Dyson Airblade V Technical Specifications
TECHNICAL SPECIFICATION
Fixing
locations
(4)
Side cable
entry point
SIDE ELEVATIONREAR ELEVATION
Rear cable
entry point
Side cable
entry point
Fixing
locations
(4)
See table for recommended
mounting heights
FLOOR
Recommended installation heights from floor
Male
Female X 1289mm Y 1265mm Z 895mm
Child or disabled X 1074mm Y 1050mm Z 680mm
Child 5-8 X 952mm Y 928mm Z 558mm
Child 8-11 X 1052m m Y 1028mm Z 658mm
Child 11-14 X 113 2 m m Y 110 8m m Z 738mm
Machine dimensions
Height 394mm Width 234mm Depth 100mm
X 1324 mm Y 130 0 mm Z 930mm
All dimensions shown in mm (+/-5mm)
Minimum clearance
220mm clearance either side and 30mm above machine.
Cable entry point from floor
Male
Female 1054mm
Child or disabled 839mm
Child 5-8 717m m
Child 8-11 817m m
Child 11-14 897m m
1089mm
For further information please contact Dyson.
0800 345 7788 (UK) 01-401-8300 (IE)
www.dysonairblade.com
Electrical
Input voltage/Frequency: 220 -253V 50 Hz
Rated power: 1600 W
Motor type: Dyson digital motor – brushless DC Motor
Motor switching rate: 6,000 per second
Motor speed: 90,000 rpm
Operating temperature range: 0°– 40°C
Heater type: None
Standby power consumption: Less than 0.5 W
Construction
Casing construction: Polycarbonate casing
Antibacterial coating t ype: AB08 (Sprayed nickel) contains antibacterial
additive in paint. AB08 ( White) contains antibacterial moulded additive.
Can help prevent the growth of bacteria.
Colour finish: AB08 Sprayed nickel moulded plastic.
AB08 White moulded plastic.
Back plate/mounting bracket construction: ABS/PBT Plastic
Exterior screw type: Anti-tamper M4 Pin-Hex
Water ingress protection to IP24
Filter
HEPA filter (Glass fibre and fleece prelayer)
Bacteria removal 99.9%
Operation
Proximity capacitive sensor. Touch free operation.
Hand dry time measurement: 10 seconds
(Measurement based on National Sanitation Foundation Protocol P.335)
Operation lock-out period: 30 seconds
Airspeed at apertures: 430 mph
Operating airflow: Up to 30 l/s
Logistics
Serial number prefix: AB08 (Sprayed nickel) EB5; AB08 (White) EB4
Single unit order code: AB08 (Sprayed nickel) 25882-01;
AB08 (White) 25881-01
Net weight: AB08 2.8kg
Packaged weight: AB08 4.0kg
Packaged dimensions: H145 × W455 × D274 mm
Unit barcode: AB08 (Sprayed nickel) 5025 1550 1572 8;
AB08 (White) 5025 1550 1571 1
Product range
Sprayed Nickel White
Standard guarantee
5 year guarantee
The Car bon Reduc tion Labe l is the regis tered tr ade
mark of th e Carbon Trus t. The NSF lo go is the
registered trade mark of NSF International.
For further information please contact Dyson.
0800 345 7788 (UK) 01-401-8300 (IE)
www.dysonairblade.com
Loading...