Dymo Rhino 1000, RhinoPRO 1000 User Manual

www.dymo.com/industrial

User Guide

2

Figure 1 RhinoPRO 1000 Printer

Navigation Key

Function/Shift Key

Serial Key

Space Bar/
Symbol Key

Symbol Hot Keys

Power Key

Enter Key

Label Exit

LCD Display

Cutter Key

Delete/Clear Key

Normal Key

Flag Key

Length Key

Vertical Key

Print/Copies Key

Language Key

Size Key

CAPS Key

Style Key

Box/Underline Key

3

About Your New Printer

With your new DYMO RhinoPRO™ 1000 label
printer, you can create a wide variety of high­quality, self-adhesive labels. You can choose to
print your labels in many different sizes and styles.
The printer uses RhinoPRO Industrial label
cassettes in widths of 3/8” (9 mm) and 1/2”
(12 mm). RhinoPRO Label cassettes are also
available in a wide range of materials.

Visit www.dymo.com/industrial for information on
obtaining labels and accessories for your printer.

Warranty Registration

Please complete the warranty registration card and
return it to the appropriate customer service
address within seven days. Visit www.dymo.com/

industrial for details.

Getting Started

Follow the instructions in this section to start
printing your first label.

Inserting the Batteries

The printer uses six AAA batteries. To save power,
the printer will automatically turn off after two
minutes of inactivity.

To insert the batteries

1. Press the thumb catch on the back of the printer
to open the battery compartment door. See
Figure 2.

Figure 2

2. Insert the batteries following the polarity
markings (+ and –).

3. Close the battery compartment door.

Remove the batteries if the printer will not be

used for a long period of time.

Inserting the Label Cassette

Your printer comes with one label cassette. Visit
www.dymo.com/industrial for information about
purchasing additional label cassettes.

To insert the label cassette

1. Slide the latch to open the label cassette door.
See Figure 3.

The first time you use the printer, remove
the protective cardboard insert from between the
print head and pinch roller.

Figure 3

2. Make sure the label and ribbon are taut across
the mouth of the cassette and that the label
passes between the guideposts. If necessary,
turn the spool clockwise to tighten the label. See
Figure 3.

3. Insert the cassette with the label and ribbon
positioned between the print head and pinch
roller. See Figure 4.

cardboard

Turn spool to

insert

Remove

tighten label

Slide latch

to open