Endress+Hauser NRF81 Operating Manual

BA01465G/00/EN/04.18 71410291 2018-07-13

01.03.zz (Device firmware)

Products Solutions Services

Operating Instructions

Tankside Monitor NRF81

Tank Gauging

Tankside Monitor NRF81

Order code:

Ext. ord. cd.:

Ser. no.:

www.endress.com/deviceviewer

Endress+Hauser Operations App

XXXXXXXXXXXX

XXXXX-XXXXXX

XXX.XXXX.XX

Serial number

A0023555

2 Endress+Hauser

Tankside Monitor NRF81 Table of contents

1 About this document ................ 4

1.1 Document function ..................... 4

1.2 Symbols .............................. 4

1.3 Documentation ........................ 7

1.4 Registered trademarks ................... 9

2 Basic safety instructions ........... 10

2.1 Requirements for the personnel ........... 10

2.2 Designated use ....................... 10

2.3 Workplace safety ...................... 10

2.4 Operational safety ..................... 11

2.5 Product safety ........................ 11

3 Product description ................ 12

3.1 Product design ........................ 12

4 Incoming acceptance and product

identification ..................... 13

4.1 Incoming acceptance ................... 13

4.2 Product identification .................. 13

4.3 Storage and transport .................. 15

5 Installation ....................... 16

5.1 Installation conditions .................. 16

5.2 Post-installation check .................. 17

6 Electrical connection .............. 18

6.1 Terminal assignment ................... 18

6.2 Connecting requirements ................ 34

6.3 Ensuring the degree of protection .......... 35

6.4 Post-connection check .................. 35

7 Operability ........................ 36

7.1 Overview of the operation options ......... 36

7.2 Structure and function of the operating

menu .............................. 37

7.3 Access to the operating menu via the local or

remote display and operating module. ...... 38

7.4 Access to the operating menu via the service

interface and FieldCare ................. 50

7.5 Access to the operating menu via Tankvision

Tank Scanner NXA820 and FieldCare ....... 51

8 System integration ................ 54

8.1 Overview of the Device Description files

(DTM) .............................. 54

9.2 Configuring the tank gauging application .... 57

9.3 Advanced settings ..................... 83

9.4 Simulation ........................... 83

9.5 Protecting settings from unauthorized

access .............................. 83

10 Operation ......................... 84

10.1 Reading off the device locking status ....... 84

10.2 Reading off measured values ............. 84

11 Diagnostics and troubleshooting ... 85

11.1 General trouble shooting ................ 85

11.2 Diagnostic information on local display ...... 86

11.3 Diagnostic information in FieldCare ........ 89

11.4 Overview of the diagnostic messages ....... 91

11.5 Diagnostic list ........................ 97

11.6 Reset measuring device ................. 98

11.7 Device information .................... 98

11.8 Firmware history ...................... 98

12 Maintenance ...................... 99

12.1 Maintenance tasks ..................... 99

12.2 Endress+Hauser services ................ 99

13 Repair ........................... 100

13.1 General information on repairs ........... 100

13.2 Spare parts ......................... 100

13.3 Endress+Hauser services ............... 101

13.4 Return ............................. 101

13.5 Disposal ........................... 101

14 Accessories ...................... 102

14.1 Device-specific accessories .............. 102

14.2 Communication-specific accessories ....... 103

14.3 Service-specific accessories .............. 103

14.4 System components ................... 103

15 Operating menu .................. 104

15.1 Overview of the operating menu .......... 104

15.2 "Operation" menu ..................... 112

15.3 "Setup" menu ........................ 121

15.4 "Diagnostics" menu .................... 236

Index ................................. 245

9 Commissioning .................... 55

9.1 Initial settings ........................ 55

Endress+Hauser 3

About this document Tankside Monitor NRF81

DANGER

WARNING

CAUTION

NOTICE

1 About this document

1.1 Document function

These Operating Instructions contain all the information that is required in various phases of the life cycle of the device: from product identification, incoming acceptance and storage, to mounting, connection, operation and commissioning through to troubleshooting, maintenance and disposal.

1.2 Symbols

1.2.1 Safety symbols

Symbol Meaning

DANGER!

This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in serious or fatal injury.

WARNING!

This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in serious or fatal injury.

CAUTION!

This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in minor or medium injury.

NOTE!

This symbol contains information on procedures and other facts which do not result in personal injury.

1.2.2 Electrical symbols

Symbol Meaning

Direct current

Alternating current

Direct current and alternating current

Ground connection

A grounded terminal which, as far as the operator is concerned, is grounded via a grounding system.

Protective ground connection

A terminal which must be connected to ground prior to establishing any other connections.

Equipotential connection

A connection that has to be connected to the plant grounding system: This may be a potential equalization line or a star grounding system depending on national or company codes of practice.

4 Endress+Hauser

Tankside Monitor NRF81 About this document

1.2.3 Tool symbols

Symbol Meaning

Torx screwdriver

A0013442

Flat blade screwdriver

A0011220

Cross-head screwdriver

A0011219

Allen key

A0011221

Hexagon wrench

A0011222

1.2.4 Symbols for certain types of information

Symbol Meaning

Permitted

Procedures, processes or actions that are permitted.

Preferred

Procedures, processes or actions that are preferred.

Forbidden

Procedures, processes or actions that are forbidden.

Tip

Indicates additional information.

Reference to documentation

Reference to page

Reference to graphic

Notice or individual step to be observed

, 2., 3.… Series of steps

Result of a step

Help in the event of a problem

Visual inspection

1.2.5 Symbols in graphics

Symbol Meaning

1, 2, 3 ... Item numbers

, 2., 3.… Series of steps

A, B, C, ... Views

A-A, B-B, C-C, ... Sections

Endress+Hauser 5

About this document Tankside Monitor NRF81

Symbol Meaning

Hazardous area

Indicates a hazardous area.

Safe area (non-hazardous area)

Indicates the non-hazardous area.

1.2.6 Symbols at the device

Symbol Meaning

Safety instructions

Observe the safety instructions contained in the associated Operating Instructions.

Temperature resistance of the connection cables

Specifies the minimum value of the temperature resistance of the connection cables.

6 Endress+Hauser

Tankside Monitor NRF81 About this document

1.3 Documentation

For an overview of the scope of the associated Technical Documentation, refer to the following:

• The W@M Device Viewer : Enter the serial number from the nameplate (www.endress.com/deviceviewer)

• The Endress+Hauser Operations App: Enter the serial number from the nameplate or scan the 2-D matrix code (QR code) on the nameplate.

1.3.1 Technical Information (TI)

The Technical Information contains all the technical data on the device and provides an overview of the accessories and other products that can be ordered for the device.

Device Technical Information

Tankside Monitor NRF81 TI01251G

1.3.2 Brief Operating Instructions (KA)

The Brief Operating Instructions contain all the essential information from incoming acceptance to initial commissioning.

Device Brief Operating Instructions

Tankside Monitor NRF81 KA01209G

1.3.3 Operating Instructions (BA)

The Operating Instructions contain all the information that is required in various phases of the life cycle of the device: from product identification, incoming acceptance and storage, to mounting, connection, operation and commissioning through to troubleshooting, maintenance and disposal.

It also contains a detailed explanation of each individual parameter in the operating menu (except the Expert menu). The description is aimed at those who work with the device over the entire life cycle and perform specific configurations.

Device Operating Instructions

Tankside Monitor NRF81 BA01465G

1.3.4 Description of Device Parameters (GP)

The Description of Device Parameters provides a detailed explanation of each individual parameter in the 2nd part of the operating menu: the Expert menu. It contains all the device parameters and allows direct access to the parameters by entering a specific code. The description is aimed at those who work with the device over the entire life cycle and perform specific configurations.

Device Description of Device Parameters

Tankside Monitor NRF81 GP01083G

Endress+Hauser 7

About this document Tankside Monitor NRF81

1.3.5 Safety instructions (XA)

Ordering feature 010 "Approval" Meaning XA

BA ATEX II 2 (1)G Ex db [ia Ga] IIC T6 Gb XA01531G

FD FM C/US XP-AIS Cl.I Div.1 Gr.BCD T6

AEx d[ia] IIC T6

GA EAC Ex db[ia Ga] IIC T6 Gb XA01701G

IA IEC Ex db [ia Ga] IIC T6 Gb XA01531G

KA KC Ex db[ia Ga] IIC T6 Gb in preparation

MA INMETRO Ex db[ia Ga] IIC T6 Gb in preparation

NA NEPSI Ex db[ia Ga] IIC T6 Gb XA01752G

TA TIIS Ex d[ia] IIC T6 Ga/Gb in preparation

XA01532G

8 Endress+Hauser

Tankside Monitor NRF81 About this document

1.4 Registered trademarks

FieldCare

Registered trademark of the Endress+Hauser Process Solutions AG, Reinach, Switzerland

MODBUS

Registered trademark of the MODBUS-IDA, Hopkinton, MA, USA

Endress+Hauser 9

Basic safety instructions Tankside Monitor NRF81

2 Basic safety instructions

2.1 Requirements for the personnel

The personnel for installation, commissioning, diagnostics and maintenance must fulfill the following requirements:

Trained, qualified specialists must have a relevant qualification for this specific function

‣

and task. Are authorized by the plant owner/operator.

‣

Are familiar with federal/national regulations.

‣

Before starting work, read and understand the instructions in the manual and

‣

supplementary documentation as well as the certificates (depending on the application). Follow instructions and comply with basic conditions.

‣

The operating personnel must fulfill the following requirements:

Are instructed and authorized according to the requirements of the task by the facility's

‣

owner-operator. Follow the instructions in this manual.

‣

2.2 Designated use

Application and measured materials

The device described in these Operating Instructions is a monitoring unit for use with the Endress+Hauser Micropilot M and Micropilot S-series radars and other HART compatible devices. Mounted at the tank side, it provides indication of measured data, allows configuration and supplies intrinsically safe (i.s.) or explosion proof (XP) power to the connected sensors on the tank. Various industry standard digital gauging communication protocols support integration into open architecture tank gauging and inventory systems.

Measuring devices for use in hazardous areas, in hygienic applications or in applications where there is an increased risk due to process pressure, are labeled accordingly on the nameplate.

To ensure that the measuring device remains in proper condition for the operation time:

Only use the measuring device in full compliance with the data on the nameplate and

‣

the general conditions listed in the Operating Instructions and supplementary documentation. Check the nameplate to verify if the device ordered can be put to its intended use in the

‣

approval-related area (e.g. explosion protection, pressure vessel safety). If the measuring device is not operated at atmospheric temperature, compliance with

‣

the relevant basic conditions specified in the associated device documentation is absolutely essential. Protect the measuring device permanently against corrosion from environmental

‣

influences. Observe the limit values in the "Technical Information".

‣

The manufacturer is not liable for damage caused by improper or non-designated use.

2.3 Workplace safety

For work on and with the device:

Wear the required personal protective equipment according to federal/national

‣

regulations.

10 Endress+Hauser

Tankside Monitor NRF81 Basic safety instructions

2.4 Operational safety

Risk of injury.

Operate the device in proper technical condition and fail-safe condition only.

‣

The operator is responsible for interference-free operation of the device.

‣

Conversions to the device

Unauthorized modifications to the device are not permitted and can lead to unforeseeable dangers.

If, despite this, modifications are required, consult with the manufacturer.

‣

Repair

To ensure continued operational safety and reliability,

Carry out repairs on the device only if they are expressly permitted.

‣

Observe federal/national regulations pertaining to repair of an electrical device.

‣

Use original spare parts and accessories from the manufacturer only.

‣

Hazardous area

To eliminate a danger for persons or for the facility when the device is used in the hazardous area (e.g. explosion protection, pressure vessel safety):

Based on the nameplate, check whether the ordered device is permitted for the

‣

intended use in the hazardous area. Observe the specifications in the separate supplementary documentation that is an

‣

integral part of these Instructions.

2.5 Product safety

This measuring device is designed in accordance with good engineering practice to meet state-of-the-art safety requirements, has been tested, and left the factory in a condition in which it is safe to operate. It meets general safety standards and legal requirements.

2.5.1 CE mark

The measuring system meets the legal requirements of the applicable EC guidelines. These are listed in the corresponding EC Declaration of Conformity together with the standards applied.

Endress+Hauser confirms successful testing of the device by affixing to it the CE mark.

Endress+Hauser 11

Product description Tankside Monitor NRF81

3 Product description

3.1 Product design

A0027767

 1 Design of Tankside Monitor NRF81

1 Housing 2 Display and operating module (can be operated without opening the cover) 3 Mounting plate for wall or pipe mounting

12 Endress+Hauser

Tankside Monitor NRF81 Incoming acceptance and product identification

4 Incoming acceptance and product

identification

4.1 Incoming acceptance

Upon receipt of the goods check the following:

• Are the order codes on the delivery note and the product sticker identical?

• Are the goods undamaged?

• Do the nameplate data match the ordering information on the delivery note?

• If required (see nameplate): Are the Safety Instructions (XA) enclosed?

If one of these conditions is not satisfied, contact your Endress+Hauser Sales Center.

4.2 Product identification

The following options are available for identification of the measuring device:

• Nameplate specifications

• Extended order code with breakdown of the device features on the delivery note

• Enter serial numbers from nameplates in W@M Device Viewer ( www.endress.com/deviceviewer ): All information about the measuring device is displayed.

• Enter the serial number from the nameplates into the Endress+Hauser Operations App or scan the 2-D matrix code (QR code) on the nameplate with the Endress+Hauser Operations App: all the information for the measuring device is displayed.

For an overview of the scope of the associated Technical Documentation, refer to the following:

• The W@M Device Viewer: Enter the serial number from the nameplate (www.endress.com/deviceviewer)

• The Endress+Hauser Operations App: Enter the serial number from the nameplate or scan the 2-D matrix code (QR code) on the nameplate.

Endress+Hauser 13

Incoming acceptance and product identification Tankside Monitor NRF81

Ext. ord. cd.:

Order code: Ser. no.:

Tp max.:

Mat.:

Date:

FW:

Dev.Rev.:

ex works

DeviceID:

Ta:

if modification see sep. label

X =

MWP:

Tank ID: Tank ref.height:

Density range:

Kg/m³

4.2.1 Nameplate

A0027791

 2 Nameplate

1 Manufacturer address 2 Device name 3 Order code 4 Serial number 5 Extended order code 6 Supply voltage 7 Maximum process pressure 8 Maximum process temperature 9 Permitted ambient temperature (Ta)

10 Temperature resistance of cable 11 Thread for cable entry 12 Material in contact with process 13 Device ID 14 Firmware version 15 Device revision 16 Metrology certification numbers 17 Customized parametrization data 18 Ambient temperature range 19 CE mark / C-tick mark 20 Additional information on the device version 21 Ingress protection 22 Certificate symbol 23 Data concerning the Ex approval 24 General certificate of approval 25 Associated Safety Instructions (XA) 26 Manufacturing date 27 RoHS mark 28 QR code for the Endress+Hauser Operations App

4.2.2 Manufacturer address

Endress+Hauser SE+Co. KG Hauptstraße 1 79689 Maulburg, Germany

Address of the manufacturing plant: See nameplate.

14 Endress+Hauser

Tankside Monitor NRF81 Incoming acceptance and product identification

4.3 Storage and transport

4.3.1 Storage conditions

• Storage temperature: –50 to +80 °C (–58 to +176 °F)

• Store the device in its original packaging.

4.3.2 Transport

NOTICE

Risk of injury

Transport the measuring device to the measuring point in its original packaging.

‣

Take into account the mass center of the device in order to avoid unintended tilting.

‣

Comply with the safety instructions, transport conditions for devices over 18kg

‣

(39.6lbs) (IEC61010).

Endress+Hauser 15

Installation Tankside Monitor NRF81

150 (5.9)

13.5 (0.53)

M12

≤15 Nm (11.06 lbf ")

5 Installation

5.1 Installation conditions

5.1.1 Wall mounting

 3 Wall mounting of the Tankside Monitor

5.1.2 Pipe mounting

Ordering feature 620 "Accessory enclosed" Mounting kit

PV Mounting kit, pipe, DN32-50 (1-1/4" - 2")

PW Mounting kit, pipe, DN80 (3")

 4 Mounting of the Tankside Monitor at a vertical pipe

A0029901

A0029899

16 Endress+Hauser

Tankside Monitor NRF81 Installation

≤15 Nm (11.06 lbf ")

A0029900

 5 Mounting of the Tankside Monitor at a horizontal pipe

5.2 Post-installation check

Is the device undamaged (visual inspection)?

Does the device conform to the measuring point specifications?

For example:

• Process temperature

• Process pressure (refer to the chapter on "Material load curves" of the "Technical Information" document)

• Ambient temperature range

• Measuring range

Are the measuring point identification and labeling correct (visual inspection)?

Is the device adequately protected from precipitation and direct sunlight?

Endress+Hauser 17

Electrical connection Tankside Monitor NRF81

1 3

2 4

CDI

SIM

22334

112233445566778

1 3

2 4

CDI

SIM

22334

112233445566778

POWER

G1 N G3 L

AC 85...264 V

6 Electrical connection

6.1 Terminal assignment

 6 Terminal compartment (typical example) and ground terminals

Terminal area Module

Up to four I/O modules, depending on the order code

A/B/C/D (slots for I/O modules)

• Modules with four terminals can be in any of these slots.

• Modules with eight terminals can be in slot B or C.

The exact assignment of the modules to the slots is dependent on the device version



→  21.

E HART Ex i/IS interface

• E1: H+

• E2: H-

F Remote display

• F1: VCC (connect to terminal 81 of the remote display)

• F2: Signal B (connect to terminal 84 of the remote display)

• F3: Signal A (connec t to terminal 83 of the remote display)

• F4: Gnd (connect to terminal 82 of the remote display)

Power supply: 85 to 264 V

• G1: N

• G2: not connected

• G3: L

Protective ground connection (M4 screw)

A0018339

A0027362

18 Endress+Hauser

Tankside Monitor NRF81 Electrical connection

1 3

2 4

CDI

SIM

22334

112233445566778

POWER

1 3

2 4

CDI

WP SIM

POWER

Vcc

Gnd

A B

1 3

2 4

CDI

SIM

22334

112233445566778

POWER

1 3 2 4

Vcc

Gnd

81 82 83 84

F1 F2 F3 F4

6.1.1 Power supply

A0033413

G1 N G2 not connected G3 L 4 Green LED: indicates power supply

Supply voltage

85 to 264 VAC, 50/60 Hz, 28.8 VA

The supply voltage is also indicated on the nameplate.

6.1.2 Remote display and operating module DKX001

 7 Connection of the remote display and operating module DKX001 to the Tank Gauging device (NMR8x,

NMS8x or NRF8x)

1 Remote display and operating module 2 Connecting cable 3 Tank Gauging device (NMR8x, NMS8x or NRF8x)

A0037025

The remote display and operating module DKX001 is available as an accessory. For details refer to SD01763D.

• The measured value is indicated on the DKX001 and on the local display and operating module simulataneously.

• The operating menu cannot be accessed on both modules at the same time. If the

1) maximum value; actual value depending on modules installed. 28.8 VA includes the nominal power, and the cabling specification has to meet

Endress+Hauser 19

this value. On the other hand, the effective power consumption is 12 W.

operating menu is entered in one of these modules, the other module is automatically locked. This locking remains active until the menu is closed in the first module (back to measured value display).

Electrical connection Tankside Monitor NRF81

1 3

2 4

CDI

SIM

22334

112233445566778

CDI

POWER

6.1.3 HART Ex i/IS interface

A0033414

E1 H+ E2 H3 Orange LED: indicates data communication

This interface always operates as the main HART master for connected HART slave transmitters. The Analog I/O modules, on the other hand, can be configured as a HART master or slave →  28 →  30.

20 Endress+Hauser

Tankside Monitor NRF81 Electrical connection

6.1.4 Slots for I/O modules

The terminal compartment contains four slots (A, B, C and D) for I/O modules. Depending on the device version (ordering features 040, 050 and 060) these slots contain different I/O modules. The table below shows which module is located in which slot for a specific device version.

The slot assignment for the device is also indicated on a label attached to the back cover of the display module.

A0030069

1 Label showing (among other things) the modules in the slots A to D. A Cable entry for slot A B Cable entry for slot B C Cable entry for slot C D Cable entry for slot D

Endress+Hauser 21

Electrical connection Tankside Monitor NRF81

NRF81 - XX XX XXxxxx ...

060050040

"Primary Output" (040) = "Modbus" (A1)

Ordering feature

040

Primary

Output

A1 X0 X0 Modbus - - -

A1 X0 A1 Modbus - - Digital

A1 X0 A2 Modbus - Digital Digital

A1 X0 A3 Modbus Digital Digital Digital

A1 X0 B1 Modbus Modbus - -

A1 X0 B2 Modbus Modbus - Digital

A1 X0 B3 Modbus Modbus Digital Digital

A1 A1 X0 Modbus Analog Ex d/XP - -

A1 A1 A1 Modbus Analog Ex d/XP - Digital

A1 A1 A2 Modbus Analog Ex d/XP Digital Digital

A1 A1 B1 Modbus Modbus Analog Ex d/XP -

A1 A1 B2 Modbus Modbus Analog Ex d/XP Digital

A1 A2 X0 Modbus Analog Ex d/XP Analog Ex d/XP -

A1 A2 A1 Modbus Analog Ex d/XP Analog Ex d/XP Digital

A1 A2 B1 Modbus Analog Ex d/XP Analog Ex d/XP Modbus

A1 B1 X0 Modbus Analog Ex i/IS - -

A1 B1 A1 Modbus Analog Ex i/IS - Digital

A1 B1 A2 Modbus Analog Ex i/IS Digital Digital

A1 B1 B1 Modbus Modbus Analog Ex i/IS -

A1 B1 B2 Modbus Modbus Analog Ex i/IS Digital

A1 B2 X0 Modbus Analog Ex i/IS Analog Ex i/IS -

A1 B2 A1 Modbus Analog Ex i/IS Analog Ex i/IS Digital

A1 B2 B1 Modbus Analog Ex i/IS Analog Ex i/IS Modbus

A1 C2 X0 Modbus Analog Ex i/IS Analog Ex d/XP -

A1 C2 A1 Modbus Analog Ex i/IS Analog Ex d/XP Digital

A1 C2 B1 Modbus Analog Ex i/IS Analog Ex d/XP Modbus

050 Secondary IO Analog

060

Secondary

IO Digital

Ex d/XP

Terminal area

A0023888

22 Endress+Hauser

Tankside Monitor NRF81 Electrical connection

NRF81 - XX XX XXxxxx ...

060050040

"Primary Output" (040) = "V1" (B1)

Ordering feature

040

Primary

Output

B1 X0 X0 V1 - - -

B1 X0 A1 V1 - - Digital

B1 X0 A2 V1 - Digital Digital

B1 X0 A3 V1 Digital Digital Digital

B1 X0 B1 V1 Modbus - -

B1 X0 B2 V1 Modbus - Digital

B1 X0 B3 V1 Modbus Digital Digital

B1 A1 X0 V1 Analog Ex d/XP - -

B1 A1 A1 V1 Analog Ex d/XP - Digital

B1 A1 A2 V1 Analog Ex d/XP Digital Digital

B1 A1 B1 V1 Modbus Analog Ex d/XP -

B1 A1 B2 V1 Modbus Analog Ex d/XP Digital

B1 A2 X0 V1 Analog Ex d/XP Analog Ex d/XP -

B1 A2 A1 V1 Analog Ex d/XP Analog Ex d/XP Digital

B1 A2 B1 V1 Analog Ex d/XP Analog Ex d/XP Modbus

B1 B1 X0 V1 Analog Ex i/IS - -

B1 B1 A1 V1 Analog Ex i/IS - Digital

B1 B1 A2 V1 Analog Ex i/IS Digital Digital

B1 B1 B1 V1 Modbus Analog Ex i/IS -

B1 B1 B2 V1 Modbus Analog Ex i/IS Digital

B1 B2 X0 V1 Analog Ex i/IS Analog Ex i/IS -

B1 B2 A1 V1 Analog Ex i/IS Analog Ex i/IS Digital

B1 B2 B1 V1 Analog Ex i/IS Analog Ex i/IS Modbus

B1 C2 X0 V1 Analog Ex i/IS Analog Ex d/XP -

B1 C2 A1 V1 Analog Ex i/IS Analog Ex d/XP Digital

B1 C2 B1 V1 Analog Ex i/IS Analog Ex d/XP Modbus

050 Secondary IO Analog

060

Secondary

IO Digital

Ex d/XP

Terminal area

A0023888

Endress+Hauser 23

Electrical connection Tankside Monitor NRF81

NRF81 - XX XX XXxxxx ...

060050040

"Primary Output" (040) = "4-20mA HART Ex d" (E1)

Ordering feature

040

Primary

Output

E1 X0 X0 - Analog Ex d/XP - -

E1 X0 A1 - Analog Ex d/XP - Digital

E1 X0 A2 - Analog Ex d/XP Digital Digital

E1 X0 A3 Digital Analog Ex d/XP Digital Digital

E1 X0 B1 Modbus Analog Ex d/XP - -

E1 X0 B2 Modbus Analog Ex d/XP - Digital

E1 X0 B3 Modbus Analog Ex d/XP Digital Digital

E1 A1 X0 - Analog Ex d/XP Analog Ex d/XP -

E1 A1 A1 - Analog Ex d/XP Analog Ex d/XP Digital

E1 A1 A2 Digital Analog Ex d/XP Analog Ex d/XP Digital

E1 A1 B1 Modbus Analog Ex d/XP Analog Ex d/XP -

E1 A1 B2 Modbus Analog Ex d/XP Analog Ex d/XP Digital

E1 B1 X0 - Analog Ex d/XP Analog Ex i/IS -

E1 B1 A1 - Analog Ex d/XP Analog Ex i/IS Digital

E1 B1 A2 Digital Analog Ex d/XP Analog Ex i/IS Digital

E1 B1 B1 Modbus Analog Ex d/XP Analog Ex i/IS -

E1 B1 B2 Modbus Analog Ex d/XP Analog Ex i/IS Digital

050 Secondary IO Analog

060

Secondary

IO Digital

Ex d/XP

Terminal area

A0023888

24 Endress+Hauser

Tankside Monitor NRF81 Electrical connection

NRF81 - XX XX XXxxxx ...

060050040

"Primary Output" (040) = "4-20mA HART Ex i" (H1)

Ordering feature

040

Primary

Output

H1 X0 X0 - Analog Ex i/IS - -

H1 X0 A1 - Analog Ex i/IS - Digital

H1 X0 A2 - Analog Ex i/IS Digital Digital

H1 X0 A3 Digital Analog Ex i/IS Digital Digital

H1 X0 B1 Modbus Analog Ex i/IS - -

H1 X0 B2 Modbus Analog Ex i/IS - Digital

H1 X0 B3 Modbus Analog Ex i/IS Digital Digital

H1 A1 X0 - Analog Ex i/IS Analog Ex d/XP -

H1 A1 A1 - Analog Ex i/IS Analog Ex d/XP Digital

H1 A1 A2 Digital Analog Ex i/IS Analog Ex d/XP Digital

H1 A1 B1 Modbus Analog Ex i/IS Analog Ex d/XP -

H1 A1 B2 Modbus Analog Ex i/IS Analog Ex d/XP Digital

H1 B1 X0 - Analog Ex i/IS Analog Ex i/IS -

H1 B1 A1 - Analog Ex i/IS Analog Ex i/IS Digital

H1 B1 A2 Digital Analog Ex i/IS Analog Ex i/IS Digital

H1 B1 B1 Modbus Analog Ex i/IS Analog Ex i/IS -

H1 B1 B2 Modbus Analog Ex i/IS Analog Ex i/IS Digital

050 Secondary IO Analog

060

Secondary

IO Digital

Ex d/XP

Terminal area

A0023888

Endress+Hauser 25

Electrical connection Tankside Monitor NRF81

1 3

2 4

SIM

23344

112233445566778

1 2 3 4

A1-4

2 3 4

D1-4

6.1.5 Terminals of the "Modbus" or "V1" module

A0031200

 8 Designation of the "Modbus" or "V1" modules (examples); depending on the device version these modules

may also be in slot B or C.

Depending on the device version, the "Modbus" and/or "V1" module may be in different slots of the terminal compartment. In the operating menu the "Modbus" and "V1" interfaces are designated by the respective slot and the terminals within this slot: A1-4, B1-4, C1-4, D1-4.

Terminals of the "Modbus" module

Terminal

X1 S Cable shielding connected via a capacitor to EARTH

X2 0V Common reference

X3 B- Non-inverting signal line

X4 A+ Inverting signal line

Designation of the module in the operating menu: Modbus X1-4; (X = A, B, C or D)

1) In this column, "X" stands for one of the slots "A", "B", "C", or "D".

Name Description

Terminals of the "V1" module

Terminal

X1 S Cable shielding connected via capacitor to EARTH

X2 not connected

X3 B- Protocol loop signal -

X4 A+ Protocol loop signal +

Designation of the module in the operating menu: V1 X1-4; (X = A, B, C or D)

Name Description

26 Endress+Hauser

1) In this column, "X" stands for one of the slots "A", "B", "C", or "D".

Tankside Monitor NRF81 Electrical connection

1 3

2 4

SIM

22334

112233445566778

1 2 3 4 5 6 7 8

B1-3 B4-8

1 2 3 4 5 6 7 8

C1-3 C4-8

6.1.6 Terminals of the "Analog I/O" module (Ex d /XP or Ex i/IS)

A0031168

Terminals Function Connection diagrams Designation in the operating menu

B1-3 Analog input or output

C1-3 Analog I/O C1-3 (→  138)

B4-8 Analog input • RTD: →  31

C4-8 Analog IP C4-8 (→  132)

(configurable)

• Passive usage: →  28

• Active usage: →  30

• FMR5xx: →  32

Analog I/O B1-3 (→  138)

Analog IP B4-8 (→  132)

Endress+Hauser 27

Electrical connection Tankside Monitor NRF81

1 3

2 4

CDI

SIM

22334

112233445566778

POWER

1 3

2 4

CDI

SIM

1122334

112233445566778

POWER

1 3

2 4

CDI

SIM

22334

112233445566778

POWER

–

1 3

2 4

CDI

SIM

1122334

112233445566778

POWER

6.1.7 Connection of the "Analog I/O" module for passive usage

• In the passive usage the supply voltage for the communication line must be supplied by an external source.

• The wiring must be in accordance with the intended operating mode of the Analog I/O module; see the drawings below.

"Operating mode" = "4..20mA output" or "HART slave +4..20mA output"

 9 Passive usage of the Analog I/O module in the output mode

a Power supply b HART signal output c Analog signal evaluation

"Operating mode" = "4..20mA input" or "HART master+4..20mA input"

A0027931

28 Endress+Hauser

 10 Passive usage of the Analog I/O module in the input mode

a Power supply b External device with 4...20mA and/or HART signal output

A0027933

Tankside Monitor NRF81 Electrical connection

1 3

2 4

CDI

SIM

22334

112233445566778

POWER

–

1 3

2 4

CDI

SIM

1122334

112233445566778

POWER

"Operating mode" = "HART master"

A0027934

 11 Passive usage of the Analog I/O module in the HART master mode

a Power supply b Up to 6 external devices with HART signal output

Endress+Hauser 29

Electrical connection Tankside Monitor NRF81

1 3

2 4

CDI

SIM

22334

112233445566778

POWER

1 3

2 4

CDI

SIM

1122334

112233445566778

POWER

1 3

2 4

CDI

SIM

22334

112233445566778

POWER

1 3

2 4

CDI

SIM

1122334

112233445566778

POWER

6.1.8 Connection of the "Analog I/O" module for active usage

• In the active usage the supply voltage for the communication line is supplied by the device itself. There is no need of an external power supply.

• The wiring must be in accordance with the intended operating mode of the Analog I/O module; see the drawings below.

• Maximum current consumption of the connected HART devices: 24 mA (i.e. 4 mA per device if 6 devices are connected).

• Output voltage of the Ex-d module: 17.0 V@4 mA to 10.5 V@22 mA

• Output voltage of the Ex-ia module: 18.5 V@4 mA to 12.5 V@22 mA

"Operating mode" = "4..20mA output" or "HART slave +4..20mA output"

A0027932

 12 Active usage of the Analog I/O module in the output mode

a HART signal output b Analog signal evaluation

"Operating mode" = "4..20mA input" or "HART master+4..20mA input"

30 Endress+Hauser

 13 Active usage of the Analog I/O module in the input mode

a External device with 4...20mA and/or HART signal output

A0027935

+ 220 hidden pages