Epson S5U1C88000P User Manual

MF1434-01

CMOS 8-BIT SINGLE CHIP MICROCOMPUTER

S5U1C88000P

(S1C88 Family Peripheral Circuit Board)

Manual

NOTICE

No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko
Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any
liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or
circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such
as medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there
is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright
infringement of a third party. This material or portions thereof may contain technology or the subject relating to strategic
products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from
the Ministry of International Trade and Industry or other approval from another government agency.

© SEIKO EPSON CORPORATION 2001 All rights reserved.

New configuration of product number

Starting April 1, 2001, the product number has been changed as listed below. Please use the new
product number when you place an order. For further information, please contact Epson sales
representative.

Devices

S1 C 88104 F 0A01

Development tools

S5U1 C 88348 D1 1

00

Packing specification
Specification
Package (D: die form; F: QFP)
Model number
Model name (C: microcomputer, digital products)
Product classification (S1: semiconductor)

00

Packing specification
Version (1: Version 1)
Tool type (D1: Development Tool)
Corresponding model number (88348: for S1C88348)
Tool classification (C: microcomputer use)
Product classification
(S5U1: development tool for semiconductor products)

CONTENTS

S5U1C88000P Manual (S1C88 Family P eripheral Circuit Board)

This manual describes how to use the S1C88 Family Peripheral Circuit Board (S5U1C88000P). This circuit
board is used to provide emulation functions when it is installed in the ICE (S5U1C88000H5), a debug­ging tool for the 8-bit Single Chip Microcomputer S1C88 Family.
This manual describes only the common specifications of the S1C88 Family Peripheral Circuit Board
(S5U1C88000P), so refer to the S5U1C88000P manual (Peripheral Circuit Board for S1C88xxx) for the model
dependent specifications. For details on ICE functions and how to operate the debugger, refer to the
separately prepared manuals.

Contents

CHAPTER 1INTRODUCTION____________________________________________ 1

1.1 Outline of S5U1C88000P .............................................................................1

1.2 Components of S5U1C88000P .....................................................................1

1.3 External View of S5U1C88000P ................................................................... 1

CHAPTER 2SETTING UP THE S5U1C88000P _____________________________ 2

2.1 Installing the S5U1C88000P in the ICE (S5U1C88000H5) .................................. 2

2.2 Downloading Cricuit Data ............................................................................. 3

CHAPTER 3PRODUCT SPECIFICATIONS ___________________________________ 4

S5U1C88000P MANUAL EPSON i
(S1C88 FAMILY PERIPHERAL CIRCUIT BOARD)

CHAPTER 1: INTRODUCTION

CHAPTER 1INTR ODUCTION

1.1 Outline of S5U1C88000P

The S5U1C88000P provides on a board all the peripheral circuits of S1C88 Family microcomputers other
than the core CPU. By installing this board in the ICE (S5U1C88000H5) you can use it to emulate each
model in the S1C88 Family. This board contains a programmable gate array (FPGA) and supports each
model by downloading the circuit data from the host PC to the FPGA via the ICE.

1.2 Components of S5U1C88000P

After unpacking your S5U1C88000P package, check to see that all of the following components are
included.

(1) S5U1C88000P main unit.............................................................................................. 1 board

(2) I/O cable (80-pin/40-pin × 2 flat type) .................................................................... 2 pairs

(3) Connector for connecting to target system (40-pin)............................................... 4 pieces

(4) Warranty card ............................................................................................................... 1 card

(5) User registration card .................................................................................................. 1 card

(6) Precautions on using the S5U1C88000P Peripheral Circuit Board ...................... 1 sheet

(7) S5U1C88000P Manual (S1C88 Family Peripheral Circuit Board)........................ 1 copy

1.3 External View of S5U1C88000P

SW1

Fig. 1.3.1 External view of S5U1C88000P

I/O #2 connector

I/O #1 connector

S5U1C88000P MANUAL EPSON 1
(S1C88 FAMILY PERIPHERAL CIRCUIT BOARD)

CHAPTER 2: SETTING UP THE S5U1C88000P

CHAPTER 2SETTING UP THE S5U1C88000P

2.1 Installing the S5U1C88000P in the ICE (S5U1C88000H5)

Insert this board along by the lower guide rail of the ICE (S5U1C88000H5). The system may fail to
operate if this board is not adequately mounted, so be sure to mount it securely.

∗ The name 'ICE88UR' on the development tool is

the old name of the product.

Fig. 2.1.1 Installing the S5U1C88000P

2 EPSON S5U1C88000P MANUAL

(S1C88 FAMILY PERIPHERAL CIRCUIT BOARD)

CHAPTER 2: SETTING UP THE S5U1C88000P

2.2 Downloading Circuit Data

This board (S5U1C88000P) comes with the FPGA that contains factory inspection data, therefore the
circuit data for the model to be used should be downloaded. The following explains the downloading
procedure.

1

1) Set the switch "SW1"

2) Install this board to the ICE (S5U1C88000H5) as shown in Section 2.1.

3) Connect the ICE to the host PC. Then turn the host PC and ICE on.

4) Invoke the debugger included in the ICE or assembler package. For how to use the ICE and debugger,
refer to the manuals supplied with the ICE and assembler package.

5) Download the circuit data file (.mot) corresponding to the model by entering the following commands
in the command window.

*

on this board to the "3" position.

>XFER (erase all)

2

>XFWR <file name> (download the specified file)

*

>XFCP <file name> (compare the specified file and downloaded data)

6) Terminate the debugger and then turn the ICE off.

7) Remove this board from the ICE and set the switch "SW1" on the board to the "1" position.

8) Install this board to the ICE again.

9) Turn the ICE on and invoke the debugger again. Debugging can be started here.

∗1 See Figure 1.3.1, "External view of S5U1C88000P", for the location of SW1.
∗2 The downloading takes about 5 minutes.

S5U1C88000P MANUAL EPSON 3
(S1C88 FAMILY PERIPHERAL CIRCUIT BOARD)

CHAPTER 3: PRODUCT SPECIFICATIONS

CHAPTER 3PR ODUCT SPECIFICATIONS

The specifications of the S5U1C88000P are listed below.

S5U1C88000P

Dimension: 247.5 mm (wide) × 165 mm (depth) × 44.6 mm (height)
Weight: Approx. 500 g
Power supply: DC 5 V ± 5%, less than 1 A (supplied from ICE main unit)

I/O connection cable (80-pin)

S5U1C88000P connector: KEL8830E-080-170L, or equivalent
Cable connector (80-pin): KEL8822E-080-171 × 1
Cable connector (40-pin): 3M7940-6500SC × 2 pairs
Cable: 40-pin flat cable × 2 pairs
Interface: CMOS interface (3.3 V)
Length: Approx. 40 cm

Monitor signal cable

S5U1C88000P connector: 3M7610-5002SC, or equivalent
Cable connector (10-pin): 3M7910-6500SC × 1
Interface: CMOS interface (3.3 V)
Length: Approx. 40 cm

Accessories

40-pin connector for connecting to target system:

3M3432-6002LCSC × 4

4 EPSON S5U1C88000P MANUAL

(S1C88 FAMILY PERIPHERAL CIRCUIT BOARD)

International Sales Operations

AMERICA

EPSON ELECTRONICS AMERICA, INC.

- HEADQUARTERS -

150 River Oaks Parkway
San Jose, CA 95134, U.S.A.
Phone: [phone] Fax: [phone]

- SALES OFFICES ­West

1960 E. Grand Avenue
EI Segundo, CA 90245, U.S.A.
Phone: [phone] Fax: [phone]

Central

101 Virginia Street, Suite 290
Crystal Lake, IL 60014, U.S.A.
Phone: [phone] Fax: [phone]

Northeast

301 Edgewater Place, Suite 120
Wakefield, MA 01880, U.S.A.
Phone: [phone] Fax: [phone]

Southeast

3010 Royal Blvd. South, Suite 170
Alpharetta, GA 30005, U.S.A.
Phone: +1-877-EEA-0020 Fax: [phone]

EUROPE

EPSON EUROPE ELECTRONICS GmbH

- HEADQUARTERS -

Riesstrasse 15
80992 Munich, GERMANY
Phone: [phone] Fax: [phone]

ASIA

EPSON (CHINA) CO., LTD.

28F, Beijing Silver Tower 2# North RD DongSanHuan
ChaoYang District, Beijing, CHINA
Phone: [phone] Fax: [phone]

SHANGHAI BRANCH

4F, Bldg., 27, No. 69, Gui Jing Road
Caohejing, Shanghai, CHINA
Phone: [phone] Fax: [phone]

EPSON HONG KONG LTD.

20/F., Harbour Centre, 25 Harbour Road
Wanchai, Hong Kong
Phone: [phone] Fax: [phone]
Telex: 65542 EPSCO HX

EPSON TAIWAN TECHNOLOGY & TRADING LTD.

10F, No. 287, Nanking East Road, Sec. 3
Taipei
Phone: [phone] Fax: [phone]
Telex: 24444 EPSONTB

HSINCHU OFFICE

13F-3, No. 295, Kuang-Fu Road, Sec. 2
HsinChu 300
Phone: [phone] Fax: [phone]

EPSON SINGAPORE PTE., LTD.

No. 1 Temasek Avenue, #36-00
Millenia Tower, SINGAPORE 039192
Phone: [phone] Fax: [phone]

SEIKO EPSON CORPORATION KOREA OFFICE

50F, KLI 63 Bldg., 60 Yoido-dong
Youngdeungpo-Ku, Seoul, 150-763, KOREA
Phone: [phone] Fax: [phone]

SALES OFFICE

Altstadtstrasse 176
51379 Leverkusen, GERMANY
Phone: [phone] Fax: [phone]

UK BRANCH OFFICE

Unit 2.4, Doncastle House, Doncastle Road
Bracknell, Berkshire RG12 8PE, ENGLAND
Phone: [phone] Fax: [phone]

FRENCH BRANCH OFFICE

1 Avenue de l' Atlantique, LP 915 Les Conquerants
Z.A. de Courtaboeuf 2, F-91976 Les Ulis Cedex, FRANCE
Phone: [phone] Fax: [phone]

BARCELONA BRANCH OFFICE
Barcelona Design Center

Edificio Prima Sant Cugat
Avda. Alcalde Barrils num. 64-68
E-08190 Sant Cugat del Vallès, SPAIN
Phone: [phone] Fax: [phone]

SEIKO EPSON CORPORATION
ELECTRONIC DEVICES MARKETING DIVISION

Electronic Device Marketing Department
IC Marketing & Engineering Group

421-8, Hino, Hino-shi, Tokyo 191-8501, JAPAN
Phone: [phone] Fax: [phone]

ED International Marketing Department Europe & U.S.A.

421-8, Hino, Hino-shi, Tokyo 191-8501, JAPAN
Phone: [phone] Fax: [phone]

ED International Marketing Department Asia

421-8, Hino, Hino-shi, Tokyo 191-8501, JAPAN
Phone: [phone] Fax: [phone]

S5U1C88000P

Manual

(S1C88 Family Peripheral Circuit Board)

ELECTRONIC DEVICES MARKETING DIVISION

EPSON Electronic Devices Website

http://www.epson.co.jp/device/

Issue May, 2001

Printed in Japan A

M

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Epson:
S5U1C88000P1200