Fisher Paykel OR30SCG4W1 Planning guide
in
min 35 3/4''
max 37 5/8'
29 7/8''
27 1/4"
25 1/4''
24 15/16"
1 1/4"
3''
7/8''
1 1/4"
2"
31 13/16"
5 3/4"
25 1/4"
5 15/16"
22 7/16"
13/16''
29 11/16"
2 1/8"
16 7/16"
min 3 5/8"
max 5 1/2"
2 1/16"
2 3/16"
29 13/16"
in
min 30''
25 1/4''
min 35 3/4''
max 37 5/8''
B
29 7/8"
j
DATUM : FRONT EDGE OF SIDE PANEL
q
s
v
PLAN VIEW
B
29 7/8"
f
DATUM : TOP OF COUNTERTOP
l
SUGGESTED ALIGNMENT
i
p
c
27 1/4"
d
OPTIONAL BACKGUARD
NOT TO SCALEOPTIONAL TOE KICK PANEL
Model no:
OR30SCG4X1, OR30SCG4B1, OR30SCG4W1, OR30SCG4R1
(refer page 4 for metric measurements)
Product Dimensions
a Overall height of range (from floor to cooktop, excluding pan
supports)
B Overall width of range
c Overall depth of range including handle and dials
d Depth from front of range to rear (excl. handle and dials)
e Depth from rear of chassis to front of side panel
f Height from top of cooktop to top of pan supports
g Height from top of cooktop to top of optional backguard
h Height from top of cooktop to top of rear trim
i Height of cooktop front face (excl. chamfer)
j Depth of rear trim / optional backguard
k Height from countertop to bottom of chassis
l Height from countertop to bottom of control panel
m Height from top of door to bottom of chassis
n Height from top of warmer drawer to bottom of chassis
o Height from handle to bottom of chassis
p Thickness of handle rail (not including standoffs)
g
h
q Width of handle (including standoffs)
r Depth of handle (measured from front of door)
s Depth of open door to front of side panel
t Adjustable feet height
30" Classic Freestanding Range Gas
DATA SHEET
k
m
o
0 5 10 20
ELECTRIC CORD ANTI-TIP BRACKET
FRONT VIEW
inches
n
A
35 3/4'' 37 5/8''
r
t
s
DATUM : FRONT EDGE OF SIDE PANEL
u
e
PROFILE VIEW
DATUM :
BOTTOM OF CHASSIS
u Toekick depth - with optional toe kick panel
- without toe kick panel
v Width of optional toe kick panel
Cavity Dimensions
Overall width of cavity
Overall depth of cavity
Overall height of cavity
IMPORTANT NOTE: For full installation and clearance details please refer to
our installation manual.
INDICATES CAVITY CLEARANCES ---------------
INDICATES PRODUCT DATUM --------------------
DATE: 12.03.2019
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
30" Classic Freestanding Range Gas
in
30''
18''
11 13/16''
36''
30''
30''
13''
8 7/8"
DATA SHEET
C
F
MINIMUM CLEARANCE:
C
LEFT AND RIGHT OF RANGE
TO NEAREST VERTICAL
COMBUSTIBLE SURFACE
Model no:
OR30SCG4X1, OR30SCG4B1, OR30SCG4W1, OR30SCG4R1
(refer page 5 for metric measurements)
Clearance Dimensions
a Minimum width of ventilation hood installed above range
- not shown*
B Minimum vertical distance between countertop and cabinet
extending above counter
c Minimum clearance from left and right of range to nearest
vertical combustible surface
d Minimum clearance from cooking surface to:
- overhead cabinet centered above the cooktop
(combustible / unprotected)
- overhead cabinet centered above the cooktop
(non-combustible / protected)
- ventilation hood centered above the cooktop
e Maximum overall depth of overhead cabinetry
f Distance from center of rear burner to rear of product
*IMPORTANT NOTE: For full installation and clearance details please refer to
our installation manual.
PLAN VIEW
FRONT OF SIDE PANEL
DATUM :
TOP OF COUNTERTOP
MINIMUM CLEARANCE:
D
COMBUSTIBLE SURFACE
MINIMUM CLEARANCE:
D
NON-COMBUSTIBLE SURFACE
MAXIMUM OVERALL DEPTH
E
OF OVERHEAD CABINETRY
MINIMUM CLEARANCE:
B
ADJACENT OVERHEAD CABINET
FRONT OF SIDE PANEL
0 5 10 20
FRONT VIEW
inches
DATUM : BOTTOM OF CHASSIS
PROFILE VIEW
INDICATES CLEARANCES ---------------
INDICATES PRODUCT DATUM --------------------
DATE: 12.03.2019
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
Loading...