Doro Primo 305 User Manual

Primo 305 by Doro

User Manual

U2

i

1. Speaker

Phone with the mobile phone at the ear.

2. Navigation buttons

For navigating in menus and text input. In
addition by default quick access (see also
page 58):
Up ( ▲): Enter camera mode
Down ( ▼): Write SMS
Left ( ◄ ): Enter alarm menu
Right ( ►): Enter ring tone menu.

3. Left softkey

Enter the main menu.

4. Call button

Dial and answer calls; open call history.

5. Numerical buttons

In standby mode: Enter phone number; press
and hold 1: Call to voicemail box (phone
number must be stored); enter numbers and
letters. Pressing a number in standby mode
displays all names in the phonebook starting
with one of the letters on the button.

6. * button (additional function)

In standby mode: Menu (left softkey ),
followed by * button activates/deactivates
keylock; for text entries: Open table with
special characters.

ii

7. 0 button (additional function)

In standby mode: press and hold to enter “+”,
“p” and “w”.

8. Central button

In standby mode: Open main menu; in
menus: OK.

9. Right softkey

In standby mode: Open phonebook; press
and hold: torch on/off.

10. End button

End call; return to standby mode; press and
hold in standby mode: switch telephone
on/off.

11. # button (additional function)

In standby mode: Press and hold to switch
ring tone on/off. When entering numbers and
letters: change input mode.

12. Camera lens

13. Hands-free speaker and ringing

14. Torch LED

15. Headset jack for 3.5mm standard headset.

16. Micro USB port

Charging port or connect to PC.

1

Contents

Installation . . . . . . . . . . . . . . . . . . . . . . . . . .5

In the box . . . . . . . . . . . . . . . . . . . . . . . . . .5

Insert SIM card, memory card

and battery . . . . . . . . . . . . . . . . . . . . . . . . .5

Charging . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Menu icons . . . . . . . . . . . . . . . . . . . . . . . . .9

Status icons . . . . . . . . . . . . . . . . . . . . . . .10

Operation . . . . . . . . . . . . . . . . . . . . . . . . . .11

Switch telephone on . . . . . . . . . . . . . . . .11

Standby mode . . . . . . . . . . . . . . . . . . . . .12

Change language, time and date . . . . . . .12

Making a call . . . . . . . . . . . . . . . . . . . . . .12

Dial numbers from the phonebook . . . . . .13

Answering a call . . . . . . . . . . . . . . . . . . .14

Volume control . . . . . . . . . . . . . . . . . . . . .14

Text entry . . . . . . . . . . . . . . . . . . . . . . . .14

Call Options . . . . . . . . . . . . . . . . . . . . . . .15

Call waiting . . . . . . . . . . . . . . . . . . . . . . . .17

Call information . . . . . . . . . . . . . . . . . . . .17

Keylock . . . . . . . . . . . . . . . . . . . . . . . . . .17

Silent . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

2

Headset . . . . . . . . . . . . . . . . . . . . . . . . .19

Emergency calls . . . . . . . . . . . . . . . . . . . .19

Phonebook . . . . . . . . . . . . . . . . . . . . . . . .20

Create phonebook entry . . . . . . . . . . . . .20

Manage phonebook entries . . . . . . . . . . .21

Messaging . . . . . . . . . . . . . . . . . . . . . . . . .25

Create and send SMS . . . . . . . . . . . . . . .25

Create and send MMS . . . . . . . . . . . . . . .26

Inbox, Sent, Outbox . . . . . . . . . . . . . . . .29

Call log . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Camera (Photo) . . . . . . . . . . . . . . . . . . . . .31

Image viewer . . . . . . . . . . . . . . . . . . . . . . .33

Video recorder . . . . . . . . . . . . . . . . . . . . . .34

Video player . . . . . . . . . . . . . . . . . . . . . . . .36

File manager . . . . . . . . . . . . . . . . . . . . . . . .37

FM Radio . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Connect phone to computer . . . . . . . . . .39

Move data between telephone

and computer . . . . . . . . . . . . . . . . . . . . . .40

Disconnect USB cable safely . . . . . . . . . .40

Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .41

3

Signal tones . . . . . . . . . . . . . . . . . . . . . .41

Phone settings . . . . . . . . . . . . . . . . . . . . .43

Call settings . . . . . . . . . . . . . . . . . . . . . . .48

Voicemail . . . . . . . . . . . . . . . . . . . . . . . .51

Advanced Settings . . . . . . . . . . . . . . . . . .52

Network settings . . . . . . . . . . . . . . . . . . .54

Security settings . . . . . . . . . . . . . . . . . . . .55

Connections . . . . . . . . . . . . . . . . . . . . . .59

Reset to factory settings . . . . . . . . . . . . .62

SMS settings . . . . . . . . . . . . . . . . . . . . . .63

MMS settings . . . . . . . . . . . . . . . . . . . . . .65

Service notification . . . . . . . . . . . . . . . . . .66

Bluetooth® . . . . . . . . . . . . . . . . . . . . . . . .66

Calendar . . . . . . . . . . . . . . . . . . . . . . . . . .69

Extras . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Torch . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . .70

Calculator . . . . . . . . . . . . . . . . . . . . . . . .71

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . .72

Safety precautions . . . . . . . . . . . . . . . . . .72

Network services and network costs . . . .72

Operating environment . . . . . . . . . . . . . .72

Medical devices . . . . . . . . . . . . . . . . . . . .73

Pacemakers . . . . . . . . . . . . . . . . . . . . . .74

4

Explosive areas . . . . . . . . . . . . . . . . . . . .74

Hearing protection . . . . . . . . . . . . . . . . . .75

Emergency calls . . . . . . . . . . . . . . . . . . . .76

Vehicles . . . . . . . . . . . . . . . . . . . . . . . . .76

Cleaning and Maintenance . . . . . . . . . . .77

Warranty and Service Information . . . . . .79

Technical specifications . . . . . . . . . . . . . .80

Specific absorption rate (SAR) . . . . . . . . .81

Approval and conformity . . . . . . . . . . . . .81

5

Installation

In the box

• 1 mobile phone

• 1 energy efficient switch-mode power supply

• 1 battery pack Li-ion 3.7V / 800mAh

• 1 user manual

IMPORTANT

Turn the telephone off and disconnect from
charger before opening the battery
compartment.

Insert SIM card, memory card and battery

The SIM card and memory card holders are
located under the battery.

1. Carefully press with your thumb on the rear
casing cover and move it up. Lift the cover
off. In case the battery is inserted, lift it with
your fingernail and remove it.

2. Insert the SIM card under the metal
bracket. Ensure that the SIM card contacts
face down and the chamfered corner
matches the bracket.

6

The SIM card contacts are not to be
scratched or bent. Do not touch the
contacts with your fingers.

3. MicroSD memory card

For using the high storage features of your
telephone, particularly for photos, audio,
etc. you need to insert a microSD memory
card.

Insert the memory card in the slot: slightly

press on the card holder and move it
carefully up. The memory card holder can
be flipped open. Place the memory card
level in the black plastic holder.

7

Ensure that the contacts of the memory

card face down and that the projection
matches the marked area. The memory
card contacts are not to be scratched or
bent. Flip the holder down and lock.

4. Insert the battery in the battery
compartment, with the contacts top left.

5. Replace the cover and carefully press down
with your thumb until it clicks in place.

IMPORTANT

Only use compatible memory cards. Compatible
card types: microSD, microSDHC. Incompatible
cards can damage the card, the telephone and
the saved data.

CHARGING

CAUTION

Only use batteries, chargers and accessories
approved for this model. Connecting other
accessories from third party suppliers can be
hazardous and can void the operating permit
for the telephone as well as the warranty.

8

The empty battery icon will flash and an alert
is sounded if the battery capacity is low. To
charge the battery, connect the power supply
to mains power and the charger jack at the
bottom of the telephone.
If the mobile phone is switched on:

Charger connected is displayed when the
charger is connected and Charger removed is

displayed when the charger is removed. When
the mobile phone is switched on or off: the
battery icon is animated during the charging
cycle. A full charging cycle is approx. 3 hours.
Disconnect the telephone from the charger
after the battery is fully charged.

Save energy

After fully charging the battery and disconnecting
the telephone from the charger, please
disconnect the charger from mains power.

Note!

The display backlight turns off after a while to
save energy. Press any button to reactivate the
display backlight. Full battery capacity is only
achieved after 3 - 4 charging cycles. During the

9

course of time battery capacity is reduced. This
means that the talk and standby times are
reduced over time.

Icons

Menu icons

Multimedia

Phonebook (Contacts)

Call log

Settings

Mesaging (SMS/MMS)

Calendar

FM Radio

10

Extras

Bluetooth

Status icons

Signal strength

Battery status

Keylock activated

Alarm time programmed

Bluetooth activated

Headset connected

MMS sent

Profile “General” activated

Profile “Silent” activated

Profile “Outside” activated

Unread SMS/MMS

11

SD card inserted

Operation

Switch telephone on

Press and hold the red button for 4
seconds to switch the telephone on/off. If the
SIM card is locked with a PIN code (Personal
Identification Number), then the display shows

Enter PIN.

Enter the SIM PIN code and press OK (
top left on the keypad). To delete press Delete
( top right on the keypad).

Note!

Contact your network provider if you did not
receive PIN and PUK codes with your SIM
card or PIN and PUK codes are not available.

Remaining attempts shows the number of

remaining attempts for entering the PIN code.
PIN blocked is displayed if no attempts are left.
In this case the SIM card must be unblocked
with the PUK code (Personal Unblocking Key).

12

1. Enter the PUK code and press OK to

confirm.

2. Enter a new PIN code and press OK to

confirm.

3. Enter the new PIN code again and press

OK to confirm.

Standby mode

If the telephone is operational and you have not
pressed any buttons, then it is in standby mode.
The left softkey in standby mode is Menu.
The right softkey in standby mode is Names.

Tip:

Press to return to standby mode.

Change language, time and date

The SIM card determines the default language.
See telephone settings from page 53 to
change language, time and date.

Making a call

1. Enter phone number and prefix.

Press Delete to delete your input.

After pressing the first number all names

from the phonebook are displayed that

13

start with one of the letters on that
numerical button. This can be used for
quick search of saved numbers. Press ▼
to select a displayed name.

2. Press to make a call. Press End to
cancel the call.

3. Press to end the call.

Tip:

For international calls enter + before the
country code, so you can best use the
phonebook in any country. To enter the
international code press and hold 0 button
until + is displayed.

Dial numbers from the phonebook

1. Press Names to open the phonebook.

2. Use the navigation buttons ▲▼ to scroll
through the phonebook or make a quick
search by entering the first letter with the

respective button, see Text entry, page 17.

3. Press to dial the respective number
or press Back to return to standby mode.

14

Answering a call

1. Press or Answer to answer the call,

or press Reject to reject the call (busy
signal).

Alternatively press to directly reject

the call.

2. Press

to end the call.

.

Volume control

Use the navigation buttons ▲▼ to set the
volume during a call. The volume level is
displayed. Use the navigation buttons ▲▼ to
set the ring tone volume while the phone is
ringing.
The last setting is saved.

Text entry

Enter text by repeatedly pressing the
respective numerical buttons. Press the
respective button repeatedly until the desired
letter is displayed. Wait until the blue
background of the current character disappears
before entering the next character.
Press the * button to display a list of special

15

characters. Select the desired character with
the navigation buttons ▲▼◄ ► aand press
OK to enter.
Use the navigation buttons ▲▼◄ ► to move
the cursor within the text.
Use the # button to toggle between upper and
lower case letters and numbers. The icon top
left shows the input mode:
Abc Upper case of the first letter after a full

stop (beginning of sentence)/ no umlaut!

ABC UPPER CASE/no umlaut!
abc lower case/no umlaut!
De Upper case of the first letter after a full

stop (beginning of sentence)

DE UPPER CASE
de lower case
123 Numbers

Call Options

During a call you have access to further
functions with the softkeys ( ):

Hands-free (right softkey)

Turn on hands-free function.

16

Caution:

To avoid loud noise and damaging
your hearing, hold the phone at
least 1 m away from your ear
before turning on the hands-free
function!

Note!

When using the hands-free option only
one person can speak. Change between
talking/listening is voice-triggered. Loud
background noise (music etc.) can influence
the hands-free function.

Option (left softkey)

A menu with following options is displayed:

Hold/End hold

Hold current call/continue.

End single call

End current call (as with ).

New call

Make a second call.

Phonebook

Browse phonebook.

17

Call history

Open call history.

Messages

Read or write SMS.

Silent

Mute microphone.

DTMF

Switch to DTMF e.g. for remote access of
answering machine.

Volume

Set speaker volume.

Call waiting

You will hear a signal tone if you receive
a further call while making a call. Press Option,

select Answer and then OK to hold the current

call and answer the new call.

Tip:
Call waiting must be activated, see Call
waiting, page 60.

Call information

During a call the dialed or calling number and
the duration of the call are displayed. In case of

18

blocked caller ID Unknown is displayed.

Keylock

Press Menu (left softkey ) and then the *
button to lock/unlock the keypad.
Even with the keypad locked you can answer
calls with and switch the phone on/off
with .
The keylock is deactivated for the duration of
the call. After ending the call the keylock is
again activated.

Note!

You can dial the emergency number 112 even
with activated keylock. The numbers are only
displayed after the buttons 112 were pressed
consecutively.

Silent

Silent is a preset profile, where key tone,
message tone and ring tone are deactivated,
while vibration, tasks and alarm stay unchanged.

Tip:

Press and hold the # button to activate/
deactivate “Silent”.

19

Headset

If an optional headset is connected, the
integrated microphone is automatically muted.
Calls can be answered/ended with the call/end
call buttons on the headset cable (if available).

CAUTION

Using a headset with high volume setting can
cause hearing damage. Check the volume
setting before using a headset.

Emergency calls

With switched on telephone you can always
make an emergency call by entering the valid
emergency number and pressing .
Some networks even allow emergency calls
without valid SIM card. Your network provider
will give further information.

Note!

Please note that since 2009 it is no longer
possible in Germany to dial the emergency
number 112 without active SIM card. A credit
balance is not necessary – but the SIM card
must be valid, registered and activated.

Misuse of the emergency number 112 can be
prosecuted and can be punished by a fine.

20

Phonebook

In the phonebook 300 entries can be saved.
The number of entries on the SIM card depend
on the respective SIM card.

Create phonebook entry

1. Open the phonebook (Menu ->

Phonebook -> OK or Name).

2. Press Option to Add a new contact.

3. Mark Select and press Select.

4. Select if the contact is to be saved on the
SIM card or on the telephone.

5. Press Option and select Edit. Enter
a name for the contact; see Text entry,

page 17. Delete by pressing Delete.

6. Press Option and select Done.

7. Press ▼.

8. Press Option and select Edit. Enter the

phone number including prefix.

9. Press Option and select Done.

Note:

For phonebook entries in the telephone
(not on SIM card!) you can select a caller
image and a special ring tone.

21

10. Finally press Option, select Save and

press Select.

Tip:

For international calls enter + before the
country code for using the phonebook in all
countries. For entering the international code,
press and hold the 0 button until + is displayed.

Manage phonebook entries

1. Open the phonebook (Menu ->

Phonebook -> OK or Name).

2. Select a contact and press Option.

3. Select one of the following options and

press Select:

View - Display details for the selected

contact.

Send text message - Press Select to

create an SMS; see Create and send

SMS, page 30.

Send multimedia SMS - Press Select to

create an MMS; see Create and send
MMS, page 32.

Call - Press Select to call the contact.

22

Edit

1. Select the row to be changed, press

Option -> Edit and change the text.

2. Apply the changes by pressing

Option and selecting Done.

3. Finally press Option, select Save and

press Select.

Delete - Press Select to delete the

selected entry from the phonebook.
Press Yes to confirm or No to cancel.

Copy - Press Select to copy the selected

entry from the telephone to the SIM card
or vice versa.

Send contact - After pressing Select the

contact data can be sent as SMS or
MMS or transmitted via Bluetooth.

Add to blacklist - The contact is added to

the blacklist (see page 65).

Mark several - Press Select to enter

marking mode. Here you can mark
several entries to be copied, deleted or
sent an SMS.

23

Phonebook settings

In this menu you have the following
options:

Speed dial - Activate the speed dialing

function by selecting Status with OK
and confirm On by pressing OK. Then
select Set number, press OK and
then Edit to assign phone numbers to

the eight presets (numerical buttons 2
to 9). Press OK to confirm. You can
delete assigned numbers by marking,
then pressing Option and selecting

Delete.

Additional number -

Fixed dial - With fixed dial you can

only call numbers, which are stored

in the Fixed dial list. To call other

numbers enter PIN2. If the inserted
SIM card does not have PIN2, then
this function is not supported.

Memory status - Display used storage

space (telephone/SIM card).

Copy contacts - Copy selected

contacts from the telephone to the
SIM card and vice versa.

24

Move contacts - Move selected

contacts from the telephone to the
SIM card and vice versa.
CAUTION: The contacts are deleted
in the original location!

Delete all contacts - All contacts are

deleted on the telephone or SIM card.

This cannot be reversed!

25

Messaging

Create and send SMS

1. Press direct access ▼ (default) or press

Menu, go to Messages -> Write SMS and

press OK.

2. Select Text message and press OK.

3. Enter the desired message, see Text
entry, page 17, and press Option.

4. Select an existing recipient with Send to
and Add from phonebook from the

phonebook and press Add.

Alternatively, select Enter number and

press OK to manually add a recipient; then
press OK.

5. Press Option again and select Send to

send the message.

6. You can also change the recipient by

selecting Edit recipient or delete this or all
recipients with Delete recipient or Delete
all recipients. With Save you save the

SMS for later use in the drafts folder.

26

Note!

When adding several recipients every
message is charged individually. Up to
10 recipients are possible. For international
calls enter + before the country code for using
the phonebook in all countries. For entering
the international code, press and hold the
0 button until + is displayed.

Note!

Before sending an SMS you must save the
number of your message center. The number
of your SMS center is provided by your
network provider and is usually stored on the
SIM card. Alternatively, you can enter this
number manually. See SMSC address,
page 81.

Create and send MMS

An MMS can contain text and media objects
such as images or audio. For this reason both
you and the recipient need a mobile phone
subscription supporting sending and receiving
MMS. You get the parameters from your
service provider.

27

Go to Menu -> Messages -> Message
settings -> Multimedia message -> Data
account. Select the data account for your

provider and press OK to confirm. Then
press to return to the start menu. If your

provider is not listed, see Data accounts,

page 76, for setting up the MMS account.

1. Press direct access ▼ (default) or press

Menu, go to Messages -> Write SMS and

press OK.

2. Select Multimedia message and press OK.

3. Enter the desired message, see Text
entry, page 17, and press Option.

4. Add to your message further elements

from the options Add image, Add sound,

Add video, Add subject. With MMS
preview you can display the MMS, with
Slide options you can add slides

before/behind and set their timer, under

Advanced you can insert an attachment or
with Save you can save the MMS in the

drafts folder for later use.

28

5. Select Send to and select with Add from
phonebook existing recipients from the

phonebook, then press Add.

Alternatively, select Enter recipient and

press OK to add a recipient manually, then
press OK.

6. Press Options and select Send to send

the message. Further options are:

Send options - Settings for Send report,

Read report, Priority, Send time.

Edit recipient – Change number of the

recipient.

Remove recipient - Delete recipient

Remove all recipients - Delete all

recipients.

Change to Cc – Mark the current recipient

as recipient of a copy.

Change to Bcc - Mark the current

recipient as recipient of a blind copy
(recipient cannot be seen by other
recipients).

Save – Save MMS for later use in the

drafts folder.

29

Inbox, Sent, Outbox

1. Press Menu, go to Messagesand press

OK.

2. Select Inbox / Outbox / Sent messages

and press OK.

3. Select a message and press Option ->

View. Use ▲▼ to scroll through the

messages.

4. Press Option for the following options:

Answer with SMS – Create SMS for the

sender.

Answer with MMS - Create MMS for the

sender.

Call sender – Call the sender.
Forward – Forward the message to

a different recipient.

Delete - Delete the message.
Advanced

Use number - The sender number is

available for further use, e.g. to be
directly saved as a contact.

Use URL – If SMS contains a URL, then

it is displayed for further options.

Use USSD - If SMS contains a USSD,

then it is displayed for further options.

30

Copy to telephone / SIM – Copy the

SMS from SIM card telephone and
vice versa.

Move to telephone / SIM - Move the

SMS from SIM card telephone and
vice versa.

Details - Sender, type, reception date and

storage location of the message are
displayed.

Call log

Missed calls, dialed numbers and received calls
are saved in the call history. 10 calls of each
type can be saved. In case of multiple calls
from or to the same number only the latest call
is saved and in brackets the total number of
calls is shown.

1. Press to see all call history.
or

Press Menu, go to Call log and press OK.

Select a list and press OK.

2. Use ▲▼ to scroll through the list.

31

3. Press to select a phone number or

press Option to navigate to the following
settings:

View – Show details of the selected entry.
Call – Call the telephone number.
Send text message – Send SMS to the

telephone number.

Send multimedia message – Send MMS

to the telephone number.

Save in phonebook – Save the telephone

number in the phonebook.

Add to blacklist – Add the telephone

number to the blacklist.

Edit before call – Change the telephone

number before calling.

Delete – Delete entry.
Mark several – Mark several entries for

batch editing such as delete.

Camera (Photo)

For clear photos clean the lens with a dry cloth.

1. Press Menu, go to Multimedia -> Camera

and press OK or press ▲ (default) to
quickly access the camera.

32

2. Press the center button of the navigation
buttons to take a photo. Use ▲▼ to zoom
the image in or out before taking the photo.

Note!

Zooming can have an impact on the image
quality.

3. Press Back to exit the camera function or
press Option for the following options:

Change to video recorder - Switch to

video recording mode.

Photos - Display all saved photos. Use

the navigation buttons ▲▼◄ ► to
browse the list.

Camera settings - Set Shutter tone, Anti

flicker value and Delay timer – select

between Off and delays between 5 and
15 seconds.

Image settings - Set Image size and

Image quality. You get best results with

Image size: 640x480 / Image quality:
Good.

White balance – Select between different

profiles for different lighting conditions
(e.g. daylight, tungsten).

33

Scene mode - Set Auto or Night. Night

mode provides better images in the dark.

Storage medium – Select the storage

location for your photos as internal
telephone memory or memory card
(recommended).

Reset – Reset the camera settings to

default.

Image viewer

View stored images.

1. Press Menu, go to Multimedia and press

OK.

2. Select Image viewer and press OK.

3. Select an image with the navigation

buttons ▲▼◄ ► and press Option.

4. Select one of the following options and

press Select:

View – to display the image.

Image setting – Show in overview as list or

matrix.

Send

As multimedia message – Send image

as MMS. Press Select to create

34

a message; see Create and send
MMS, page 32.

Via Bluetooth – Send image to other

Bluetooth devices; see Bluetooth,

page 85.

Use as - Use image as wallpaper – in

standby mode the photo is displayed as
background behind the clock, or as
background when switching the
telephone on/off.

Umbenennen - Umbenennen des Bildes.
Rename – Rename the image.
Delete - Delete the image.
Sort by – Sort images by name, type, time

or size.

Image information – Display image

parameters.

Video recorder

For clear images clean the lens with a dry cloth.

1. Press Menu, go to Multimedia -> Camera

and press OK or press ▲ (default) to
quickly access the camera and press

Options -> Change to video recorder.

35

2. Press the center button of the navigation
buttons. Use ▲▼ to zoom the image in or
out before recording.

Note!

Zooming can have an impact on the image
quality.

3. Press Back to exit the video recorder
function or press Option for the following

options:

Change to camera – Switch to camera

mode.

Camcorder settings - Set Anti flicker.
Video settings - Set Video quality. You get

best results with Handset high quality.

Note!

We recommend an optional micro­SD card.

Storage medium – Select the storage

location (internal memory or memory
card).

Reset – Reset the video recorder settings

to default.

36

Video player

Display stored videos.

1. Press Menu, go to Multimedia -> Video
player and press OK.

2. Mark a video and press Options for the

following options:

Playback - Video playback. Control

payback with navigation buttons:

Central button = Play/Pause
▲ = Change to full screen
▼ = Stop
◄ = Previous video
► = Next video

* and # = Volume up/down

Send

As multimedia message – Send

video as MMS. Press Select, to
create a message; see Create and
send MMS, page 32).

Via Bluetooth – Send video to other

Bluetooth devices; see Bluetooth,
page 85.

Rename – Rename the video.
Delete - Delete the video.

37

Details – Show creation date and size.
Sort by – Sort according to different

criteria.

Storage medium – Select the storage

location (internal memory or memory card).

File manager

Edit memory card contents.

1. Press Menu, go to Multimedia and press

OK.

2. Select File manager and press OK.

Available storage media are displayed.

3. After selecting the storage location and

pressing Option the following options are
available:

Open - Display directory structure. Options

are: Open, New folder, Rename, Delete,
Sort by, Details.

Format - Format the memory.

CAUTION: All data are deleted.

Details (only available for memory card) –

Information regarding the used memory
card.

38

FM Radio

Listen to radio with your mobile phone.

Note

This function is only available with connected
headset; the cable acts as the aerial.

1. Press Menu, go to Multimedia and press

OK.

2. Select FM radio and press OK.

3. Use the navigation buttons and the central
button (On/Off) for operation.
Use ◄► to select the previous/next
channel. Use ▲▼ for manual fine-tuning.

4. Use * and # to set the volume level.

5. After pressing Option the following options
are available:

Channel list – List saved channels.

Options are: Playback, Delete and Edit.

Manual entry – Enter a frequency

manually (point with # button).

Auto scan – Search and save radio

stations automatically.

39

Settings

Background playback - Select On,

then after exiting the radio menu
the radio still plays. Deactivate

background playback in the FM radio

menu.

Speaker – Select if the speaker is on

when connecting a headset or if
playback is only via headset.

Connect phone to computer

Connect the telephone to a computer to
transfer images and music. Connect the
telephone via the supplied USB cable to the
computer. In the Explorer drag and drop data
between the telephone and the computer to
copy or move.

Note!

Copyrighted material may not be transferred.

40

Move data between telephone and
computer

1. Connect the telephone in on mode via the
supplied USB cable to the computer. On the

mobile phone Mass storage deviceis

displayed. Confirm with OK on the telephone.

2. Wait until the phone/memory card is
displayed as external drive under My
Computer.

3. Drag and drop to copy marked files from
the telephone to the computer or vice
versa.

Note!

While the memory card is activated as an
external drive you have no access to the card
from the phone. Some phone functions such
as the camera may also not be available.
Data transfer via USB cable works for most
devices and operating systems supporting
USB mass storage interface.

Disconnect USB cable safely

1. Ensure that the hardware can safely be
disconnected. Your computer has the

41

respective setting (see icon on task bar).

2. Disconnect the USB cable.

Note!

Do not disconnect the USB cable while data
are transferred; this can cause damages to
the contents. Instructions for the computer
depend on the operating system. Find further
information in the documentation of your
operating system.

Settings

Note!

The settings described in this chapter are
made in standby mode. Press to return
to standby mode.

Signal tones

You can save different profiles (special settings
according to user or environment), which can
be quickly selected.

42

Note

The active profile is ticked off in green. Profile
changes are only applied if the profile is
activated!

1. Press Menu, go to Settings and press OK.

2. Select Signal tones and press OK.

3. Select one of the profiles and press
Option.

4. Select one of the following options and
press Select:

Activate: The profile is activated with the

respective settings.

Adjust: (not available for profile Silent) Edit

settings for the selected profile. Select
one of the following items with ▲▼ and
press Option. Select Change, carry out
the settings and press OK. Press

Option, select Save and press Select

after all settings are done.

Ring type – Select between single

signal and repeat.

Incoming call – Select the melody for

incoming calls.

Ring tone volume - Select the volume

for incoming calls.

43

Message - Select the melody for

incoming messages.

Message tone volume - Select the

volume for incoming messages.

Keypad – Select the tone for pressing

a key or Quiet.

Key tone volume - Select the volume

for pressing a key. Switch on – Select
a melody to be played when turning

on the phone or Quiet.

Switch off - Select a melody to be

played when turning off the phone or

Quiet.

System notification – Select if system

notifications are to be displayed.

Reset: The profile is reset to default.

Phone settings

Time and date

Set time and date

1. Press Menu, go to Settings and press OK.

2. Select Phone settings and press OK.

3. Select Time and date and press OK.

44

4. Select Set hometown and press OK.

5. Select a city from the list and press OK.

6. Select Set time/date and press OK.

7. Enter the time (HH:MM) and press ▼.

8. Enter the date (TT/MM/JJJJ) and press ▼.

9. Press Option -> Select and set if Daylight
saving (summer time) is on/off.

10. Finally press Option -> Save.

Set time and date format

1. Press Menu, go to Settings and press OK.

2. Select Phone settings and press OK.

3. Select Time and date and press OK.

4. Select Set format and press OK.

5. Select a line and press Option -> Select.

6. Carry out the desired settings and press

Option -> Save at the end.

Language

The standard language for the menu,
messages, etc. is determined by the SIM card.
You can select any of the languages supported
by the phone.

1. Press Menu, go to Settings and press OK.

45

2. Select Phone settings and press OK.

3. Select language and press OK.

4. Select a language from the list and press OK.

Preferred input method

Select the preferred input method for
phonebook entries and SMS/MMS. You can
change the method while inputting by pressing
the # button.

1. Press Menu, go to Settings and press OK.

2. Select Phone settings and press OK.

3. Select Preferred input method and press

OK.

4. Select ABC (UPPER CASE / no umlaut),
abc (lower case / no umlaut), Abc (after

full stop first character upper case/ no

umlaut), DE (UPPER CASE), de (lower
case), De (after full stop first character
upper case) or Numbers and press OK.

View

Set the standby display.

1. Press Menu, go to Settings and press OK.

2. Select Phone settings and press OK.

3. Select View and press OK.

46

4. Select Background image and press OK.

5. Select the source of the image and press

OK. System is the phone memory with the
static background images Image 1 and
Image 2. Press View for a preview; to
select press OK. User-defined enables

you to set your own background image
from the memory card.

6. Select the desired file and press OK to
display the image. Press OK to select the
image or press Back to return to the
selection menu.

7. Select Display on or Display off and

select an animation for turning the phone
on/off. Setting is similar to background
image (see above).

8. Select Display date and time and press

OK.

9. Turn the date and time display in standby

mode On or Off and press OK.

Shortcuts

You can place certain own functions on the
navigation buttons ▲▼◄ ►.

1. Press Menu, go to Settings and press OK.

47

2. Select Phone settings and press OK.

3. Select Shortcuts and press OK.

4. Mark an entry (top = ▲ / bottom = ▼ /

left = ◄ / right = ►) and press Edit.

5. Select an entry from the list and press OK.

Flight mode

Flight mode means that the transmission part
of your phone and Bluetooth are turned off. You
cannot make phone calls and you cannot send
or receive SMS or MMS. All other menu
functions are available.

1. Press Menu, go to Settings and press OK.

2. Select Phone settings and press OK.

3. Select Flight mode and press OK.

4. Mark Flight mode or Normal mode and

press OK.

LCD backlight

Set brightness and backlight duration.

1. Press Menu, go to Settings and press OK.

2. Select Phone settings and press OK.

3. Select Misc. settings and press OK.

4. Select LCD backlight and press OK.

48

5. Use ▲▼ to mark Brightness or Duration
(sec) and use ◄ and ► to set the desired

values.

6. Press OK to save and exit the menu.

Call settings

These services partly depend on network
support and subscription. Your network
provider can give you further information.

Call waiting

You can answer more than one call at the same
time. If you receive a call during an active call
you will hear a signal tone and the new call is

displayed. Press Option, select Answer and

then OK to hold the current call and answer the
incoming call.

1. Press Menu, go to Settings and press OK.

2. Select Call settings and press OK.

3. Select Call waiting and press OK.

4. Select one of the following options and
press OK:

Activate - Activate Call waiting.
Deactivate - Deactivate Call waiting.
Retrieve status – Display if Call waiting is

activated/deactivated.

49

Redirect calls

You can redirect calls to answering services or
to a different phone number. Select, which calls
are to be redirected. Select a condition and

press OK, then select Activate, Deactivate or
Retrieve status (see Call waiting, page 60 for

all options).

1. Press Menu, go to Settings and press OK.

2. Select Call settings and press OK.

3. Select Call forwarding and press OK.

4. Select one of the following options and

press OK:

Redirect all voice calls –All voice calls

are forwarded.

Redirect if not available – Incoming calls

are forwarded if the telephone is
switched off or outside the network.

Redirect if no answer - Incoming calls are

forwarded if they are unanswered.

Redirect if busy - Incoming calls are

redirected if the line is busy.

Redirect all data calls - All data calls are

forwarded.

Cancel all call forwarding - All

redirections are turned off.

50

Note:

Forwarding to network provider
voicemail cannot be turned off for all
providers.

Call barring

To restrict the use of your phone certain types
of calls can be barred.

Note!

You must enter a password to activate call
barring. You get this password from your
network provider.

1. Press Menu, go to Settings and press OK.

2. Select Call settings and press OK.

3. Select Call barring and press OK.

4. Select one of the following options and
press OK:

Outgoing calls - Press OK and select:

All calls – You can answer incoming calls

but you cannot make outgoing calls.

International voice calls – You cannot call

international phone numbers.

International voice calls except home -

You cannot call international phone
numbers except the assigned number

51

on the SIM card.

Incoming calls - Press OK and select:

Voice calls during roaming – You

cannot answer calls during roaming
(operation in different network).

Cancel all - Delete all ball barring

(password necessary).

Change barring password – Change

your barring password.

Voicemail

If your network provider has set up a voicemail
box for you (answering machine in the mobile
phone network), then callers can leave a voice
message if you are not answering a call.
Voicemail is a service of your network provider,
which has to be subscribed. Get further
information and the voicemail number from
your service provider.

1. Press Menu, go to Settings and press OK.

2. Select Call settings and press OK.

3. Select Mailbox and press OK.

4. Press Option.
Call: Call voicemail box.

52

Edit: Select Name and Number and

your voicemail box number and press

Option -> Save.

Tip: For calling your voicemail box,

press and hold numeric button 1 for
3 seconds. The voicemail box must
first be set up (name and number).

Advanced Settings

Blacklist
Calls from a phone number in the list (max 20)
are not displayed and answered if the function
is activated.

1. Press Menu, go to Settings and press OK.

2. Select Call settings and press OK.

3. Select Advanced Settings and press OK.

4. Select Blacklist and press OK.

5. Select Reject numbers on blacklist and

press OK.

6. Turn the function On or Off and press OK.

7. Select Blacklist numbers and press OK.

8. Select a storage location, press Edit and

enter the desired number.

9. Finally press Option -> Done.

53

Auto redial

The function automatically redials.

1. Press Menu, go to Settings and press OK.

2. Select Call settings and press OK.

3. Select Advanced settings and press OK.

4. Select Auto redial and press OK.

5. Turn the function On or Off and press OK.

Calling time reminder

With this function activated, you will be
reminded of the elapsed time during a call.

1. Press Menu, go to Settings and press OK.

2. Select Call settings and press OK.

3. Select Advanced settings and press OK.

4. Select Calling time reminder and press

OK.

5. Select one of the following options and
press OK:

Off – Function is deactivated.
Single – Enter a time for a single signal

(1…3000 s).

Regularly - Enter a time for the repeated

signal (30…60 s).

54

Answering mode

Set answering mode for incoming calls.

1. Press Menu, go to Settings and press OK.

2. Select Call settings and press OK.

3. Select Advanced settings and press OK.

4. Select Answering mode and press OK.

5. Select one of the following options and

press Done:

Any button – Incoming calls can be

answered with any button (except the right
softkey and the red end button).

Auto answer in headset mode –

Incoming calls are automatically answered
after a moment if your headset is
connected.

Network settings

Your telephone automatically selects your
network provider if available in your area. If
your network provider is not available, then you
can use a different network if your provider has
a respective agreement with other network
providers. This is called roaming. Your network
provider has further information.

55

1. Press Menu, go to Settings and press OK.

2. Select Network settings and press OK.

3. Select Network selection and press OK.

4. Auto – The network is automatically

selected (default).

Manual - The network is manually

selected. Select the desired provider by
pressing OK.

Caution:

Wrong selection can lead to fees being

charged.

5. Select GPRS connection and press OK.
Select between As required and Always.

6. Select GPRS connection preference and
press OK. Select between Data

preference and Call preference.

Note

GPRS connection is necessary for
sending/receiving MMS.

Security settings

PIN lock

56

You can select if the PIN of the SIM card is
necessary to switch the telephone on. Some
SIM card providers do not allow disabling the
PIN.

1. Press Menu, go to Settings and press OK.

2. Select Security settings and press OK.

3. Select SIM security and press OK.

4. Select PIN lock and press On (left softkey

).

5. Enter the PIN of your SIM card and press

OK.

6. The following message informs you if the

PIN must be entered (Locked) or not
(Unlock).

Change PIN

You can change the PIN for your SIM card. For
this you need the old PIN, which you received
with the documentation for your SIM card.

1. Press Menu, go to Settings and press OK.

2. Select Security settings and press OK.

3. Select SIM security and press OK.

4. Select Change PIN and press OK.

5. Enter the old PIN of your SIM card and

press OK.

57

6. You are prompted to enter the new PIN.

7. This new PIN must be entered twice.

8. If the input was correct, then Done is
displayed and the new PIN is now valid.

Change PIN2

You can change the PIN2 for your SIM card. For
this you need the old PIN2, which you received
with the documentation for your SIM card.

1. Press Menu, go to Settings and press OK.

2. Select Security settings and press OK.

3. Select SIM security and press OK.

4. Select Change PIN2 and press OK.

5. Enter the old PIN2 of your SIM card and
press OK.

6. You are prompted to enter the new PIN2.

7. This new PIN2 must be entered twice.

8. If the input was correct, then Done is

displayed and the new PIN2 is now valid.

Phone lock

If the phone lock is activated you will need the
phone lock code to switch your phone on. Enter
the lock code (default 1122). You can change
this lock code.

58

1. Press Menu, go to Settings and press OK.

2. Select Security settings and press OK.

3. Select Phone security and press OK.

4. Select Phone lock and press On (left

softkey ).

5. Enter the lock code and press OK.

6. The following message informs you if the

phone is locked (Locked) or not (Unlock).

Change lock code

Changing the phone lock code (default 1122).

1. Press Menu, go to Settings and press OK.

2. Select Security settings and press OK.

3. Select Phone security and press OK.

4. Select Change lock code and press OK.

5. Enter the old lock code and press OK.

6. Enter the new lock code twice.

Auto keylock

If the automatic keylock is activated, then the,
keypad is automatically locked after the

selected time. To Unlock press Unlock (left

softkey ) and then the * button.

1. Press Menu, go to Settings and press OK.

2. Select Security settings and press OK.

59

3. Select Phone security and press OK.

4. Select Auto keylock and press OK.

5. Select one of the time periods and press OK.

Connections

Services
Internet service

In this menu you can enter a Homepage
address, manage bookmarks, Search or

enter URL and edit your Data account,
Browser options (delete cookies / delete

authentication info) and Preferences (off
time/display images/ cookies) under Settings.

Special

The content of this menu depends on your
network provider.

Data accounts

This menu contains information for your data
account. It is necessary for using the MMS
function. The settings for MMS are provided by
your service provider and are generally preset
on the mobile phone. For certain mobile
network providers this information might have

60

to be modified manually. The parameters you
can only get from your network provider.

Important

If no data account exists for your service
provider, then you have to add it manually.

1. Press Menu, go to Settings and press OK.

2. Select Connections and press OK.

3. Select Data accounts and press OK.

4. Select the entry of your service provider

and press Option.

5. Select Change standard and press OK.

Now your profile is activated.

Follow the steps below if your service provider
is not included in the list:

1. Press Menu, go to Settings and press OK.

2. Select Connections and press OK.

3. Select Data accounts and press OK.

4. Select any entry and press Option.

5. Select Add PS account and press OK to

display the following settings:

Carry out the settings for your service

provider. He can give you the correct settings.

61

Account name – Add account name.
APN - Add APN address.
User name – Enter user name.
Password – Enter password.
Authentication type – Select

authentication type.

Advanced settings (enter sub-menu with
Option -> Edit -> Select)

Homepage – Enter homepage.
Connection type – Select type of

connection HTTP or WAP.

Use proxy – Select if a proxy server is

to be used.

Proxy address – Enter proxy server

address.

Proxy port - Enter proxy port.
Proxy user name - Enter proxy user.
Proxy password - Enter proxy

password.

Primary DNS - Address of primary DNS

server.

Secondary DNS - Address of

secondary DNS server.

IP address – IP address provided by

network provider.

62

Subnet mask – Subnet mask provided

by network provider.

3. Finally press Option -> Save.

4. Select your new profile and press Option.

5. Select Change standard and press OK.

You can also activate or change an MMS data
account by selecting one and pressing Option

to Delete the account or Change standard.

Note!

For some service providers you must first
send an MMS message yourself before you
can receive MMS messages. Send an MMS
only with text to activate the service. Some
service providers must be contacted before
the MMS function is activated on your mobile
phone. Contact the customer service of your
service provider.

Reset to factory settings

Reset phone to default settings.

1. Press Menu, go to Settings and press OK.

2. Select Reset and press OK.

3. Enter the phone lock code (default 1122)
and confirm reset.

63

Important

Reset deletes all contacts in the phone

memory. Backup your contacts or note
them down. Contacts on your SIM card
are not deleted.

SMS settings

1. Press Menu, go to Messages and press

OK.

2. Select Message settings and press OK.

3. Select Text message and press OK.

4. Select one of the following items and press

Select:

SIM

SMSC address - This number is needed

for the SMS function. The number of
your SMS center is provided by your
network provider and is usually preset
in the SIM card. The number of your

SMS center is displayed if it is stored
on the SIM card. If not, you have to
enter it manually. Get further
information from your network provider.

Send report- Select if your mobile

phone displays that your sent SMS

64

was transmitted to the mobile phone of
the recipient (this does not mean that
the SMS was read).

Note! If Send report On is
selected, some service providers
charge for this message. In all
German mobile phone networks
the send report is free of charge
(as of 01.03.2014).

Answer path - (no function in German

mobile networks)

Memory status – Display available/

occupied memory for SMS on SIM card
and telephone.

Sent messages – Select if sent SMS are

saved (On) or not (Off) in the Sent
folder.

Storage location – Select storage location

for received SMS (SIM/phone).

Long text message – Select to activate

the function long text messages. A “long
text message” consists of up to 624
characters and is, depending on the

65

network provider, split in 4 “short” SMS
and sent; all are separately charged.

SMS blacklist – If activated, then SMS

from numbers on the list are rejected

(max 20). Under Status press the left
softkey to turn the function On or
Off and enter the desired sender
numbers in SMS blacklist.

MMS settings

1. Press Menu, go to Messages and press

OK.

2. Select Message settings and press OK.

3. Select Multimedia message and press OK.

4. Select one of the following items and press

OK:

Data account – Select the correct data

account for your service provider and press
OK to confirm.

Note: These settings are needed for
the SMS function. The settings for
MMS are provided by your network
provider. For setting up a new account
or for changes see Data accounts,
page 76.

66

General settings

Compose – Setting options for Slide

interval, Creation modes, Auto
signature and Signature.

Is sent - Setting options for Send report,

Read report, Priority, Send time and
Send and save.

Recovery- Setting options for Home

network, Roaming, Filter, Read report
and Send report.

Storage location – Select storage

location (telephone/memory card).

Memory status - Display available/

occupied memory for MMS.

Service notification

In this menu you can set how to deal with

service messages (Activate push/ Activate
load from service).

Bluetooth®

IMPORTANT

If you do not use Bluetooth connections, select

Activation / Off. Do not pair with unknown

devices.

67

You can set up a wireless connection to other
compatible Bluetooth devices such as headsets.

1. Press Menu, go to Bluetooth and press

OK to display the following settings:

Activation – Turn the function On or Off

with the left softkey

.

Visibility - Turn the function On or Off with

the left softkey .

My device - Press OK and select one of

the following options:

Request new device – Starts searching

for available devices.

[Device xy] - Press Option for the

following options:

Service list – Display, which

Bluetooth protocols (services) are
supported with this connection.

Rename – Change device name.

Authorize – Set connection options

for this device.

Important

For hands-free devices in cars
authorization can be very helpful.

68

Authorize the hands-free device in
your car in this item to avoid
manual connection/pairing each
time after leaving the car or
switching the device on or off.

Select in Authorize the central
item Always connect.

Delete – Delete the device from the

list.

Delete all – Delete entire list.

Request audio device – Search for

available devices only supporting audio
transmission (headsets, external audio
players, etc.).

Change device name – Change name of

device.

Advanced – Setting option for Audio path

during the connection (Leave on

telephone or Forward to Bluetooth
headset), select Storage medium and
display own Bluetooth address.

69

Calendar

1. Press Menu, go to Calendar and press

OK. Use the navigation buttons ▲▼◄

► to move the cursor on the calendar.

2. Press Option or the central button of the

navigation buttons.

3. Select one of the following options and

press Select:

Go to date – Enter the date and press OK.
Go to today – Shows today’s date on the

calendar.

Go to weekly view/monthly view –

Switch display between weekly and
monthly view.

Extras

Torch

1. Press Menu, go to Options and press OK.

2. Select Torch.

3. Press the left softkey or the central
button of the navigation buttons to switch

the torch On or Off.

70

Alternatively:

Press and hold the right softkey ( with
torch icon) for 3 seconds to switch the
torch on/off.

Alarm

1. Press Menu, go to Options and press OK.

2. Select Alarm and press OK.

3. Select an entry from the list and press

Edit. The current setting is displayed.

4. Mark the line under Status and press
Option. Select Select and switch the
alarm On or Off.

5. Mark the line under Time and enter the

alarm time via the keypad.

6. Mark the line under Snooze and press
Option. Select Select and select one of

the possible durations.

7. Mark the line under Repeat and press
Option. Select Select and carry out the

desired settings. For a single alarm select

Once and press OK. For daily repeated
alarm select Daily and press OK. For

repeated alarm at certain days of the week
select Days and press OK. Scroll through

71

the list of days and press Option/ On/Off to
enable/disable the alarm for the respective
day of the week, finally select Option ->

Done and press Select.

8. Mark the line under Alarm tone and press
Option. Select Select, mark a ring tone

and press OK.

9. Finally press Option again and select Save.

Calculator

The calculator can do basic calculations.

1. Press Menu, go to Options and press OK.

2. Select Calculator and press OK.

3. Enter the first number. Enter the decimal
point with the # button.

4. Use the navigation buttons ▲▼◄ ►to
select the function (+, -, x, /).

5. Enter the next number and select the
function.

6. Repeat steps 3 to 5 if necessary.

7. Press the central button of the navigation
buttons to calculate the result.

8. Press Delete to reset the calculator.

72

Appendix

Safety precautions

CAUTION

The device and its accessories may contain
small parts. Keep the device out of reach of
small children. The power supply serves to
disconnect the product from mains power.
The power outlet must be in the immediate
vicinity of the device and must be easily
accessible at all times.

Network services and network costs

The device is approved for GSM 900/1800 MHz
networks. A SIM card must be inserted, so that
the device can be used. The SIM card must be
activated by the network provider.
Using network service can lead to charges.
Some functions are only available and charged
for when subscribed.

Operating environment

Observe all regulations at the respective site,
and switch the device off if its use is prohibited

73

or may cause interference or hazards. Use the
device always in its normal use position.
The device complies with the radiation
directives if held in normal position at the ear or
at least 1.5 cm from the body.
If you carry the device close to your body in a
pocket, belt pocket or the like, then these are
not to contain any metal parts and the products
must be carried at above distance from the
body. Ensure that these regulations are
complied with when the mobile phone is in
operation (exception flight mode ­Send/Receive is disabled).
Some parts of the device are magnetic. Metal
objects can be attracted. Do not store credit
cards or other magnetic data devices in the
immediate vicinity of the device.The stored
information can get damaged.

Medical devices

The use of radio devices, such as mobile
phones, can interfere with the operation of
medical devices if they are not sufficiently
shielded. Contact a doctor or the device
manufacturer to find out if the device is

74

sufficiently shielded. Switch your mobile phone
off if the hospital or doctor’s practice prohibits
the use of such devices.

Pacemakers

Manufacturers of pacemakers recommend a
distance of at least 15 cm between a mobile
phone and the pacemaker to avoid
interference. Persons with a pacemaker should
observe the following:

• Always hold the phone at least 15 cm away
from your pacemaker when the telephone
is switched on.

• Do not carry the telephone in a breast pocket.

• Use the ear opposite the pacemaker to
avoid interference.

Turn the telephone off if interference is suspected.

Explosive areas

Turn the telephone off in explosive areas. Follow
all directions. There is usually danger of
explosion if you have to turn off the engine of
your car. Sparks can cause explosion or fire;
danger of injury and death. At filling stations and
in locations with petrol pumps and car workshops

75

turn the device off. Observe limitations for the use
of radio devices in locations where fuel is stored
and sold, in chemical factories and in blast areas.
Explosive areas are often – but not always –
clearly marked. This also applies for ships,
transport or storage of chemicals, liquid gas
propelled vehicles (propane or butane), as well
as for areas where chemicals or particles such as
fibers, dust or metal powder could be contained
in the air.

Hearing protection

This device was tested and complies with the
requirements for noise pressure level according
to standards EN 50332-1 and/or EN 50332-2.

WARNING

Loud noise over a longer period of
time can cause hearing damage.
Loud noise while driving a vehicle
can distract from traffic and cause
accidents.
Enjoy music via headset at moderate
volume. Do not hold the device too
close to your ear when using the
speaker.

76

Emergency calls

IMPORTANT

Mobile phones use radio signals, the mobile
phone network, landlines and user­programmed functions. This means that
connection is not guaranteed under all
conditions. Never rely solely on a mobile phone
when very important calls, such as in medical
emergencies, may be necessary.

Vehicles

Radio signals can interfere with the electronics
of motor vehicles (e.g. electronic fuel injection,
ABS brakes, cruise control, airbags), if these
are not properly installed or not sufficiently
shielded. For further information about your
vehicle or optional accessories contact the
manufacturer.
Do not store or transport flammable liquids,
gases or explosives together with the device.
For vehicles with airbags: Consider that during
an accident airbags are filled forcefully with air.
Do not place any objects, including stationary
or mobile radio devices, directly above the

77

airbag or in the inflation area. In case of
improper installation of the mobile phone
inflating airbags can cause serious injuries.
In airplanes the use of mobile phones is
prohibited. Switch the device off or into flight
mode before boarding a plane. The use of
wireless telecommunication devices in planes
can endanger air safety and interfere with on­board telecommunication. It is also prohibited
by law.

Cleaning and Maintenance

Your telephone is a sophisticated product and
must be treated with care. Negligence can void
your warranty.

• Protect the device from water. Rain/snow,
humidity and all kinds of liquids can contain
substances, which corrode the electronic
components. Remove the battery and let
the device dry out completely in case it
should get wet.

• Do not store the device in dusty, dirty
surroundings. Movable and electronic parts
can be damaged.

78

• Protect the device from extreme heat. High
temperatures can decrease the lifespan of
electronic components, damage the battery
and deform or even melt plastic parts.

• Protect the device from extreme cold.
Condensate can form and damage
electronic components when the device
warms up to normal temperature.

• Open the device only as described in this
manual.

• Do not drop the device. Protect it from
shock and vibration. Rough handling can
cause damage to conductors and
mechanical parts.

• Do not clean the device with aggressive
substances.

This information applies to the device, the
battery, the power supply and other
accessories. Contact your dealer if there are
problems with your phone. Have proof of
purchase or an invoice copy at hand.

79

Warranty and Service Information

In case you need support during setup or
usage of your mobile phone you will find the
relevant contact details on the following
website: www.primobydoro.com/support

If you detect a defect resulting from
manufacturing and/or material faults within
24 months from purchase, please contact
your dealer.

The warranty does not apply for improper
treatment or failure to comply with information
contained in this user guide, for interference on
device executed by dealer or user (e. g.
installations, software downloads,…) and for
total loss. Furthermore it does not apply to
ingress of liquids, use of force, non­maintenance, improper operation or other
circumstances caused by the user. It also does
not apply to failure caused by a thunderstorm
or any other voltage fluctuations. The
manufacturer reserves the right in this case to
charge the customer for replacement or repair.
For wear parts such as batteries, keyboard or

80

casing a restricted warranty period of 6 months
is valid. Manuals and possibly supplied
software are excluded from this warranty.
Further or other claims arising from the
manufacturer's warranty are excluded. Thus,
there is no liability claim for business
interruption, loss of profits, loss of data,
additionally installed software by user or other
information. The receipt with purchase date
forms the warranty proof.

Technical specifications

Triband GSM 900 / 1800
Display: 2.0” 220 x 176 pixels
Camera: 0.3MP
Further functions: MMS, Bluetooth, radio, torch
Battery: Rechargeable Li-ion battery, 3.7V, 800mAh
Talk time: up to 3 hours
Standby time: up to 6 days
Dimensions: 109 x 46 x 18 mm
USB port: Micro USB
microSD card: type SD or SDHC, max 16GB
Headset port: 3.5mm jack

Bluetooth® is a registered trademark of
Bluetooth SIG, Inc.

81

Specific absorption rate (SAR)

This device complies with the international
safety regulations for exposure to radio waves.
Primo 305 by Doro measures
GSM900: 0.647W/kg (10g head) DCS1800:

0.245W/kg (10g head)
The upper limit according to WHO is 2.0W/kg
measured for 10g tissue.

Approval and conformity

This mobile phone complies with the relevant
requirements of R&TTE directive 1999/5/EG
regarding radio systems and telecommunication
end equipment and is suitable for connection
and operation in the country where it was
purchased. You can download the Declaration of
Conformity from the following website:

http://www.ivsgmbh.de/de/support/
downloadsauswahl/

The conformity of the telephone with
above directive is confirmed by the
CE mark.

2200

Internet:

www.ivsgmbh.de

© IVS GmbH 2014
All rights reserved