
Highlight items and press MENU/OK to select or deselect.
SHUTTER TYPE
FLASH
CONTINUOUS MODE
DUAL IS MODE
WHITE BALANCE
FILM SIMULATION
DYNAMIC RANGE
FRAMES REMAINING
IMAGE SIZE/QUALITY
MOVIE MODE & REC. TIME
AUTO IMAGE TRANSFER
BATTERY LEVEL
Default
R
R
R
R
R
R
R
R
R
R
R
R
1
Before You Begin
Save changes.
4
Press DISP/BACK to save changes.
Exit the menus.
5
Press DISP/BACK as needed to exit the menus and return to the
shooting display.
15
Page 32
Camera Displays
Virtual Horizon
Selecting ELECTRONIC LEVEL displays a virtual
horizon. The camera is level when the two lines
overlap. Note that the virtual horizon may not
be displayed if the camera lens is pointed up or
down.
Histograms
1
Histograms show the distribution of tones in the image. Brightness is
Before You Begin
shown by the horizontal axis, the number of pixels by the vertical axis.
Number of pixels
ShadowsHighlights
Optimal exposure: Pixels are distributed in an
•
even curve throughout the tone range.
Overexposed: Pixels are clustered on the right
•
side of the graph.
Underexposed: Pixels are clustered on the left
•
side of the graph.
Pixel brightness
16
Page 33
Using the Menus
Shooting
Playback
To display the menus, press MENU/OK.
Shooting
SHOOTING MENU
P
AF/MF SETTING
RELEASE TYPE
ISO
IMAGE SIZE
IMAGE QUALITY
DYNAMIC RANGE
EXIT
PROGRAM AE
Playback
PLAYBACK MENU
IMAGE TRANSFER ORDER
WIRELESS COMMUNICATION
RAW CONVERSION
ERASE
CROP
RESIZE
PROTECT
EXIT
To navigate the menus:
SHOOTING MENU
Press MENU/OK to display the menus.
1
Press the selector left to highlight the
2
tab for the current menu.
P
AF/MF SETTING
RELEASE TYPE
ISO
IMAGE SIZE
IMAGE QUALITY
DYNAMIC RANGE
EXIT
SHOOTING MENU
P
AF/MF SETTING
RELEASE TYPE
ISO
IMAGE SIZE
IMAGE QUALITY
DYNAMIC RANGE
EXIT
PROGRAM AE
PROGRAM AE
Ta b
Press the selector up or down to highlight the tab (A, B,
3
C, D, E, K, L, M, G, H or I) containing the
desired item.
1
Before You Begin
Press the selector right to place the cursor in the menu.
4
17
Page 34
Touch Screen Mode
The camera’s LCD monitor can be used as a touch screen.
Shooting Touch Controls
To enable touch controls, select ON for K TOUCH SCREEN
SETTING> TOUCH SCREEN ON/OFF.
1
Before You Begin
EVF
The LCD monitor can be used to select the focus area while
pictures are being framed in the electronic view nder (EVF).
Use KTOUCH SCREEN SETTING> EVF TOUCH SCREEN AREA SETTINGS to choose the area of the monitor employed for touch
controls.
LCD Monitor
Touch controls can be used for such operations as choosing the focus area and
taking photographs. The operation performed can be selected by tapping the
touch screen mode indicator in the display to cycle through the following options.
The touch screen mode indicator is not displayed and touch con-
N
trols cannot be used when OFF is selected for K TOUCH SCREEN
SETTING> TOUCH SCREEN ON/OFF in the setup menu.
Touch control settings can be adjusted using the K TOUCH SCREEN
MODE option in the shooting menu.
ᵫᵤ
18
Page 35
Still Photography
Mode
Description
TOUCH
SHOOTING
AF
AREA
OFF
Mode
Description
TOUCH
SHOOTING
AF
AREA
OFF
Mode
TOUCH
SHOOTING
Tap your subject in the display to focus and release the shutter.
In burst mode, pictures will be taken while you keep your fi nger
on the display.
Tap to select a focus point and lock focus. The shutter can be re-
AF
leased by pressing the shutter button all the way down.
Tap to select a point for focus or zoom. The focus frame will move
AREA
to the selected point.
OFFTouch focus and shooting disabled.
Movie Recording
Mode
TOUCH
SHOOTING
Tap your subject in the display to focus. In focus mode
CONTINUOUS AF (AF-C), the camera will continually adjust focus in response to changes in the distance to the subject; to refocus in focus mode SINGLE AF (AF-S) or to focus on a new subject
AF
in focus mode CONTINUOUS AF, tap the subject in the monitor.
Tap to select a focus point. If SINGLE AF (AF-S) is selected for
focus mode, the camera will focus on the subject in the selected
focus point when the shutter button is pressed halfway. In focus
AREA
mode CONTINUOUS AF (AF-C), the camera will continually adjust focus in response to changes in the distance to the subject in
the selected focus point.
Description
Description
Touch Screen Mode
1
Before You Begin
OFFTouch focus disabled.
We recommend that you select AREA for W MOVIE SET-UP > AF
N
MODE in the shooting menu before recording movies using touch
controls (in some movie modes, AREA will be selected automatically).
19
Page 36
Adjusting Settings
Mode
Description
FILM SIMULATION
SCENE POSITION
ADVANCED FILTER
PORTRAIT ENHANCER
The touch screen can be used to adjust
settings. The settings available vary with
the shooting mode.
ᵫᵤ
1
Before You Begin
Mode
FILM SIMULATION
SCENE POSITIONChoose a scene. Available in SP mode.
ADVANCED FILTER Choose an advanced fi lter. Available in Adv. mode.
PORTRAIT ENHANCER
Choose a fi lm simulation type. Available in S, P, S, A,
and M modes.
Choose the portrait enhancement level. Available in
hPORTRAIT ENHANCER (Z) mode.
Choosing a Focus Mode
The touch screen can be used to choose
the focus mode (
P
69).
Touch Function
Functions can be assigned to the following ick gestures in much the same way
as function buttons (P 168):
Flick up: T-Fn 1
•
Flick left: T-Fn 2
•
Flick right: T-Fn 3
•
Flick down: T-Fn4
•
Description
ᵫᵤ
20
Page 37
Touch Screen Mode
Touch Zoom
Touch controls can be used for digital zoom, regardless of the
mode selected for K TOUCH SCREEN MODE in the shooting
menu.
Select ON for MTOUCH ZOOM in the shooting menu.
1
Use pinch-out and pinch-in gestures (P 22) to zoom in
2
and out using digital zoom.
Regardless of where you place your ngers, the camera will zoom
N
in on and out from the center of the frame.
The camera will focus on the area selected for F AF/MF
SETTING> FOCUS AREA. If AREA is selected for K TOUCH
SCREEN MODE, you can select the focus area by tapping the
display.
Take pictures.
3
1
Before You Begin
21
Page 38
Touch Screen Mode
Playback Touch Controls
When ON is selected for K TOUCH SCREEN SETTING> TOUCH
SCREEN ON/OFF in the setup menu, touch controls can be used
for the following playback operations:
Swipe: Swipe a nger across the display
•
to view other images.
1
Before You Begin
Pinch-out: Place two ngers on the dis-
•
play and spread them apart to zoom in.
Pinch-in: Place two ngers on the display
•
and slide them together to zoom out.
Pictures can be zoomed out until the en-
N
tire image is visible but no further.
Double-tap: Tap the display twice to zoom
•
in on the focus point.
Drag: View other areas of the image
•
during playback zoom.
22
Page 39
First Steps
23
Page 40
First Steps
Attaching the Shoulder Strap
Attach the strap to the two strap eyelets as shown below.
2
Attach the strap as shown.
O
To avoid dropping the camera, be sure the strap is correctly secured.
24
Page 41
Attaching a Lens
The camera can be used with lenses for the FUJIFILM
X-mount.
Remove the body cap from the camera
and the rear cap from the lens. Place the
lens on mount, keeping the marks on the
lens and camera aligned (
rotate the lens until it clicks into place
(B).
When attaching lenses, ensure that dust or other foreign matter does
O
not enter the camera and be careful not to touch the camera’s internal
parts. Do not press the lens release button while attaching the lens
and be sure the latch has securely clicked into place.
Removing Lenses
To remove the lens, turn the camera o , then
press the lens release button (A) and rotate the
lens as shown (
To prevent dust accumulating on the lens
O
or inside the camera, replace the lens caps
and camera body cap when the lens is not
attached.
Lenses and Other Optional Accessories
The camera can be used with lenses and accessories for the FUJIFILM
X-mount.
B
).
), and then
A
2
First Steps
Before attaching or removing (exchanging) lenses, attach the lens
O
caps and check that the lenses are free of dust and other foreign matter. Do not change lenses in direct sunlight or under another bright
light source, as light focused into the interior of the camera could
cause it to malfunction.
25
Page 42
First Steps
Inserting the Battery and a Memory Card
Insert the battery and memory card as described below.
Open the battery-chamber cover.
1
Slide the battery-chamber latch as
shown and open the battery-chamber cover.
Do not remove the battery when the
O
2
camera is on. Failure to observe this
precaution could damage image les
or memory cards.
Do not use excessive force when handling the battery-chamber cover.
Insert the battery.
2
Using the battery to keep the battery
latch pressed to one side, insert the
battery contacts rst in the direction
shown by the arrow. Con rm that
the battery is securely latched.
Insert the battery in the orientation
O
shown. Do not use force or attempt
to insert the battery upside down or
backwards. The battery will slide in
easily in the correct orientation.
26
Page 43
Inserting the Battery and a Memory Card
Insert the memory card.
3
Holding the card in the orientation
shown, slide it in until it clicks into
place at the back of the slot.
Be sure card is in the correct orienta-
O
tion; do not insert at an angle or use
force.
Format memory cards before rst use,
and be sure to reformat all memory
cards after using them in a computer
or other device.
Close the battery-chamber cover.
4
Close and latch the cover.
If the cover does not close, check that
O
the battery is in the correct orientation. Do not attempt to force the cover shut.
2
First Steps
27
Page 44
Removing the Battery and Memory Card
Before removing the battery or memory card, turn the camera o and open
the battery-chamber cover.
To remove the battery, press the battery latch to
the side, and slide the battery out of the camera
as shown.
The battery may become hot when used in high-temperature envi-
O
2
First Steps
ronments. Observe caution when removing the battery.
To remove the memory card, press it in and release it slowly. The card can then be removed
by hand. When a memory card is removed, the
card could be ejected too quickly. Use your nger to hold it and gently release the card.
Press the center of the card when ejecting it.
O
28
Page 45
Inserting the Battery and a Memory Card
Compatible Memory Cards
Fuji lm and SanDisk SD, SDHC, and SDXC memory cards have
been approved for use in the camera; UHS-I cards are supported,
while cards with a UHS speed class of 3 or better are recommended for 4K burst, multi-focus, and movie modes. A complete list of
approved memory cards is available at http://www.fujifilm.com/support/digital_cameras/compatibility/. Operation is not guaranteed with other cards. The camera cannot be used with xD-Picture Cards or MultiMediaCard (MMC) devices.
Do not turn the camera o or remove the memory card while the memory
O
card is being formatted or data are being recorded to or deleted from the
card. Failure to observe this precaution could damage the card.
Memory cards can be locked, making it impossible to format the card or to record or
delete images. Before inserting a memory
card, slide the write-protect switch to the
unlocked position.
Memory cards are small and can be swallowed; keep out of reach of
children. If a child swallows a memory card, seek medical assistance
immediately.
miniSD or microSD adapters that are larger or smaller than memory
cards may not eject normally; if the card does not eject, take the camera
to an authorized service representative. Do not forcibly remove the card.
Do not a x labels or other objects to memory cards. Peeling labels
can cause camera malfunction.
Movie recording may be interrupted with some types of memory card.
When you rst take a picture after formatting a memory card in the
camera, the camera will create a folder in which the new shot and
subsequent. Do not rename or delete this folder or use a computer
or other device to edit, delete, or rename image les. Always use the
camera to delete pictures; before editing or renaming les, copy them
to a computer and edit or rename the copies, not the originals. Renaming the les on the camera can cause problems during playback.
2
First Steps
29
Page 46
First Steps
Charging the Battery
The battery is not charged at shipment. Turn the camera o
and charge the battery before use. The camera charges the
battery internally.
An NP-W126S rechargeable battery is supplied with the camera.
O
Charging takes about 210 minutes.
Attach the plug adapter to the AC power adapter.
1
2
Attach the plug adapter as shown, making sure that it is fully inserted and clicks
into place on the AC power adapter terminals.
The supplied plug adapter is for use
O
exclusively with the AC-5VG AC power
adapter. Do not use it with other devices.
The shape of the plug adapter varies with
the country of sale.
Charge the battery.
2
Connect the camera to the supplied AC power adapter using
the supplied USB cable. Then plug the AC power adapter into
an indoor power outlet.
Connect the cable to the camera’s Micro USB (Micro-B) connector.
O
Be sure the connectors are in the correct orientation and then
insert them fully.
30
Page 47
Charging the Battery
Indicator lamp
Battery status
Charge Status
The indicator lamp shows battery charge status as follows:
Indicator lamp
OnBattery charging.
Off Charging complete.
BlinksBattery fault.
The battery will not charge while the camera is on.
O
Use the AC power adapter with the plug adapter for your country or
region.
Do not a x labels or other objects to the battery. Failure to observe
this precaution could make it impossible to remove the battery from
the camera.
Do not short the battery terminals. The battery could overheat.
Read the cautions in “The Battery and Power Supply”.
Use only battery chargers designated for use with the battery. Failure
to observe this precaution could result in product malfunction.
Do not remove the labels from the battery or attempt to split or peel
the outer casing.
The battery gradually loses its charge when not in use. Charge the
battery one or two days before use. If the battery fails to hold a charge,
it has reached the end of its charging life and must be replaced.
Unplug the AC power adapter from the power outlet when it is not
in use.
Remove dirt from the battery terminals with a clean, dry cloth. Failure
to observe this precaution could prevent the battery from charging.
Charging times may increase at very low or very high temperatures.
Battery status
2
First Steps
31
Page 48
Charging the Battery
Charging via Computer
The battery can be charged by connecting the camera to a computer. Connect the supplied USB cable as shown, making sure the connectors are fully
inserted.
2
First Steps
The battery will not charge while the camera is on.
•
Connect the cable to the camera’s Micro USB (Micro-B) connector.
•
Connect the camera directly to the computer; do not use a USB hub or
•
keyboard.
Charging stops if the computer enters sleep mode; to resume charging,
•
activate the computer and disconnect and reconnect the USB cable.
Charging may not be supported depending on the model of computer,
•
computer settings, and the computer’s current state.
32
Page 49
Turning the Camera On and O
Use the ON/OFF switch to turn the camera on and o .
Rotate the switch to ON to turn the camera on, or to OFF to turn the camera o .
Fingerprints and other marks on the lens or view nder can a ect pic-
O
tures or the view through the view nder. Keep the lens and view nder clean.
Press the a button to start playback. Press the shutter button halfway
N
to return to shooting mode.
The camera will turn o automatically if no operations are performed
for the length of time selected for Z POWER MANAGEMENT> AUTO POWER OFF. To reactivate the camera after it has turned o automatically, press the shutter button halfway or turn the ON/OFF switch
to OFF and then back to ON.
Selecting HIGH PERFORMANCE for Z POWER MANAGEMENT re-
duces startup time.
2
First Steps
33
Page 50
Checking the Battery Level
Indicator
Description
After turning the camera on, check the battery level in the
display.
Battery level is shown as follows:
2
First Steps
Indicator
O
(white)
M
(white)
K
(white)
J
(red)
A
(blinks red)
Battery partially discharged.
Battery about two-thirds charged.
Battery about one-third charged. Charge as soon as possible.
Low battery. Charge battery.
Battery exhausted. Turn camera off and recharge battery.
Description
P
34
Page 51
Basic Setup
When you turn the camera on for the rst time, you can
choose a language and set the camera clock. At default
settings, you can also pair the camera with a smartphone
or tablet so that you can later synchronize the clocks or
download pictures. Follow the steps below when turning
the camera on for the rst time.
If you intend to pair the camera with a smartphone or tablet, install
N
and launch the latest version of the FUJIFILM Camera Remote App on
the smart device before proceeding. For more information, visit:
http://app.fujifilm-dsc.com/en/camera_remote/
Turn the camera on.
1
A language-selection dialog will be
displayed.
Choose a language.
2
Highlight a language and press
MENU/OK.
2
First Steps
Pair the camera with the smartphone or tablet.
3
Press MENU/OK to pair the camera with
a smartphone or tablet running the
FUJIFILM Camera Remote app.
To skip pairing, press DISP/BACK.
N
67$570(18
PAIRING REGISTRATION
PAIR WITH SMARTPHONE?
IMAGES CAN BE EASILY TRANSFERRED
TO SMARTPHONE BY PAIRING
SCAN QR CODE OR SEARCH FOR "FUJIFILM
Camera Remote" APP ON THE WEB
HELP
SET
SKIP
35
Page 52
Check the time.
4
When pairing is complete, you will
be prompted to set the camera clock
to the time reported by the smartphone or tablet. Check that the time
PAIRING REGISTRATION
Phone000111111
PAIRING COMPLETE
1/1/2018 12:00 PM
SET DATE/TIME FROM SMARTPHONE?
is correct.
SET CANCEL
SMARTPHONE SYNC. SETTING
LOCATION&TIME
LOCATION
TIME
OFF
SET
First Steps
To set the clock manually, press
N
DISP/BACK (P 37).
Synchronize the camera settings with
5
2
the settings confi gured on your smartphone or tablet.
Set the clock.
6
Press MENU/OK to set the camera clock to the time reported by
the smartphone or tablet and exit to shooting mode.
If the battery is removed for an extended period, the camera clock will
N
be reset and the language-selection dialog will be displayed when the
camera is turned on.
Skipping the Current Step
Press DISP/BACK to skip the current step. A con rmation dialog will be displayed; select NO to avoid repeating any steps you skipped the next time
the camera is turned on.
36
Page 53
Choosing a Di erent Language
To change the language:
Display language options.
1
Display the setup menu and select Qa.
Choose a language.
2
Highlight the desired option and press MENU/OK.
Basic Setup
Changing the Time and Date
To set the camera clock:
Display DATE/TIME options.
1
Display the setup menu and select FDATE/TIME.
Set the clock.
2
Press the selector left or right to highlight the year, month,
day, hour, or minute and press up or down to change. Press
MENU/OK to set the clock.
2
First Steps
37
Page 54
MEMO
38
Page 55
Basic Photography and
Playback
39
Page 56
3
Basic Photography and Playback
Taking Photographs
This section explains basic photography.
Select S mode.
1
Rotate the mode dial to S
(ADVANCED SR AUTO). The follow-
ing information will be displayed in
the LCD monitor.
Scene label: The camera automat-
A
ically selects the appropriate
scene.
The u Icon: Shows that the cam-
B
era is focusing on the subjects’
eyes.
In S mode, the camera continuously adjusts focus and search-
O
es for eyes, increasing the drain on the battery; in addition, the
sound of the camera focusing may be audible.
Ready the camera.
2
Hold the camera steady with both
hands and brace your elbows against
your sides. Shaking or unsteady
hands can blur your shots.
PORTRAIT
To prevent pictures that are out of focus or too dark (underexposed), keep
your ngers and other objects away
from the lens, ash, and AF-assist illuminator.
40
Page 57
Frame the picture.
3
Lenses with Zoom Rings
Use the zoom ring to frame the picture in
the display. Rotate the ring left to zoom
out, right to zoom in.
Focus.
4
Press the shutter button halfway to
focus.
If the subject is poorly lit, the AF-assist
N
illuminator may light.
Taking Photographs
3
Basic Photography and Playback
Focus
indicator
If the camera is able to focus, it will beep twice and focus area and
focus indicator will glow green. Focus and exposure will lock
while the shutter button is pressed halfway.
If the camera is unable to focus, the focus frame will turn red, s
will be displayed, and the focus indicator will blink white.
Shoot.
5
Smoothly press the shutter button the rest of the way down
to take the picture.
Focus frame
41
Page 58
a Viewing Pictures
Pictures can be viewed in the LCD monitor.
To view pictures full frame, press a.
100-0001
Additional pictures can be viewed by pressing the selector left
3
or right or rotating the main command dial. Press the selector or
Basic Photography and Playback
rotate the dial right to view pictures in the order recorded, left to
view pictures in reverse order. Keep the selector pressed to scroll
rapidly to the desired frame.
Pictures taken using other cameras are marked with a m (“gift image”)
N
icon to warn that they may not display correctly and that playback
zoom may not be available.
42
Page 59
b Deleting Pictures
Use the b button to delete pictures.
Deleted pictures cannot be recovered. Copy important pictures to a
O
computer or other storage device before proceeding.
With a picture displayed full frame, press the b button and
1
select FRAME.
ERASE
FRAME
SELECTED FRAMES
ALL FRAMES
Press the selector left or right to scroll through pictures and
2
press MENU/OK to delete (a con rmation dialog is not displayed). Repeat to delete additional pictures.
Protected pictures cannot be deleted. Remove protection from any
N
pictures you wish to delete (P 139).
Pictures can also be deleted by A ERASE from playback menu
(P 136).
3
Basic Photography and Playback
43
Page 60
MEMO
44
Page 61
Movie Recording and
Playback
45
Page 62
F Recording Movies
Record movies with sound.
Press t to start recording.
1
A recording indicator (V) and the
time remaining are displayed while
recording is in progress.
4
Movie Recording and Playback
To end recording, press the t button again. Recording ends
2
automatically when the maximum length is reached or the
memory card is full.
Using an External Microphone
Sound can be recorded with external microphones that connect using jacks 2.5 mm in diameter; microphones that require plug-in power cannot be used. See the microphone manual
for details.
46
Page 63
Recording Movies
Use a memory card with a UHS speed class of 3 or better when record-
O
ing movies.
Touch zoom is not available during movie recording.
The area recorded when ON is selected for W DIGITAL IMAGE STABILIZER is smaller than that shown in the LCD monitor or electronic view nder (EVF).
Sound is recorded via the built-in microphone or an optional external
microphone. Do not cover the microphone during recording. Note
that the microphone may pick up lens noise and other sounds made
by the camera during recording.
Vertical or horizontal streaks may appear in movies containing very
bright subjects. This is normal and does not indicate a malfunction.
The indicator lamp lights while recording is in progress. During re-
N
cording, you can change exposure compensation by up to ±2EV and
adjust zoom using the zoom ring on the lens (if available).
Recording may be unavailable at some settings, while in other cases
settings may not apply during recording.
4
Movie Recording and Playback
47
Page 64
Recording Movies
Adjusting Movie Settings
Adjust movie settings in the WMOVIE SET-UP menu.
•
The movie type, frame size, and frame rate can be selected us-
•
ing WMOVIE SET-UP> MOVIE MODE.
The AF-area mode for movie recording is selected using
•
WMOVIE SET-UP> AF MODE; choose from MULTI and AREA.
Focus mode is selected using WMOVIE SET-UP> FOCUS
•
MODE; for continuous focus adjustment, select CONTINUOUS
AF or choose SINGLE AF and enable Intelligent Face Detec-
tion. Intelligent Face Detection is not available in manual focus
mode.
Depth of Field
Manual aperture adjustment is available in shooting modes A and M; adjust
4
aperture before recording begins. Choose low f-numbers to soften background details. The e ect can be heightened by increasing the distance
Movie Recording and Playback
between your subject and the background.
48
Page 65
a Viewing Movies
Selector
Full-frame playback
Playback in progress
((xx)
Playback paused
((yy)
View movies on the camera.
In full-frame playback, movies are identi ed by a W icon. Press the selector down
to start movie playback.
The following operations can be performed while a movie is displayed:
01/01/2018 10:00 AM
PLAYPLAY
Selector
e
f
gh
Playback in progress
Full-frame playback
)
—End playback
Start playbackPause playbackStart/resume playback
View other picturesAdjust speed
Playback paused
)
Single frame rewind/
advance
Progress is shown in the display during
playback.
Do not cover the speaker during playback.
O
Sound is not played back if OFF is selected
for oSOUND & FLASH.
Press MENU/OK to pause playback and display volume controls. Press
N
the selector up or down to adjust the volume; press MENU/OK again to
resume playback. Volume can also be adjusted from the setup menu
(P 148).
STOPPAUSE
4
Movie Recording and Playback
29m59s
49
Page 66
Viewing Movies
Playback Speed
Press the selector left or right during playback
to adjust playback speed. Speed is shown by
the number of arrows (M or N).
4
Movie Recording and Playback
29m59s
STOPPAUSE
Arrows
50
Page 67
Taking Photographs
51
Page 68
Choosing a Shooting Mode
Scene label
Scene label
Choose a shooting mode according to the scene or type
of subject.
S ADVANCED SR AUTO
When the mode dial is rotated to S, the
camera automatically optimizes settings
to suit the scene.
The scene is shown by a label in the display.
5
Taking Photographs
Scene label
AUTOMACRO
PORTRAITNIGHT PORTRAIT
LANDSCAPEBACKLIT PORTRAIT
NIGHT
The mode selected may vary with shooting conditions. If the mode
O
and subject do not match, select mode P or choose SP and select a
scene manually.
Subjects detected by the camera are indicated by green frames; press
N
the shutter button halfway to focus on the subject in the frame.
Scene label
PORTRAIT
Scene label
52
Page 69
Choosing a Shooting Mode
Program AE (P)
Let the camera choose shutter speed and aperture for optimal
exposure. Other values that produce the same exposure can be
selected with program shift.
Rotate the mode dial to P.
P will appear in the display.
1000
1000
5.6
12800
5.6
P
Program Shift
Rotate the sub-command dial to choose the
desired combination of shutter speed and aperture (program shift).
P
5
Taking Photographs
Program shift is not available if:
O
The attached ash supports TTL auto
•
AUTO is selected for UDYNAMIC RANGE
•
Movie recording is in progress
•
To cancel program shift, turn the camera o .
N
Shutter speedAperture
53
Page 70
Shutter-Priority AE (S)
Choose a shutter speed and let the camera adjust aperture for
optimal exposure.
Rotate the mode dial to S.
1
S will appear in the display.
5.6
2000
S
12800
5
Taking Photographs
Use the sub-command dial to choose
2
a shutter speed.
If the correct exposure cannot be achieved at the selected shutter
O
speed, aperture will be displayed in red.
54
Page 71
Choosing a Shooting Mode
Time (T)
Shutter speeds of 1 s or slower are referred to as “long time-exposures”. Use of
a tripod is recommended to prevent the
camera moving during the exposure.
A count-down timer will be displayed while the exposure is in prog-
N
ress.
To reduce “noise” (mottling) in long time-exposures, select ON for
KLONG EXPOSURE NR. Note that this may increase the time need-
ed to record images after shooting.
Using a Remote Release
An optional RR-90 remote release can be used
for long time-exposures. The RR-90 connects
via the Micro USB (Micro-B) USB 2.0 connector.
Alternatively, electronic releases from third-party suppliers can be connected via the remote
release connector (⌀2.5 mm 3-pole mini jack).
30
30”
5
Taking Photographs
A con rmation dialog will be displayed
N
when a third-party release is connected; press MENU/OK and select REMOTE
for WMOVIE SET-UP> MIC/REMOTE RELEASE.
CHECK MIC/REMOTE RELEASE
SETTING
SKIP
SET
55
Page 72
Aperture-Priority AE (A)
Choose an aperture and let the camera adjust shutter speed for
optimal exposure.
Rotate the mode dial to A.
1
A will appear in the display.
1000
5.6
A
12800
5
Taking Photographs
Use the sub-command dial to choose
2
an aperture.
If the correct exposure cannot be achieved at the selected aperture,
O
shutter speed will be displayed in red.
Previewing Depth of Field
When PREVIEW DEPTH OF FIELD is assigned
to a function button, pressing the button displays a L icon and stops aperture down to the
selected setting, allowing depth of eld to be
previewed when the view through the lens appears in the display.
56
Page 73
Choosing a Shooting Mode
Manual Exposure (M)
Alter exposure from that selected by the camera.
Rotate the mode dial to M.
1
M will appear in the display.
Rotate the main command dial to
2
choose a shutter speed and the
sub-command dial to choose the aperture.
The manual exposure display includes
N
an exposure indicator that shows the
amount the picture would be underor over-exposed at current settings.
5
4
3
2
1
0
-1
-2
-3
-4
-5
01 0.5 1.0 1.5 2.0 3.0 5.0 10
5.6
2000
M
Shutter speed
Aperture
1.0
12800
5
Taking Photographs
57
Page 74
Exposure Preview
To preview exposure in the LCD monitor, select ON for A SCREEN
SET-UP> PREVIEW EXP. IN MANUAL MODE. Select OFF when using the
ash or on other occasions on which exposure may change when the picture is taken.
5
Taking Photographs
58
Page 75
Choosing a Shooting Mode
Bulb (B)
For bulb photography, rotate the main
command dial to select a shutter speed
of BULB. Use of a tripod is recommended
to prevent the camera moving during the
exposure.
The shutter will remain open for up to 60 minutes, or for 1 second
N
when the electronic shutter is used.
A count-down timer will be displayed while the exposure is in progress.
To reduce “noise” (mottling) in long time-exposures, select ON for
KLONG EXPOSURE NR. Note that this may increase the time need-
ed to record images after shooting.
Using a Remote Release
An optional RR-90 remote release can be used
for long time-exposures. The RR-90 connects
via the Micro USB (Micro-B) USB 2.0 connector.
Alternatively, electronic releases from third-party suppliers can be connected via the remote
release connector (⌀2.5 mm 3-pole mini jack).
5
4
3
2
1
0
-1
-2
-3
-4
-5
01 0.5 1.0 1.5 2.0 3.0 5.0 10
5.6
BULB
M
1.0
12800
5
Taking Photographs
A con rmation dialog will be displayed
N
when a third-party release is connected; press MENU/OK and select REMOTE
for WMOVIE SET-UP> MIC/REMOTE RELEASE.
CHECK MIC/REMOTE RELEASE
SETTING
SKIP
SET
59
Page 76
u PANOR AMA
Follow an on-screen guide to create a panorama.
Rotate the mode dial to u
1
(PANORAMA).
To select the size of the angle through which you will pan
2
the camera while shooting, press the selector left. Highlight
a size and press MENU/OK.
Press the selector right to view a choice of pan directions.
3
Highlight a pan direction and press MENU/OK.
Press the shutter button all the way down to start recording.
4
5
Taking Photographs
There is no need to keep the shutter button pressed during
recording.
Pan the camera in the direction
5
shown by the arrow. Shooting ends
automatically when the camera is
panned to the end of the guides and
Sweep camera along yellow
line in direction of y
ANGLE DIRECTION
the panorama is complete.
For Best Results
For best results, use a lens with a focal length of 35 mm or less (50 mm or
less in 35 mm format). Prop your elbows against your sides and move the
camera slowly in a small circle at a steady speed, keeping the camera parallel or at right angles to the horizon and being careful only to pan in the
direction shown by the guides. Use a tripod for best results. If the desired
results are not achieved, try panning at a di erent speed.
60
Page 77
Choosing a Shooting Mode
Shooting ends if the shutter button is pressed all the way down during
O
shooting. No panorama may be recorded if the shutter button is
pressed before the panorama is complete.
Panoramas are created from multiple frames; exposure for the entire
panorama is determined by the rst frame. The camera may in some
cases record an greater or lesser angle than selected or be unable to
stitch the frames together perfectly. The last part of the panorama may
not be recorded if shooting ends before the panorama is complete.
Shooting may be interrupted if the camera is panned too quickly or
too slowly. Panning the camera in a direction other than that shown
cancels shooting.
The desired results may not be achieved with moving subjects, subjects close to the camera, unvarying subjects such as the sky or a eld
of grass, subjects that are in constant motion, such as waves and waterfalls, or subjects that undergo marked changes in brightness. Panoramas may be blurred if the subject is poorly lit.
5
Taking Photographs
61
Page 78
Viewing Panoramas
In full-frame playback, you can use the sub-command dial to zoom panoramas in or out. Alternatively, you can play the panorama back using the
selector.
PLAY
STOPPAUSE
Press the selector down to start playback and press again to pause. Press
the selector left or right to choose the pan direction while playback is in
progress or to scroll the panorama manually while playback is paused; vertical panoramas will scroll vertically, horizontal panoramas horizontally. To
exit to full-frame playback, press the selector up. To view other images, exit
to full-frame playback and press the selector left or right.
5
Taking Photographs
62
Page 79
Choosing a Shooting Mode
Scene
Description
h
PORTRAIT
ENHANCER (
M
LANDSCAPE
N
SPORT
O
NIGHT
SP SCENE POSITION /h/M/N/O
The camera o ers a choice of “scenes,” each adapted to particular
shooting conditions or a speci c type of subject.
Rotate the mode dial to SP (SCENE
1
POSITION).
The following scenes can be selected directly using the
mode dial:
Scene
Choose for a smooth skin eff ect when shooting por-
PORTRAIT
h
ENHANCER (ZZ))
traits. If ON is selected for K TOUCH SCREEN
SETTING> TOUCH SCREEN ON/OFF, you can
choose the portrait enhancement level using touch
controls.
M
LANDSCAPE
N
SPORTChoose when photographing moving subjects.
O
NIGHTChoose for poorly lit twilight or night scenes.
Choose for daylight shots of buildings and landscapes.
Description
5
Taking Photographs
Press MENU/OK while the mode de-
2
SCENE POSITION
scription is displayed.
If the view through the lens is displayed in the LCD monitor, press
N
MENU/OK and select ASCENE POSITION in the shooting menu.
NIGHT(TRIPOD)
Clear shots of
night scenery with a
slow shutter speed.
63
Page 80
5
Scene
Description
h
PORTRAIT
H
NIGHT (TRIPOD)
p
FIREWORKS
Q
SUNSET
R
SNOW
s
BEACH
U
PARTY
V
FLOWER
W
TEXT
j
MULTIPLE
EXPOSURE
Taking Photographs
Highlight the desired scene.
3
Scene
h
PORTRAITChoose for portraits.
H
NIGHT (TRIPOD)Choose this mode for slow shutter speeds when
shooting at night.
p
FIREWORKSSlow shutter speeds are used to capture the expand-
ing burst of light from a fi rework.
Q
SUNSETChoose this mode to record the vivid colors in sun-
rises and sunsets.
R
SNOWChoose for crisp, clear shots that capture the bright-
ness of scenes dominated by shining white snow.
s
BEACHChoose for crisp, clear shots that capture the bright-
ness of sunlit beaches.
U
PAR TYCapture indoor background lighting under low-light
conditions.
V
FLOWEREff ective for taking more vivid shots of fl owers.
W
TEXTTake clear pictures of text or drawings in print.
j
MULTIPLE
EXPOSURE
Press MENU/OK to select the highlighted scene.
4
Create a photograph that combines two exposures
(P 65).
Description
64
Page 81
Choosing a Shooting Mode
2.030
j Multiple Exposures
Create a photograph that combines two exposures.
Select jMULTIPLE EXPOSURE in the scene position menu.
1
Take the rst shot.
2
Press MENU/OK. The rst shot will be
3
shown superimposed on the view
through the lens and you will be
prompted to take the second shot.
To return to Step2 and retake the rst
N
shot, press the selector left. To save
the rst shot and exit without creating
a multiple exposure, press DISP/BACK.
Take the second shot, using the rst
4
NEXT
frame as a guide.
EXIT
EXITRETRY
5
Taking Photographs
Press MENU/OK to create the multiple
5
exposure, or press the selector left to
return to Step 4 and retake the second shot.
EXITRETRY
65
Page 82
Adv. ADVANCED FILTER
Filter
Description
GG TOY CAMERA
II POP COLOR
JJ HIGH-KEY
ZZ LOW-KEY
EE FISH-EYE
KK DYNAMIC TONE
ii HDR ART
HH MINIATURE
Take photos with lter e ects.
Rotate the mode dial to Adv.
1
(ADVANCED FILTER).
5
Taking Photographs
Press MENU/OK while the mode de-
2
ADVANCED FILTER
scription is displayed.
If the view through the lens is displayed in the LCD monitor, press
N
MENU/OK and select d ADVANCED FILTER in the shooting menu.
Highlight one of the following options and press MENU/OK.
3
Filter
TOY CAMERAChoose for a retro toy camera eff ect.
POP COLOR
HIGH-KEYCreate bright, low-contrast images.
LOW-KEY
FISH-EYECreate a distorting eff ect of a fi sheye lens.
DYNAMIC TONE
HDR ART
MINIATURE
Create high-contrast images with saturated
colors.
Create uniformly dark tones with few areas of
emphasized highlights.
Dynamic tone expression is used for a fantasy
eff ect.
Create artistic eff ect by emphasizing tone reproduction and dynamic range.
The tops and bottoms of pictures are blurred
for a diorama eff ect.
Description
TOY CAMERA
Create shaded borders
as taken by toycameras.
(nostalgic effect)
66
Page 83
Choosing a Shooting Mode
Filter
Description
LL CROSS SCREEN
uu PARTIAL COLOR (RED)
vv PARTIAL COLOR (ORANGE)
ww PARTIAL COLOR (YELLOW)
xx PARTIAL COLOR (GREEN)
yy PARTIAL COLOR (BLUE)
zz PARTIAL COLOR (PURPLE)
jj FOG REMOVE
XX SOFT FOCUS
Filter
Create a star pattern where lines radiate out
CROSS SCREEN
PARTIAL COLOR (RED)
PARTIAL COLOR (ORANGE)
PARTIAL COLOR (YELLOW)
PARTIAL COLOR (GREEN)
PARTIAL COLOR (BLUE)
PARTIAL COLOR (PURPLE)
FOG REMOVECreate clearer image by removing fog factor.
SOFT FOCUS
Depending on the subject and camera settings, images may in
N
some cases be grainy or vary in brightness or hue.
from bright objects. The eff ects of the cross
screen fi lter can be viewed after shooting.
Areas of the image that are the selected color
are recorded in that color. All other areas of the
image are recorded in black-and-white.
Create a look that is evenly soft throughout the
whole image.
Description
5
Taking Photographs
67
Page 84
5
Taking Photographs
Autofocus
Take pictures using autofocus.
Use FAF/MF SETTING> FOCUS MODE to choose a focus
1
mode (P 69).
Use FAF/MF SETTING> AF MODE to choose an AF mode
2
(P 71).
Choose the position and size of the
3
focus frame (P 73).
Take pictures.
4
For information on the autofocus system, visit:
N
http://fujifilm-x.com/af/en/index.html
68
Page 85
Autofocus
Mode
Description
p
k
l
Focus Mode
Use the FOCUS MODE option in the F AF/MF SETTING menu to
choose how the camera focuses.
Press MENU/OK to display the menus.
1
Select FAF/MF SETTING> FOCUS MODE in the shooting
2
menu.
Choose from the following options:
3
Mode
p
MANUAL FOCUS
k
CONTINUOUS AF
l
SINGLE AF
Regardless of the option selected, manual focus will be used when the
N
lens is in manual focus mode.
If ON is selected for
justed continuously in modes l and k even when the shutter button is not pressed.
Focus manually using the lens focus ring. Choose for manual control of focus or in situations in which the camera is
unable to focus using autofocus (P 77).
Focus is continually adjusted to refl ect changes in the distance to the subject while the shutter button is pressed
halfway. Use for subjects that are in motion. Eye-detection
AF is not available.
Focus locks while the shutter button is pressed halfway.
Choose for stationary subjects.
F AF/MF SETTING> PRE-AF, focus will be ad-
Description
5
Taking Photographs
69
Page 86
The Focus Indicator
The focus indicator turns green when the subject is in focus and blinks white when the camera is unable to focus. Brackets (“( )”) indicate
that the camera is focusing and are displayed
continuously in mode k. j is displayed in
manual focus mode.
5
Taking Photographs
1000
5.6
P
Focus indicator
12800
70
Page 87
Autofocus Options (AF Mode)
Focus Mode
l
(SINGLE AF)
Option
Description
Sample image
Choose how the camera focuses in modes l and k.
Press MENU/OK and go to the shooting menu.
1
Select FAF/MF SETTING> AF MODE.
2
Choose an AF mode.
3
How the camera focuses depends on the focus mode.
l
Option
(SINGLE AF)
Description
Sample image
Focus Mode
Autofocus
r
SINGLE POINT
y
ZONE
z
WIDE
j
ALL
Camera focuses on subject in
selected focus point. Use for pinpoint focus on selected subject.
Camera focuses on subject in selected focus zone. Focus zones include multiple focus points, making it easier to focus on subjects in
motion.
Camera focuses automatically on
high-contrast subjects; display
shows areas in focus.
Rotate the sub-command dial in the focus-point selection display (P 74, 75) to cycle through AF modes in the following order: r SINGLE POINT, y ZONE, and z WIDE.
71
5
Taking Photographs
Page 88
Focus Mode
Focus Mode
k
(CONTINUOUS AF)
Option
Description
Sample image
Option
k
(CONTINUOUS AF)
Description
Sample image
5
Taking Photographs
r
SINGLE POINT
y
ZONE
z
TRACKING
j
ALL
Focus tracks subject at selected focus point. Use for subjects moving
toward or away from camera.
Focus tracks subject in selected focus zone. Use for subjects that are
moving fairly predictably.
Focus tracks subjects moving
through wide area of frame.
Rotate the sub-command dial in the focus-point selection display (P 74, 75) to cycle through AF modes in the following order: r SINGLE POINT, y ZONE, and z TRACKING.
72
Page 89
Focus-Point Selection
Choose a focus point for autofocus.
Viewing the Focus-Point Display
Press the selector up (AF) to view the
1
focus-point display.
Use the selector and sub-command
2
dial to position the focus frame over
the desired focus point.
Autofocus
Focus-area selection can also be accessed via the shooting menu.
N
5
Taking Photographs
73
Page 90
Selecting a Focus Point
AF mode
Selector
DISP/BACK button
Sub-command dial
Press
Press
Rotate
Press
r
y
z
Use the selector to choose the focus
point and the sub-command dial to
choose the size of the focus frame. The
procedure varies with the option selected for AF mode.
5
Taking Photographs
Selector
AF mode
Press
r
Select focus point
y
z
Manual focus-point selection is not available when z WIDE/
N
TRACKING is selected in focus mode l.
If j ALL is selected for AF MODE, you can rotate the sub-command
dial in the focus-point selection display (P 75) to cycle through
AF modes in the following order: r SINGLE POINT (5frame sizes),
y ZONE (3 frame sizes), and either z WIDE (focus mode l) or
z TRACKING (focus mode k).
DISP/BACK button
Press
Select center
focus point
Sub-command dial
Rotate
Choose from 5
frame sizes
Choose from 3
frame sizes
Press
Restore origi-
nal size
—
74
Page 91
Autofocus
AF mode
rr SINGLE POINT
yy ZONE
zz WIDE/TRACKING
The Focus-Point Display
The focus-point display varies with the option selected for AF
mode.
Focus frames are shown by small squares (), focus zones by the large
N
squares.
AF mode
SINGLE POINT
ZONE
WIDE/TRACKING
Choose single focus point. Choose from zones with
7 × 7, 5 × 5, or 3 × 3 focus
points.
Available Focus Points
TTL contrast-detect AF o ers more focus points (
than intelligent hybrid AF (B), which combines
phase-detection with TTL contrast-detect AF.
Burst Mode Focus-Frame Selection
When continuous high-speed (J) is selected for drive mode, the number
of focus frames available in focus mode k drops.
Single pointZoneTracking
Position focus frame over
subject and press MENU/OK.
)
A
75
5
Taking Photographs
Page 92
Autofocus
Although the camera boasts a high-precision autofocus system, it may be
unable to focus on the subjects listed below.
Very shiny subjects such as mirrors or car bodies.
•
Subjects photographed through a window or other re ective object.
•
Dark subjects and subjects that absorb rather than re ect light, such as
•
hair or fur.
Insubstantial subjects, such as smoke or ame.
•
Subjects that show little contrast with the background.
•
Subjects positioned in front of or behind a high-contrast object that is
•
also in the focus frame (for example, a subject photographed against a
backdrop of highly contrasting elements).
Checking Focus
To zoom in on the current focus area for precise
focus, press the center of the sub-command
dial. Press again to cancel zoom.
5
Taking Photographs
Autofocus
Normal displayFocus zoom
In focus mode l, zoom can be adjusted by rotating the sub-com-
N
mand dial. Focus zoom is not available in focus mode k or when
F AF/MF SETTING> PRE-AF is on or an option other than SINGLE
POINT is selected for AF MODE.
76
Page 93
Manual Focus
Adjust focus manually.
Select MANUAL FOCUS for F AF/MF
1
SETTING> FOCUS MODE.
j will appear in the display.
Focus manually using the lens focus
2
ring. Rotate the ring left to reduce
the focus distance, right to increase.
Take pictures.
3
Use the I FOCUS RING option in the setup menu to reverse the di-
N
rection of rotation of the focus ring.
Regardless of the option selected, manual focus will be used when the
lens is in manual focus mode.
INSTANT AF can be assigned to the Fn button, allowing the button
to be used to quickly focus on the subject in the selected focus frame
when the camera is in manual focus mode.
5
4
3
2
1
0
-1
-2
-3
-4
-5
01 0.5 1.0 1.5 2.0 3.0 5.0 10
5.6
2000
M
1.0
12800
5
Taking Photographs
77
Page 94
Checking Focus
A variety of options are available for checking focus in manual
focus mode.
The Manual Focus Indicator
The manual focus indicator indicates how
closely the focus distance matches the
Focus distance
(white line)
distance to the subject in the focus brackets. The white line indicates the distance
to the subject in the focus area (in meters
5.6
Depth of eld
or feet according to the option selected
for
A
SCREEN SET-UP> FOCUS SCALE UNITS in the setup menu),
the blue bar the depth of eld, or in other words the distance in
front of and behind the subject that appears to be in focus.
If both AF DISTANCE INDICATOR and MF DISTANCE INDICATOR are
N
5
Taking Photographs
selected in the
depth of eld can also be previewed using the depth-of- eld indicator
in the standard display. Use the DISP/BACK button to display standard
indicators.
ASCREEN SET-UP> DISP. CUSTOM SETTING list,
Focus Zoom
If ON is selected for A SCREEN SET-UP> FOCUS CHECK, the
camera will automatically zoom in on the selected focus area
when the focus ring is rotated. Zoom can be adjusted by rotating the sub-command dial. Press the center of the sub-command
dial to exit zoom.
Manual Focus
Focus Peaking
Select FOCUS PEAK HIGHLIGHT for cMF ASSIST to highlight
high-contrast outlines. When focusing, rotate the focus ring until
the subject is highlighted.
cMF ASSIST options can be accessed by pressing and holding the
N
center of the sub-command dial.
78
Page 95
d Exposure Compensation
Adjust exposure.
Rotate the main command dial to adjust
exposure.
The amount of compensation available varies with the shooting
O
mode.
5
Taking Photographs
79
Page 96
Focus/Exposure Lock
Compose photographs with o -center subjects.
Focu s: Position the subject in the fo-
1
cus frame and press the shutter button halfway to lock focus and exposure. Focus and exposure will remain
locked while the shutter button is
pressed halfway (AF/AE lock).
Recompose: Keep the shutter button
2
pressed halfway.
5
Taking Photographs
Shoot: Press the button all the way down.
3
The AF-L and AE-L Buttons
If AE-LOCK, AF-LOCK, or AE/AF LOCK is
assigned to the Fn button, the focus and/
or exposure will lock while the Fn button
is pressed and remain locked even when
the shutter button is pressed halfway.
80
Page 97
WB White Balance
For natural colors, choose a white balance
option that matches the light source.
Press the selector right (WB) to dis-
1
play white balance options.
Highlight the desired option and ei-
2
WB SHIFTAUTO
ther press MENU/OK to select the highlighted option and view a display
where white balance can be netuned using the selector, or press
DISP/BACK to select the highlighted
R:0 B:0
SET
option with no ne tuning.
White balance options can also be accessed from the shooting menu.
N
5
Taking Photographs
81
Page 98
WHITE BALANCE
Option
Description
The following white balance options are available.
5
Taking Photographs
Option
AUTOWhite balance is adjusted automatically.
h
k
i
j
k
l
m
n
g
Results vary with shooting conditions. Play pictures back after shoot-
N
ing to check colors.
White balance is adjusted for ash lighting only in AUTO and g
modes. Turn the ash o using other white balance options.
Measure a value for white balance.
Choose a color temperature.
For subjects in direct sunlight.
For subjects in the shade.
Use under “daylight” fl uorescent lights.
Use under “warm white” fl uorescent lights.
Use under “cool white” fl uorescent lights.
Use under incandescent lighting.
Reduces the blue cast typically associated with underwater lighting.
Description
82
Page 99
White Balance
Custom White Balance
Choose h to adjust white balance for
CUSTOM WB
unusual lighting conditions. White balance measurement options will be displayed; frame a white object so that it lls
the display and press the shutter button
all the way down to measure white bal-
SHUTTER : NEW WB
SHIFTNOT CHANGE
ance (to select the most recent custom value and exit without
measuring white balance, press DISP/BACK, or press MENU/OK to select the most recent value and display the ne-tuning dialog).
If “COMPLETED!” is displayed, press MENU/OK to set white balance to
•
the measured value.
If “UNDER” is displayed, raise exposure compensation and try again.
•
If “OVER” is displayed, lower exposure compensation and try again.
•
5
Taking Photographs
83
Page 100
k: Color Temperature
Selecting k in the white balance menu
WHITE BALANCE
displays a list of color temperatures;
highlight a color temperature and press
MENU/OK to select the highlighted option
COLOR TEMPERATURE
R:0 B:0
and display the ne-tuning dialog.
SETSHIFT
Color Temperature
Color temperature is an objective measure of the color of a light source,
expressed in Kelvin (K). Light sources with a color temperature close to that
of direct sunlight appear white; light sources with a lower color temperature have a yellow or red cast, while those with a higher color temperature
are tinged with blue. You can match color temperature to the light source,
or choose options that di er sharply from the color of the light source to
make pictures “warmer” or “colder.”
5
Taking Photographs
White Balance
10000
9100
8300
7700
7100
K
K
K
K
K
84
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.