Fairbanks 1155 User Manual
© 2013
Instruction Manual
Portable Utility Scale
1155 SERIES SCALE
WITH THE
FB2255 INSTRUMENT
All rights reserved
Rev. 1 02/13
51315
AMENDMENT RECORD
Portable Utility Scal e
Model 1155
With FB2255 Instrument
Document 51315
Manufactured by Fairbanks Scales Inc.
821 Locust
Kansas City, Missouri 64106
Created 02/13
Revision 1 02/13 Released new product
02/13 3 51315 Rev. 1
Disclaimer
Every effort has bee n made to provide com plete and accurate inform ation in this manual. However,
although this manual m ay include a specifically identi fied warranty notice for the produc t, Fairbanks
Scales makes no representations or warranties with respect to the contents of this manual, and
reserves the right to make changes to this manual without notice when and as improvements are
made.
It is the responsibility of the requesting party to develop, maintain, install, and connect networking
devices and general net work connect ivity as it applies to the originatin g party’s network . No warranty
or guarantee, expressed or implied, concerning the network , its design, its installation, or operational
characteristics has been offered by Fairbanks Scales. Fairbanks Scales shall not be liable for any
loss, damage, cost of r epairs, incide ntal or consequ ential dam ages of an y kind, whether or n ot based
on express or implied warranty, contract, negligence, or strict liability arising in connection with the
design, development, installation, or use of an intended network.
© Copyright 2013
This document contains proprietary information protected by copyright. All rights are reserved; no part
of this manual may be reproduced, copied, translated or transmitted in any form or by any means
without prior written permission of the manufacturer.
02/13 4 51315 Rev. 1
Table of Contents
SECTION 1: GENERAL INFORMATION .................................................................. 7
1.1. Introduction .............................................................................................................. 7
1.2. AC Power Settings .................................................................................................. 8
1.3. DC Power ................................................................................................................ 9
1.4. Specifications ........................................................................................................ 10
1.4.1. Instrument Approvals ...................................................................................................... 10
1.4.2. Basic Specifications ........................................................................................................ 10
1.4.3. Standard Settings ........................................................................................................... 10
1.4.4. Weight Accumulator ........................................................................................................ 10
1.4.5. Outputs ........................................................................................................................... 11
1.4.6. PC2255 ........................................................................................................................... 11
1.4.7. Power Requirements ...................................................................................................... 11
1.4.8. Out of Range Warnings .................................................................................................. 11
1.4.9. Environment .................................................................................................................... 11
SECTION 2: ASSEMBLY ......................................................................................... 12
2.1. Necessary Tools .................................................................................................... 12
2.2 Wheel & Pillar Assembly ........................................................................................ 12
2.3. Mounting Bracket Kit Assembly ............................................................................. 13
2.4. Loadcell Connections ............................................................................................ 15
2.5. Instrument Wiring .................................................................................................. 16
2.5.1. JP3 Jumper Configuration) ............................................................................................. 17
2.5.2. TB2 Load Cell ................................................................................................................. 18
2.5.3. TB3 Wiring connections, AC Input .................................................................................. 18
2.5.4. TB4 Wiring connections, COM1 (A), COM2 (B), and COM2 (C).................................... 18
2.5.5. TB5 Remote Switch Inputs ............................................................................................. 19
2.5.6. Remote Display Active Keys .......................................................................................... 19
2.6. Installing the instrument ......................................................................................... 20
2.7. Battery Installation ................................................................................................. 21
SECTION 3: PROGRAMMING ................................................................................. 22
3.1. Powering On and OFf the FB2255 ......................................................................... 22
3.2. Entering Program Mode ......................................................................................... 22
3.3. Setup Menu Programming Parameters .................................................................. 22
3.3.1. Setting and Programming Time ...................................................................................... 23
3.3.2. Programming the Date .................................................................................................... 23
SECTION 4: USER OPERATIONS .......................................................................... 24
4.1. Front Panel Key Functions .................................................................................... 24
4.2. Operating Procedures ........................................................................................... 25
4.3. Gross, Tare and Net Weight .................................................................................. 25
4.4. Basic Weighing ................................
4.5. Gross Weighing ..................................................................................................... 26
4.6. Net Weighing ......................................................................................................... 26
4.7. Gross/Tare/Net Weighing ...................................................................................... 27
...................................................................... 26
02/13 5 51315 Rev. 1
Table of Cont ents
SECTION 5: PARTS ................................................................................................. 28
5.1. FB2255 Instrument Assembly ................................................................................ 28
5.1.1. Parts List ......................................................................................................................... 28
5.1.2. Parts Diagram ................................................................................................................. 29
5.2. Pillar Assembly ...................................................................................................... 30
5.2.1. Parts List ......................................................................................................................... 30
5.2.2. Parts Diagram ................................................................................................................. 31
02/13 6 51315 Rev. 1
185 pounds
WARNING!
Section 1: General Information
1.1. INTRODUCTION
The 1155 Series Scale is a combination of a roll-around cast iron base and a
battery/AC powered digital indicator. NTEP and MC approved for “Legal for Trade”
applications.
APPLICATIONS
Material handling Inventory management
Warehousing
The 1155 Portable Platform Scale Base is
constructed of cast iron with cast iron levers.
Auditing
Parts distribution
Bag filling
• The weight display is an AC/Battery
powered FB2255 Series Indicator.
• It is equipped with communication ports
for connecting printers, displays, and/or
computers.
• The scale is rated at 1000 pounds
capacity.
• The interval, or graduation size is 0.2
pounds.
Although the unit is factory calibrated, some
assembly is required.
The 1155's shipping weight is approximately
Use caution to prevent personal injury and/or damage to the product when
lifting or moving it.
02/13 7 51315 Rev. 1
.
Section 1: General Information
non-use, remove them all from their holder.
1.1. INTRODUCTION, CONTINUED
NOTE: For commercial weighing applications, the scale must be 'placed-in-
service' by a licensed sc ale tec hni ci an .
For product solutions, please call FAIRBANKS SCALES TECHNICAL
SERVICES.
Power supply must be used with a correctly grounded outlet.
• Place the scale on a solid and level floor.
• Avoid extremes in temperature, humidity, shock, moisture and dust.
• The scale is factory calibrated and supplied ready to be assembled and used.
• The 1155 Series Scale must be serviced a by qualified technician.
─ Failure to do so may void all implied and/or written warranties.
• Ensure that no shipping damage has occ ur r e d to any of the equipment.
─ Damage to the shipping carton must be noted by the receiving party.
─ Damage must be made known to the shipper.
─ Claims for shipping damage are made by the receiving party to the shipper.
• It is the customer's/owner's responsibility to maintain the scale in good operating
condition, and to protect the scale from accidental damage.
ATTENTION!
DO NOT pack or ship an instrument with bat teries installed.
If batteries are expected to be left for an extended period of
02/13 8 51315 Rev. 1
Section 1: General Information
OFF
or equivalent.
CAUTION
This product is shipped from the factory set for 110-120VAC operation.
1.2. AC POWER SETTINGS
110VAC
The FB2255 is designed to operate from 80 to 260 volts AC, 50 to 60 HZ.
─ 110 VAC operations.
─ The Instrument is factory wired for 110 VAC and requires a three prong
grounded outlet.
220 VAC
The FB2255 has AUTO SWITCHING capabilities.
─ Rewire the power Cord according to the diagram.
1.3. DC POWER
Batteries
Battery Life
Internal Battery
Five (5) Size “D” Alkaline batteries @ 1.5 Volts DC each.
• Up to forty (40) Hours or greater with a maximum load of 4, 350
load cells and backlighting enabled.
• Battery usage time can be adversely affected by battery storage,
battery capacity and battery brand.
• To maximize battery life, Serial Ports 1 and 2 should be switched
if not used.
• Should be replaced every 12 months using Panasonic CR 1220 3V
For 220-240 VAC operation, settings must be changed before powering up.
02/13 9 51315 Rev. 1
Section 1: General Information
09-023
AM-5720
ETL Listed
60950-1
60950-1-03
Zero Range
Off, 2 % or 100%
OFF, 0.5, 1 or 3 divisions
0.2, 0.4, and 0.8 seconds
1.4. SPECIFICATIONS
1.4.1. INSTRUMENT APPROVALS
CC
MC
ETL
Conforms to ANSI/UL STD
Certified to CAN/CSA C22.2 STD NO.
1.4.2. BASIC SPECIFICATIONS
ENCLOSURE
DISPLAY
FRONT PANEL KEYS
UNITS
GRADUATION SIZE
AD CONVERSION
LOAD CELL EXCITATION
SENSITIVITY
LOAD CELLS
DISPLAYED DIVISIONS
CAPACITIES
ABS, Black NEMA 1
6-digits, One inch (1”) LCD, Green Backlight
On/Off, Units, Zero, B/G, Net, Tare and Print
lb, oz, kg, g and lb/oz, or custom
0.0001 to 50
66 per second
5 Volts DC
1µv/d (microvolt/division)
Eight (8) 350 ohm or Sixteen (16) 1000 ohm
10,000d Commercial and 100,000d Non-Commercial
Programmable to 999999
1.4.3. STANDARD SETTINGS
Auto Zero Tracking
Balance
Filter
Display Update Rate
OFF, 0.5, 1 or 3 divisions
Slow, Animal, Standard, and Fast
1.4.4. WEIGHT ACCUMULATOR
Capacity
02/13 10 51315 Rev. 1
999,999 Weight Units
– Printed or viewed.
Loading...