Electrolux AOS061GCG2 User Manual

Page 1/8

Identification:

Tech. Bulletin n°:

Date:
Issuer:
Factory:

Subject

A16 – N700, A14 - N900

PDX2007-10

26-11-2007
M. Scalon (TT&S)
PD-Vallenoncello Modular Cooking

RAPID SYSTEM PASTA COOKERS N700 AND
N900: NEW BOILER FOR DESCALING
PROCEDURE AND BOILER SAFETY PRESSURE
SWITCH.

Model

Problem Reason Breaking is due to:

178141, 178154, 200372, 200373, 200374, 200375,
200377, 200379, 200381, 200383, 210377, 210379,
210381, 210383, 220377, 220379, 220381, 220383.

Boiler heating element breaking.

Actions in
factory

 quick production of scale inside the boiler,
 water flow stopping,
 heating elements working even without water,
 breaking of thermofuse protection.

 Modified the boiler with the addition of a drain pipe,

from s/n 702….
New boiler spare part code 0C4222 (factory code:

873882800).

 Introduced a drain valve connected to the boiler

drain pipe, to easily empty and clean the boiler, from
s/n 702….
Drain valve spare part code 005902 (factory code:

835848500).

 Implemented a descaling procedure to clean the

boiler, see relevant Handbooks.

 Introduced on N900 Pasta Cooker the pressure

switch as safety device to avoid the heating element
working without water from s/n 722...

ELECTROLUX PROFESSIONAL SPA TELEPHONE TELEFAX E-MAIL ADDRESS
POSTAL ADDRESS [phone] [phone] [e-mail]
V.le Treviso 15 [phone] [e-mail]
33170 PORDENONE – ITALIA

Page 2/8

Tech. Bulletin PDX2007-10

Pressure switch spare part code 0C0872 (factory
code: 643813100).

Updated the relevant electric wiring diagrams:

- 602863302 for Electric Pasta Cooker,

- 602864302 for Gas Pasta Cooker,

- 602869701 for USA Electric Pasta Cooker,

- 602869801 for USA Gas Pasta Cooker.

Actions in

See instructions in the next pages to retrofit the

field

modifications in old appliances.

The present modification can be retrofitted but it is not mandatory

New boiler with drain pipe G 3/8 threaded

Boiler spare part code

0C4222

boiler drain pipe

Ø 7 mm holes for
fixing the boiler
to the bottom of
the appliance

G 3/8

Boiler drain valve

Spare part code

005902

Page 3/8

Tech. Bulletin PDX2007-10

To install the new boiler in appliances older than s/n 702.. ,

1. remove the heating element inside the boiler, and then the boiler from
the bottom of the appliance,

2. make a hole (recommended Ø30mm) in the bottom of the appliance to
place the boiler drain pipe (see drawings below),

3. fix the boiler to the bottom with screws using the 2 holes (Ø7mm)
present in the boiler front part, and reconnect the rubber pipes to the
boiler pipes,

4. put again the heating element inside the boiler,

5. screw the drain valve on the boiler drain pipe from below.

ONE MODULE BOTTOM N900: holes position for boiler drain pipe

G 3/8