Epson DTR-6016-500CD, DTR-6008-500CD User Manual

0 (0)

Operating Instructions

Digital Video Recorder Models: DTR-6008/250CD, DTR-6016/250CD, DTR-6008/500CD, DTR-6016/500CD, DTR-6008/750CD DTR-6016/750CD

Safety instructions

EMC class

This video recorder (DVR) is a class A device in accordance with EN 55022.

►

This device may cause interference to other equipment in domestic use. In such cases the persons opera-

►

ting the DVR are required to provide appropriate countermeasures, for which they themselves bear the cost.

Importance of these Operating Instructions

Please read the safety instructions and the other information contained in the Operating Instructions before

►

connecting up and operating the DVR.

The Operating Instructions should be kept in a safe place for later reference.

►

Ambient conditions for the DVR

The DVR should be protected against excessive heat, dust, damp and vibration.

►

The DVR may only be operated at temperatures between +5°C and +40°C, and up to a maximum air

►

humidity of 90%.

The DVR may only be operated indoors, and must be protected against incursion of water and damp.

►

Care of the DVR

Never switch on the DVR when damp has penetrated it. In such cases, have the DVR checked by a qualied

►

service engineer.

Do not place any heavy objects on the DVR.

►

Never cover over the DVR's vents.

►

Never insert metal objects or any other items into the vents. This may permanently damage the DVR.

►

The housing may only be opened by authorised persons. Repairs may only be carried out by qualied

►

service personnel.

The DVR must be disconnected from the power supply before its housing is opened.

►

Getting started with the DVR

When laying the connecting cables, make sure no weight is placed on them, that they are not kinked or

►

damaged, and that no damp can penetrate them.

Cleaning the DVR

The housing of the DVR may only be cleaned with a damp (not wet) cloth,

►

Use only a mild detergent. Do not use solvent-containing detergents or petrol. This could permanently

►

damage the surface nish.

Spare parts

Use only original spare parts from Videor Technical GmbH.►

DTR-60XX

Table of contents

Overview 7

Package contents Basic functions Features Requirements for operation

Control options Connections on the rear Front panel controls Key to controls 1

Function buttons 1

PTZ camera functions 10

Playback functions 1 Remote control functions 1

Playback functions 1 Menu overview 12 Accessing the menus 1

Accessing the Display menu 1

Accessing the PTZ menu 1

Accessing the Setup menu 1

Accessing the Search menu 1 Getting started 1

Checklist for DVR operation 1

Connecting the remote control and DVR 1

Switching on the DVR 1

Switching off the DVR Administration 1

Saving your system setup 1

Loading your system setup 1

Deleting recordings

Downloading software updates 1

Hiding from specic users 1

Restoring factory defaults 1

Mirroring of hard disks 2

Determining the memory requirement of a recording 2 Searching for recordings 2

Using calendar search 2

Using event log search 2

Using text-in search 2

Using motion search 2

Copying recordings 2

7 7 7 7 7 8 9 0 0

0 1 1

4 4 4 5 5 6 6 6 7

8 8 8

9 9 9 0 1 2 3 4 5 6 7

DTR-60XX

Table of contents

Menu descriptions – Setup menu 28

System – Information 2

System – Date/Time 3

System – Storage 3

System – User 3

System – Shutdown 3

System – Log out user1... 3

Network – Network 3

Network – Notication 3

Devices – Camera 3

Devices – Audio 3

Devices – Alarm-Out 4

Devices – Display 4

Devices – Remote Control 4

Record – Record 4

Record – Schedule 4

Record – Pre-Event 4

Record – Archive 4

Event – Alarm-In 4

Event – Motion Detection 4

Event – Video Loss 5

Event – Text-In 5

Event – System Event 5

Event – Event Status 5 WebGuard – WebWatch controls 5 WebGuard – WebSearch controls 5 Using WebGuard 6

Specications DTR-6008 6 Specications DTR-6016 6

Accessories 6 Supported PTZ cameras 6 Index 6 Notes on disposal 7

9 0 1 3 4 4 4 7 8 9 0 1 2 3 4 5 6 7 9 1 3 5 7 8 9 0 1 3 5 6 7 0

DTR-60XX

Overview

Package contents

●

Digital video recorder (DVR)

●

Mains power cord

●

Operating instructions

●

RAS (Remote Administration System) software on CD

●

Operating instructions for RAS software on paper and CD

●

Mounting kit for cabinet installation

●

Screws for attaching SCSI Connector

●

Mounting screws and guides for installation of hard disk drives

●

Infrared remote control

Basic functions

Record video images using multiple cameras

●

Even-based recording start

●

Video playback

●

Search for specic video sequences

●

Features

MPEG-4 compression / triplex mode

●

8 or 16 loop-through inputs / VGA, S-VHS/FBAS outputs

●

Audio and alarm inputs / outputs

●

Max. recording speed: 400 eld images per sec (PAL)

Memory capacity 250 GB / 500 GB / 750 GB

●

Maximum video resolution 720 x 576 pixels

●

SCSI port for archiving / memory expansion

●

Various recording criteria possible

●

Archiving/image transfer via USB and CD-RW

●

ATM/POS text display / 2x to 4x digital zoom

●

Telemetry control functions via RS-485 port

●

Network port (Ethernet) / IR remote control

●

Requirements for operation

●

Digital video recorder DTR connected At least 1 camera connected

●

At least 1 monitor connected

●

Mouse connected, if DVR is to be controlled by mouse

Control options

●

Front panel

●

Remote Control

●

Mouse

●

WebGuard

●

RAS program

DTR-60XX

Connections on the rear

Note: Connections optionally for NTSC or PAL operation.

1 2 3 4 5 6

SPOT 1 SPOT 2

1122334

VIDEO IN

LOOP

AUDIO IN 1 AUDIO IN 2 AUDIO IN 3 AUDIO IN 4 AUDIO OIT

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

889910101111121213131414151516

GND GND GND

GND

AI1 AI2 AI3 AI4 AI5 AI6 AI7 AI8

AI11AI10 AI12 AI13 AI14 AI15 AI16

AI9

AO3

14 13 11121819 17 1516 910 8 7

No. Designation Functions/connections Example devices

1 VIDEO IN 1-16 Max. 16 video channels Cameras

2 LOOP 1-16 Max. 16 loop-through video channels Cameras

3 SVHS OUT S-VHS output Monitors

4 VIDEO OUT Video output Monitors

5 SPOT1 - SPOT4 Max. 4 video outputs Spot monitors

6 RS-485 External interface Keyboard, PTZ camera

7 NETWORK Network Network cable

8 ARI/GND Reset alarm with external signal Switch

9 SCSI External storage media Hard disk

10 AO2 - AO16 Alarm outputs for external devices Siren, ashing light

11 VGA PC monitor PC monitor

12 NC, COM, NO Relay alarm output for external device Siren, ashing light

13 RS-232C

14 USB External interface Drive, mouse

15 Reset switch Reset to factory defaults -

16 AI1 - AI16 Alarm inputs for external devices Sensors

17 AUDIO OUT Audio output Amplier, speakers

AUDIO IN 1 18

- AUDIO IN 4

19 Power supply Mains power connection -

External interface Modem

Max. 4 Audio inputs Microphone

VIDEO OUT

SVHS OUT

AO8 AO12 GND

AO10AO9 AO11 AO13 AO14 AO15 AO16

GND

SPOT 3 SPOT 4

RS-485

ARIGNDNC COM NO AO2 AO4 AO5 AO6 AO7

NETWORKUSB RS-232C VGA SCSI

DTR-60XX

Front panel controls

The following diagram and table set out the controls on the front panel of the DVR:

1 32 4 5 6

192103114125136147158

DISPLAY

SEQUENCE

ALARM

CAMERA

SPOT

FREEZE

ZOOM

PTZ

HDD

NETWORK

POWER

14 13 1011 9 712 8

No. Designation Function

1 USB ports

2 Open built-in CD-RW writer

Select cameras

3 1 to 16

4 Menu navigation

5 PANIC

6 Shuttle ring

7 Jog dial

●

Enter passwords

●

Navigation and selection within the menu

Start/end panic recording

Innitely adjust playback speed

Change size of frame in picture-in-picture mode

●

Change numerical values in Setup menu

●

Frame-by-frame playback in Play mode

●

Playback functions (primary assignment)

PTZ camera functions (secondary assignment)

9 POWER Power-on indicator when DVR is in operation

10 NETWORK Indicates Ethernet or modem connection

11 HDD Indicates hard disk operation

DISPLAY, SEQUENCE, 12

FREEZE, SPOT, ZOOM,

Function buttons

PTZ

Reset alarm

ALARM

●

View event list

●

14 MENU Open/quit menu structure

PANIC

PLAY

/PAUSESEARCH

FFRW

RWARD

ARD

BACKW

JOG

DTR-60XX

Key to controls

Function buttons

Element Function

Change display mode

Sequence On/Off

Freeze On/Off

●

Copying recordings in Search menu by pressing and holding down button

●

Spot monitor assignments

PTZ camera functions On/Off

Zoom On/Off

PTZ camera functions

Element Function

Zoom in

Close-up

Wide-angle

Save preset

Load preset

Playback functions

Element Function

Select Search/Play function

●

Stop playback

●

Start/pause playback

Fast rewind

Fast forward

Frame-by-frame rewind

Frame-by-frame forward

DTR-60XX

Remote control functions

The following diagram and table set out the functions on the remote control:

No. Designation Function

Select System ID

SPOT

2 3 41

DISPLAY

FREEZE ALARM

SEQUENCE

CAMERA

BOOK MARK

TRIPLEX

AUDIO

SET

FOCUS PRESET

VIEW

MENU PTZ

PANIC

DIGITAL VIDEO RECORDER

Remote Controller

CLIP COPY

ZOOM

SPOT 1 - 4

2 ALARM

3 1 to 16

5 PTZ PTZ camera functions On/Off

6 ZOOM Zoom On/Off

8 PANIC Start/end panic recording

9 Menu navigation

10 MENU Open/quit menu structure

DISPLAY, SEQUENCE, FREEZE

Spot monitor assignments

Reset alarm

●

View event list

●

Select cameras

●

Enter passwords

●

PTZ camera functions

Playback functions

Navigation and selection within the menu

No function

Function buttons

Playback functions

Element Function

Select Search/Play function

●

Stop playback

●

Pause playback

Start playback

Fast rewind

Fast forward

Frame-by-frame rewind

Frame-by-frame forward

DTR-60XX

Menu overview

The following illustration shows the structure of the complete menu tree that is accessible using the mouse control:

Display Camera 1. CAM1

PIP Left-Top

2x2 3x3 4x4 Previous Group Next Group Edit Group Camera

Sequence Freeze Zoom... PTZ... Speed

Auto Pan Tour Pattern Device Menu Light Pump Wiper Power Aux. Move to Origin Spot Monitor... Toggle VGA... Exit PTZ

2. CAM2

3. CAM3

Left-Bottom Right-Top Right-Bottom Size 1/16 Size 1/9 Size 1/4

Spot Monitor... Exit Group Edit

Spot Monitor... Select Spot Monitor

Spot Monitor 1 Spot Monitor 2 Spot Monitor 3 Spot Monitor 4

DTR-60XX

Menu overview (continued)

The following illustration shows the structure of the complete menu tree that is accessible using the mouse control:

Setup Menu... System Information

Network Network

Devices Camera

Record Record

Event Alarm-In

Search Go to the First

Go to the Last Go to the Date/Time... Calendar Search... Event Log Search... Text-In Search… Motion Search... Clip-Copy... Print... Zoom... Slow Play x1

Date/Time Storage User Shutdown... Log out user1...

Notication

Audio Alarm-Out Display Remote Control

Schedule Pre-Event Archive

Motion Detection Video Loss Text-In System Event Event Status

x1/2 x1/3 x1/4 x1/6 x1/8

DTR-60XX

Data Source Record

Archive

Exit Search

Accessing the menus

Accessing the Display menu

Requirement:

The current camera image is shown in full image or quad image.

●

Step Action Access using

Device

1 Open Display menu...

Remote Control

Mouse Display

Key sequence/menu path

Access to submenu via Device/Remote Control

Submenu Camera image Key sequence

Change Display modes (PIP, 2x2, 3x3, 4x4)

Previous/Next Group Without frame

Edit Group With frames >

Change position of image-in-image Without frame

Change size of image-in-image Without frame Jog dial

Without frame

....

Accessing the PTZ menu

Requirement:

A PTZ camera is connected and congured.

●

Current camera image is shown as a full image.

●

Step Action Access using

Open PTZ menu...

Result: Menu of the congured PTZ

camera is shown.

Device >

Remote Control PTZ > MENU

Mouse PTZ...

Key sequence/menu path

DTR-60XX

Accessing the menus, continued

Accessing the Setup menu

Requirement:

The current camera image is shown in full image or quad image.

●

Step Action Access using

Open Setup Menu...

Result: Prompt for user name and password.

Note: Use default access data only for

rst-time access.

Device

Remote Control MENU

Mouse Setup Menu...

Key sequence/menu path

Accessing the Search menu

Requirement:

The current camera image is shown in full image or quad image.

●

Step Action Access using Key sequence/menu path

Open Search menu...

Result: Search for recorded images is activated.

Device >

Remote Control > MENU

Mouse Search

DTR-60XX

Getting started

Checklist for DVR operation

Step Action Menu path

1 Connect peripheral devices as per planned setup.

2 Specify menu language. Setup Menu... > System > Information

3 Adjust date and time. Setup Menu... > System > Date/Time

4 Set up user. Setup Menu... > System > User

6 Register peripherals with DVR. Setup Menu... > Devices > ...

7 Set up event types and associated responses. Setup Menu... > Event > ...

8 Set up recording parameters and schedule. Setup Menu... > Record > ...

Connecting the remote control and DVR

The remote control and DVR can be assigned an ID, because the ID of each DVR in the network must be unique. The DVR will then only respond to the remote control with the matching ID.

●

Step Action Menu path

1 Set DVR system ID. Setup Menu... > System > Information

3 Select relevant number on remote control.

Set up network and desired notication channels

(optional).

If the system ID in the DVR is 0, it will respond to the remote control regardless of the remote’s ID. If the system ID in the DVR is not 0, you must set the ID of the remote control identically.

Match remote control to system ID by pressing ID button on remote control.

Setup Menu... > Network > ...

DTR-60XX

Getting started (continued)

Switching on the DVR

Requirement:

The start-up preparations are complete.

●

Step Action

Switching off the DVR

Requirement:

●

Step Action Menu path

2 After shutdown, disconnect the mains plug.

Plug in DVR mains plug.

Switch on monitor.

Result: System starts up automatically and is ready to use.

You have accessed the Setup menu.

Shut down the system.

Result: System shuts down automatically.

Setup Menu... > System > Shutdown...

DTR-60XX

Administration

Saving your system setup

You can save your DVR’s setup data, including its network conguration.

Requirement:

USB memory stick

●

Step Action Menu path

2 Export your setup.

3 Specify a le name.

4 Export your setup. Export

Loading your system setup

You can load your stored DVR system setup with or without its network conguration.

Requirement:

●

Step Action Menu path

2 Import your setup.

4 Import your setup. Import

Insert a USB memory stick into one of the USB ports.

Setup Menu... > System > Information > Setup > Export...

USB memory stick with stored setup

Insert a USB memory stick into one of the USB ports.

Setup Menu... > System > Information > Setup > Import...

Select the le name and, where appropriate, the network conguration.

Deleting recordings

You can only delete all your recordings together. It is not possible to delete recordings from a specic time

period.

Step Action Menu path

Setup Menu... > System > Information > Clear All Data...

Delete all recordings.

or Setup Menu... > System > Storage > Information >

Information > In Use > Clear

DTR-60XX

Administration (continued)

Downloading software updates

You can download software updates for your DVR from a USB memory stick.

Requirement:

USB memory stick with latest software release

●

Step Action Menu path

2 Start update. Setup Menu... > System > Information > Upgrade...

3 Install new release.

Hiding from specic users

You can hide video images and camera data according to the preset user rights.

Step Action Menu path

1 Set camera Covert mode. Setup Menu... > Devices > Camera > Settings

Restoring factory defaults

Before restoring the factory defaults, you should export your current system settings in case you need to reimport them later. (see Saving your system setup and Loading your system setup)

Step Action

1 Shut down the system.

2 Disconnect the mains plug.

3 Push a paper clip into the Reset button (on the rear of the DVR) and hold it there.

4 Plug in the mains plug.

5 Wait for all the LEDs to ash 5 times (about 30 seconds).

6 Withdraw the paper clip.

Insert a USB memory stick into one of the USB ports.

Cancel ‘Covert Camera View' access for

specic users (groups).

Setup Menu... > System > User

DTR-60XX

Administration (continued)

Mirroring of hard disks

Mirroring of hard disks prevents the loss of records in the event of a hard disk defect.

Requirements:

The Digital Video Recorder has at least 2 or 3 hard disks installed

●

The destination hard disk is identical to the source hard disk in type and memory capacity

●

The source-hard disk and the destination hard disk are not used for archiving records.

●

Step Action Menu path

1 Formatting the source hard disk for recording.

2 Select the source hard disk.

3 Select the destination hard disk.

Start Mirroring.

Results:

The source hard disk and destination hard disk are

6 Continuing Mirroring - see Starting Mirroring. Start...

●

synchronised (approx. 40 minutes for 10 GB).

All data on the destination hard disk are deleted.●

All records are written to both hard disks.●

Interrupting Mirroring.

Results:

The status of the destination hard is set to:● Don't use

The hard disk can now only be used for searching

●

for records.

If the hard disk is to be used for records or archiving,

● Setup Menu... > System > Storage> it must be formatted.

Setup Menu... > System > Storage> Information > Format > Record

Setup Menu... > System > Storage> Information > Mirror 1/2 > Source

Setup Menu... > System > Storage> Information > Mirror 1/2 > Dest.

Start...

Stop...

Information > Format > Format

DTR-60XX

Administration (continued)

Determining the memory requirement of a recording

The amount of memory recorded video sequences will take up depends on the following factors:

●

Picture quality number of images per second

●

duration

●

The memory requirement is calculated by this formula:

Memory requirement = picture size x duration of recording x images per second

Calculation example: CIF resolution (PAL):

Picture quality

Basic 2.4 kB 24 hours 1.04 GB 2.07 GB 5.18 GB

Standard 4.8 kB 24 hours 2.07 GB 4.15 GB 10.37 GB

High 9.6 kB 24 hours 4.15 GB 8.29 GB 20.74 GB

Very High 14.4 kB 24 hours 6.22 GB 12.44 GB 31.10 GB

2Calculation example: 2CIF resolution (PAL):

Picture quality

Basic 4.8 kB 24 hours 2.07 GB 4.15 GB 10.37 GB

Standard 9.6 kB 24 hours 4.15 GB 8.29 GB 20.74 GB

High 19.2 kB 24 hours 8.29 GB 16.59 GB 41.47 GB

Very High 28.8 kB 24 hours 12.44 GB 24.88 GB 62.20 GB

Picture size

Duration of recording

Approx. memory space

5 images/s 10 images/s 25 images/s

Approx. memory space

5 images/s 10 images/s 25 images/s

DTR-60XX

Searching for recordings

Find rst stored recording

Find last stored recording

Find recording by date and time

Calendar search

For each camera the calendar search indicates:

the days from which there are recordings

●

the time ranges of recordings on those days

●

Event log search

The event log search enables you to search for events based on specic criteria, such as:

movements recorded by a specic camera

● alarm from a specic alarm input

●

System events

●

Go to the First

Go to the Last

Go to the Date/Time...

Calendar Search...

Event Log Search...

Text-in search

The text-in search enables you to search for recordings based on specic text inputs.

Text-In Search…

Motion search

The motion search function can detect movements in recordings within dened zones for one camera. 2 types

of motion search are possible:

Motion search: Search for movement in a dened zone.

● Museum search: Search for movement of a dened object.

●

Motion Search...

Copying recordings

Recordings can be written to a CD or copied to a USB memory stick.

Clip-Copy...

DTR-60XX

+ 50 hidden pages