Each Fluke product is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is three
years and begins on the date of shipment. Parts, product repairs, and services are warranted for 90 days. This warranty extends only to the
original buyer or end-user customer of a Fluke authorized reseller, and does not apply to fuses, disposable batteries, or to any product which, in
Fluke's opinion, has been misused, altered, neglected, contaminated, or damaged by accident or abnormal conditions of operation or handling.
Fluke warrants that software will operate substantially in accordance with its functional specifications for 90 days and that it has been properly
recorded on non-defective media. Fluke does not warrant that software will be error free or operate without interruption.
Fluke authorized resellers shall extend this warranty on new and unused products to end-user customers only but have no authority to extend a
greater or different warranty on behalf of Fluke. Warranty support is available only if product is purchased through a Fluke authorized sales outlet
or Buyer has paid the applicable international price. Fluke reserves the right to invoice Buyer for importation costs of repair/replacement parts
when product purchased in one country is submitted for repair in another country.
Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase price, free of charge repair, or replacement of a defective product
which is returned to a Fluke authorized service center within the warranty period.
To obtain warranty service, contact your nearest Fluke authorized service center to obtain return authorization information, then send the product
to that service center, with a description of the difficulty, postage and insurance prepaid (FOB Destination). Fluke assumes no risk for damage in
transit. Following warranty repair, the product will be returned to Buyer, transportation prepaid (FOB Destination). If Fluke determines that failure
was caused by neglect, misuse, contamination, alteration, accident, or abnormal condition of operation or handling, including overvoltage failures
caused by use outside the product’s specified rating, or normal wear and tear of mechanical components, Fluke will provide an estimate of repair
costs and obtain authorization before commencing the work. Following repair, the product will be returned to the Buyer transportation prepaid and
the Buyer will be billed for the repair and return transportation charges (FOB Shipping Point).
THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING
LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY.
Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or limitation of incidental or consequential
damages, the limitations and exclusions of this warranty may not apply to every buyer. If any provision of this Warranty is held invalid or
unenforceable by a court or other decision-maker of competent jurisdiction, such holding will not affect the validity or enforceability of any other
provision.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
11/99
Fluke Europe B. V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
The Fluke 377, 377 FC, 378, and 378 FC Current Clamp (the
Clamp or Product) provides:
•display with two simultaneous measurements (current and
voltage)
•grounding with a single lead
•live measurements with no circuit downtime
•non-contact voltage measurement with Power Quality
Indicator
•wireless connectivity to smartphone for work-orders and
reporting integration with Fluke Connect™ app
Table 1. Features by Model
Model377378377 FC378 FC
The Clamp measures true-rms ac current and voltage, dc current
and voltage, inrush current, resistance, capacitance, frequency,
and dc millivolts.
The included iFlex (detachable, flexible current-probe) expands
the measurement range to 2500 A ac. The iFlex allows
measurements of awkward sized conductors and improved wire
access.
The illustrations in this manual show the 378 FC.
Table 1 is a list of features available for each model.
BLE for Fluke Connect™ App
Power Quality Indicator
Phase Rotation
Sequential phase: non-contact voltage
measurement
Phase-to-phase voltage calculation
True RMS
Logging
••
••
Fluke Connect App OnlyFluke Connect App Only
••••
••••
••••
••
1
377/377 FC/378/378 FC
Users Manual
Contact Fluke
Fluke Corporation operates worldwide. For local contact
information, go to our website: www.fluke.com.
To register your product, view, print, or download the latest manual
or manual supplement, go to our website.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
+1-425-446-5500
fluke-info@fluke.com
Safety Information
General safety information is in the printed Safety Information
document that ships with the Product and at www.fluke.com. More
specific safety information is listed where applicable.
Specifications
Complete specifications are at www.fluke.com. See the
377/377 FC / 378/378 FC Product Specifications.
2
Before You Start
Table 2 is a list of items included with the Product. Use Table 3 to
order additional accessories.
Table 2. Standard Equipment
Clamp Meter
Before You Start
1
2
ItemModel NumberDescription
variesClamp Meter
i2500-18 iFlexFlexible Current Probe 18 in (48 cm)
TPAKHanging Kit
AC285Alligator Clip (black)
TL224Insulated Test Lead Set
TP175Test Probe Set
4
3
5
6
7
37xCarry Case
3
Loading...
+ 15 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.