25 & 50 CR series countertop with RIDE® model Chewblet® ice machine
SensorSAFE™ infrared dispense (optional)
Ice and water dispensers, 115V/60 Hz
Ice
storage
capacity Dispense
25 lb
(11.4 kg)
50 lb
(22.7 kg)
Ice production
Temperatures
air/water
Air-cooled 425 lb (193.0 kg) 325 lb (147.6 kg)
Water-cooled 486 lb (220.6 kg) 408 lb (185.2 kg)
Energy
consumption
per 100 lb
(45.4 kg) ice
Condenser
water
consumption
Water
consumption
Lever
SensorSAFE
Lever
SensorSAFE
70/50 F (21/10 C) 90/70 F (32/21 C)
N/A 6.3 kWh air-cooled
N/A 0.5 gpm (1.9 Lpm) at
12.0 gal (45.4 L) of potable water per 100 lb
(45.4 kg) of ice
Ice
machine
cooling Item number
air
water
air
water
air
water
air
water
25CR425A-L
25CR425W-L
25CR425A-S
25CR425W-S
50CR425A-L
50CR425W-L
50CR425A-S
50CR425W-S
4.3 kWh water-cooled
70 F (21 C) water
™
Symphony Plus
ice and water dispenser
Features
25 or 50 lb (11.4 or 22.7 kg) ice storage capacity
Maestro Plus™ Chewblet ice machine with up to
425lb(193.0 kg) dailyproduction of popular Chewblet ice
- automatically transport ice through a tube with RIDE
technology from up to 20' (6.1 m) away
- soft, chewable, compressed nugget ice is preferred over cubes1
and is ideal for patient care
- Quiet Night™ sleep mode turns o ice machine when idle
Designed with sanitation in mind
- automatic self-flushing of ice machine removes impurities
- drain cup provides internal air gap for added protection of
food zone components from drain linecontaminants
- Agion® silver-based antimicrobial provides protection of key ice
and water contact components
2
- one-hand lever or SensorSAFE infrared ice dispense
Reliable design, easy to service and clean
- cleaning and sanitizing of entire machine takes only1 hour
- LED control board provides at-a-glance machine status
- panels are easily removed for accessibility to all components
- ice machine parts are common across all
Symphony Plus dispensers
- stainless steel evaporator and auger deliver long life
Environmentally responsible
- meets Consortium for Energy Eciency Tier 2 specifications
- R404a refrigerant has zero ozonedepletion potential
- continuous ice making process uses less electricity and water
Durable, attractive dispenser
- frame and exterior cabinet are stainless steel with accent trim
- poly drain pan, grille and dispenser lid are corrosion-resistant
- secured top lid
Easy installation and industry’s best warranty
- comes in two boxes – ice machine and dispenser
- warranty – 3 years parts and labor, 5 years compressorparts
Accessories
Base stand with or without factory installed water filter (refer to form# 7010)
Pressurized water sanitizing kits (refer to form# 6830)
Chilled water option (item# 01065168)
SafeCLEAN
(item# 00132001)
Nu-Calgon® IMS-II sanitizer, 16 oz bottle (item# 00979674)
Additional filters (refer to form#6380, # 9905, # 6070)
Additional Symphony Plus accessories (refer to price list)
™
environmentally responsible ice machine cleaner
Job
Item
801 Church Lane | Easton, PA 18040, USA
1.800.523.9361 | 1.610.252.7301 | follettice.com
Specification
Ice storage capacity 25 Series – 25 lb (11.4 kg),
50 Series – 50 lb (22.7 kg)
W1 Width, dispenser 21.00" (53.3 cm)
D1 Depth, dispenser 23.50" (59.69 cm)
D2 Depth, drain pan 7.00" (17.78 cm)
H1 Height, dispenser 25 Series – 29.62" (75.2 cm),
50 Series – 33.62" (85.4 cm)
H2 Dispense height clearance 7.73" (19.63 cm)
Utility connection location back or bottom
C1 115 V/60/1
dispenser electrical
C2 Potable water inlet, dispenser 3/8" FPT internal connection–
C3 Drain, dispenser 3/4" MPT
Service clearance 12.00" (30.5 cm) top of ice machine
W2 Width, ice machine 18.88" (48.0 cm)
D3 Depth, ice machine 20.75" (52.7 cm) (air-cooled
H3 Height, ice machine 17.25" (43.8 cm)
Ventilation clearance air-cooled models only –
C4115 V/60/1
ice machine electrical
C5 Potable water inlet, ice machine
and dispenser
C6 Drain, ice machine 3/4" MPT
C7 Ice transport tube see form# 6695 for details
Water-cooled ice machine
connections
C8 Condenser inlet
C9 Condenser drain
Air temperature 50 -100 F (10 - 38 C)
Water temperature 45 - 90 F (7 - 32 C)
Potable water pressure 10 - 70 psi (69 - 483 kpa)
Condenser water pressure 10 - 125 psi (69-861 kpa)
Heat rejection air-cooled models – 5000 BTU/hr,
Water flow requirement for
water-cooled models
Approximate ship weight 310 lb (141 kg) (two boxes)
NOTE: For indoor use only
SHORT FORM SPECIFICATION:
load in countertop configuration, with ___ 25 lb (11.4 kg) or ___ 50lb (22.7 kg) of
storage. Environmentally responsible R404a ice machine (choose one) ___ air- or
___ water-cooled and to be removable for cleaning and maintenance. Dispenser
frame and cabinet stainless steel with plastic trim. Ice machine to produce
approximately 425 lb (193.0 kg) of Chewblet compressed nugget ice at air temp.
of 70F (21 C), water temp. of 50 F (10C). Ice machine equipped with automatic
self-flushing and Quiet Night sleep mode. Dispensers with RIDE ice machines
equipped with 10'(3 m) of insulated ice transport tube, 2.00"(5.08cm) air duct for
ice machine (air-cooled only). Storage area insulated with non-CFC, high density,
foamed-in-place polyurethane. 7'(2.1m) cord and NEMA 5-15 90º hospital-grade
plug provided. NSF and ETL listed.
25/50 CR series countertop
4amps
1.50"(3.81 cm) knockout provided
and dispenser
undercounter installations –
add1.50 (3.81cm) for shroud)
6.00"(15.24cm)right side of
icemachine
11 amps, 0.8 kW
7' (2.1 m) cord, NEMA 5-15 90º
hospital-grade plug
3/8" FPT
3/8" FPT
3/8" FPT
water-cooled models – 1400 BTU/hr
to air, 3600 BTU/hr to water
0.25 gpm at 50 F
0.5 gpm at 70 F
1.25 gpm at 90 F
Ice and water dispenser to be Follett® automatic
Dimensional drawing
D1
H1
C7
5.81"
(14.75 cm)
8.75" (22.23 cm)
10.50" (26.7 cm)
14.72" (37.4 cm)
Front view — air-cooled models
W2
H3
C6
2.50" (6.35 cm)
Front view — water-cooled models
W2
H3
10.62" (26.97 cm)
See dispenser detail sheet, form# 6675, for counter cut outs.
See form# 6695 for complete ice machine specifications.
1 Independent third party studies. Contact Follett for details.
2 Disclaimer: Antimicrobial protection is limited to the treated components and does not treat water or ice.
Agion is a registered trademark of Sciessent LLC.
Calgon is a licensed tradename distributed by Nu-Calgon, in the United States.
Maestro Plus, Symphony Plus, SensorSAFE, SafeCLEAN and Quiet Night are trademarks of FollettCorporation.
Chewblet, RIDE and Follett are registered trademarks of Follett Corporation, registered in the US.
Follett reserves the right to change specifications at any time without obligation. Certifications may
vary depending on country of origin.
C8 C9
C6
W1
D2
W2
access panel
C2
C3
C5
2.25" (5.72 cm)
C5
(5.72 cm)
2.50" (6.35 cm)
8.25" (20.96 cm)
H2
D3
H3
C1
0.80"
(2.03 cm)
C4
4.75" (12.07 cm)
C4
2.25"
4.75"
(12.07 cm)
5.25"
(13.34 cm)
Form #6640 10/15
© Follett Corporation
801 Church Lane | Easton, PA 18040, USA
1.800.523.9361 | 1.610.252.7301 | follettice.com