Epson Expression Home XP-220 User Manual

Download

Page 1

User's Guide

NPD5334-00 EN

Page 2

User's Guide

Copyright

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information herein. information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other products.

Neither Seiko Epson Corporation nor its aliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of accident, misuse, or abuse of this product or unauthorized modications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions.

Seiko Epson Corporation and its aliates shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.

e

Seiko Epson Corporation shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables other than those designated as Epson Approved Products by Seiko Epson Corporation.

contents of this manual and the

e

specications

of this product are subject to change without notice.

Page 3

User's Guide

Trademarks

❏ EPSON® is a registered trademark, and EPSON EXCEED YOUR VISION or EXCEED YOUR VISION is a

trademark of Seiko Epson Corporation.

❏ PRINT Image Matching™ and the PRINT Image Matching logo are trademarks of Seiko Epson Corporation.

❏ EPSON Scan soware is based in part on the work of the Independent JPEG Group.

❏

libti

Permission to use, copy, modify, distribute, and sell this soware and its documentation for any purpose is hereby granted without fee, provided that (i) the above copyright notices and this permission notice appear in all copies of the soware and related documentation, and (ii) the names of Sam Leer and Silicon Graphics may not be used in any advertising or publicity relating to the soware without the specic, prior written permission of Sam Leer and Silicon Graphics.

THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Leer

❏ Microso

❏ Apple, Macintosh, Mac OS, OS X, Bonjour, Safari, iPad, iPhone, iPod touch, and iTunes are trademarks of Apple

Inc., registered in the U.S. and other countries.

❏ Chrome™, Chrome OS™, and Android™ are trademarks of Google Inc.

❏ Adobe, Adobe Reader, Acrobat, and Photoshop are trademarks of Adobe systems Incorporated, which may be

registered in certain jurisdictions.

❏ Intel

❏ General Notice: Other product names used herein are for

of their respective owners. Epson disclaims any and all rights in those marks.

, Windows®, and Windows Vista® are registered trademarks of Microso Corporation.

is a registered trademark of Intel Corporation.

identication

purposes only and may be trademarks

Page 4

User's Guide

Contents

Trademarks

About This Manual

Introduction to the Manuals...................7

Marks and Symbols.........................7

Descriptions Used in this Manual...............7

Operating System References..................8

Important Instructions

Safety Instructions..........................9

Printer Advisories and Warnings............... 9

Advisories and Warnings for Setting Up/

Using the Printer.........................9

Advisories and Warnings for Using the

Printer with a Wireless Connection...........11

Printer Basics

Part Names and Functions...................12

Control Panel............................ 14

Loading Paper

Paper Handling Precautions..................16

Available Paper and Capacities................17

List of Paper Types.......................18

Loading Paper in the Rear Paper Feed...........18

Placing Originals on the Scanner Glass

Printing

Printing from a Computer...................24

Printing Basics - Windows.................24

Printing Basics - Mac OS X.................25

Printing on 2-Sides (for Windows only). . . . . . . .28

Printing Several Pages on One Sheet..........29

Printing to Fit the Paper Size................30

Printing Multiple Files Together (for

Windows Only).........................31

Enlarged Printing and Making Posters (for

Windows Only).........................32

Printing Using Advanced Features........... 38

Printing Photos Using Epson Easy Photo Print. . 40

Printing from Smart Devices................. 41

Using Epson iPrint.......................41

Canceling Printing.........................42

Canceling Printing - Printer Button...........42

Canceling Printing - Windows.............. 42

Canceling Printing - Mac OS X..............43

Copying

Copying Basics........................... 44

Making 20 Copies.........................44

Scanning

Scanning from the Control Panel.............. 45

Scanning from a Computer...................45

Scanning Basics.........................45

Scanning Using Advanced Features...........48

Scanning from Smart Devices.................51

Replacing Ink Cartridges

Checking the Ink Levels.....................53

Checking the Ink Levels - Windows...........53

Checking the Ink Levels - Mac OS X..........53

Ink Cartridge Codes........................53

Ink Cartridge Handling Precautions............54

Replacing Ink Cartridges.................... 56

Temporarily Printing with Black Ink............60

Temporarily Printing with Black Ink - Windows. 61 Temporarily Printing with Black Ink - Mac

OS X.................................62

Conserving Black Ink when the Black Ink Is

Low (for Windows Only)....................63

Improving Print and Scan Quality

Checking and Cleaning the Print Head..........64

Checking and Cleaning the Print Head -

Printer Buttons......................... 64

Checking and Cleaning the Print Head -

Windows..............................65

Checking and Cleaning the Print Head -

Mac OS X.............................65

Aligning the Print Head.....................66

Page 5

User's Guide

Contents

Aligning the Print Head - Windows...........66

Aligning the Print Head - Mac OS X..........66

Cleaning the Paper Path for Ink Smears..........66

Cleaning the Scanner Glass...................67

Applications and Network Service Information

Epson Connect Service......................68

Web Cong..............................68

Running Web Running Web

Running Web Cong on Mac OS X...........69

Necessary Applications......................70

Windows Printer Driver...................70

Mac OS X Printer Driver..................73

EPSON Scan (Scanner Driver)..............76

Epson Event Manager.....................76

Epson Easy Photo Print...................77

E-Web Print (for Windows Only)............77

Easy Photo Scan.........................77

EPSON

Uninstalling Applications....................78

Uninstalling Applications - Windows......... 78

Uninstalling Applications - Mac OS X.........79

Installing Applications......................79

Updating Applications and Firmware...........80

Soware

on a Web Browser.......68

Cong

on Windows........... 69

Cong

Updater..................78

Solving Problems

Checking the Printer Status.................. 81

Checking the Error Indicators on the Printer. . . . 81

Checking the Printer Status - Windows........82

Checking Printer Status - Mac OS X..........83

Removing Jammed Paper....................83

Removing Jammed Paper from the Rear

Paper Feed. . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

Removing Jammed Paper from the Output Tray. 84 Removing Jammed Paper from Inside the

Printer................................84

Paper Does Not Feed Correctly. . . . . . . . . . . . . . . .86

Power and Control Panel Problems.............87

Power Does Not Turn On..................87

Power Does Not Turn O..................87

Printer Does Not Print......................87

Printout Problems.........................88

Print Quality Is Poor..................... 88

Copy Quality Is Poor.....................89

An Image of the Reverse Side of the Original

Appears in the Copied Image...............89

e Position, Size, or Margins of the Printout

Are Incorrect...........................89

Paper Is Smeared or Scued................90

Printed Characters Are Incorrect or Garbled. . . . 91

e Printed Image Is Inverted...............91

e Printout Problem Could Not be Cleared. . . . 91

Printing Is Too Slow........................91

Cannot Start Scanning......................92

Cannot Start Scanning when Using the

Control Panel.......................... 93

Scanned Image Problems....................93

Scan Quality Is Poor......................93

Characters Are Blurred....................93

An Image of the Reverse Side of the Original

Appears in the Scanned Image..............93

Moire (Cross-Hatch) Patterns Appear in the

Scanned Image......................... 94

Scanning Area or Direction Is Not Correct. . . . . 94

e Scanned Image Problem Could Not be

Cleared...............................94

Other Scanning Problems....................95

Cannot Scan in Full Auto Mode in EPSON

Scan.................................95

umbnail Preview Does Not Work Properly. . . 95

Scanning Is Too Slow.....................95

Scanning Stops when Scanning to PDF/

Multi-TIFF............................ 95

Other Problems...........................95

Slight Electric Shock when Touching the

Printer................................95

Operation Sounds Are Loud................95

Application Is Blocked by a Firewall (for

Windows Only).........................95

Appendix

Technical Specications.....................96

Printer Specications.....................96

Scanner Specications....................97

Interface Wi - F i

Security Protocol........................98

Dimensions............................98

Electrical Environmental

System Requirements.....................99

Regulatory Information.....................99

Standards and Approvals for Australian Model. . 99

Restrictions on Copying..................100

Specications

....................97

......................97

...................98

...............99

Page 6

User's Guide

Contents

Saving Power............................100

Saving Power - Windows..................100

Saving Power - Mac OS X.................100

Transporting the Printer....................101

Where to Get Help........................103

Technical Support Web Site................103

Contacting Epson Support................103

Page 7

User's Guide

About This Manual

Introduction to the Manuals

e latest versions of the following manuals are available from the Epson support website.

http://www.epson.eu/Support (Europe)

http://support.epson.net/ (outside Europe)

❏ Start Here (paper manual)

Provides you with information on setting up the printer and installing the soware.

❏ User's Guide (digital manual)

manual. Provides instructions on using the printer, replacing ink cartridges, maintenance, and solving

is problems.

❏ Network Guide (digital manual)

Provides information on network settings and solving problems when using the printer on a network.

As well as the manuals above, see the help included in the various Epson soware applications.

Marks and Symbols

Caution:

Instructions that must be followed carefully to avoid bodily injury.

Important:

Instructions that must be observed to avoid damage to your equipment.

Note:

Provides complementary and reference information.

Related Information

Links to related sections.

Descriptions Used in this Manual

❏ Screenshots of the printer driver and the EPSON Scan (scanner driver) screens are from Windows 8.1 or Mac

OS X v10.9.x. e content displayed on the screens varies depending on the model and situation.

❏ Illustrations of the printer used in this manual are examples only. Although there may be slight

depending on the model, the method of operation is the same.

dierences

Page 8

User's Guide

About This Manual

Operating System References

Windows

In this manual, terms such as "Windows 8.1", "Windows 8", "Windows 7", "Windows Vista", and "Windows XP" refer to the following operating systems. Additionally, "Windows" is used to refer to all versions.

❏ Microso® Windows® 8.1 operating system

❏

Microso®

❏ Microso® Windows® 7 operating system

❏ Microso® Windows Vista® operating system

❏ Microso® Windows® XP operating system

❏ Microso® Windows® XP Professional x64 Edition operating system

Mac OS X

In this manual, "Mac OS X v10.9.x" refers to "OS X Mavericks" and "Mac OS X v10.8.x" refers to "OS X Mountain Lion". Additionally, "Mac OS X" is used to refer to "Mac OS X v10.9.x", "Mac OS X v10.8.x", "Mac OS X v10.7.x", and "Mac OS X v10.6.8".

Windows® 8 operating system

Page 9

User's Guide

Important Instructions

Safety Instructions

Read and follow these instructions to ensure safe use of this printer. Make sure you keep this manual for future reference. Also, be sure to follow all warnings and instructions marked on the printer.

❏ Use only the power cord supplied with the printer and do not use the cord with any other equipment. Use of

other cords with this printer or the use of the supplied power cord with other equipment may result in re or electric shock.

❏ Be sure your AC power cord meets the relevant local safety standard.

❏ Never disassemble, modify, or attempt to repair the power cord, plug, printer unit, scanner unit, or options by

yourself, except as specically explained in the printer's manuals.

❏ Unplug the printer and refer servicing to qualied service personnel under the following conditions:

e power cord or plug is damaged; liquid has entered the printer; the printer has been dropped or the casing damaged; the printer does not operate normally or exhibits a distinct change in performance. Do not adjust controls that are not covered by the operating instructions.

❏ Place the printer near a wall outlet where the plug can be easily unplugged.

❏ Do not place or store the printer outdoors, near excessive dirt or dust, water, heat sources, or in locations

subject to shocks, vibrations, high temperature or humidity.

❏ Take care not to spill liquid on the printer and not to handle the printer with wet hands.

❏ Keep the printer at least 22 cm away from cardiac pacemakers. Radio waves from this printer may adversely

aect the operation of cardiac pacemakers.

❏ Be careful when you handle used ink cartridges, as there may be some ink around the ink supply port.

❏ If ink gets on your skin, wash the area thoroughly with soap and water.

❏ If ink gets into your eyes, ush them immediately with water. If discomfort or vision problems continue aer

a thorough ushing, see a doctor immediately.

❏ If ink gets into your mouth, see a doctor right away.

❏ Do not disassemble the ink cartridge; otherwise ink may get into your eyes or on your skin.

❏ Do not shake ink cartridges too vigorously and do not drop them. Also, be careful not to squeeze them or tear

their labels. Doing so may cause ink leakage.

❏ Keep ink cartridges out of the reach of children.

Printer Advisories and Warnings

Read and follow these instructions to avoid damaging the printer or your property. Make sure you keep this manual for future reference.

Advisories and Warnings for Setting Up/Using the Printer

❏ Do not block or cover the vents and openings in the printer.

❏ Use only the type of power source indicated on the printer's label.

Page 10

User's Guide

Important Instructions

❏ Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and o.

❏ Avoid electrical outlets controlled by wall switches or automatic timers.

❏ Keep the entire computer system away from potential sources of electromagnetic interference, such as

loudspeakers or the base units of cordless telephones.

❏ e power-supply cords should be placed to avoid abrasions, cuts, fraying, crimping, and kinking. Do not place

objects on top of the power-supply cords and do not allow the power-supply cords to be stepped on or run over. Be particularly careful to keep all the power-supply cords straight at the ends and the points where they enter and leave the transformer.

❏ If you use an extension cord with the printer, make sure that the total ampere rating of the devices plugged into

the extension cord does not exceed the cord's ampere rating. Also, make sure that the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet's ampere rating.

❏ If you plan to use the printer in Germany, the building installation must be protected by a 10 or 16 amp circuit

breaker to provide adequate short-circuit protection and over-current protection for the printer.

❏ When connecting the printer to a computer or other device with a cable, ensure the correct orientation of the

connectors. Each connector has only one correct orientation. Inserting a connector in the wrong orientation may damage both devices connected by the cable.

❏ Place the printer on a at, stable surface that extends beyond the base of the printer in all directions. e

printer will not operate properly if it is tilted at an angle.

❏ When storing or transporting the printer, avoid tilting it, placing it vertically, or turning it upside down;

otherwise ink may leak.

❏ Allow space above the printer so that you can fully raise the document cover.

❏ Leave enough space in front of the printer for the paper to be fully ejected.

❏ Avoid places subject to rapid changes in temperature and humidity. Also, keep the printer away from direct

sunlight, strong light, or heat sources.

❏ Do not insert objects through the slots in the printer.

❏ Do not put your hand inside the printer during printing.

❏ Do not touch the white at cable inside the printer.

❏ Do not use aerosol products that contain ammable gases inside or around the printer. Doing so may cause

re.

❏ Do not move the print head by hand; otherwise, you may damage the printer.

❏ Be careful not to trap your ngers when closing the scanner unit.

❏ Do not press too hard on the scanner glass when placing the originals.

❏ Always turn the printer o using the

button. Do not unplug the printer or turn o the power at the outlet

until the

❏ Before transporting the printer, make sure that the print head is in the home (far right) position and the ink

cartridges are in place.

❏ If you are not going to use the printer for a long period, be sure to unplug the power cord from the electrical

outlet.

light stops ashing.

Page 11

User's Guide

Important Instructions

Advisories and Warnings for Using the Printer with a Wireless Connection

❏ Radio waves from this printer may negatively aect the operation of medical electronic equipment, causing

them to malfunction. When using this printer inside medical facilities or near medical equipment, follow directions from the authorized personnel representing the medical facilities, and follow all posted warnings and directions on the medical equipment.

❏ Radio waves from this printer may negatively

automatic doors or re alarms, and could lead to accidents due to malfunction. When using this printer near automatically controlled devices, follow all posted warnings and directions on these devices.

the operation of automatically controlled devices such as

aect

Page 12

User's Guide

Printer Basics

Part Names and Functions

Edge guide Feeds the paper straight into the printer. Slide to the

edges of the paper.

Rear paper feed Loads paper.

Paper support Supports loaded paper.

Feeder guard Prevents foreign substance from entering the printer.

Usually keep this guard closed.

Output tray Holds the ejected paper.

Control panel Operates the printer.

Scanner unit support Supports the scanner unit.

Page 13

User's Guide

Ink cartridge holder Install the ink cartridges. Ink is ejected from the print

Printer Basics

head nozzles underneath.

Document cover Blocks external light while scanning.

Scanner glass Place the originals.

Scanner unit Scans placed originals. Open when replacing ink

cartridges or removing jammed paper inside the printer.

AC inlet Connects the power cord.

USB port Connects a USB cable to connect with a computer.

Page 14

User's Guide

Control Panel

Printer Basics

AB G

The left and right lights indicate the network status.

❏ Green light - left: Turns on while the printer is trying to connect to a wireless (Wi-Fi) network,

or ashes while communicating.

❏ Orange light - right: Flashes when a problem with the printer's wireless (Wi-Fi) network

connection occurs.

The lights ash alternately or simultaneously while initializing or making network settings.

Turns the printer on or o.

Do not turn o while the power light is ashing (while the printer is operating or processing data).

Unplug the power cord when the power light is

When a network error occurs, pressing this button cancels the error. Hold this button down for more than three seconds to perform Wi-Fi auto setup using the WPS push button.

See the Network Guide for more details.

Prints the network status sheet allowing you to check the network settings and connection status. The PIN code for PIN Code Setup (WPS) is also printed.

Starts monochrome copying on A4 size plain paper.

Hold this button down for three seconds to start monochrome copying in draft mode.

For users in Belgium, the draft mode is not available.

o.

Starts color copying on A4 size plain paper.

Hold this button down for three seconds to start color copying in draft mode.

For users in Belgium, the draft mode is not available.

Stops the current operation.

Hold this button down for three seconds until the

When the ashes or turns o, hold this button down for six seconds to replace the cartridge.

Turns on or ashes when paper is out or a paper jam occurs.

Turns on when an ink cartridge error occurs, such as the ink cartridge needs to be replaced. Flashes when the ink is low.

light turns on, press this button to replace the ink cartridges. When the B light

Additional functions are available with dierent combinations of buttons.

button ashes to run print head cleaning.

Page 15

User's Guide

Printer Basics

+ Press and buttons simultaneously to run software on a USB-connected computer

and scan as a PDF le.

+ or Press y and the or buttons simultaneously to make 20 copies.

+ Press the and buttons simultaneously to start PIN Code Setup (WPS). See the

Network Guide for more details.

+ Turn the printer on while holding down the button to restore the default network

settings.

Turn the printer on while holding down the y button to print the nozzle check pattern.

Related Information

& “Checking the Error Indicators on the Printer” on page 81

Page 16

User's Guide

Loading Paper

Paper Handling Precautions

❏ Read the instruction sheets supplied with the paper.

❏ Fan and align the edges of the paper before loading. Do not fan or curl photo paper. Doing so may damage the

printable side.

❏ If the paper is curled, atten it or curl it slightly in the opposite direction before loading. Printing on curled

paper may cause paper jams and smears on the printout.

❏ Do not use paper that is wavy, torn, cut, folded, damp, too thick, too thin, or paper that has stickers stuck to it.

Using these types of paper causes paper jams and smears on the printout.

❏ Fan and align the edges of the envelopes before loading. When the stacked envelopes are

press them down to atten them before loading.

pued

up with air,

❏ Do not use envelopes that are curled or folded. Using these envelopes causes paper jams and smears on the

printout.

❏ Do not use envelopes with adhesive surfaces on the aps or window envelopes.

❏ Avoid using envelopes that are too thin, as they may curl during printing.

Related Information

& “Printer Specications” on page 96

Page 17

User's Guide

Loading Paper

Available Paper and Capacities

Epson recommends using genuine Epson paper to ensure high-quality printouts. e only paper size and paper type available for printing from the control panel are A4 size and plain paper.

Genuine Epson Paper

Media Name Size Loading

Capacity (Sheets)

Epson Bright White Ink Jet Paper

Epson Ultra Glossy Photo Paper

Epson Premium Glossy Photo Paper

Epson Premium Semigloss Photo Paper

Epson Photo Paper Glossy A4, 13 × 18 cm (5 × 7 in.), 10

Epson Matte PaperHeavyweight

Epson Photo Quality Ink Jet Paper

* For manual 2-sided printing, you can load up to 15 sheets for paper with one side already printed.

A4, 13 × 18 cm (5 × 7 in.), 10 × 15 cm (4 × 6 in.)

A4, 13 × 18 cm (5 × 7 in.), 16:9 wide size (102 x 181 mm), 10 × 15 cm (4 × 6 in.)

A4, 10 × 15 cm (4 × 6 in.) 10 – ✓

× 15 cm (4 × 6 in.)

A4 20 – ✓

A4 40 – –

10 – ✓

Manual 2Sided Printing

✓ –

Borderless Printing

Note:

e availability of paper varies by location. For the latest information on paper available in your area, contact Epson support.

Commercially Available Paper

Media Name Size Loading

Capacity (Number of sheets)

Plain paper

Envelope Envelope #10, Envelope DL,

Letter, A4, B5, A5 Up to the line

indicated by the

Legal 1

User Dened 1 ✓

Envelope C6

triangle symbol on the edge

guide.

5––

Manual 2Sided Printing

✓ –

Borderless Printing

Page 18

User's Guide

Loading Paper

*1 The loading capacity for pre-punched paper is one sheet.

*2 For manual 2-sided printing, you can load up to 15 sheets for paper with one side already printed.

Related Information

& “Technical Support Web Site” on page 103

List of Paper Types

To obtain optimum printing results, select the paper type that suits the paper.

Media Name

Epson Bright White Ink Jet Paper

Epson Ultra Glossy Photo Paper

Epson Premium Glossy Photo Paper

Epson Premium Semigloss Photo Paper

Epson Photo Paper Glossy

Epson Matte Paper-Heavyweight

Epson Photo Quality Ink Jet Paper

Plain paper

Envelope Envelope

*1 These paper types are compatible with Exif Print and PRINT Image Matching when printed by the printer driver. For more

information, see the documentation that came with the Exif Print or PRINT Image Matching compatible digital camera.

*2 For smart devices, these media types can be selected when printing using Epson iPrint.

Media Type

plain papers

Epson Ultra Glossy

Epson Premium Glossy

Epson Premium Semigloss

Photo Paper Glossy

Epson Matte

plain papers

Loading Paper in the Rear Paper Feed

1. Open the feeder guard, extend the paper support, and then tilt it backwards.

Page 19

User's Guide

Loading Paper

2. Slide the edge guide to the le.

Load paper vertically along the right side of the rear paper feed with the printable side facing up.

Important:

Do not load more than the maximum number of sheets specied for the paper. For plain paper, do not load above the line indicated by the triangle symbol on the edge guide.

❏ Envelopes

Page 20

User's Guide

Loading Paper

❏ Pre-punched paper

Note:

❏ Load a single sheet of paper without binding holes at the top or the bottom.

❏ Adjust the print position of your le to avoid printing over the holes.

4. Slide the edge guide to the edge of the paper, and then close the feeder guard.

5. Slide out the output tray.

Note:

Return the remaining paper to its package. If you leave it in the printer, the paper may curl or the print quality may decline.

Related Information

“Paper Handling Precautions” on page 16

Page 21

User's Guide

& “Available Paper and Capacities” on page 17

Loading Paper

Page 22

User's Guide

Placing Originals on the Scanner Glass

Important:

When placing bulky originals such as books, prevent exterior light from shining directly onto the scanner glass.

1. Open the document cover.

2. Remove any dust or stains on the scanner glass.

3. Place the original face-down and slide it to the corner mark.

Note:

e area 1.5 mm from the edges of the scanner glass is not scanned.

Page 23

User's Guide

Placing Originals on the Scanner Glass

If you are scanning using Full Auto Mode or a thumbnail preview of EPSON Scan, place the original 4.5 mm away from the horizontal and vertical edges of the scanner glass.

Note:

❏ Place multiple photos at least 20 mm apart from each other.

❏ e photos should be larger than 15 x 15 mm.

4. Close the cover gently.

Note:

Remove the originals aer scanning or copying. If you leave the originals on the scanner glass for a long time, they may stick to the surface of the glass.

Page 24

User's Guide

Printing

Printing from a Computer

Printing Basics - Windows

Note:

❏ See the online help for explanations of the setting items. Right-click an item, and then click Help.

❏ Operations dier depending on the application. See the application's help for details.

1. Load paper in the printer.

Open the le you want to print.

3. Select Print or Print Setup from the File menu.

4. Select your printer.

5. Select Preferences or Properties to access the printer driver window.

6. Make the following settings.

❏ Document Size: Select the paper size you loaded in the printer.

Page 25

User's Guide

Printing

❏ Borderless: Select to print with no margins around the image.

In borderless printing, the print data is enlarged slightly more than the paper size so that no margins are printed around the edges of the paper. Click Settings to select the amount of enlargement.

❏ Orientation: Select the orientation you set in the application.

❏ Paper Type: Select the type of paper you loaded.

❏ Color: Select Grayscale when you want to print in black or shades of gray.

Note: When printing on envelopes, select Landscape as the Orientation setting.

7. Click OK to close the printer driver window.

Click Print.

Related Information

& “Available Paper and Capacities” on page 17 & “Loading Paper in the Rear Paper Feed” on page 18 & “Guide to Windows Printer Driver” on page 70 & “List of Paper Types” on page 18

Printing Basics - Mac OS X

Note:

Operations dier depending on the application. See the application's help for details.

Load paper in the printer.

2. Open the le you want to print.

Page 26

User's Guide

Printing

3. Select Print from the File menu or another command to access the print dialog.

If necessary, click Show Details or

to expand the print window.

4. Make the following settings.

❏ Printer: Select your printer.

❏ Preset: Select when you want to use the registered settings.

❏ Paper Size: Select the paper size you loaded in the printer.

When printing with no margins, select a "borderless" paper size.

❏ Orientation: Select the orientation you set in the application.

Note:

When printing on envelopes, select landscape orientation.

Page 27

User's Guide

5. Select Print Settings from the pop-up menu.

Printing

Note:

On Mac OS X v10.8.x or later, if the Print Settings menu is not displayed, the Epson printer driver has not been installed correctly.

Select System Preferences from the printer, and then add the printer again. See the following to add a printer.

http://epson.sn

menu > Printers & Scanners (or Print & Scan, Print & Fax), remove the

6. Make the following settings.

❏ Media Type: Select the type of paper you loaded.

❏ Expansion: Available when selecting a borderless paper size.

In borderless printing, the print data is enlarged slightly more than the paper size so that no margins are printed around the edges of the paper. Select the amount of enlargement.

❏ Grayscale: Select to print in black or shades of gray.

7. Click Print.

Related Information

& “Available Paper and Capacities” on page 17 &

“Loading Paper in the Rear Paper Feed” on page 18

“Guide to Mac OS X Printer Driver” on page 74

& “List of Paper Types” on page 18

Page 28

User's Guide

Printing

Printing on 2-Sides (for Windows only)

e printer driver prints automatically separating even pages and odd pages. When the printer has nished printing the odd pages, ip the paper over following the instructions to print the even pages. You can also print a booklet that can be created by folding the printout.

Note:

❏ is feature is not available for borderless printing.

❏ If you do not use paper that is suitable for 2-sided printing, the print quality may decline and paper jams may occur.

❏ Depending on the paper and the data, ink may bleed through to the other side of the paper.

❏ If EPSON Status Monitor 3 is disabled, access the printer driver, click Extended Settings on the Maintenance tab, and

then select Enable EPSON Status Monitor 3.

❏ 2-sided printing may not be available when the printer is accessed over a network or is used as a shared printer.

1. Load paper in the printer.

2. Open the le you want to print.

Access the printer driver window.

4. Select a binding method from 2-Sided Printing on the Main tab.

5. Click Settings, make the appropriate settings, and then click OK to close the window.

Note: To print as a booklet, select Booklet.

6. Set the other items on the Main and More Options tabs as necessary, and then click OK.

7. Click Print.

When the instructions.

Related Information

& “Available Paper and Capacities” on page 17 & “Loading Paper in the Rear Paper Feed” on page 18 & “Printing Basics - Windows” on page 24

rst

side has

nished

printing, a pop-up window is displayed on the computer. Follow the on-screen

Page 29

User's Guide

Printing

Printing Several Pages on One Sheet

You can print two or four pages of data on a single sheet of paper.

Printing Several Pages on One Sheet - Windows

Note:

is feature is not available for borderless printing.

Load paper in the printer.

2. Open the le you want to print.

3. Access the printer driver window.

4. Select 2-Up or 4-Up as the Multi-Page setting on the Main tab.

5. Click Page Order, make the appropriate settings, and then click OK to close the window.

6. Set the other items on the Main and More Options tabs as necessary, and then click OK.

7. Click Print.

Related Information

“Loading Paper in the Rear Paper Feed” on page 18

& “Printing Basics - Windows” on page 24

Printing Several Pages on One Sheet - Mac OS X

1. Load paper in the printer.

Open the le you want to print.

3. Access the print dialog.

4. Select Layout from the pop-up menu.

Page 30

User's Guide

Printing

5. Set the number of pages in Pages per Sheet, the Layout Direction (page order), and Border.

6. Set the other items as necessary.

7. Click Print.

Related Information

& “Loading Paper in the Rear Paper Feed” on page 18 & “Printing Basics - Mac OS X” on page 25

Printing to Fit the Paper Size

You can print to t the paper size you loaded in the printer.

Printing to Fit the Paper Size - Windows

Note:

is feature is not available for borderless printing.

1. Load paper in the printer.

2. Open the le you want to print.

Access the printer driver window.

4. Make the following settings on the More Options tab.

❏ Document Size: Select the paper size you set in the application.

❏ Output Paper: Select the paper size you loaded in the printer.

Fit to Page is selected automatically.

Note: If you want to print a reduced image at the center of the page, select Center.

5. Set the other items on the Main and More Options tabs as necessary, and then click OK.

6. Click Print.

Page 31

User's Guide

Printing

Related Information

& “Loading Paper in the Rear Paper Feed” on page 18 & “Printing Basics - Windows” on page 24

Printing to Fit the Paper Size - Mac OS X

Load paper in the printer.

2. Open the le you want to print.

3. Access the print dialog.

Select the size of the paper you set in the application as the Paper Size setting.

5. Select Paper Handling from the pop-up menu.

6. Select Scale to t paper size.

7. Select the paper size you loaded in the printer as the Destination Paper Size setting.

8. Set the other items as necessary.

9. Click Print.

Related Information

& “Loading Paper in the Rear Paper Feed” on page 18 & “Printing Basics - Mac OS X” on page 25

Printing Multiple Files Together (for Windows Only)

Job Arranger Lite allows you to combine several les created by dierent applications and print them as a single print job. You can specify the print settings for combined

such as layout, print order, and orientation.

les,

1. Load paper in the printer.

Open the le you want to print.

3. Access the printer driver window.

4. Select Job Arranger Lite on the Main tab.

Click OK to close the printer driver window.

Page 32

User's Guide

Printing

6. Click Print.

Job Arranger Lite window is displayed and the print job is added to the Print Project.

e

7. With the Job Arranger Lite window opened, open the le that you want to combine with the current le, and then repeat steps 3 to 6.

Note: ❏ If you close the Job Arranger Lite window, the unsaved Print Project is deleted. To print later, select Save from the

File menu.

❏ To open a Print Project saved in Job Arranger Lite, click Job Arranger Lite on the printer driver's Maintenance

tab. Next, select Open from the File menu to select the le. e extension of the saved les is "ecl".

8. Select the Layout and Edit menus in Job Arranger Lite to edit the Print Project as necessary. See the help of Job Arranger Lite for details.

9. Select Print from the File menu.

Related Information

& “Loading Paper in the Rear Paper Feed” on page 18 & “Printing Basics - Windows” on page 24

Enlarged Printing and Making Posters (for Windows Only)

You can print one image on multiple sheets of paper to create a larger poster. You can print alignment marks that help you stick the sheets together.

Note:

is feature is not available for borderless printing.

1. Load paper in the printer.

2. Open the

3. Access the printer driver window.

4. Select 2x1 Poster, 2x2 Poster, 3x3 Poster, or 4x4 Poster from Multi-Page on the Main tab.

Click Settings, make the appropriate settings, and then click OK.

6. Set the other items on the Main and More Options tabs as necessary, and then click OK.

7. Click Print.

you want to print.

le

Page 33

User's Guide

Printing

Related Information

& “Loading Paper in the Rear Paper Feed” on page 18 & “Printing Basics - Windows” on page 24

Making Posters Using Overlapping Alignment Marks

Here is an example of how to make a poster when 2x2 Poster is selected, and Overlapping Alignment Marks is selected in Print Cutting Guides.

Page 34

User's Guide

Printing

1. Prepare Sheet 1 and Sheet 2. Cut o the margins of Sheet 1 along the vertical blue line through the center of the top and bottom cross marks.

2. Place the edge of Sheet 1 on top of Sheet 2 and align the cross marks, then temporarily tape the two sheets together from the back.

Page 35

User's Guide

Printing

3. Cut the taped sheets in two along the vertical red line through the alignment markers (this time, the line to the

of the cross marks).

le

4. Tape the sheets together from the back.

5. Repeat steps 1 to 4 to tape Sheet 3 and Sheet 4 together.

Page 36

User's Guide

Printing

6. Cut o the margins of Sheet 1 and Sheet 2 along the horizontal blue line through the center of the le and right side cross marks.

7. Place the edge of Sheet 1 and Sheet 2 on top of Sheet 3 and Sheet 4 and align the cross marks, and then temporarily tape them together from the back.

Page 37

User's Guide

Printing

8. Cut the taped sheets in two along the horizontal red line through the alignment markers (this time, the line above the cross marks).

9. Tape the sheets together from the back.

Page 38

User's Guide

Printing

10. Cut o the remaining margins along the outer guide.

Printing Using Advanced Features

is section introduces a variety of additional layout and printing features available on the printer driver.

Related Information

& “Windows Printer Driver” on page 70 & “Mac OS X Printer Driver” on page 73

Adding a Printing Preset to Print Easily

If you create your own preset of frequently used print settings on the printer driver, you can print easily by selecting the preset from the list.

Page 39

User's Guide

Printing

Windows

To add your own preset, set items such as the Document Size and Paper Type on the Main or More Options tab, and then click Add/Remove Presets in Printing Presets.

Note:

To delete an added preset, click Add/Remove Presets, select the preset name you want to delete from the list, and then delete it.

Mac OS X

Access the print dialog. To add your own preset, set items such as the Paper Size and Media Type, and then save the current settings as the preset in the Presets setting.

Note:

To delete an added preset, click Presets > Show Presets, select the preset name you want to delete from the list, and then delete it.

Printing a Reduced or Enlarged Document

You can reduce or enlarge the size of a document by a specic percentage.

Windows

Note:

is feature is not available for borderless printing.

Set the Document Size on the More Options tab. Select Reduce/Enlarge Document, Zoom to, and then enter a percentage.

Mac OS X

Select Page Setup from the File menu. Select the settings for Format For and Paper Size, and then enter a percentage in Scale. Close the window, and then print following the basic printing instructions.

Adjusting the Print Color

You can adjust the colors used in the print job.

PhotoEnhance produces sharper images and more vivid colors by automatically adjusting the contrast, saturation, and brightness of the original image data.

Note:

❏ ese adjustments are not applied to the original data.

❏ PhotoEnhance adjusts the color by analyzing the location of the subject. erefore, if you have changed the location of

the subject by reducing, enlarging, cropping, or rotating the image, the color may change unexpectedly. Selecting the borderless setting also changes the location of the subject resulting in changes in color. If the image is out of focus, the tone may be unnatural. If the color is changed or becomes unnatural, print in a mode other than PhotoEnhance.

Windows

Select the method of color correction from Color Correction on the More Options tab.

If you select Automatic, the colors are automatically adjusted to match the paper type and print quality settings. If you select Custom and click Advanced, you can make your own settings.

Page 40

User's Guide

Printing

Mac OS X

Access the print dialog. Select Color Matching from the pop-up menu, and then select EPSON Color Controls. Select Color Options from the pop-up menu, and then select one of the available options. Click the arrow next to Advanced Settings and make the appropriate settings.

Printing a Watermark (for Windows Only)

You can print a watermark such as "Condential" on your printouts. You can also add your own watermark.

Note:

is feature is not available for borderless printing.

Click Watermark Features on the More Options tab, and then select a watermark. Click Settings to change details such as the color and position of the watermark.

Printing a Header and Footer (for Windows Only)

You can print information such as a user name and printing date as headers or footers.

Click Watermark Features in the More Options tab, and then select Header/Footer. Click Settings and select necessary items from the drop-down list.

Printing Photos Using Epson Easy Photo Print

Epson Easy Photo Print lets you lay out and print photos easily on various types of paper. See the application's help for details.

Note:

❏ By printing on genuine Epson photo paper, the ink quality is maximized and the printouts are vivid and clear.

❏ To perform borderless printing using a commercially available application, make the following settings.

❏ Create the image data to fully t the paper size and if a margin setting is available in the application you are using, set

the margin to 0 mm.

❏ Enable the borderless printing setting in the printer driver.

Related Information

& “Available Paper and Capacities” on page 17

“Loading Paper in the Rear Paper Feed” on page 18

“Epson Easy Photo Print” on page 77

Page 41

User's Guide

Printing

Printing from Smart Devices

Using Epson iPrint

Epson iPrint is an application that allows you to print photos, documents, and Web pages from a smart device such as a smartphone or tablet. You can use either local print, printing from a smart device that is connected to the same wireless network as your printer, or remote print, printing externally over the internet. To use remote print, register your printer in the Epson Connect service.

You can install Epson iPrint on your smart device from the following URL or QR code.

http://ipr.to/a

Using Epson iPrint

Start Epson iPrint from your smart device and select the item you want to use from the home screen.

e following screens are subject to change without notice.

Home screen displayed when the application is started.

Page 42

User's Guide

Printing

Note:

To print from the document menu using iPhone, iPad, and iPod touch running iOS, start Epson iPrint aer transferring the document you want to print using the

Displays information on how to setup the printer and a FAQ.

Displays the screen where you can select the printer and make printer settings. Once you have selected the printer, you do not need to select it again from the next time.

Select what you want to print such as photos, documents, and web pages.

Displays the screen to make print settings such as paper size and paper type.

Displays photos and documents you selected.

Starts printing.

sharing function in iTunes.

le

Related Information

& “Epson Connect Service” on page 68

Canceling Printing

Note:

❏ In Windows, you cannot cancel a print job from the computer once it has been completely sent to the printer. In this case,

cancel the print job by using the printer's control panel.

❏ When printing several pages from Mac OS X, you cannot cancel all of the jobs by using the control panel. In this case,

cancel the print job from the computer.

❏ If you have sent a print job from Mac OS X v10.6.8 through the network, you may not be able to cancel printing from the

computer. In this case, cancel the print job by using the printer's control panel. You need to change settings in Web Cong to cancel printing from the computer. See the Network Guide for more details.

Canceling Printing - Printer Button

Press the y button to cancel the print job in progress.

Canceling Printing - Windows

Access the printer driver window.

2. Select the Maintenance tab.

3. Click Print Queue.

4. Right-click on the job you want to cancel and then select Cancel.

Related Information

“Windows Printer Driver” on page 70

Page 43

User's Guide

Canceling Printing - Mac OS X

1. Click the printer icon in the Dock.

2. Select the job you want to cancel.

3. Cancel the job.

❏ Mac OS X v10.8.x or later

Printing

Click

❏ Mac OS X v10.6.8 to v10.7.x

Click Delete.

next to the progress meter.

Page 44

User's Guide

Copying

Copying Basics

You can copy on A4-size plain paper at the same magnication. Margins with a width of 3 mm appear around the edges of the paper regardless of whether or not the original has margins around the edges of the paper. When copying originals smaller than A4-size, margins will be wider than 3 mm depending on the position where you place the original.

1. Load A4-size plain paper in the printer.

Place the originals.

3. Press the

Note:

Hold down the lower density.

Related Information

& “Loading Paper in the Rear Paper Feed” on page 18 & “Placing Originals on the Scanner Glass” on page 22

or button.

or button for three seconds to copy in dra mode, where you can use less ink and print at a

Making 20 Copies

You can make up to 20 copies at a time. Margins with a width of 3 mm appear around the edges of the paper.

1. Load the same number of sheets of A4-size plain paper that you want to copy in the printer.

2. Place the originals.

3. Press the

or button while holding down the y button.

Note:

❏ If you load less than 20 sheets of paper, an error occurs when the paper runs out and copying stops. To continue

copying, load more paper and then press the

❏ To make 21 copies or more, repeat step 3.

Related Information

& “Loading Paper in the Rear Paper Feed” on page 18 & “Placing Originals on the Scanner Glass” on page 22

or button. To nish copying, press the y button.

Page 45

User's Guide

Scanning

Scanning from the Control Panel

You can save the scanned image in PDF format to a computer which is connected to the printer with a USB cable.

Important:

Make sure you have installed EPSON Scan and Epson Event Manager on your computer before using this feature.

1. Place the originals.

2. Press the

Note:

You can change to frequently-used scan settings such as the document type, folder to save, or save format by using Epson Event Manager.

Related Information

& “Placing Originals on the Scanner Glass” on page 22

button and the button simultaneously.

Scanning from a Computer

Scan using the scanner driver "EPSON Scan". See the EPSON Scan help for an explanation of each setting item.

Scanning Basics

is section uses EPSON Scan's Home Mode to explain the basics of scanning. e operation work ow is the same in other scanning modes.

1. Place the originals.

2. Start EPSON Scan.

Page 46

User's Guide

3. Select Home Mode from the Mode list.

Scanning

4. Make the following settings.

❏ Document Type: Select the type of the original you want to scan.

❏ Image Type: Select the color type of the image you want to scan.

Although this is automatically selected by the Document Type setting, you can change the setting.

❏ Destination: Select the resolution of the image you want to scan.

If you select Other, you can set Resolution.

❏ umbnail: Only available if you select Photograph as the Document Type setting.

If you select this item and click Preview, you can scan by automatically detecting the scan area, direction, or skew of the document, or place multiple photos on the scanner glass.

Page 47

User's Guide

Scanning

5. Click Preview.

Note:

❏ Depending on the photos and the scanning conditions, the scan results may not be as intended. Clear

and only place one photo.

❏ When placing multiple photos, place them at least 20 mm (0.8 inch) apart. Also, the edge area of the scanner glass is

not scanned.

umbnail

6. Adjust the quality or brightness of the image as necessary.

Note:

Depending on the originals, the scan results may not be as intended.

7. Click Scan.

8. In the File Save Settings screen, make appropriate settings such as the le name, location, and image format type, and then click OK.

Note:

When Show this dialog box before next scan is cleared, the File Save Settings screen is not displayed and scanning

starts immediately. To display the File Save Settings screen, click the before starting to scan.

(File Save Settings) icon to the right of Scan

Related Information

& “Placing Originals on the Scanner Glass” on page 22 & “EPSON Scan (Scanner Driver)” on page 76

Page 48

User's Guide

Scanning

Scanning Using Advanced Features

Scanning by Detecting the Original Automatically (Full Auto Mode)

You can start scanning by simply placing the original and clicking Scan. Select Full Auto Mode from the Mode list in EPSON Scan.

Scanning at

You can scan originals at the specied size without previewing the image. Select Oce Mode from the Mode list in EPSON Scan.

Specied

Sizes (

Oce

Mode)

Page 49

User's Guide

Scanning

Note: Oce Mode is not available for Japanese operating systems.

Page 50

User's Guide

Scanning

Scanning by Adjusting the Image Quality (Professional Mode)

You can scan images while adjusting the quality and color. is mode is recommended for advanced users. Select Professional Mode from the Mode list in EPSON Scan.

Page 51

User's Guide

Scanning

Scanning from Smart Devices

Epson iPrint is an application that allows you to scan photos and documents from a smart device, such as a smartphone or tablet, that is connected to the same wireless network as your printer. You can save the scanned data on a smart device or to Cloud services, send it by email, or print it.

You can install Epson iPrint on your smart device from the following URL or QR code.

http://ipr.to/a

Using Epson iPrint

Start Epson iPrint from your smart device and select the item you want to use from the home screen.

e following screens are subject to change without notice.

Home screen displayed when the application is started.

Displays information on how to setup the printer and a FAQ.

Displays the screen where you can select the printer and make printer settings. Once you have selected the printer, you do not need to select it again from the next time.

Displays the scanning screen.

Displays the screen where you can make scan settings such as resolution.

Displays scanned images.

Starts scanning.

Page 52

User's Guide

Scanning

Displays the screen where you can save scanned data to a smart device or Cloud services.

Displays the screen where you can send scanned data by email.

Displays the screen where you can print scanned data.

Related Information

& “Using Epson iPrint” on page 41 & “Epson Connect Service” on page 68

Page 53

User's Guide

Replacing Ink Cartridges

Checking the Ink Levels

You can check the approximate ink levels from the computer.

Checking the Ink Levels - Windows

1. Access the printer driver window.

2. Click EPSON Status Monitor 3 on the Maintenance tab.

Note: If EPSON Status Monitor 3 is disabled, click Extended Settings on the Maintenance tab, and then select Enable EPSON Status Monitor 3.

Related Information

& “Windows Printer Driver” on page 70

Checking the Ink Levels - Mac OS X

1. Select System Preferences from the menu > Printers & Scanners (or Print & Scan, Print & Fax), and then select the printer.

2. Click Options & Supplies > Utility > Open Printer Utility.

3. Click EPSON Status Monitor.

Ink Cartridge Codes

Epson recommends the use of genuine Epson ink cartridges. Epson cannot guarantee the quality or reliability of non-genuine ink. e use of non-genuine ink may cause damage that is not covered by Epson’s warranties, and under certain circumstances, may cause erratic printer behavior. Information about non-genuine ink levels may not be displayed.

e following are the codes for genuine Epson ink cartridges.

BK (Black) C (Cyan) M (Magenta) Y (Yellow)

220

220XL

* "XL" indicates a large cartridge.

Note:

Not all cartridges are available in all regions.

220

220XL

220

220XL

220

220XL

Page 54

User's Guide

Replacing Ink Cartridges

Ink Cartridge Handling Precautions

Read the following instructions before replacing ink cartridges.

Handling precautions

❏ Store ink cartridges at normal room temperature and keep them away from direct sunlight.

❏ Epson recommends using the ink cartridge before the date printed on the package.

❏ For best results, use up ink cartridge within six months of opening the package.

❏ For best results, store ink cartridge packages with their bottom down.

❏ Aer bringing an ink cartridge inside from a cold storage site, allow it to warm up at room temperature for at

least three hours before using it.

❏ Do not open the ink cartridge package until you are ready to install it in the printer. e cartridge is vacuum

packed to maintain its reliability. If you leave a cartridge unpacked for a long time before using it, normal printing may not be possible.

❏ Be careful not to break the hooks on the side of the ink cartridge when you remove it from the package.

❏ You must remove the yellow tape from the cartridge before installing it; otherwise, print quality may decline or

you may not be able to print. Do not remove or tear the label on the cartridge; this can cause leakage.

❏ Do not remove the transparent seal from the bottom of the cartridge; otherwise, the cartridge may become

unusable.

Page 55

User's Guide

Replacing Ink Cartridges

❏ Do not touch the sections shown in the illustration. Doing so may prevent normal operation and printing.

❏ Install all ink cartridges; otherwise you cannot print.

❏ Do not replace ink cartridges with the power

damage the printer.

❏ Aer installing the ink cartridge, the power light continues to ash while the printer is charging ink. Do not

turn o the printer during ink charging. If the ink charging is incomplete, you may not be able to print.

❏ Do not leave the printer with the ink cartridges removed or do not turn o the printer during cartridge

replacement.Otherwise, ink remaining in the print head nozzles will dry out and you may not be able to print.

❏ If you need to remove an ink cartridge temporarily, make sure you protect the ink supply area from dirt and

dust. Store the ink cartridge in the same environment as the printer, with the ink supply port facing down or sideways. Do not store ink cartridges with the ink supply port facing up. Because the ink supply port is equipped with a valve designed to contain the release of excess ink, there is no need to supply your own covers or plugs.

❏ Removed ink cartridges may have ink around the ink supply port, so be careful not to get any ink on the

surrounding area when removing the cartridges.

❏ is printer uses ink cartridges equipped with a green chip that monitors information such as the amount of

remaining ink for each cartridge. is means that even if the cartridge is removed from the printer before it is expended, you can still use the cartridge aer reinserting it back into the printer. However, when reinserting a cartridge, some ink may be consumed to guarantee printer performance.

❏ For maximum ink eciency, only remove an ink cartridge when you are ready to replace it. Ink cartridges with

low ink status may not be used when reinserted.

❏ To ensure you receive premium print quality and to help protect your print head, a variable ink safety reserve

remains in the cartridge when your printer indicates to replace the cartridge. e yields quoted for you do not include this reserve.

Do not move the print head by hand; otherwise, you may

o.

❏ Although the ink cartridges may contain recycled materials, this does not aect printer function or

performance.

❏

Specications

❏ Do not disassemble or remodel the ink cartridge, otherwise you may not be able to print normally.

❏ You cannot use the cartridges that came with the printer for the replacement.

❏ Quoted yields may vary depending on the images that you are printing, the paper type that you are using, the

frequency of your prints and environmental conditions such as temperature.

Ink consumption

❏ To maintain optimum print head performance, some ink is consumed from all cartridges not only during

printing but also during maintenance operations such as ink cartridge replacement and print head cleaning.

and appearance of the ink cartridge are subject to change without prior notice for improvement.

Page 56

User's Guide

Replacing Ink Cartridges

❏ When printing in monochrome or grayscale, color inks instead of black ink may be used depending on the

paper type or print quality settings.

❏ e ink in the ink cartridges supplied with your printer is partly used during initial setup. In order to produce

high quality printouts, the print head in your printer will be fully charged with ink. consumes a quantity of ink and therefore these cartridges may print fewer pages compared to subsequent ink cartridges.

is because a mixture of color inks is used to create black.

is

is one-o

process

Replacing Ink Cartridges

Caution:

Be careful not to trap your hand or

Note:

If you replace the ink cartridges while coping, the originals may move out of place. Press the the originals.

when opening or closing the scanner unit. Otherwise you may be injured.

ngers

button to cancel and replace

1. Open the scanner unit with the document cover closed.

2. Operate the printer's buttons to move the print head.

❏ If the

Press the

cartridges, the cartridge moves to the

❏ If the

light is on

button. e expended ink cartridge moves to the icon. If there are more expended ink

icon every time you press the y button.

light ashes

Press the

to the

you press the

❏ If the

Press the replacement position. Proceed to step 4.

button for six seconds until the print head moves. e ink cartridge that is running low moves

icon. If there are more ink cartridges running low, the cartridge moves to the icon every time

button.

light is o

button for six seconds until the print head moves. e print head moves to the ink cartridge

Page 57

User's Guide

Replacing Ink Cartridges

Note:

To cancel ink cartridge replacement, keep the ink cartridges installed and turn o the printer.

3. Press the y button again.

print head moves to the ink cartridge replacement position.

e

4. Gently shake the new ink cartridge four or

times and then remove it from its package.

ve

Page 58

User's Guide

5. Remove only the yellow tape.

Replacing Ink Cartridges

Important:

❏ Do not touch the sections shown in the illustration. Doing so may prevent normal operation and printing.

❏ Do not shake cartridges aer opening the package, as they may leak.

6. Squeeze the tab on the ink cartridge and pull it straight up. If you cannot remove the ink cartridge, pull it rmly.

Page 59

User's Guide

Replacing Ink Cartridges

7. Insert the new ink cartridge, and then press it down rmly.

8. Close the scanner unit.

9. Press the y button.

Ink charging starts.

Important:

Aer installing the ink cartridge, the power light continues to ash while the printer is charging ink. Do not turn o the printer during ink charging. Charging takes approximately two minutes. If the ink charging is incomplete, you may not be able to print.

Note:

If the

light does not turn o, try removing and reinserting the ink cartridge.

Related Information

& “Ink Cartridge Codes” on page 53 & “Ink Cartridge Handling Precautions” on page 54

Page 60

User's Guide

Replacing Ink Cartridges

Temporarily Printing with Black Ink

When color ink is expended and black ink still remains when printing from a computer, you can use the following settings to continue printing for a short time using only black ink.

❏ Type of paper: plain papers, Envelope

❏ Color: Grayscale

❏ Borderless: Not selected

❏ EPSON Status Monitor 3: Enabled (for Windows only)

Because this feature is only available for approximately ve days, replace the expended ink cartridge as soon as possible.

Note:

❏ If EPSON Status Monitor 3 is disabled, access the printer driver, click Extended Settings on the Maintenance tab, and

then select Enable EPSON Status Monitor 3.

❏ e available period varies depending on the usage conditions.

Page 61

User's Guide

Replacing Ink Cartridges

Temporarily Printing with Black Ink - Windows

1. When the following window is displayed, cancel printing.

Note:

If you cannot cancel printing from the computer, cancel using the printer's control panel.

2. Access the printer driver window.

3. Clear Borderless on the Main tab.

4. Select plain papers or Envelope as the Paper Type setting on the Main tab.

Page 62

User's Guide

Replacing Ink Cartridges

5. Select Grayscale.

6. Set the other items on the Main and More Options tabs as necessary, and then click OK.

Click Print.

8. Click Print in Black in the window displayed.

Related Information

& “Loading Paper in the Rear Paper Feed” on page 18 & “Printing Basics - Windows” on page 24

Temporarily Printing with Black Ink - Mac OS X

Note: To use this feature through a network, connect with Bonjour.

1. Click the printer icon in the Dock.

Cancel the job.

❏ Mac OS X v10.8.x to Mac OS X v10.9.x

Click

❏ Mac OS X v10.6.8 to v10.7.x

Click Delete.

Note:

If you cannot cancel printing from the computer, cancel using the printer's control panel.

3. Select System Preferences from the menu > Printers & Scanners (or Print & Scan, Print & Fax), and then select the printer. Click Options & Supplies > Options (or Driver).

4. Select On as the Permit temporary black printing setting.

5. Access the print dialog.

6. Select Print Settings from the pop-up menu.

7. Select any paper size except for a borderless size as the Paper Size setting.

next to the progress meter.

8. Select plain papers or Envelope as the Media Type setting.

9. Select Grayscale.

10.

Set the other items as necessary.

11. Click Print.

Related Information

& “Loading Paper in the Rear Paper Feed” on page 18 & “Printing Basics - Mac OS X” on page 25

Page 63

User's Guide

Replacing Ink Cartridges

Conserving Black Ink when the Black Ink Is Low (for Windows Only)

When black ink is running low and there is enough color ink remaining, you can use a mixture of color inks to create black. You can continue printing while preparing a replacement black ink cartridge.

is feature is only available when you select the following settings in the printer driver.

❏ Paper Type: plain papers

❏ Quality: Standard

❏ EPSON Status Monitor 3: Enabled

Note:

❏ If EPSON Status Monitor 3 is disabled, access the printer driver, click Extended Settings on the Maintenance tab, and

then select Enable EPSON Status Monitor 3.

❏ Composite black looks slightly dierent from pure black. In addition, the print speed is reduced.

❏ To maintain the quality of the print head, black ink is also consumed.

Options Description

Yes Select to use a mixture of color inks to create black. This window is displayed the next time

you print a similar job.

No Select to continue using the remaining black ink. This window is displayed the next time

you print a similar job.

Disable this feature Select to continue using the remaining black ink. This window is not displayed until you

replace the black ink cartridge and it runs low again.

Page 64

User's Guide

Improving Print and Scan Quality

Checking and Cleaning the Print Head

If the nozzles are clogged, the printouts become faint, there is visible banding, or unexpected colors appear. When print quality has declined, use the nozzle check feature and check if the nozzles are clogged. If the nozzles are clogged, clean the print head.

Important:

Do not open the scanner unit or turn o the printer during head cleaning. If the head cleaning is incomplete, you may not be able to print.

Note:

❏ Because print head cleaning uses some ink, clean the print head only if quality declines.

❏ When ink is low you may not be able to clean the print head. Replace the appropriate ink cartridge rst.

❏ If print quality has not improved aer repeating nozzle check and head cleaning about four times, wait for at least six

hours without printing, and then run the nozzle check again and repeat the head cleaning if necessary. If the printer operates printing while waiting, extend the waiting time. We recommend to turn o the printer. If print quality has still not improved, contact Epson support.

❏ To prevent the print head from drying out, always turn the printer o by pressing the

❏ To keep the print head operating at its best, we recommend printing a few pages on a regular basis.

button.

Checking and Cleaning the Print Head - Printer Buttons

1. Load A4-size plain paper in the printer.

2. Press the

Turn the printer on while holding the ashes.

e

4. Compare the printed check pattern with the sample shown below.

button to turn o the printer.

nozzle check pattern is printed.

button down, and then release the buttons when the power light

❏ All lines are printed: e print head nozzles are not clogged. You do not need to clean the print head.

Page 65

User's Guide

Improving Print and Scan Quality

❏ ere are broken lines or missing segments: e print head nozzles may be clogged. Go to the next step.

Note:

e test pattern may vary by model.

5. Hold the y button down for three seconds until the power light starts ashing.

Print head cleaning starts.

6. When the power light stops ashing, print a nozzle check pattern again. Repeat cleaning and printing the pattern until all lines are printed completely.

Related Information

& “Loading Paper in the Rear Paper Feed” on page 18

Checking and Cleaning the Print Head - Windows

Load A4-size plain paper in the printer.

2. Access the printer driver window.

3. Click Nozzle Check on the Maintenance tab.

Follow the on-screen instructions.

Related Information

& “Loading Paper in the Rear Paper Feed” on page 18 & “Windows Printer Driver” on page 70

Checking and Cleaning the Print Head - Mac OS X

1. Load A4-size plain paper in the printer.

2. Select System Preferences from the then select the printer.

3. Click Options & Supplies > Utility > Open Printer Utility.

Click Nozzle Check.

5. Follow the on-screen instructions.

menu > Printers & Scanners (or Print & Scan, Print & Fax), and

Page 66

User's Guide

Improving Print and Scan Quality

Related Information

& “Loading Paper in the Rear Paper Feed” on page 18

Aligning the Print Head

If you notice a misalignment of vertical lines or blurred images, align the print head.

Aligning the Print Head - Windows

1. Load A4-size plain paper in the printer.

2. Access the printer driver window.

3. Click Print Head Alignment on the Maintenance tab.

4. Follow the on-screen instructions.

Related Information

& “Loading Paper in the Rear Paper Feed” on page 18 & “Windows Printer Driver” on page 70

Aligning the Print Head - Mac OS X

1. Load A4-size plain paper in the printer.

2. Select System Preferences from the then select the printer.

3. Click Options & Supplies > Utility > Open Printer Utility.

4. Click Print Head Alignment.

5. Follow the on-screen instructions.

Related Information

menu > Printers & Scanners (or Print & Scan, Print & Fax), and

& “Loading Paper in the Rear Paper Feed” on page 18

Cleaning the Paper Path for Ink Smears

When the printouts are smeared or scued, clean the roller inside.

Important:

Do not use tissue paper to clean the inside of the printer. e print head nozzles may be clogged with lint.

1. Make sure there is no dust or stains on the scanner glass and the document cover.

Page 67

User's Guide

Improving Print and Scan Quality

2. Load A4-size plain paper in the printer.

3. Start copying without placing the original.

Note:

Repeat this procedure until the paper is not smeared with ink.

Related Information

& “Loading Paper in the Rear Paper Feed” on page 18 & “Copying Basics” on page 44

Cleaning the Scanner Glass

When the copies or scanned images are smeared or

Important:

scued,

clean the scanner glass.

Never use alcohol or thinner to clean the printer. ese chemicals can damage the printer.

Open the document cover.

2. Use a

Note:

❏ If the glass surface is stained with grease or some other hard-to-remove material, use a small amount of glass cleaner

dry, clean cloth to clean the surface of the scanner glass.

so,

and a so cloth to remove it. Wipe o all remaining liquid.

❏ Do not press the glass surface too hard.

❏ Be careful not to scratch or damage the surface of the glass. A damaged glass surface can decrease the scan quality.

Page 68

User's Guide

Applications and Network Service Information

Epson Connect Service

By using Epson Connect service available on the Internet, you can print from your smartphone, tablet PC, or laptop, anytime and practically anywhere.

e features available on the Internet are as follows.

Email Print Epson iPrint remote print Scan to Cloud Remote Print Driver

✓✓ – ✓

See the Epson Connect portal website for details.

https://www.epsonconnect.com/

http://www.epsonconnect.eu (Europe only)

Web Cong

Web Cong is an application that runs in a web browser, such as Internet Explorer and Chrome, on a computer or smart device. You can conrm the printer status or change the network service and printer settings. To use the Web Cong, connect the printer and the computer or device to the same network.

Note:

e following browsers are supported.

OS Browser

Windows XP or later

Mac OS X v10.6.8 or later

iOS

Android 2.3 or later Default browser

Internet Explorer 8 or later, Firefox

, Firefox*, Chrome

Safari

, Chrome

Chrome OS

*: Use the latest version.

Default browser

Running Web Cong on a Web Browser

1. Check the printer's IP address.

Press the

button to print the network status sheet, and then check the printer's IP address.

Page 69

User's Guide

Applications and Network Service Information

2. Launch a Web browser from a computer or smart device, and then enter the printer's IP address.

Format:

IPv4: http://the printer's IP address/

IPv6: http://[the printer's IP address]/

Examples:

IPv4: http://192.168.100.201/

IPv6: http://[2001:db8::1000:1]/

Note:

Using the smart device, you can also run Web Cong from the maintenance screen of Epson iPrint.

Related Information

& “Using Epson iPrint” on page 41

Running Web Cong on Windows

When connecting a computer to the printer using WSD, follow the steps below to run Web Cong.

Access the devices and printers screen in Windows.

❏ Windows 8.1/Windows 8

Select Desktop > Settings > Control Panel > Vi e w de v ice s and p r i nter s in Hardware and Sound (or Hardware).

❏ Wind o w s 7

Click the start button, and select Control Panel > Vi e w d e vic e s and p ri nte r s in Hardware and Sound.

❏ Wind o w s Vis t a

Click the start button, and select Control Panel > Printers in Hardware and Sound.

2. Right-click on your printer and select Properties.

Select the Web Service tab and click the URL.

Running Web Cong on Mac OS X

1. Select System Preferences from the menu > Printers & Scanners (or Print & Scan, Print & Fax), and then select the printer.

Click Options & Supplies> Show Printer Webpage.

Page 70

User's Guide

Applications and Network Service Information

Necessary Applications

Windows Printer Driver

printer driver is an application that controls the printer according to the print commands from other

e applications. Making settings on the printer driver provides the best printing results. You can also check the status of the printer or keep it in top operating condition using the printer driver utility.

Note: You can change the language of the printer driver. Select the language you want to use from the Language setting on the Maintenance tab.

Accessing the printer driver from applications

To make settings that apply only to the application you are using, access from that application.

Select Print or Print Setup from the File menu. Select your printer, and then click Preferences or Properties.

Note:

Operations dier depending on the application. See the application's help for details.

Accessing the printer driver from the control panel

To make settings that apply to all of the applications, access from the control panel.

❏ Windows 8.1/Windows 8

Select Desktop > Settings > Control Panel > Vi e w de v ice s and p r i nter s in Hardware and Sound. Right-click on your printer, or press and hold it and then select Printing preferences.

❏ Wi n d o ws 7

Click the start button, and select Control Panel > Vi e w d e vic e s and p ri nte r s in Hardware and Sound. Right- click on your printer and select Printing preferences.

❏ Windows Vista

Click the start button, and select Control Panel > Printers in Hardware and Sound. Right-click on your printer and select Printing preferences.

❏ Wi n d o ws XP

Click the start button, and select Control Panel > Printers and Other Hardware > Printers and Faxes. Right- click on your printer and select Printing preferences.

Accessing the printer driver from the printer icon on the task bar

e printer icon on the desktop task bar is a shortcut icon allowing you to quickly access the printer driver.

If you click the printer icon and select Printer Settings, you can access the same printer settings window as the one displayed from the control panel. If you double-click this icon, you can check the status of the printer.

Note: If the printer icon is not displayed on the task bar, access the printer driver window, click Monitoring Preferences on the Maintenance tab, and then select Register the shortcut icon to the taskbar.

Guide to Windows Printer Driver

Help is available in the printer driver for Windows. To view explanations of the setting items, right-click on each item, and then click Help.

Page 71

User's Guide

Applications and Network Service Information

Main Tab

You can make basic settings for printing, such as paper type or paper size.

You can also make settings for printing both sides of the paper or printing multiple pages on one sheet.

Page 72

User's Guide

Applications and Network Service Information

More Options Tab

You can select additional layout and printing options such as changing the size of a printout or making color corrections.

Page 73

User's Guide

Applications and Network Service Information

Maintenance Tab

You can run maintenance features such as nozzle check and print head cleaning, and by starting EPSON Status Monitor 3, you can check printer status and error information.

Making Operation Settings for the Windows Printer Driver

You can make settings such as enabling EPSON Status Monitor 3.

1. Access the printer driver window.

2. Click Extended Settings on the Maintenance tab.

3. Make the appropriate settings, and then click OK.

See the online help for explanations of the setting items.

Related Information

“Windows Printer Driver” on page 70

Mac OS X Printer Driver

e printer driver is an application that controls the printer according to the print commands from other applications. Making settings on the printer driver provides the best printing results. You can also check the status of the printer or keep it in top operating condition using the printer driver utility.

Page 74

User's Guide

Applications and Network Service Information

Accessing the printer driver from applications

Select Print from the File menu. If necessary, click Show Details (or

Note:

Operations dier depending on the application. See the application's help for details.

) to expand the print window.

Starting the utility

Select System Preferences from the

menu > Printers & Scanners (or Print & Scan, Print & Fax), and then

select the printer. Click Options & Supplies > Utility > Open Printer Utility.

Guide to Mac OS X Printer Driver

Print dialog

Switch the pop-up menu on the center of the screen to show more items.

Pop-up Menu Descriptions

Print Settings You can make the basic print settings such as paper type and print quality.

Two-sided Printing Settings

Layout You can select a layout for printing several pages on one sheet or select to print a border.

Paper Handling You can reduce or enlarge the size of the print job to automatically t the paper size you

Color Matching You can adjust the colors.

You can select a binding direction for 2-sided printing or select a document type. This menu is only displayed for automatic 2-sided printing capable models.

loaded.

Page 75

User's Guide

Applications and Network Service Information

Note:

On Mac OS X v10.8.x or later, if Print Settings menu is not displayed, Epson printer driver has not been installed correctly.

Select System Preferences from the and then add the printer again. See the following to add a printer.

http://epson.sn

Epson Printer Utility

You can run a maintenance feature such as nozzle check and print head cleaning, and by starting EPSON Status Monitor, you can check printer status and error information.

menu > Printers & Scanners (or Print & Scan, Print & Fax), remove the printer,

Making Operation Settings for the Mac OS X Printer Driver

You can make various settings such as skipping blank pages and enabling/disabling high speed printing.

1. Select System Preferences from the then select the printer. Click Options & Supplies > Options (or Driver).

2. Make the appropriate settings, and then click OK.

❏ ick paper and envelopes: Prevents the ink from smearing when printing on thick paper. However, the

print speed may be slower.

❏ Skip Blank Page: Avoids printing blank pages.

❏ Quiet Mode: Prints quietly. However, the print speed may be slower.

❏ Permit temporary black printing: Prints only with black ink temporarily.

menu > Printers & Scanners (or Print & Scan, Print & Fax), and

Page 76

User's Guide

Applications and Network Service Information

❏ High Speed Printing: Prints when the print head moves in both directions. e print speed is faster, but the

quality may decline.

❏ Remove white borders: Removes unnecessary margins during borderless printing.

❏ Warning Notications: Allows the printer driver to display warning notications.

❏ Establish bidirectional communication: Usually, this should be set to On. Select O when acquiring the

printer information is impossible because the printer is shared with Windows computers on a network or for any other reason.

❏ Lower Cassette: Add the optional paper cassette units to the paper source.

Note:

e availability of these settings varies by model.

Related Information

& “Temporarily Printing with Black Ink” on page 60

EPSON Scan (Scanner Driver)

EPSON Scan is an application for controlling scanning. You can adjust the size, resolution, brightness, contrast, and quality of the scanned image.

Note:

You can also start EPSON Scan from a TWAIN-compliant scanning application.

Starting on Windows

❏ Windows 8.1/Windows 8

Enter the application name in the search charm, and then select the displayed icon.

❏ Except for Windows 8.1/Windows 8

Click the start button, and select All Programs or Programs > EPSON > EPSON Scan > EPSON Scan.

Starting on Mac OS X

Note:

EPSON Scan does not support the Mac OS X fast user switching feature. Turn o fast user switching.

Select Go > Applications > Epson

Soware

> EPSON Scan.

Epson Event Manager

Epson Event Manager is an application that allows you to manage scanning from the control panel and save images to a computer. You can add your own settings as presets, such as the document type, the save folder location, and the image format. See the application's help for details.

Starting on Windows

❏ Windows 8.1/Windows 8

Enter the application name in the search charm, and then select the displayed icon.

❏ Except for Windows 8.1/Windows 8

Click the start button, and select All Programs or Programs > Epson

Soware

> Event Manager.

Page 77

User's Guide

Applications and Network Service Information

Starting on Mac OS X

Select Go > Applications > Epson Soware > Event Manager.

Related Information

& “Scanning from the Control Panel” on page 45

Epson Easy Photo Print

Epson Easy Photo Print is an application that allows you to easily print photos with various layouts. You can preview the photo image and adjust the images or position. You can also print photos with a frame. See the application's help for details.

Note:

To use this application, the printer driver needs to be installed.

Starting on Windows

❏ Windows 8.1/Windows 8

Enter the application name in the search charm, and then select the displayed icon.

❏ Except for Windows 8.1/Windows 8

Click the start button, and then select All Programs or Programs > Epson Soware > Epson Easy Photo Print.

Starting on Mac OS X

Select Go > Applications > Epson Soware > Epson Easy Photo Print.

E-Web Print (for Windows Only)

E-Web Print is an application that allows you to easily print web pages with various layouts. See the application's help for details. You can access the help from the E-Web Print menu on the E-Web Print tool bar.

Starting

When you install E-Web Print, it is displayed in your browser. Click Print or Clip.

Easy Photo Scan

Easy Photo Scan is an application that allows you to scan photos and easily send the scanned image to a computer or cloud service. You can also easily adjust the scanned image. See the application's help for details.

Note:

To use this application, the scanner driver EPSON Scan needs to be installed.

Starting on Windows

❏ Windows 8.1/Windows 8

Enter the application name in the search charm, and then select the displayed icon.

❏ Except for Windows 8.1/Windows 8

Click the start button, and select All Programs or Programs > Epson Soware > Easy Photo Scan.

Page 78

User's Guide

Applications and Network Service Information

Starting on Mac OS X

Select Go > Applications > Epson Soware > Easy Photo Scan.

EPSON Software Updater

EPSON You can also update the printer's rmware and manual.

Starting on Windows

❏ Windows 8.1/Windows 8

❏ Except for Windows 8.1/Windows 8

Note:

You can also start EPSON Soware Updater by clicking the printer icon on the task bar on the desktop, and then selecting

Soware

Starting on Mac OS X

Select Go > Applications > Epson Soware > EPSON Soware Updater.

Soware

Enter the application name in the search charm, and then select the displayed icon.

Click the start button, and select All Programs or Programs > Epson Soware > EPSON Soware Updater.

Update.

Updater is an application that checks for new or updated

soware

on the internet and installs it.

Uninstalling Applications

Note:

Log on to your computer as an administrator. Enter the administrator password if the computer prompts you.

Uninstalling Applications - Windows

1. Press the P button to turn o the printer.

Quit all running applications.

3. Open Control Panel:

❏ Windows 8.1/Windows 8

Select Desktop > Settings > Control Panel.

❏ Except for Windows 8.1/Windows 8

Click the start button and select Control Panel.

4. Open Uninstall a program (or Add or Remove Programs):

❏ Windows 8.1/Windows 8/Windows 7/Windows Vista

Select Uninstall a program in Programs.

❏ Wind o w s XP

Click Add or Remove Programs.

5. Select the application you want to uninstall.

Page 79

User's Guide

Applications and Network Service Information

6. Uninstall the applications:

❏ Windows 8.1/Windows 8/Windows 7/Windows Vista

Click Uninstall/Change or Uninstall.

❏ Wind o w s XP

Click Change/Remove or Remove.

Note: If the User Account Control window is displayed, click Continue.

7. Follow the on-screen instructions.

Uninstalling Applications - Mac OS X

1. Download the Uninstaller using EPSON Soware Updater.

Once you have downloaded the Uninstaller, you do not need to download it again each time you uninstall the application.

2. Turn o the printer by pressing the

3. To uninstall the printer driver, select System Preferences from the & Scan, Print & Fax), and then remove the printer from the enabled printers list.

4. Quit all running applications.

5. Select Go > Applications > Epson Soware > Uninstaller.

Select the application you want to uninstall, and then click Uninstall.

Important:

button.

menu > Printers & Scanners (or Print

e Uninstaller removes all drivers for Epson inkjet printers on the computer. If you use multiple Epson inkjet printers and you only want to delete some drivers, delete all of them rst, and then install the necessary printer driver again.

Note:

If you cannot nd the application you want to uninstall in the application list, you cannot uninstall using the Uninstaller. In this situation, select Go > Applications > Epson and then drag it to the trash icon.

Related Information

Soware

, select the application you want to uninstall,

& “EPSON Soware Updater” on page 78

Installing Applications

Connect your computer to the network and install the latest version of applications from the website.

Note:

❏ Log on to your computer as an administrator. Enter the administrator password if the computer prompts you.

❏ When reinstalling an application, you need to uninstall it rst.

Page 80

User's Guide

Applications and Network Service Information

1. Quit all running applications.

2. When installing the printer driver or EPSON Scan, disconnect the printer and the computer temporarily.

Note:

Do not connect the printer and the computer until you are instructed to do so.

Install the applications by following the instructions on the website below.

http://epson.sn

Note:

If you are using a Windows computer and you cannot download applications from the website, install them from the soware

Related Information

& “Uninstalling Applications” on page 78

disc that came with the printer.

Updating Applications and Firmware

You may be able to clear certain problems and improve or add functions by updating the applications and the rmware. Make sure you use the latest version of the applications and rmware.

1. Make sure that the printer and the computer are connected, and the computer is connected to the internet.

2. Start EPSON Soware Updater, and update the applications or the rmware.

Important:

Do not turn o the computer or the printer while updating.

Note:

If you cannot nd the application you want to update in the list, you cannot update using the EPSON Soware Updater. Check for the latest versions of the applications from your local Epson website.

http://www.epson.com

Related Information

& “EPSON

Soware

Updater” on page 78

Page 81

User's Guide

Solving Problems

Checking the Printer Status

Checking the Error Indicators on the Printer

When an error occurs, the light turns on or ashes. Details of the error are displayed on the computer screen.

: On

: Flashing slowly

: Flashing fast

Light Situation Solutions

No paper is loaded or more than one sheet has been fed at a time.

A paper jam has occurred.

An ink cartridge is expended or there is insucient ink.

An ink cartridge is not installed. Install the ink cartridge.

An ink cartridge has not been recognized. Press the ink cartridge down rmly.

An unsupported ink cartridge has been installed.

An ink cartridge is nearly expended.

You can print until the

ink in the cartridge to charge the

light turns on.

Load paper and press the

Remove the paper and press the button.

To ensure you receive premium print quality and to help protect your print head, a variable ink safety reserve remains in the cartridge when your printer indicates it is time to replace the cartridge. Replace with a new ink cartridge.

Install an ink cartridge that is supported by this printer.

You cannot use the cartridges that came with your printer for replacement.

Prepare a new ink cartridge. You can check the ink levels from the computer.

or button.

The b light and B light ash alternately.

An ink pad is nearing or at the end of its service life.

The ink pads* need to be replaced.

Contact Epson or an authorised Epson service provider to replace the ink pad*. It is not a userserviceable part.

When a message saying that you can continue printing is displayed on the computer, press the

or button to continue printing. The lights stop ashing for the time being, however, they will continue to ash at regular intervals until the ink pad is replaced.

Page 82

User's Guide

Solving Problems

Light Situation Solutions

A printer error has occurred. Open the scanner unit and remove any paper or

protective material inside the printer. Turn the power o and on again.

If the error continues to occur after turning the power o and on again, contact Epson support.

A Wi-Fi connection error has occurred. Press the button to clear the error and try again.

See the Network Guide for more details.

The printer has started in recovery mode because the rmware update failed.

Follow the steps below to try to update the rmware again.

1. Connect the computer and the printer with a USB cable. (During recovery mode, you cannot update the rmware over a network connection.)

2. Visit your local Epson website for further instructions.

The printer noties you of the rmware update status as shown below.

Preparing: The network status lights

Updating: The power light ashes.

Finished: The power light stops ashing and stays on.

ash.

* In some print cycles a very small amount of surplus ink may be collected in the ink pad. To prevent ink leakage from the pad, the printer is designed to stop printing when the pad has reached its limit. Whether and how oen this is required will vary according to the number of pages you print, the type of material that you print and the number of cleaning cycles that the printer performs. e need for replacement of the pad does not mean that your printer has ceased to operate in accordance with its specications. e printer will advise you when the pad requires replacing and this can only be performed by an authorised Epson Service provider. e Epson warranty does not cover the cost of this replacement.

Related Information

& “Removing Jammed Paper” on page 83 & “Contacting Epson Support” on page 103 & “Installing Applications” on page 79 & “Updating Applications and Firmware” on page 80

Checking the Printer Status - Windows

1. Access the printer driver window.

Page 83

User's Guide

Solving Problems

2. Click EPSON Status Monitor 3 on the Maintenance tab.

Note:

❏ You can also check the printer status by double-clicking the printer icon on the taskbar. If the printer icon is not

added to the taskbar, click Monitoring Preferences on the Maintenance tab, and then select Register the shortcut icon to the taskbar.

❏ If EPSON Status Monitor 3 is disabled, click Extended Settings on the Maintenance tab, and then select Enable

EPSON Status Monitor 3.

Related Information

& “Windows Printer Driver” on page 70

Checking Printer Status - Mac OS X

Select System Preferences from the then select the printer.

menu > Printers & Scanners (or Print & Scan, Print & Fax), and

2. Click Options & Supplies > Utility > Open Printer Utility.

3. Click EPSON Status Monitor.

Removing Jammed Paper

Check the error displayed on the control panel and follow the instructions to remove the jammed paper including any torn pieces. Next, clear the error.

Important:

Remove the jammed paper carefully. Removing the paper vigorously may cause damage to the printer.

Related Information

& “Checking the Error Indicators on the Printer” on page 81

Page 84

User's Guide

Solving Problems

Removing Jammed Paper from the Rear Paper Feed

Remove the jammed paper.

Removing Jammed Paper from the Output Tray

Remove the jammed paper.

Removing Jammed Paper from Inside the Printer

Caution:

❏ Be careful not to trap your hand or ngers when opening or closing the scanner unit. Otherwise you may be

injured.

❏ Never touch the buttons on the control panel while your hand is inside the printer. If the printer starts operating,

it could cause an injury. Be careful not to touch the protruding parts to avoid injury.

Page 85

User's Guide

Solving Problems

1. Open the scanner unit with the document cover closed.

2. Remove the jammed paper.

Important:

Do not touch the white at cable or translucent part inside the printer. Doing so may cause a malfunction.

Page 86

User's Guide

3. Close the scanner unit.

Solving Problems

Paper Does Not Feed Correctly

Check the following if the paper jams, paper is fed at a slant, several sheets of paper are fed at a time, no paper is fed, or paper is ejected.

❏ Place the printer on a at surface and operate in the recommended environmental conditions.

❏ Use paper supported by this printer.

❏ Follow the paper handling precautions.

❏ Load paper in the correct direction, and slide the edge guide against the edge of the paper.

❏ Do not load more than the maximum number of sheets

above the line indicated by the triangle symbol on the edge guide.

❏ When a paper out error occurs although paper is loaded in the printer, reload paper against the right edge of the

rear paper feed.

❏ Load one sheet of paper at a time when loading multiple sheets of paper.

❏ When several sheets of paper are fed at a time during manual 2-sided printing, remove any paper which is

loaded in the paper source before you reload the paper.

❏ Load and eject paper without printing to clean the paper path.

❏ Printing may pause for a certain length of time. If printing is paused, the paper is ejected.

specied

for the paper. For plain paper, do not load

Related Information

“Environmental Specications” on page 99

& “Available Paper and Capacities” on page 17 & “Paper Handling Precautions” on page 16 & “Loading Paper in the Rear Paper Feed” on page 18

Page 87

User's Guide

Solving Problems

Power and Control Panel Problems

Power Does Not Turn On

❏ Hold down the P button for a little longer.

❏ Make sure the power cord is securely plugged in.

Power Does Not Turn O

Hold down the P button for a little longer. If you still cannot turn o the printer, unplug the power cord. To

prevent the print head from drying out, turn the printer back on and turn it o by pressing the

button.

Printer Does Not Print

Check the following if the printer does not operate or prints nothing.

❏ Install the printer driver.

❏ To print photos easily, install Epson Easy Photo Print.

❏ Connect the USB cable securely to the printer and the computer.

❏ If you are using a USB hub, try to connect the printer directly to the computer.

❏ If you are using the printer over a network, make sure the printer is connected to the network. You can check

the status by checking the indicators on the control panel or by printing the network status sheet. If the printer is not connected to the network, see the Network Guide.

❏ If you are printing a large data size image, the computer may run out of memory. Print the image at a lower

resolution or a smaller size.

❏ In Windows, click Print Queue on the printer driver's Maintenance tab, and then check the following.

❏ Check if there are any paused print jobs.

Cancel printing if necessary.

❏ Make sure the printer is not oine or pending.

If the printer is

❏ Make sure the printer is selected as the default printer from the Printer menu (there should be a check mark

on the menu item).

If the printer is not selected as the default printer, set it as the default printer.

or pending, clear the

oine

or pending setting from the Printer menu.

oine

❏ In Mac OS X, make sure the printer status is not Pause.

Select System Preferences from the double-click the printer. If the printer is paused, click Resume (or Resume Printer).

❏ Run the nozzle check, and then clean the print head if any of the print head nozzles are clogged.

Related Information

& “Installing Applications” on page 79 & “Epson Easy Photo Print” on page 77

menu > Printers & Scanners (or Print & Scan, Print & Fax), and then

Page 88

User's Guide

Solving Problems

& “Canceling Printing” on page 42 & “Checking and Cleaning the Print Head” on page 64 & “Web Cong” on page 68

Printout Problems

Print Quality Is Poor

Check the following if the print quality is poor due to blurry prints, banding, missing colors, faded colors, misalignment, and mosaic-like patterns in the prints.

❏ Run the nozzle check, and then clean the print head if any of the print head nozzles are clogged.

❏ Align the print head.

❏ Use paper supported by this printer.

❏ Do not print on paper that is damp, damaged, or too old.

❏ If the paper is curled or the envelope is pued up, atten it.

❏ When printing images or photos, print using high-resolution data. Images on websites are

although they look good enough on the display, and so print quality may decline.

❏ Select the appropriate paper type setting in the printer driver for the type of paper loaded in the printer.

❏ Print using a high quality setting in the printer driver.

❏ If you hold down the

banding may appear on the printout.

❏ When images or photos are printed in unexpected colors, adjust the color and then print again. e automatic

color correction feature uses the standard PhotoEnhance correction mode. Try another PhotoEnhance correction mode by selecting an option other than Auto Correct as the Scene Correction setting. If the problem continues, use any other color correction feature other than PhotoEnhance.

❏ Wi n d o w s

Select Custom as the Color Correction setting on the printer driver's More Options tab. Click Advanced, and then select anything other than PhotoEnhance as the Color Management setting.

❏ Mac OS X

Select the Color Matching menu on the print dialog, and select EPSON Color Controls. Select Color Options from the pop-up menu, and then select a color correction mode other than PhotoEnhance.

or button for more than three seconds, the printer copies in dra mode and

low resolution

oen

❏ Disable the bidirectional (or high speed) setting. When this setting is enabled, the print head prints while

moving in both directions, and vertical lines may be misaligned. If you disable this feature, printing may slow down.

❏ Wi n d o w s

Clear High Speed on the printer driver's More Options tab.

❏ Mac OS X

Select System Preferences from the then select the printer. Click Options & Supplies > Options (or Driver). Select O as the High Speed Printing setting.

❏ Do not stack the paper immediately aer printing.

menu > Printers & Scanners (or Print & Scan, Print & Fax), and

Page 89

User's Guide

Solving Problems

❏ Dry the printouts completely before ling or displaying them. When drying the printouts, avoid direct sun light,

do not use a dryer, and do not touch the printed side of paper.

❏ Try to use genuine Epson ink cartridges. is product is designed to adjust colors based on the use of genuine

Epson ink cartridges. e use of non-genuine ink cartridges may cause print quality to decline.

❏ Epson recommends using the ink cartridge before the date printed on the package.

❏ For best results, use up ink cartridge within six months of opening the package.

❏ When printing images or photos, Epson recommends using genuine Epson paper rather than plain paper. Print

on the printable side of the genuine Epson paper.

Related Information

& “Checking and Cleaning the Print Head” on page 64 & “Aligning the Print Head” on page 66 & “Available Paper and Capacities” on page 17 & “Paper Handling Precautions” on page 16 & “List of Paper Types” on page 18

Copy Quality Is Poor

Check the following if uneven colors, smears, dots, or straight lines appear in the copied image.

❏ Load and eject paper without printing to clean the paper path.

❏ Clean the scanner glass and the document cover.

❏ Do not press too hard on the original or the document cover when you are placing the originals on the scanner

glass. Uneven colors, smears, or dots may appear when the original or the document cover are pressed too hard.

❏ If banding appears at intervals of 2.5 cm, align the print head.

❏ If a moire (cross-hatch) pattern appears, change the reduce and enlarge setting or place the original at a slightly

dierent

Related Information

& “Cleaning the Paper Path for Ink Smears” on page 66 & “Cleaning the Scanner Glass” on page 67 & “Aligning the Print Head” on page 66 & “Print Quality Is Poor” on page 88

angle.

An Image of the Reverse Side of the Original Appears in the Copied Image

For a thin original, place the original on the scanner glass and then place a piece of black paper over it.

The Position, Size, or Margins of the Printout Are Incorrect

❏ Load paper in the correct direction, and slide the edge guides against the edges of the paper.

Page 90

User's Guide

Solving Problems

❏ When placing the originals on the scanner glass, align the corner of the original with the corner indicated by a

symbol on the frame of the scanner glass. If the edges of the copy are cropped away from the corner.

❏ Clean the scanner glass and the document cover. If there is dust or stains on the glass, the copy area may extend

to include the dust or stains, resulting in the wrong printing position or small images.

❏ Select the appropriate paper size setting in the printer driver.

❏ Adjust the margin setting in the application so that it falls within the printable area.

❏ If you want to print with no margins, make settings for borderless printing.

❏ Wi n d o w s

Select Borderless on the printer driver's Main tab. If you select a paper type unavailable for borderless printing, you cannot select this check box. Select the paper available for borderless printing.

❏ Mac OS X

Select a paper size for borderless printing as the Paper Size setting in the print dialog.

❏ During borderless printing, the image is slightly enlarged and the protruding area is cropped. Adjust the

amount of enlargement.

move the original slightly

o,

❏ Wi n d o w s

Click Settings of the Borderless on the printer driver's Main tab and select the amount of enlargement.

❏ Mac OS X

Select the Print Settings menu in the print dialog and select the amount of enlargement in the Expansion setting.

Related Information

& “Loading Paper in the Rear Paper Feed” on page 18 & “Placing Originals on the Scanner Glass” on page 22 & “Cleaning the Scanner Glass” on page 67 & “Printable Area” on page 96 & “Available Paper and Capacities” on page 17

Paper Is Smeared or

Check the following if the paper is smeared or scued when printing.

❏ Clean the paper path.

❏ Clean the scanner glass and the document cover.

Scued

❏ Load paper in the correct direction.

❏ When performing manual 2-sided printing, make sure that the ink is completely dry before reloading the paper.

Related Information

& “Cleaning the Paper Path for Ink Smears” on page 66 & “Cleaning the Scanner Glass” on page 67 & “Loading Paper in the Rear Paper Feed” on page 18 & “Print Quality Is Poor” on page 88

Page 91

User's Guide

Solving Problems

Printed Characters Are Incorrect or Garbled

❏ Connect the USB cable securely to the printer and the computer.

❏ Cancel any paused print jobs.

❏ Do not put the computer manually into the Hibernate mode or the Sleep mode while printing. Pages of garbled

text may be printed next time you start the computer.

Related Information

& “Canceling Printing” on page 42

The Printed Image Is Inverted

Clear any mirror image settings in the printer driver or the application.

❏ Wi n d o w s

Clear Mirror Image on the printer driver's More Options tab.

❏ Mac OS X

Clear Mirror Image from the print dialog's Print Settings menu.

The Printout Problem Could Not be Cleared

If you have tried all of the solutions and have not solved the problem, try uninstalling and then reinstalling the printer driver.

Related Information

& “Uninstalling Applications” on page 78 & “Installing Applications” on page 79

Printing Is Too Slow

❏ When printing continuously for approximately more than 30 minutes, printing slows down to prevent the

printer mechanism from overheating and being damaged. However, you can continue printing. To return the printer to normal printing speed, cancel printing, and leave the printer idle for at least 30 minutes with the power on. e printer does not recover if the power is o.

❏ Close any unnecessary applications.

❏ Lower the quality setting on the printer driver. High quality printing slows down the printing speed.

❏ Enable the bidirectional (or high speed) setting. When this setting is enabled, the print head prints while

moving in both directions, and the printing speed increases.

❏ Wi n d o w s

Select High Speed on the printer driver's More Options tab.

❏ Mac OS X

Select System Preferences from the then select the printer. Click Options & Supplies > Options (or Driver). Select On as the High Speed Printing setting.

menu > Printers & Scanners (or Print & Scan, Print & Fax), and

Page 92

User's Guide

Solving Problems

❏ Disable quiet mode. is feature slows down the printing speed.

❏ Wi n d o w s

Disable the Quiet Mode setting on the printer driver's Main tab.

❏ Mac OS X

Select System Preferences from the then select the printer. Click Options & Supplies > Options (or Driver). Select O as the Quiet Mode setting.

menu > Printers & Scanners (or Print & Scan, Print & Fax), and

Cannot Start Scanning

❏ Connect the USB cable securely to the printer and the computer.

❏ If you are using a USB hub, try to connect the printer directly to the computer.

❏ If you cannot scan over a network, see the Network Guide.

❏ If you scan at a high resolution over a network, a communication error may occur. Lower the resolution.

❏ Make sure you select the correct printer (scanner) if a scanner list is displayed when you start EPSON Scan.

❏ If you are using any TWAIN-compliant applications, select the printer (scanner) you are using.

❏ In Windows, make sure the printer (scanner) is displayed in Scanner and Camera. e printer (scanner) should

be displayed as "EPSON XXXXX (printer name)". If the printer (scanner) is not displayed, uninstall and then re-install EPSON Scan. See the following to access Scanner and Camera.

❏ Windows 8.1/Windows 8

Select Desktop > Settings > Control Panel, enter "Scanner and Camera" in the search charm, click Show Scanner and Camera, and then check if the printer is displayed.

❏ Wind o w s 7

Click the start button and select Control Panel, enter "Scanner and Camera" in the search charm, click Vi e w scanners and cameras, and then check if the printer is displayed.

❏ Wind o w s Vi s t a

Click the start button, select Control Panel > Hardware and Sound > Scanners and Cameras, and then check if the printer is displayed.

❏ Wind o w s X P

Click the start button, select Control Panel > Printers and Other Hardware > Scanner and Cameras, and then check if the printer is displayed.

❏ If you cannot scan using any TWAIN-compliant applications, uninstall and then reinstall the TWAIN-

compliant application.

❏ For Mac OS X with an Intel processor, if other Epson scanner drivers except for EPSON Scan, such as Rosetta or

PPC are installed, uninstall them and EPSON Scan, and then reinstall EPSON Scan.

Related Information

& “Uninstalling Applications” on page 78 & “Installing Applications” on page 79

Page 93

User's Guide

Solving Problems

Cannot Start Scanning when Using the Control Panel

❏ Make sure EPSON Scan and Epson Event Manager are installed correctly.

❏ Check the scanning setting assigned in Epson Event Manager.

Related Information

& “Cannot Start Scanning” on page 92

Scanned Image Problems

Scan Quality Is Poor

❏ Clean the scanner glass.

❏ Do not press too hard on the original or the document cover when you are placing the originals on the scanner

glass. Uneven colors, smears, or dots may appear when the original or the document cover is pressed too hard.

❏ Remove dust from the original.

❏ Make the appropriate document type settings.

❏ Scan at a higher resolution.

❏ Adjust the image in EPSON Scan, and then scan. See the EPSON Scan help for details.

Related Information

& “Cleaning the Scanner Glass” on page 67

Characters Are Blurred

❏ In Home Mode or Oce Mode in EPSON Scan, select Image Option as the Image Adjustments setting, and

then select Text Enhancement.

❏ In Professional Mode in EPSON Scan, select Document as the Auto Exposure Type in the Original settings.

❏ Adjust the threshold settings in EPSON Scan.

❏ Home Mode

Select Black & White as the Image Type setting, click Brightness, and then adjust the threshold.

❏ Oce Mode

Select Black & White as the Image Type setting, and then adjust the threshold.

❏ Professional Mode

Select Black & White as the Image Type setting, and then adjust the threshold setting.

❏ Scan at a higher resolution.

An Image of the Reverse Side of the Original Appears in the Scanned Image

❏ For a thin original, place the original on the scanner glass and then place a piece of black paper over it.

Page 94

User's Guide

Solving Problems

❏ Make the appropriate document type settings.

❏ In Home Mode or Oce Mode in EPSON Scan, select Image Option as the Image Adjustments setting, and

then select Text Enhancement.

Moire (Cross-Hatch) Patterns Appear in the Scanned Image

❏ Place the original at a slightly dierent angle.

❏ Select Descreening in any mode other than Full Auto Mode in EPSON Scan.

❏ Change the resolution setting.

Scanning Area or Direction Is Not Correct

❏ When placing the originals on the scanner glass, align the corner of the original with the corner indicated by a

symbol on the frame of the scanner glass. If the edges of the scanned image are cropped o, move the original slightly away from the corner.

❏ Clean the scanner glass and the document cover. If there is dust or stains on the glass, the scanning area may

extend to include the dust or stains, resulting in the wrong scanning position or small images.

❏ When you place multiple originals on the scanner glass to scan them separately, but they are scanned onto a

single le, place the originals at least 20 mm (0.8 inch) apart. If the problem continues, place one original at a time.

❏ Set the scan area correctly.

❏ When scanning using Full Auto Mode or the thumbnail preview in EPSON Scan, move the original 4.5 mm

(0.18 inch) away from the edges of the scanner glass.

❏ When using the thumbnail preview for a large original in Home Mode or Professional Mode in EPSON Scan,

the scanning area may not be correct. When previewing in EPSON Scan, create marquees of the area you want to scan on the Preview tab in the Preview window.

❏ If Auto Photo Orientation in EPSON Scan does not work as intended, see the EPSON Scan help.

❏ Clear Auto Photo Orientation in EPSON Scan.

❏ When scanning with EPSON Scan the available scanning area may be restricted if the resolution setting is too

high. Lower the resolution or adjust the scanning area in the Preview window.

Related Information

& “Placing Originals on the Scanner Glass” on page 22 & “Cleaning the Scanner Glass” on page 67

The Scanned Image Problem Could Not be Cleared

If you have tried all of the solutions and could not solve the problem, click Full Auto Mode in the EPSON Scan window, and then click Reset All on the Other tab to initialize the EPSON Scan settings. If initialization does not solve the problem uninstall and re-install EPSON Scan.

Related Information

& “Uninstalling Applications” on page 78 & “Installing Applications” on page 79

Conguration

in a mode other than

Page 95

User's Guide

Solving Problems

Appendix

Technical Specications

Appendix

Printer

Print Head Nozzle Placement Black ink nozzles: 128

Weight of Paper Plain Paper 64 to 90 g/m(17 to 24lb)

Specications

Color ink nozzles: 42 for each color

Envelopes Envelope #10, DL, C6: 75 to 90 g/m (20 to 24 lb)

Printable Area

Print quality may decline in the shaded areas due to the printer's mechanism.

Single sheets (normal printing)

A 3.0 mm (0.12 in.)

B 3.0 mm (0.12 in.)

C 40.0 mm (1.57 in.)

D 34.0 mm (1.34 in.)

Single sheets (borderless printing)

A 43.0 mm (1.69 in.)

B 37.0 mm (1.46 in.)

Page 97

User's Guide

Appendix

Envelopes

A 3.0 mm (0.12 in.)

B 5.0 mm (0.20 in.)

C 18.0 mm (0.71 in.)

D 40.0 mm (1.57 in.)

Scanner Specications

Scanner Type Flatbed

Photoelectric Device CIS

Maximum Document Size 216 × 297 mm (8.5 × 11.7 in.)

A4, Letter

Resolution 1200 dpi (main scan)

2400 dpi (sub scan)

Color Depth Color

❏ 48 bits per pixel internal (16 bits per pixel per color internal)

❏ 24 bits per pixel external (8 bits per pixel per color external)

Grayscale

❏ 16 bits per pixel internal

❏ 8 bits per pixel external

Black and white

❏ 16 bits per pixel internal

❏ 1 bits per pixel external

Light Source LED

Interface

For Computer Hi-Speed USB

Specications

Wi-Fi

Standards

Frequency Range 2.4 GHz

Coordination Modes

Wireless Securities

Specications

IEEE802.11b/g/n

Infrastructure, Ad hoc

WEP (64/128bit), WPA2-PSK (AES)

Page 98

User's Guide

Appendix

*1 Complies with either IEEE 802.11b/g/n or IEEE 802.11b/g depending on location of purchase.

*2 Not supported for IEEE 802.11n.

*3 Complies with WPA2 standards with support for WPA/WPA2 Personal.

Security Protocol

SSL/TLS HTTPS Client

Dimensions

Dimensions Storage

❏ Width: 390 mm (15.4 in.)

❏ Depth: 300 mm (11.8 in.)

❏ Height: 145 mm (5.7 in.)

Printing

❏ Width: 390 mm (15.4 in.)

❏ Depth: 504 mm (19.8 in.)

❏ Height: 279 mm (11.0 in.)

Weight

* Without the ink cartridges and the power cord.

Electrical

Rated Power Supply Voltage 100 to 240 V

Rated Frequency Range 50 to 60 Hz

Rated Current 0.5 to 0.3 A

Power Consumption (with USB Connection)

Specications

Approx. 3.9 kg (8.6 lb)

Standalone copying: Approx. 11 W (ISO/IEC24712)

Ready mode: Approx. 4.2 W

Sleep mode: Approx. 1.6 W

Power

Approx. 0.3 W

o:

Note:

❏ Check the label on the printer for its voltage.

Page 99

User's Guide

Appendix

Environmental Specications

Operation Use the printer within the range shown in the following graph.

Temperature: 10 to 35°C (50 to 95°F)

Humidity: 20 to 80% RH (without condensation)

Storage

* You can store for one month at 40°C (104°F).

Temperature: -20 to 40°C (-4 to 104°F)

Humidity: 5 to 85% RH (without condensation)

Environmental Specications for Ink Cartridges

Storage Temperature

Freezing Temperature -16 °C (3.2 °F)

* You can store for one month at 40 °C (104 °F).

-30 to 40 °C (-22 to 104 °F)

Ink thaws and is usable after approximately 3 hours at 25 °C (77 °F).

System Requirements

❏ Windows 8.1 (32-bit, 64-bit)/Windows 8 (32-bit, 64-bit)/Windows 7 (32-bit, 64-bit)/Windows Vista (32-bit, 64-

bit)/Windows XP Professional x64 Edition/Windows XP (32-bit)

❏ Mac OS X v10.9.x/Mac OS X v10.8.x/Mac OS X v10.7.x/Mac OS X v10.6.8

Note:

❏ Mac OS X may not support some applications and features.

❏ e UNIX File System (UFS) for Mac OS X is not supported.

Regulatory Information

Standards and Approvals for Australian Model

EMC AS/NZS CISPR22 Class B

Epson hereby declares that the following equipment Models are in compliance with the essential requirements and other relevant provisions of AS/NZS4268:

Page 100

User's Guide

Appendix

C462Q

Epson cannot accept responsibility for any failure to satisfy the protection requirements resulting from a nonrecommended modication of the products.

Restrictions on Copying

Observe the following restrictions to ensure the responsible and legal use of the printer.

Copying of the following items is prohibited by law:

❏ Bank bills, coins, government-issued marketable securities, government bond securities, and municipal

securities

❏ Unused postage stamps, pre-stamped postcards, and other ocial postal items bearing valid postage

❏ Government-issued revenue stamps, and securities issued according to legal procedure

Exercise caution when copying the following items:

❏ Private marketable securities (stock certicates, negotiable notes, checks, etc.), monthly passes, concession

tickets, etc.

❏ Passports, driver’s licenses, warrants of tness, road passes, food stamps, tickets, etc.

Note:

Copying these items may also be prohibited by law.

Responsible use of copyrighted materials:

Printers can be misused by improperly copying copyrighted materials. Unless acting on the advice of a knowledgeable attorney, be responsible and respectful by obtaining the permission of the copyright holder before copying published material.

Saving Power

printer enters sleep mode or turns o automatically if no operations are performed for a set period. You can

e adjust the time before power management is applied. Any increase will consider the environment before making any change.

Saving Power - Windows

Access the printer driver window.

2. Click Printer and Option Information on the Maintenance tab.

the printer's energy

aect

eciency.

Please

3. Select the time period before the printer enters sleep mode as the Sleep Timer setting, and click Send. To make the printer turn o automatically, select the time period as the Power O Timer setting, and click Send.

4. Click OK.

Saving Power - Mac OS X

1. Select System Preferences from the menu > Printers & Scanners (or Print & Scan, Print & Fax), and then select the printer.

100