XLD281
3-Way,High-Output, Very Compact Line-Array Element
Key Features:
•Very Compact, Lightweight
•CCTTM (Coverage Control Technology)
•Simple, Quick Integrated Rigging
•120° Horizontal Coverage to 250 Hz
•Versatile Subwoofer Integration
•Bi-Amp or Tri-Amp Operation
•Neodymium Transducers
•LAPS Aiming and Flying Software
General Description:
EV engineers have defined a new group of Very Compact line array elements, XLVC. It is comprised of the models; XLD281 full range, XLE181 full range, and the XS212 sub woofer. The XLD281 is a 3 –way design using CCT (Coverage Control Technology) to control horizontal coverage to 250 Hz. It uses a 8" neodymium LF transducer, a 8" neodymium LF/MB transducer, and two neodymium 2" voice coil compression drivers combining through 2 hydra plane wave generators into a 120° x 10° waveguide. CCT uses both 8" transducers to provide maximum low frequency output and operating bandwidth while controlling horizontal beam width to 250 Hz by using DSP. The XLD281 can be used in tri-amp mode, or in bi-amp using a sophisticated internal passive network. Designed for use in arrays of four or more elements the XLD281 delivers full bandwidth audio with precise, predictable coverage control. Integrated rigging with hinge points located correctly between array elements is simple to use and quickly provides uncompromised line array performance. Ground stacking is easily done using Array Rails or subwoofers as the array base.
Most applications using flown very compact elements require subwoofers integrated into the same array as the full range systems. XLVC provides two methods to conveniently do this. The XS212 sub woofer module has the same rigging foot print as the XLD281 allowing it to be directly arrayed above, or below XLD281 full range systems. Where vertical space is limited sub woofer arrays can be created and flown behind the XLD281 full range array using an additional grid and a Coupler Beam. LAPS modeling software quickly provides array configurations and rigging information.
XLVC delivers unprecedented performance in applications ranging from live reinforcement to performing arts venues, to houses of worship.
Technical Specifications:
Freq. Response1 (-3 dB): |
75 Hz-18 kHz |
Freq. Range1 (-10 dB): |
60 Hz-20 kHz |
Max Calculated SPL1 : |
135 dB Cont., 141 dB Pk |
Horizontal Coverage: |
120° |
|
|
Vertical Coverage: |
Array Dependant, Software Definable |
|
|
Rigging: |
Fully Captive Aluminum, 1° increments, |
|
16 elements with 8 to 1 Safety Factor |
|
|
LF1 Power Handling: |
200W Cont., 800W Peak |
|
|
LF2 Power Handling: |
200W Cont., 800W Peak |
|
|
HF Power Handling: |
80W Cont., |
|
320W Peak |
|
|
Biamp LF1/HF Power |
400W Cont., 1600W Peak |
Handling: |
LF2 - 200W Cont., 800W Peak |
|
|
Sensitivity1 : |
112 dB |
Bandpass Freq2: |
50 - 250 Hz |
LF1 to HF Crossover |
1600 Hz |
Freq2: |
|
LF1 Passband: |
1 x 8" DVN2080, 16 ohms |
Recommended Amplifier: |
EV CP3000S |
|
|
LF2 Passband: |
1 x 8" DVN2080, 16 ohms, |
Recommended Amplifier: |
EV CP3000S |
|
|
HF Passband: |
2 x ND2S, 16 ohms |
Recommended Amplifier: |
EV CP3000S |
Biamp LF1/HF Passband: |
16 ohms, |
Recommended Amplifier: |
EV CP3000S |
|
|
Connectors: |
2 x NL8 |
|
|
Enclosure Material: |
Birch plywood w/EVCoatTM |
Grille: |
Zinc plated steel with powdercoat paint |
|
|
Environmental Spec: |
IEC 529 IP24, MIL 810 |
|
|
Dim (HxWxD): |
9.90" x 28.58" x 14.52" |
|
(251 x 726 x 369 mm) |
|
|
Net Weight: |
48 lbs (21.8 kg) |
|
|
Shipping Weight: |
51 lbs (23.1 kg) |
|
|
1Full Space Measurement of 4 Elements.
2Use EV or KT Signal Processing or Download Presets from Electro-Voice Website.
Loading...