Optical digital connector Input level -24.0 dBm to -14.5 dBm peak
DSD (DoP)
1 (Type B)
USB port
DSD 2.8MHz, 5.6MHz, 11.2MHz, 22.5MHz
Clock output
BNC connector 1
Output level TTL level equivalent (into 75Ω)
Output frequencies
Output frequency precision ±0.5 ppm (when shipped from factory)
Clock input
BNC connector 1
Input impedance 50Ω
Frequencies that can be input
Input level TTL level equivalent
General
Power supply
Power consumption 25W
External dimensions
(W x H x D, including protrusions)
Weight 14.0 kg (30 7/8 lb)
Included accessories
- These products are made available in three different power supply variations, as shown in the chart above.
Make sure that the voltage shown on the rear panel matches the AC line voltage in your area.
- The shape of the AC inlet and plug of the supplied power cord depends on the voltage rating and destination country.
- Specifications and appearance are subject to change without notice.
- Weight and dimensions are approximate.
XLR 44Ω
XLR (
1 pair (L/R)
when set to 0 dB
)
RCA 2.5Vrms
Input signal format
Input signal format
(with Dual connection
Input signal format
(
with Single connection
Input signal format
Input signal format
Input signal format
) 5.0Vrms
5Hz to 65kHz(-3dB)
)
Linear PCM (ES-LINK4) 352.8/ 384kHz, 48-bit
88.2-384kHz, 16/24-bit Linear PCM (DUAL AES)
88.2-192kHz, 48-bit Linear PCM (ES-LINK3)
)
DSD (ES-LINK1, ES-LINK2, DoP)
32−192kHz, 16/24-bit Linear PCM (AES/EBU)
)
DSD (ES-LINK1, ES-LINK2, DoP)
32-192kHz, 16/24-bit Linear PCM (IEC60958)
32-192kHz, 16/24-bit Linear PCM (IEC60958)
44.1-768kHz, 16/24/32-bit, Linear PCM
44.1kHz, 88.2kHz, 176.4kHz, 48kHz, 96kHz, 192kHz
22.5792MHz, 24.576MHz
Same as input frequency (when set to through output)
A new milestone cultivated by 30 years of tradition
e lineage of high-end digital audio follows the evolutionary steps of ESOTERIC digital players.
is began with the rst generation P-1/D-1 model in 1987,
which made the revolutionary step of including a VRDS mechanism,
and was followed by models featuring the ultimate in engineering and craftsmanship,
such as the P-70/D-70 in 2001 and the P-03/D-03 in 2005.
In the year 2016 these models were succeeded by the superior P-02X/D02X.
And now three decades after the birth of the ESOTERIC brand, we have the P-05X/D-05X.
e P-05X/D-05X inherits the successful results of the P-02X/D-02X to give birth to
a new milestone in high-end audio which is suitable for the start of the next three decades.
LEADING TECHNOLOGY
In the Footsteps of ESOTERIC’s
Most Advanced Grandioso Technology
ES-LINK4
Both the P-05X and D-05X have been newly equipped with ESOTERIC's state-of-the-art ES-LINK4, which
provides high-accuracy digital transmission of both DSD and ultra-wideband 352.8kHz/48-bit PCM by way
of its HDMI cable connections. A core feature of the Grandioso P1/D1 digital source system, and
developed in line with ESOTERIC's ‘Pure D/A’ concept, ES-LINK4 performs the major portion of digital
signal processing on the transmission side to significantly reduce the processing load on the D/A converter
in pursuit of the ultimate in sound quality.
The Expressive Power of 34-bit D/A Processing
The D-05X utilizes a 34-bit D/A processing algorithm to convert the PCM signal to analog. This 34-bit
encoding provides an astounding level of digital resolution that is fully 1,024 times that of 24-bit encoding,
and quadruple that of the original D-05 model. Taking advantage of the delicate tone realized by this
high-bit data minimizes calculation errors for outstanding expression of even the most subtle musical
signals.
High-Precision VCXO Clock Technology
A high-precision custom VCXO (voltage controlled crystal oscillator) supplies a highly accurate reference
clock signal to the digital circuitry. Incorporating an unusually large crystal element, this custom VCXO
realizes both excellent center accuracy (±0.5ppm*) and extremely low levels of phase noise to ensure
exceptional sound playback quality. (*at time of shipping)
High-Accuracy Clock Synchronization
A BNC cable connects the D-05X to the P-05X to provide a master clock sync signal for synchronized
playback with minimized jitter. ESOTERIC's proprietary Direct Master Clock Link* synchronizes the two
units while eliminating the need for Phase-Locked Loop (PLL), enabling clear and accurate stereo imaging
and crisp sound quality. The system can be further upgraded with the addition of an optional
high-accuracy external Master Clock Generator and supports a wide range of frequencies including master
clocks (22MHz/10MHz) and word clocks (44.1kHz/88.2kHz/176.4kHz).
*DMCL (Direct Master Clock LINK)
DMCL links the D-05X to the P-05X with a 22.5792MHz reference clock signal that causes the two units to function as a
single integrated device. Compared to normal ‘sync’ systems, which generally require PLL (Phase Lock Loop)
processing of the transmitted clock signal, DMCL provides simpler and more direct clocking between multiple devices.
PROUDLY MADE IN TOKYO
34-bit Dual Mono D/A Converter
D-0 X
Super Audio CD Transport
P-0 X
Page 3
Super Audio CD Transport
P
-0 X
All major components updated from the original model to bring a new level of superiority
The P-05X is a brand new transport that brings together all the knowledge built up by ESOTERIC during the 10 years since the
original P-05 model was released, and almost all of its components have been updated from the original model. This model
includes the world-renowned VRDS-NEO VMK-5 drive mechanism and its digital circuit and clock circuit adopt technology
developed for the Grandioso P1 and P-02X. The luxurious power supply circuit with large toroidal transformers has been
enhanced to obtain even higher audio quality. Functionality has also been upgraded with support for ES-LINK4 digital
transmission. By following the same design principles as higher end models, the chassis of the P-05X has been made more rigid
and the exterior has evolved to emphasize an elegant round shape.
VRDS-NEO [VMK-5]
The unique VRDS-NEO VMK-5 transport mechanism featured in
this new transport incorporates high-precision turntable that
greatly improves reading accuracy by mechanically correcting for
disc surface run-out. It's hybrid construction integrates precisionmachined aluminum with polycarbonate to help minimize
rotational inertia.
Formed of high-rigidity BMC (Bulk Molding Compound) and steel,
the hybrid turntable bridge also makes a significant contribution to
the suppression of rotational vibration and run-out. The transports
spindle motor realizes further improvements in reading accuracy
with an advanced servo control that uses rotation detection
circuitry.
Mechanical operations such as opening and closing the tray and
clamping the disc are performed by a unique differential gear
system. This proprietary* Esoteric technology ensures exceptionally
smooth disc loading operation.
* Patent No.2861798 owned by TEAC Corporation.
Axial Sliding Pick-up Designed to
Prevent Optical Axis Tilting
The same axial sliding pick-up assembly,
used in the flagship model Grandioso P1,
is incorporated in the heart of the data
acquisition section. As the lens moves,
the laser optical axis is always positioned
in a vertical direction, ensuring a highly
accurate reading of the recorded material.
Elegantly Designed Robust Chassis
The exterior case is formed from thick
aluminum panels, and its steel bottom
plate is supported at three points on
ESOTERIC's exclusive pinpoint feet.
Vibration transmission has also been
effectively minimized by the high-precision
l
aser slot processing used in manufacture
of its rigid base.
ES-LINK4
The ES-LINK4 is ESOTERIC’s proprietary, super high speed, wide range,
and extremely pure LVDS (Low Voltage Differential Signaling) digital
interface. With this interface, most digital processing is done at the
transport side and the three elements of the audio signal (audio data, LR
clock, and bit clock signals) are separately transferred to the DAC in a
differential mode, by utilizing the multi-conductor structure of the HDMI
cable.Since the signal is already pre-processed at the transport side and
is transferred without bi-phase modulation, a digital de-coding/oversampling process is not required on the signal receiver side. The DAC is simply
dedicated to D to A processing and retrieves a purer analog signal from
transferred digital streams.
Pinpoint Feet
A Selection of Digital Outputs
The P-05X has a pair of new ES-LINK4 HDMI ports, dual XLR connectors
that maintain compatibility with earlier versions of ES-LINK, and a coaxial
digital output.
Organic EL Displays
Both units feature smooth-operating, low-consumption electroluminescent (EL) displays that are eminently suited to such state-of-the- art
components.
High-Quality Remote Control with a Luxurious Feel
The P-05X's RC-1301 Remote Controller is constructed from
a solid aluminum top panel. The brushed finish on its control
panel matches that of the unit's front panel and offers a
luxurious feel of the highest quality.
PROUDLY MADE IN TOKYO
Page 4
34-bit Dual Mono D/A Converter
D-0 X
A DAC following in the footsteps of the Grandioso D1, with uncompromising audio quality
The D-05X uncompromisingly inherits the DAC design philosophy of the Grandioso D1 flagship device and updates all the circuit
components from the original D-05 model to obtain sound quality that should be considered the standard for ultra-high end
devices. It includes a large capacitance power supply with two large toroidal transformers at the core for independent left and
right channels. The circuit size of the DAC has been doubled to have four differential circuits per channel. In terms of functionality,
the D-05X features ES-LINK4 digital transmission, 34-bit D/A processing, the well-received ESOTERIC-HCLD line buffer from the
Grandioso C1 preamp, and the unique ES-LINK Analog line transmission for high audio quality. It also supports playback at high
resolutions such as DSD 22.5 MHz to obtain even more outstanding audio playback overall.
D - 05X Block Diagram
Digital PCB
CLK OUT
●
CLK IN
●
ES-LINK L
ES-LINK R
XLR1 L
RCA1
OPTICAL
XLR2 R
USB-B
LVDS
Reciever
LVDS
Reciever
RS-422
Reciever
RS-422
Reciever
DSD22.5MHz
USB Audio I/F
USB PCB
DIR 1
DIR 2
PC/Digital
Isorator
PCM/DoP
Audio Data
Master Clock
PCM/DoP
Audio Data
Master Clock
PCM/DSD
Audio Data
Master Clock
PLL
FPGA
Audio Selector
ES-LINK1/2 Decoder
DoP Decoder
PCM Upconverter
(RDOT 2x/4x/8x)
PCMtoDSD Converter
( )
DSD22.5792MHz/
DSD24.576MHz
34bit Processing
VCXO
Digital/Analog
Isorator
PCM
DSD
Digital/Analog
Isorator
PCM
DSD
32bit 2ch
32bit2ch
DAC
DAC
32bit 2ch
32bit2ch
DAC
DAC
32bit 2ch
32bit2ch
DAC
DAC
32bit 2ch
32bit2ch
DAC
DAC
ES-LINK Analog
Line Out XLR
Line Out RCA
Lch Analog PCB
ES-LINK Analog
Line Out XLR
Line Out RCA
Rch Analog PCB
ESL-A
XLR
RCA
ESL-A
XLR
RCA
LPF
HCLD
LPF
LPF
HCLD
LPF
LPF
HCLD
LPF
LPF
HCLD
LPF
34-bit Resolution Accentuates the Most Delicate
Sound Textures
The D-05X uses 8 (4 + 4) DAC circuits to achieve its low-noise and
phenomenal linearity. Its AK4497 chipsets are produced by Asahi Kasei
Microdevices. In addition to directly processing DSD signals, a new 34-bit
D/A processing algorithm performs analog conversion of the PCM signal
at 34-bit resolution for smooth, delicately detailed high-resolution sound
quality.
34-bit D/A Processing
32bit
(PAT. JP6043052)
33bit
34bit
Image figure
Analog
ESOTERIC-HCLD*: ESOTERIC's Exclusive Output
Buffer Delivers Powerful Direct Current Transmission
The ability to produce comparatively large currents and high slew rates
are two of the most important factors that enable an analog output circuit
to accurately transmit the wide dynamic range of a music signal without
degradation. The D-05X offers the ultimate performance as a line driver
by adopting high-performance elements with a high current output and
exceptionally fast slew rate (2,000V/µs) for excellent response speed.
Two of these buffer circuits are employed per channel. By configuring
them differentially to drive the XLR outputs and in parallel to drive the RCA
outputs, the instantaneous output current available is maximized. By
maximizing instantaneous current output, the D-05X reproduces the full
dynamics of music with breathtaking realism.
*HCLD=High Current Line Driver
"ES-LINK Analog" Method for High Quality Current
Transmission
In addition to regular line connections (XLR and RCA), the D-05X features
the new "ES-LINK Analog" transmission method developed by ESOTERIC.
This is a current transmission signaling that utilizes the high performance
of the HCLD buffer circuit and its enhanced ability to supply current at
high-speed. This is the ideal analog audio transmission as it is free from
impedance of signal route, thus fully maximizes the system's potential
when connected to a compatible device.*
*Included in the Grandioso F1 as of March 2017. A standard balance cable (with an
XLR terminal) is used for connections, but the "ES-LINK Analog" method can only
be used with compatible devices since it is a proprietary transmission method.
Wide-Range D/D Conversion Compatible
with Many Sources
In addition to playback at a source's original sampling frequency, the
D-05X also features PCM up-conversion capability (2x, 4x, 8x) and
PCM-to-DSD conversion that uses a proprietary algorithm to convert the
PCM signal to fixed 22.5MHz DSD, enabling significantly smoother
musical reproduction.
Digital Inputs Support High Sampling Rates
The D-05X's coaxial and optical inputs support PCM signals up to
24-bit/192kHz and 2.8MHz DSD (DoP). Two XLR inputs support
48-bit/192kHz (ES-LINK3), 24-bit/384kHz (Dual AES 8Fs) and 5.6MHz
DSD (DoP Dual XLR mode).
USB Support for 22.5MHz DSD, 768kHz/32-bit PCM,
and Asynchronous Transmission
IThe D-05X includes a USB terminal for connecting to computers, and
the driver and "ESOTERIC HR Audio Player" playback software can be
downloaded from the ESOTERIC website free-of-charge. The D-05X
supports asynchronous transmission and playback at high sampling
rates up to 22.5 MHz DSD and 768 KHz/32-bit PCM studio-master-quality
source files.
Changeable XLR Output Pin Assignment
As phase can be digitally inverted in a contactless system, either Hot 2 or
Hot 3 can be selected with no deterioration in sound quality.
PROUDLY MADE IN TOKYO
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.