Emerson 1-Pair Protected Terminal Blocks, 3-Pair Protected Terminal Blocks Brochures and Data Sheets

Outside Plant for

Business-Critical Continuity™

1 and 3-Pair

Protected Terminal Blocks

Key Features

•Phenolic material provides low moisture absorption

•Raised terminal posts offer high surface insulation

•Interlocking design conserves space

Description

The 1-pair protected terminal block is made of electrical grade phenolic. The 3-pair protected terminal block is made of thermoplastic. These fire-resistant blocks provide high dielectric strength and low moisture absorption. The units have single color-coded 24-gauge PVC insulated wires attached to each terminal post (pair 1 = blue, pair 2 = orange, pair 3 = green). A stainless bracket for the 1-pair block prevents possible rotation while mounting on .312-in. (7.94mm) or .687-in. (17.50mm) standard width brackets.

Application

Terminal blocks are used in aerial ready-access enclosuress and buried wire cable pedestals. The units come with gas tube arresters.

281VSR2

381VSR2

1

OSPDS-061700 / 0510