TL606DW
Low-Frequency
Speaker System
|
|
• |
Designed for cinema stage use |
|
|
|
|
(behind the screen), THX® approved1 |
|
|
|
• |
Extended, 40-Hz response (f3) |
|
|
|
• |
Two premium DL15W long-throw woofers |
|
|
|
• Use as primary low-frequency source in |
||
|
|
|
two-way systems or as the subwoofer in |
|
|
|
|
multiway systems |
|
|
|
• |
Side-mounted connection panel |
|
|
|
|
facilitates hookup when depth behind |
|
|
|
|
the screen is restricted |
|
|
|
• Optional XEQ-504 passive crossover |
||
|
|
|
replaces connection panel—works with |
|
|
|
|
DH1A driver on HP940 or HP9040 horn |
|
|
|
• Optional HS6 or HS7 hanging kits— |
||
|
|
|
through-the-box steel tubes provide safe |
|
|
|
|
suspension |
|
|
|
______________ |
||
|
|
1. THX® is a registered trademark of Lucasfilm Ltd. |
||
SPECIFICATIONS |
Directivity Index Di, Median Over Indicated |
Suspension (see Suspending TL606DW |
||
Frequency Response, 10 Feet on Axis, |
Range (see Figure 4), |
Enclosures section): |
||
Swept One-Third-Octave Pink Noise, Half- |
40-125 Hz: |
|
Two “independently certified” suspension |
|
Space Anechoic Environment (see Figure |
0.0 dB |
|
kits are available, the HS6 and HS7 |
|
1): |
400-800 Hz: |
Optional Horn Mounting Kits: |
||
40-3,500 Hz |
7.5 dB |
|
HMK-1 and HMK-2 (can be used with the |
|
Low-Frequency 3-dB-Down Point, Normal: |
Distortion, 0.1 Full Power Input (see |
|
MP940 and HP9040 horns, respectively) |
|
40 Hz |
Figure 6), |
Dimensions, |
||
Usable Low-Frequency Limit (10-dB-down |
Second Harmonic, |
|
Height: |
|
point), Normal: |
100 Hz: |
|
100.3 cm (39.5 in.) |
|
30 Hz |
0.45% |
|
Width: |
|
Half-Space Reference Efficiency: |
500 Hz: |
|
57.2 cm (22.5 in.) |
|
5.8% |
0.28% |
|
Depth: |
|
Long-Term Average Power Handling |
Third Harmonic, |
|
44.7 cm (17.6 in.) |
|
Capacity per EIA Standard RS-426A (see |
100 Hz: |
Net Weight: |
||
Power Handling Capacity section): |
0.14% |
|
49.0 kg (108 lb) |
|
800 watts |
500 Hz: |
Shipping Weight: |
||
Maximum Long-Term Average Mid-Baud |
0.89% |
|
54.4 kg (120 lb) |
|
Acoustic Output: |
Distortion, 0.01 Full Power Input |
|
|
|
11.6 watts |
(see Figure 5), |
DESCRIPTION |
||
Sound Pressure Level at 1 Meter, 1 Watt |
Second Harmonic, |
The Electro-Voice TL606DW is an optimally |
||
Input, Anechoic Environment, Band- |
100 Hz: |
vented, direct-radiator speaker system for high- |
||
Limited Pink-Noise Signal, |
0.16% |
output reproduction of low frequencies to 40 |
||
100-800 Hz: |
500 Hz: |
Hz. The TL606DW’s design is based on the |
||
100 dB |
0.1% |
vented-enclosure modeling technique of A.N. |
||
40-125 Hz: |
Third Harmonic, |
Thiele and R.H. Small, which makes possible a |
||
96 dB |
100 Hz: |
combination of high efficiency, low distortion, |
||
Dispersion Angle Included by 6-dB-Down |
0.16% |
and extended low-frequency performance in |
||
Points on Polar Responses, Indicated |
500 Hz: |
an enclosure of moderate size. |
||
One-Third-Octave Bands of Pink Noise |
0.5% |
The TL606DW employs dual DL15W very-low- |
||
(see Figure 3), |
Transducer Complement: |
|||
40-125 Hz Horizontal and Vertical: |
Two DL15W’s |
frequency reproducers in a 9-cubic-foot (255 |
||
360° |
Box Tuning Frequency: |
liter) enclosure. The DL15W’s high linear cone- |
||
400-800 Hz Horizontal: |
40 Hz |
excursion ability (Xmax = 0.22 inches, zero to |
||
110° ±12° |
Impedance, Minimum: |
peak) and 400-watt long-term average power |
||
400-800 Hz Vertical: |
4 ohms |
capacity contribute substantially to the |
||
46° ±13° |
Input Connections: |
TL606DW’s high acoustic output ability (see |
||
Directivity Factor Rθ (Q), Median Over |
Screw terminals (#8-32) on barrier strip |
Power Handling Capacity section). |
||
Indicated Range (see Figure 4), |
Enclosure Materials and Finish: |
APPLICATIONS |
||
40-125 Hz: |
Black, vinyl-clad particle board |
|||
The TL606DW is ideally configured for a wide |
||||
1.0 |
|
400-800 Hz: |
variety of high-output, low-frequency reinforce- |
|
|
5.7 |
|
FIGURE 1 — Axial Frequency Response
(4 volts/10 feet)
FIGURE 2 — TL606DW One-Third-Octave Polar Responses
(anechoic environment)
FIGURE 3 — TL606DW Beamwidth vs Frequency Whole Space (anechoic)
FIGURE 4 — TL606DW Directivity vs Frequency Whole Space (anechoic)
FIGURE 5 — TL606DW Harmonic Distortion, 0.01 Rated Power Input (8 watts), 10 Feet on Axis
FIGURE 6 — TL606DW Harmonic Distortion, 0.1 Rated Power Input (80 watts), 10 Feet on Axis
FIGURE 7 — Vertical and Horizontal Mounting Methods for the TL606DW Using the HS6 and HS7 Suspension Kits