FAGOR XL0102DA Datasheet

XL0102DA

SENSITIVEGATESCR

TO92

(Plastic)

K

G A

On-State Current	Gate Trigger Current
0.8 Amp	< 200 µA

Off-State Voltage

400 V

This series of Silicon Controlled R ectifiers uses a high performance PNPN technology.

This part is intended for general purpose applications where high gate sensitivity is required.

AbsoluteMaximumRatings,accordingtoIECpublicationNo.134

SYMBOL	PARAMETER		CONDITIONS			Min.		Max.	Unit
IT(RMS)	On-state Current		All Conduction Angle, TL = 60 ºC			0.8			A
IT(AV)	Average On-state Current		Half Cycle, Θ = 180 º, TL = 60 ºC			0.5			A
ITSM	Non-repetitive On-State Current		Half Cycle, 60 Hz, Tj = 25 ºC			8			A
ITSM	Non-repetitive On-State Current		Half Cycle, 50 Hz, Tj = 25º C			7			A
I2t	Fusing Current		t = 10ms, Half Cycle			0.24			A2s
VGRM	Peak Reverse Gate Voltage		IGR = 10 µA			8			V
IGM	Peak Gate Current		20 µs max.					1	A
PGM	Peak Gate Dissipation		20 µs max.					2	W
PG(AV)	Gate Dissipation		20ms max.					0.1	W
Tj	Operating Temperature					-40		+125	ºC
Tstg	Storage Temperature					-40		+150	ºC
Tsld	Soldering Temperature		1.6 mm from case, 10s max.					260	ºC
SYMBOL	PARAMETER		CONDITIONS		VOLTAGE				Unit
						D
VDRM	Repetitive Peak Off State		RGK = 1 KΩ		400				V
	Voltage

Jan - 02