Loading...
Wireless Installation Guide L395
Contents |
|
Wireless Installation Guide L395 ............................................................................................................... |
5 |
Using the Control Panel.............................................................................................................................. |
6 |
Control Panel Buttons and Lights ......................................................................................................... |
6 |
Adjusting Control Panel Position .......................................................................................................... |
7 |
Setting Up Your Product on a Wireless Network ...................................................................................... |
8 |
Setting Up Your Product with Wi-Fi Auto Connect................................................................................ |
9 |
Setting Up Your Product Using a Temporary USB Connection .......................................................... |
18 |
Solving Network Problems ....................................................................................................................... |
33 |
Product Cannot Connect to a Wireless Router or Access Point ......................................................... |
33 |
Network Software Cannot Find Product on a Network ....................................................................... |
34 |
Product Does Not Appear in Mac Printer Window .............................................................................. |
35 |
Cannot Print Over a Network.............................................................................................................. |
35 |
Cannot Scan Over a Network............................................................................................................. |
36 |
Notices ....................................................................................................................................................... |
38 |
Trademarks........................................................................................................................................ |
38 |
Copyright Notice................................................................................................................................. |
38 |
Copyright Attribution...................................................................................................................... |
39 |
3
Wireless Installation Guide L395
Welcome to the Wireless Installation Guide.
Before You Begin
Make sure you filled the ink tanks and loaded paper as described on the Start Here sheet. Then follow the instructions in this guide to set up the product for use on a wireless network.
5
Using the Control Panel
See these sections to learn about the control panel and select control panel settings.
Control Panel Buttons and Lights
Adjusting Control Panel Position
Control Panel Buttons and Lights
1The WiFi light
The left side of the WiFi light turns solid green when the product is connected to a wireless network and flashes when the product is communicating over a network. The right side flashes orange if a problem occurs with the product's wireless network connection. Both sides flash alternately or simultaneously while the product is setting up a connection with a wireless network.
2The 
power button and the 
power light
3The Wi-Fi button
4The 
network status button
5The 
B&W copy button
6The 
color copy button
7The 
stop button
8The 
ink light
9The 
paper light
6
10 Scan to PDF by pressing the 
B&W copy button and the 
color copy button simultaneously
Parent topic: Using the Control Panel
Adjusting Control Panel Position
You can adjust the position of the control panel to make it easier to use.
•To raise the control panel, lift it up from the bottom.
•To lower the control panel, squeeze the release bar and gently push the panel down.
Caution: Do not lower the control panel without first squeezing the release bar or you may damage your product.
Parent topic: Using the Control Panel
7
Setting Up Your Product on a Wireless Network
You can set up your product to communicate with your computer using a wireless router or access point. The wireless router or access point can be connected to your computer over a wireless or wired network.
1Epson product
2Wireless router or access point
3Computer with a wireless interface
4Computer
5Internet
6Ethernet cable (used only for wired connection to the wireless router or access point)
Setting Up Your Product with Wi-Fi Auto Connect
Setting Up Your Product Using a Temporary USB Connection
8
Setting Up Your Product with Wi-Fi Auto Connect
Your product broadcasts its network information for 60 minutes from the time ink charging begins. If you run the product's software setup package within this 60 minute period, the software automatically connects the product to your wireless network without you having to enter your network name (SSID) and password.
If it has been longer than 60 minutes since the product was first charged with ink, see the section on setting up your product using a temporary USB connection instead.
Note: If your computer does not have a CD/DVD drive or you are using a Mac, an Internet connection is required to obtain the product software.
1.Make sure your product is turned on but NOT CONNECTED to your computer with a USB cable.
Note: With Windows, if you see a Found New Hardware screen, click Cancel and disconnect the USB cable.
2.Insert the product CD or visit epson.com.jm/support and select your product to download the software package.
3.Select your language and click Next (Windows), or click Continue and click Continue again (Mac).
4.Accept the software license agreement to continue with software installation.
9
5.When you see one of these screens, click Install.
Windows
Mac
10
Note: On a Mac, make sure you install Software Updater to receive firmware and software updates for your product.
Software installation may take several minutes. Wait for the installation to complete.
6. Mac: If you see the following message, click Yes or No to continue.
7.When the Printer Setup screen appears, click Next (Windows) or Start (Mac) to begin setting up your product on your network.
11
8.When you see this screen, select Wireless connection and click Next (Windows) or Continue (Mac).
12
Loading...