Frigidaire FRT21KS5AW2, FRT21KS5AQ2, FRT21FD3AT2, FRT21FD3AQ2, FRT21FD3AZ2 Owner’s Manual

...

0 (0)

Espa_ol ........... 23

Frangais ........... 45

perature Controls ....... 11

Looking Inside .......... 12 - 14

Ice Service .................... 15

Food Storage

& Energy Saving Tips ....... 16

....... 6-9 L_

ilance ........ .10

IS]

121

Normal Operating Sounds .. 17

Care & Cleaning .......... 18- 19

Warranty ...................... 20

Before You Call ............... 21

READ AND SAVE THESE INSTRUCTIONS pIN240400104(0107)

Congratulations on your purchase of a new refrigerator! We

here at Electrolux Home Products are very proud of our

product and we are completly committed to providing you

with the best service possible. Your satisfaction is our #1

priority.

Please read this Use & Care Manual very carefully. Itcontains

valuable information on how to properly maintain your new

refrigerator.

We know you'll enjoy your new refrigerator and Thank You

for choosing our product. We hope you consider us for future

purchases.

PLEASE READ AND SAVETHESEINSTRUCTIONS

This Use & Care Manual provides specific operating

instructions for your model. Use your refrigerator only as

instructed in this manual. These instructions are not meant

to cover every possible condition and situation that may

occur. Common sense and caution must be practiced when

installing, operating and maintaining any appliance.

Please record your model and serial numbers below for

future reference. This information is found on your serial

plate located inside the refrigerator compartment.

Model Number:

Serial Number:

Purchase Date:

Questions?

1-800-944-9044

(United States)

1-866-213-9397

(Canada)

Extend Your Warranty Protection

With An

Extended Service Contract

CALL 1-800-944-9044

To Enjoy These Benefits:

Total freedom from repair bills so

unexpected repairs won't upset your

budget.

Fast, convenient toll-free service is just

a phone call away.

Top-quality repairs by factory-trained

experts.

Quick access to genuine replacement

parts so you can rest assured your

refrigerator is repaired with the proper

components.

Please complete and mail in the Product

Registration Card included with your

refrigerator.

Please attach sales receipt

here for future reference.

FORYOURSAFETY

• Donotstoreorusegasoline,orotherflammableliquids

inthevicinityofthisoranyotherappliance.Readpro-

ductlabelsforwarningsregardingflammabilityandother

hazards.

• Donotoperatetherefrigeratorinthepresenseof

explosivefumes.

• Avoidcontactwithanymovingpartsofautomaticice

maker.

• Removeallstablesfromthecarton.Staplescancause

severecuts,andalsodestroyfinishesiftheycomein

contactwithotherappliancesorfurniture.

CHILD SAFETY

Destroyorrecyclethecarton,plasticbags,andanyexterior

wrappingmaterialimmediatelyaftertherefrigeratoris

unpacked.ChildrenshouldNEVERusetheseitemstoplay.

Cartonscoveredwithrugs,bedspreads,plasticsheetsor

stretchwrapmaybecomeairtightchambers,andcanquickly

causesuffocation.

PROPER DISPOSAL OF YOUR REFRIGERATOR

OR FREEZER

Risk of child entrapment

Child entrapment and

suffocation are not problems of

the past. Junked or abondoned

refrigerators or freezers are still

dangerous - even if they will sit

for "just a few days." If you are

getting rid ofyour old refrigerator

or freezer, please follow the

instructions below to help

prevent accidents.

Before you throw away your old refrigerator/freezer:

• Remove doors.

• Leave shelves in place so children may not easily climb

inside.

• Have refrigerant removed by a qualified service

technician.

ELECTRICAL INFORMATION

• The refrigerator must be plugged into its own

dedicated 115Volt, 60 Hz., AC only electric outlet.

The power cordof the appliance is equipped with a

three-prong grounding plug for yourprotectionagainst

electrical shock hazards. It must be plugged directly

intoa properlygrounded three-prong receptacle. The

receptacle must be installed inaccordance with local

codes and ordinances. Consult a qualified electrician.

Do not use an extension cord or adapter plug.

• Immediately repair or replace any power cord that

becomes frayed or damaged.

• Never unplugthe refrigerator by pullingon the power

cord. Always grip the plug firmly, and pull straight out

from the receptacle to prevent damagingthe power cord.

• Unplugthe refrigerator before cleaning and before

replacing a light bulb to avoid electrical shock.

• Performance may be affected ifthe voltage varies by

10% or more. Operating the refrigerator with insufficient

power can damage the compressor. Such damage is

not covered under your warranty.

• Do not plug the unit intoan outlet controlled by a wall

switch or pullcord to prevent the refrigerator from being

turned off accidentally.

• Avoid connecting refrigerator toa Ground Fault

Interruptor (G FI) circuit.

This Use & Care Manual provides specific operating

instructions for your model. Use the refrigerator only as

instructed in this Use & Care Manual. Before starting the

refrigerator, follow these important first steps.

LOCATION

• Choose a place that is near a grounded electrical outlet.

Do Not use an extension cord or an adapter plug.

• If possible, place the refrigerator out of direct sunlight

and away from the range, dishwasher or other heat

sources.

• The refrigerator must be installed on a floor that is level

and strong enough to support a fully loaded refrigerator.

• Consider water supply availability for models equipped

with an automatic ice maker.

INSTALLATION

• Do Not install the refrigerator where the temperature

will drop below 55°F (13°C) or rise above 110°F (43°C).

The compressor will not be able to maintain proper

temperatures inside the refrigerator.

_i_U lati_n i e_sential t_pro_e _pbrmti_ of

Installation Clearances

• Allow the following clearances for ease of installation,

proper air circulation, and plumbing and electrical

connections:

Sides & Top 3/8"

Back 1"

DOOR OPENING

LEVELING

All four corners of your refrigerator must rest firmly on a

solid floor. Your refrigerator is equipped with adjustable front

rollers to help level your unit.

To Level Your Refrigerator:

1. Remove toe grille.

2. Use flat-blade screwdriver or 3/8" socket wrench

to adjust front rollers.

Your refrigerator should be positioned to allow easy access

to a counter when removing food. To make this possible, the

direction in which the doors open can be reversed. See Door

Removal & Reversal Instructions on page 6.

Before Installing The Water Supply Line, You Will Need

• Basic Tools: adjustable wrench, flat-blade screwdriver, and Phillips TM screwdriver

• Access to a household cold water line with water pressure between 20 and 120 psi.

• Awater supply line made of ¼ inch (6.4 mm) OD, copper tubing. To determine the length of copper tubing needed,

you will need to measure the distance from the ice maker inlet valve at the back of the refrigerator to your cold water

pipe. Then add approximately 7 feet (2.1 meters), so the refrigerator can be moved out for cleaning (as shown).

• Ashutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type

shutoff valve.

• A compression nut and ferrule (sleeve) for connecting the water supply line to the ice maker inlet valve.

To Connect Water Supply Line To Ice Maker Inlet Valve

1. Disconnect refrigerator from electric power source.

2. Place end of water supply line into sink or bucket. Turn ON water supply

and flush supply line until water is clear. Turn OFF water supply at shut

off valve.

3. Unscrew plastic cap from water valve inlet and discard cap.

4. Slide brass compression nut, then ferrule (sleeve) onto water supply line,

as shown.

5. Push water supply line into water valve inlet as far as it will go (¼ inch).

Slide ferrule (sleeve) into valve inlet and finger tighten compression nut

onto valve. Tighten another half turn with a wrench; DO NOT over tighten.

6. With steel clamp and screw, secure water supply line to rear panel of

refrigerator as shown.

7. Coil excess water supply line (about 2½ turns) behind refrigerator as shown

and arrange coils so they do not vibrate or wear against any other surface.

8. Turn ON water supply at shutoff valve and tighten any connections that

leak.

9. Reconnect refrigerator to electrical power source.

10. To turn ice maker on, lower wire signal arm (see ice maker front cover for ON/

OFF position of arm).

ToolsNecessary:

Phillips" head

Quadrex head

screwdriver

Knife

Socket Adjustable

Wrench Set Wrench

Awl

Cabinet Hole

Plugs

.,ngeHole

DOOR REMOVAL AND REVERSAL INSTRUCTIONS:

i!i!iiiiiii_il

iiiiiiili_iill

1. Remove toe grille and top hinge cover.

2. Remove top hinge with 3/8" hex driver and lift freezer door off of

center hinge pin. Set door aside.

3. Unscrew center hinge pin using adjustable wrench and save for

reassembly. Ensure plastic washer stays on hinge pin.

4. Lift refrigerator door off of bottom hinge and set aside.

5. Remove center hinge and shim by removing inside screw and

loosening two outside screws enough to allow hinge and shim to

slide out. Tighten screws.

6. Loosen two outside screws on opposite side of refrigerator, remove

inside screw and install center hinge.

Remove bottom hinge with 3/8" hex driver. Reinsert two outside screws

in holes and tighten. Inside screw will go to opposite side in step 8.

Remove two outside screws on opposite side of refrigerator and install

bottom hinge. Insert and tighten screw saved from step 7.

9. Unscrew bottom hinge pin using adjustable wrench. Move hinge pin

to other hole in hinge and tighten with adjustable wrench.

10. Reverse door handles (see instructions on next page).

11. Move freezer and refrigerator door stops to opposite side. Before

starting screws, use an awl to puncture the foam.

12. Position refrigerator door onto bottom hinge pin and screw center

hinge pin through center hinge into top of door. Close refrigerator door

to help align hinge hole.

13. Tighten center hinge pin with adjustable wrench.

14. Remove cabinet and hinge hole plugs and move to opposite side.

15. Lower freezer door onto center hinge pin.

16. Close freezer door. Have an assistant lift up on opposite side of door

while tightening screws to install top hinge.

17. Replace toe grille and top hinge cover.

18. Plug in electrical power cord and turn refrigerator temperature control

to center position. Adjust setting as necessary.

TO REMOVE FREEZER HANDLE:

(Handles may be easier to reverse while doors are off.)

1. Remove two screws attaching handle to bottom of freezer door.

2. Remove short trim piece by sliding trim straight up and off of handle

bracket.

3. Remove screw attaching top of handle to door.

4. Magnetic Nameplate Models: Gently pry magnetic nameplate frame from

door. Remove nameplate from its frame, turn frame upside down and

install in old handle holes. Insert magnetic nameplate into frame.

Self-Adhesive Nameplate Models: Gently peel off nameplate from door

and reapply over old handle holes.

TO ATTACH FREEZER HANDLE:

1. Reinstall handle on opposite side, using same hole as nameplate.

2. Attach handle to bottom of door.

3. Slide trim piece straight down onto handle bracket.

TO REMOVE FREEZER HANDLE:

(Handles may be easier to reverse while doors are off.)

1. Remove two screws attaching handle to bottom of freezer door.

2. Swing bottom of handle away from the door and slide handle straight up

and off of dovetail button.

3. Remove screw and dovetail button and install on other side, using the

same holes as nameplate.

4. Magnetic Nameplate Models: Use putty knife to gently pry magnetic

nameplate frame from door. Remove nameplate from its frame, turn frame

upside down and install in old handle holes. Insert magnetic nameplate

into frame.

Self-Adhesive Nameplate Models: Use putty knife to gently peel off name

plate from door and reapply over old handle holes.

TO ATTACH FREEZER HANDLE:

1. Start with handle offset away from door. Place top of handle over dovetail

button, swing handle into an upright position and pull downward, locking it

into place.

2. Secure bottom of handle with two screws removed earlier.

TO REMOVE FREEZER HANDLE:

(Handles may be easier to reverse while doors are off.)

1. Remove two screws attaching handle to bottom of freezer door.

2. Remove button plug using edge of putty knife.

3. Remove screw on side of freezer door and remove handle.

TO ATTACH FREEZER HANDLE:

1. Secure side of handle to door and replace button plug.

2. Secure handle to bottom of door.

TRIM REMOVAL (FULL-LENGTH TRIMMODELSONLY)

In some models, the refrigerator door has a full length trim piece which

continuesfrom the bottom ofthe handle tothe bottom ofthe door.The top

ofthe trimattaches to the handle bracket (Figure 1) orfits around the base

ofthe handle (Figure 2). An adhesive "trim lock"is positionedabout halfway

down. The bottomofthetrim is heldinplace by either anadhesive trimlock,

or a trimlockwithtwo prongsinserted intoa hole on theface of the door.

TO REMOVE TRIM:

1. Remove trim by gently pulling trim lock areas out and away from door.

2. When trim isfree from door, slide the trim straight down and away

from base of handle.

TO REMOVE REFRIGERATOR HANDLE:

(Handles may be easier to reverse while doors are off.)

Figure 1Style Handles

1. Remove two screws attaching handle to top of refrigerator door.

2. Remove screw attaching bottom of handle to door.

3. Remove two hole plugs and hinge pin plug on top of door and install

on opposite side. Use Phillips head screwdriver to remove plastic

screw plug from front of door and install on opposite side

Figure 2 Style Handles

1. Remove two screws attaching handle to top of refrigerator door.

2. Swing top of handle away from door and slide handle down and off of

dovetail button.

3. Remove screw and dovetail button and install on other side, moving

hole plugs from corresponding holes to opposite side.

TO ATTACH REFRIGERATOR HANDLE:

Figure 1Style Handles

1. Secure bottom of handle with screws.

2. Secure top of handle with screws.

Figure 2 Style Handles

1. Start with handle offset away from door. Place bottom of handle over

dovetail button, swing handle into an upright position and pull upward,

locking it into place.

2. Secure top of handle with screws.

TO ATTACH TRIM:

1. Slide both trim locks out of trim.

2. Insert new adhesive trim locks contained in your literature pack.

Figure 1

3. Install trim to handle by sliding under base of handle. Carefully align

trim and press down at trim lock locations.

4. Use rubbing alcohol to remove any adhesive residue from old trim

lock locations.

Figure 2

TO REMOVE REFRIGERATOR HANDLE:

(Handles may be easier to reverse while doors are off.)

1. Remove two screws attaching handle to top of refrigerator door.

2. Remove button plug using edge of putty knife.

3. Remove screw on side of refrigerator door and remove handle.

4. Reverse freezer and refrigerator handles as shown in figure 3.

Figure 3 - Handle Reversal

Refrigerator Door Without Trim

TO ATTACH REFRIGERATOR HANDLE:

1. Secure side of handle to door and replace plug button.

2. Secure handle to top of door.

REMOVING STAINLESS STEEL DOORS AND HANDLES

To Remove Doors

Stainless steel doors are not reversible. Follow these steps to remove doors.

1. Remove toe grille and top hinge cover.

2. Remove top hinge and lift freezer door off of center hinge pin. Set door

aside.

3. Unscrew center hinge pin using adjustable wrench and save for

reassembly. Ensure plastic washer stays on hinge pin.

4. Lift refrigerator door off of bottom hinge and set aside.

5. Remove center hinge and shim by removing inside screw and loosening

two outside screws enough to allow hinge to slide out.

6. Remove bottom hinge. Reinsert two outside screws in holes and tighten.

7. Reverse steps 1 - 6 to reinstall doors

To Remove Handles

1. Firmly hold freezer handle while loosening set screws with 3/32" allen

wrench. Remove freezer handle.

2. Repeat step 1for refrigerator door.

Typical Handle

Ice

Ice Bucket

Freezer Shelf

Freezer

Control

Refrigerator

Control

Dell Drawer

Cover

Deli Drawer

Half Shelf

Wine Rack

Special Item Rack

Full Shelf

Freezer Light

Crisper Cover

Crisper

Drawers --

_Toe Grille

_-- Fixed Door Bin

Door Rack

Dairy Door

Tall Bottle

Retainer

"_ Snugger

Door Bin

------ Fixed Door Bin

Door Rack

Features may vary according to model

COOL DOWNPERIOD

Toensuresafe foodstorage, allow the refrigerator to operate with the doors closed for at least 8 to 12 hoursbefore loading

it with food.

REFRIGERATOR & FREEZER CONTROLS

TEMPERATURE ADJUSTMENT

• Adjust temperature gradually: move the knob in small

increments, allowing the temperature to stabilize.

• For colder tern peratures, turn the knob towards Cold.

• For warmer temperatures, turn the knob towards Warm.

Turning the refrigerator control willchange temperatures in both

compartments. For example, ifthe refrigerator control isturned

to a colder setting, the freezer control may have to be adjusted

to a warmer setting. Turning the freezer control will change

only the freezer temperature.

To maintain tern peratures, a fan circulates air in the refrigerator

and freezer compartments. For good circulation, do not block

cold air vents with food items.

Recommended

se_ing

Freezer Control (some models)

Allow 24 hrs Jot

adjustments

o I

0 Cold

Refrigerator Control (some models)

Fresh O,,....t_

Food Freezer

0 _ _ !_ 0

W_rm _ C_d

Refrigerator & Freezer Control (some models)

TEMPERATURE ADJUSTMENT GUIDE

If Refrigerator compartment Is Too Warm Turn Refrigerator Control Slightly Towards Cold.

If Refrigerator compartment Is Too Cold Turn Refrigerator Control Slightly Towards Warm.

If Freezer compartment Is Too Warm Turn Freezer Control Slightly Towards Colder.

If Freezer compartment Is Too Cold Turn Freezer Control Slightly Towards Warmer.

To Turn Refrigerator Off Turn Refrigerator Control To 0.

SHELF ADJUSTMENT

Refrigeratorshelves are easilyadjustedtosuitindividualneeds. Beforeadjusting

the shelves, remove all food.

To adjust sliding shelves:

O Remove shelf by pullingforward to stop position.

_1 Liftfront edge up and pullout.

Replace the shelf on any pair of rails by reversing this procedure.

To adjust cantilever shelves:

Sliding Wire Shelf

Lift front edge up. ..........

_1 Pull shelf out.

Replace the shelf by inserting the hooks at rear of the shelf into the wall

bracket. Lower the shelf into the desired slots and lock into position.

SpillSafe TM glass shelves (some models) catch and hold accidental spills. In

some models, the SpillSafe TM shelves slide out for easy access to food and

for fast cleaning. The shelves slide out independently ofthe cantilever brackets.

Just pull the front of the shelf forward. The shelf can be extended as far as the ..........................................................................................................................................................................................................................................................

stopper will allow but it is not removable from the cantilever bracket.

Sliding Glass Shelf

Full Width Cantilever Glass Shelf

Cantilever Glass Shelf- Fixed and Sliding

DOOR STORAGE

Door bins, shelves, and racks are provided for convenient

storage of jars, bottles, and cans. Frequently used items

can be quickly selected.

Some models have door racks or bins that can accommodate

gallon-sized plastic drink containers and economy-sized jars

and containers. Some racks are adjustable for maximum

storage capacity.

The dairy compartment, which is warmer than the general

food storage section, is intended for short term storage of

cheese, spreads, or butter.

Door Rack

TALL BOTTLE RETAINER (SOME MODELS)

The Tall BottleRetainer keepstall containersinthe bin from

falling forward when opening or closing the refrigerator door.

To install, hold the retainer at the top, and slide it over the

outside wall of the bin, as shown in the diagram. The Tall

Bottle Retainer works best with a Bin Snugger.

ADJUSTABLE DOOR BINS

Some models have adjustable doorbins that can be moved

to suit individualneeds.

To move door bins

1. Lift bin straight up.

2. Remove bin.

3. Place bin in desired position.

4. Lower bin onto supports until locked in place.

Adjustable Door Bin

Tall Bottle Retainer (left) and Bin Snugger (right)

SPECIAL ITEM RACK (SOME MODELS)

The innovative design of the Special Item Rack allows you

to store a six-pack of 12 ounce drink cans, a bottle of wine,

a two-liter soft drink bottle, or a carton of eggs. The Special

Item Rack mounts on the left side of your refrigerator. To

install, just slide the Special Item Rack onto any shelf as

shown in the drawing.

Special Item Rack

CRISPERS (SOME MODELS)

The crispers, located under the bottom refrigerator shelf,

are designed for storingfruits, vegetables, and other fresh

produce.Wash itemsinclearwater and remove excesswater

before placingthem inthe crispers. Itemswith strong odors

or highmoisture contentshould be wrapped before storing.

Crisper Drawer

DELl DRAWER (SOME MODELS)

Some models are equipped with a Deli Drawer for storage of

luncheon meats, spreads, cheeses, and other deli items.

HUMIDITY CONTROL (SOME MODELS)

The Humidity Control, present on some models with crisper

drawers, allowsyou to adjustthe humidity withinthe crisper.

This can extend the life of fresh vegetables that keep best

in high humidity.

Low

Humidity _

Crisper Humidity Control

Deli Drawer

WINE RACK (SOME MODELS)

The Wine Rack stores bottles of wine, or single two-liter

plastic bottlesofjuice or soda pop. To install, slide the Wine

Rack onto the shelf with the curve facing in. To remove,

slide the Wine Rack out. Install on either side of shelf.

Wine Rack

If your refrigerator has an automatic ice maker, it will provide a sufficient

supply of ice for normal use. During the initial startup of your refrigerator,

however, no ice will beproduced during the first24 hours ofoperation. Automatic

ice makers are also optional accessories that may be installed in most models

at any time. Call your local dealer for information.

TURNING YOUR ICE MAKER ON

After the plumbing connections have been completed, the water supply valve

must be opened. Place the ice container under the ice maker, pushing it as far

back as possible. Lower the wire signal arm to its "down" or ON position. New

plumbing connections may cause the first production of ice cubes to be

discolored or have an odd flavor. These first cubes should be discarded until

the cubes produced are free of discoloration and taste.

TURNING YOUR ICE MAKER OFF

To stop the ice maker, lift the wire signal arm until it clicks and locks in the

"up" or OFF position. The ice maker also turns off automatically when the ice

container is full. If your model has an adjustable freezer shelf, place the shelf

in the lower position, so that the wire signal arm will hit the ice when the

container is full.

Ice Maker

ICE MAKER TIPS

• Ice cubes stored too long may develop an odd flavor. Empty the ice container and ensure that the wire signal arm is

in its "down" or ON position. The ice maker will then produce more ice.

• Occasionally shake the ice container to keep ice separated.

• Keep the wire signal arm in its "up" or OFF position until the refrigerator is connected to the water supply or whenever

the water supply is turned off.

• The following sounds are normal when the ice maker is operating:

• Motor running

• Ice loosening from tray

• Ice dropping into ice container

• Running water

• Water valve opening or closing

• Wash the ice container in warm water with mild detergent. Rinse well and dry.

• Stop the ice maker when cleaning the freezer and during vacations.

• If the ice maker will be turned off for a long period of time, turn the water supply valve to the closed position.

FOOD STORAGE IDEAS

Fresh Food Storage

• The fresh food compartment should be kept between 34° F and 40° F with an optimum temperature of 37° F

• Avoid overcrowding the refrigerator shelves This reduces the circulation of air around the food and results in uneven

cooling

Fruits and Vegetables

• Storage inthe crisper drawers traps moisture to help preserve the fruit and vegetable quality for longer time periods

Meat

• Raw meat and poultry should be wrapped securely so leakage and contamination of other foods or surfaces does not

Occur.

Frozen Food Storage

• The freezer compartment should be kept at 0° F or lower

• A freezer operates most efficiently when it is at least 2/3 full

Packaging Foods for Freezing

• To minimize dehydration and quality deterioration, use aluminum foil, freezer wrap, freezer bags or airtight containers

Force as much air out of the packages as possible and seal them tightly Trapped air can cause food to dry out,

change color, and develop an off-flavor (freezer burn)

• Wrap fresh meats and poultry with suitable freezer wrap prior to freezing

• Do not refreeze meat that has completely thawed

Loading the Freezer

• Avoid adding too much warm food to the freezer at one time This overloads the freezer, slows the rate of freezing,

and can raise the temperature of frozen foods

• Leave a space between the packages, so cold air can circulate freely, allowing food to freeze as quickly as possible

• Avoid storing hard-to-freeze foods such as ice cream and orange juice on the freezer door shelves These foods are

best stored in the freezer interior where the temperature varies less

ENERGY SAVING IDEAS

• Locate the refrigerator inthe coolest part of the room, out ofdirect sunlight,

and away from heating ducts or registers Do not place the refrigerator

next to heat-producing appliances such as a range, oven, or dishwasher

Ifthis is not possible, a section of cabinetry or an added layer of insulation

between the two appliances will help the refrigerator operate more

efficiently

• Level the refrigerator so that the doors close tightly

• Refer to this Use & Care Manual for the suggested temperature control

settings

• Periodic cleaning of the condenser will help the refrigerator run more

efficiently See the Care and Cleaning Chart on page 18

• Do not overcrowd the refrigerator or block cold air vents Doing so causes

the refrigerator to run longer and use more energy

• Cover foods and wipe containers dry before placing them in the

refrigerator This cuts down on moisture build-up inside the unit

• Organize the refrigerator to reduce door openings Remove as many

items as needed at one time and close the door as soon as possible

UNDERSTANDING THE SOUNDS YOU MAY HEAR

Your new high-efficiency refrigerator may make unfamiliar

sounds. Don't be alarmed, these are all normal sounds. Hard

surfaces, such as vinyl or wood floors, walls, and kitchen

cabinets may make sounds more noticeable. Listed below

are descriptions of some of the most common sounds you

may hear, and what is causing them.

A. Evaporator

The flow of refrigerant through the evaporator may

create a boiling or gurgling sound.

B. Evaporator Fan

You may hear air being forced through the refrigerator

by the evaporator fan.

C. Defrost Heater

During defrost cycles, water dripping onto the defrost

heater may cause a hissing or sizzling sound. After

defrosting, a popping sound may occur.

D. Automatic Ice Maker

If your refrigerator is equipped with an automatic ice

maker, you will hear ice cubes falling into the ice bin.

E. Cold Control & Defrost Timer

These parts can produce a snapping or clicking sound

when turning the refrigerator on and off. The timer also

produces sounds similar to an electric clock.

F. Condenser Fan

If condenser coils are located underneath your

refrigerator as shown in the drawing at the left, you

have a condenser fan. You may hear air being forced

through the condenser by the condenser fan.

G. Compressor

Modern, high-efficiency compressors operate much

faster than older models. The compressor may have a

high-pitched hum or pulsating sound.

H. Water Valve

If your refrigerator is equipped with an automatic ice

maker, you will hear a buzzing sound as the water valve

opens to fill the ice maker during each cycle.

I. Drain Pan (Nonremovable)

You may hear water running into the drain pan during

the defrost cycle. The drain pan will be located on top

of the compressor for air-cooled condensers (black coils

on back of refrigerator).

J. Condenser Coils (Fan-cooled models only)

Keepyourrefrigeratorandfreezercleantopreventodorbuild-up.Wipeupanyspillsimmediatelyandcleanbothsectionsat

leasttwiceayear.Neverusemetallicscouringpads,brushes,abrasivecleanersorstrongalkalinesolutionsonany

surface.Donotwashanyremovablepartsinadishwasher.Always unplug the electrical power cord from the wall

outlet before cleaning.

Care & Cleaning Chart

Part What To Use Tips and Precautions

Interior/Door • Soap and water Use 2 tablespoonsof baking soda in 1 quart ofwarm water. Be sure to wring

excess water out of sponge or cloth before cleaning around controls,

Liner • Bakingsoda and water light bulb or any electrical part.

Door Gaskets • Soap and water Wipe gaskets with a clean soft cloth.

Drawers/Bins • Soap and water Do not wash any removable items (bins,drawers, etc.) in dishwasher.

Glass Shelves • Soap and water Allow glass to warm to room temperature before immersingin warm water.

• Glass cleaner

• Mild liquid sprays

Toe Grille • Soap and water Vacuum dust from front of toe grille. Remove toe grille (See illustration on

• Mild liquid sprays page 4). Vacuum backside and wipe with sudsy cloth or sponge. Rinse and

• Vacuum attachment dry.

Exterior and • Soap and water Do not use commercial household cleaners, ammonia, or alcohol to clean

Handles handles.

Exterior and

Handles

(Stainless Steel

Models Only)

• Soap and water

• Ammonia

• Stainless Steel Cleaners

Condenser • Condenser Cleaning

Coils Brush is available from

(Fan-cooled your dealer.

models only) • Vacuum Cleaner

Condenser

Coils • Vacuum Cleaner Use the dusting tool attachment on your vacuum to remove dust build-up on

(Air-cooled the condenser coils (black tubes and wires) attached to the back of air-cooled

models only) refrigerators only.

Defrost Water • Soap and water Some models have defrost water pan located on top of compressor at bottom

Pan rear of refrigerator (see illustration on next page). Wipe water pan with damp

cloth. NOTE: The defrost water pan is NOT removable.

Clean stainless steel front and handles with non-abrasive soapy water and a

dishcloth. Rinse with clean water and a soft cloth. Wipe stubborn spots with an

ammonia-soaked paper towel, and rinse. Use a non-abrasive stainless steel

cleaner. These cleaners can be purchased at most home improvement or

major department stores. Always follow manufacturer's instructions.

NOTE: Always clean, wipe and dry with the grain to prevent cross-grain

scratching. Wash the rest of the cabinet with warm water and mild liquid

detergent. Rinse well, and wipe dry with a clean soft cloth.

No need to clean unless operating refrigerator under particularly dusty or

greasy conditions, or if there is significant pet traffic in your home. If cleaning

is necessary, remove toe grille and use extended vacuum attachment and

condenser cleaning brush to remove dust build-up from condenser coils (see

item "J" in illustration on page 17 for location).

NEVER CLEAN CONDENSER (SOME MODELS)

Ifyour refrigerator is equipped with a Never Clean condenser,

there's no needto cleanthe condenser under normal operating

conditions. If the refrigerator is operated under particularly

dusty or greasy conditions, or if there is significant pet traffic

in your home, it may be necessary to periodically clean the

condenser for maximum efficiency.

Defrost Water Pan (some models)

REPLACING THE FREEZER LIGHT BULB

(SOME MODELS)

1. Unplug refrigerator.

2. Wear gloves as protection against possible broken

glass.

3. Unsnap light shield as shown.

4. Unscrew and replace old bulb with an appliance bulb

of the same wattage.

5. Replace light shield.

6. Remember to plug the refrigerator back in.

Vacation and Moving Tips

Short

Vacations

Long

Vacations

Moving

Leave refrigerator operating during vacations of 3 weeks or less.

Use all perishable items from refrigerator compartment.

Turn automatic ice maker off, even if you will only be gone for a few days.

Remove all food and ice if you will be gone one month or more.

Turn controls to "0" and disconnect power.

Turn off automatic ice maker and turn water supply valve to closed position.

Clean interior thoroughly.

Leave both doors open to prevent odors and mold build-up. Block doors open if

necessary.

• Remove all food and ice.

• If using handcart, load from side.

• Adjust rollers all the way up to protect them during sliding or moving.

• Pad cabinet to avoid scratching surface.

REFRIGERATOR WARRANTY

Your refrigerator is protected by this warranty

WARRANTY THROUGH OUR AUTHORIZED SERVICERS,

PERIOD WEWILL:

FULL ONE-YEAR

WARRANTY

LIMITED 2"%5 TM

YEAR WARRANTY

(Cabinet Liner and

Sealed System)

One year from original

purchase date

Second through fifth

years from original

purchase date

Time periodslisted

above.

LIMITED

WARRANTY

(Applicable to the

State of Alaska)

Pay all costs for repairing or replacing any parts of this

appliance which prove to be defective in materials or

workmanship. Excludes original and replacement Ice

& Water filter cartridges (if equipped). Original and

replacement cartridges are warranted for 30 days

(parts only).

Repair or replace any parts in the cabinet liner or

Sealed Refrigeration System (compressor, condenser,

evaporator, drier and tubing) which prove to be

defective in materials or workmanship.

All of the provisions of the full warranties above and

the exclusions listed below apply.

THE CONSUMER WILL BE RESPONSIBLE FOR:

Costs of service calls that are listed under NORMAL

RESPONSIBILITIES OF THE CONSUMER. *

Costs for pick up and delivery of the appliance required because

of service, Costs for labor, parts and transportation other than

with respect to the cabinet liner or Sealed Refrigeration System,

Costs of the technician's travel to the home and any costs for

pick up and delivery of the appliance required because of

service.

In the U.S.A., your appliance is warranted by Electrolux Home Products North America, a division of White Consolidated Industries Inc. We

authorize no person to change or add to any of our obligations under this warranty. Our obligations for service and parts under this warranty must

be performed by us or an authorized Electrolux Home Products North America servicer. In Canada, your appliance is warranted by WCI Canada Inc.

*NORMAL

RESPONSIBILITIES

OFTHECONSUMER

EXCLUSIONS

IFYOU NEED

SERVICE

This warranty applies only to products in ordinary household use, and the consumer is responsible for the

items listed below:

1. Proper use of the appliance in accordance with instructions provided with the product.

2. Proper installation by an authorized servicer in accordance with instructions provided with the appliance and in

accordance with all local plumbing, electrical and/or gas codes.

3. Proper connection to a grounded power supply of sufficient voltage, replacement of blown fuses, repair of loose

connections or defects in house wiring.

4. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves,etc.,

which are not a part of the appliance when it was shipped from the factory.

5. Damages to finish after installation.

6. Replacement of light bulbs and/or fluorescent tubes (on models with these features).

This warranty does not cover the following:

1. CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL

EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY.

NOTE: Some states do not allow the exclusion or limitation of incidental or consequential damages, so this

limitation or exclusion may not apply to you.

2. Service calls which do not involve malfunction or defects in workmanship or material, or for appliances not in

ordinary household use. The consumer shall pay for such service calls.

3. Damages caused by services performed by servicers other than Electrolux Home Products North America or

its authorized servicers; use of parts other than genuine Electrolux Home Products parts; obtained from persons

other than such servicers; or external causes such as abuse, misuse, inadequate power supply or acts of God.

4. Products with original serial numbers that have been removed or altered and cannot be readily determined.

Keep your bill of sale, delivery slip, or some other appropriate payment record. The date on the bill establishes the

warranty period should service be required. If service is performed, it is in your best interest to obtain and keep all

receipts. This written warranty gives you specific legal rights. You may also have other rights that vary from state to

state. Service under this warranty must be obtained by contacting Electrolux Home Products:

This warranty only applies in the 50 states of the U.S.A., Puerto Rico, and Canada. Product features or specifications as described or illustrated

are subject to change without notice. All warranties are made by Electrolux Home Products North America, a division of White Consolidated

Industries Inc. In Canada, your appliance is warranted by WCI Canada Inc.

01-U-RE-02 (Rev. 12/2000)

USA

800°944°9044

Electrolux Home Products North America

P.O. Box 212378

Augusta, GA 30917

Canada

866o213°9397

Electrolux Home Products North America

6150 McLaughlin Road

Mississauga, Ontario

L5R 4C2

+ 44 hidden pages