DORO Matra Congress 100 User Manual [fr]
English
French
Polish
CONGRESS 100
Business Telephone
Téléphone Professionnel
Rozbudowany aparat biznesowy
User guide
Manuel d'utilisation
Instrukcja obsługi
English (see page 4-9)
1 Hook switch
2 Volume control for
handset/headset
3 Redial button
4 Recall button
5 Pause button
6 Memory button
7 Hold button and LED
8 Headset button and LED
9 Store/Mute button and LED
10 Number keys 0-9, *, #
11 Ring/Message Wait Indicator
Français (voir page 10-14)
1 Pédale de raccroché
2 Réglage du volume combiné/
casque
3 Touche Bis
4 Touche R
5 Touche Pause
6 Touche de sélection directe
7 Touche et LED de mise en garde
8 Touche et LED casque
9 Touche Programmation et secret
+ LED
10 Touches numérotées 0-9, *, #
11 Témoin lumineux de sonnerie
Polski (zobacz strony 16-20)
1 Miejsce na słuchawkę
2 Regulator głośności słuchawki/
zest. nagłownego
3 Przycisk powtórnego wybierania
4 Przycisk „Recall”
5 Przycisk pauzy
6 Przycisk skróconego wybierania
7 Przycisk i kontrolka zawieszenia
8 Przycisk i kontrolka zestawu
nagłownego
9 Przycisk i kontrolka zapisu/
wyciszania
10 Klawisze z cyframi 0-9, *, #
11 Sygnalizator dz wonienia
www.doro.com 3
English
English
Installation
Connection
1. Connect the curly cord to the handset and the socket marked HANDSET
underneath the telephone.
2. Connect the telephone cord to the socket marked LINE underneath the
telephone, and then to the telephone network socket.
3. A click will be heard when the modular plug is correctly in place.
4. Lift the handset and listen for the dial tone. Your telephone is now
operational.
Hearing Aid compatible
This telephone is hearing aid compatible. Select T mode on the hearing aid to
enable coupling.
Connection of headset
The socket underneath the telephone marked HEADSET is used for the
connection of a headset. The headset button = is for connecting/disconnecting
a telephone call (equivalent to lifting and putting down the handset) when a
headset is connected.
Please note!
DORO original headsets are tested and adapted to DORO Congress 100. Other types
and makes of headsets may be used, though the function and sound quality can not be
guaranteed.
Any damage occurring due to incompatible or non Doro headsets being installed, will not
be covered under the telephones guarantee.
Operation
Mute button
The handset/headset microphone can be muted during a call by pressing the
mute button z . Press the mute button again to activate the microphone. The
LED next to the button fl ashes when the microphone is muted.
Making a call with the headset
1. Press the headset button = . A dialling tone will be heard in the headset and
the LED next to the headset button will illuminate.
2. DIAL the NUMBER required.
3. Press the headset button again to terminate the call.
Redial button
If the number dialled is engaged or if the last number dialled is to be redialled,
lift the receiver or press the headset button =.
Press the redial button r.
On Hold
Press the hold button h to place a call on hold. The LED next to the button
will illuminate. The call can be resumed by pressing the hold button again or
from another telephone connected to the same line.
When a call is connected.
Press the button h to hold the telephone call. The LED above the button
will illuminate.
To resume the telephone call, lift any receiver.
Connection of additional equipment
On the left side of the telephone there is a socket marked TERMINAL. This is
used for connecting additional telephone equipment to the same telephone line,
e.g. a wireless telephone, modem, etc.
4 www.doro.com
Recall
Press the recall button R followed by the extension number to transfer calls
when connected to a PBX.
Access to additional network services can be gained by using the recall button R,
* and # keys. Contact your network operator for more information.
www.doro.com 5
English
English
Settings
Memory
This telephone has 10 indirect memories (0 9).
When a number is stored in a memory location, you need to press only two
buttons to make the call.
Storing numbers
1. Lift the receiver and press store button
2. Press memory button
m.
3. Select memory location by pressing one of the number keys
4. Enter the phone number (max 21 digits).
5. Press store button
P and replace the receiver. The number is now stored.
Calling using memory locations
1. Lift the receiver (or press the headset button) and wait for a dialling tone.
2. Press memory button
m.
3. Select memory location by pressing any of the number keys
A pause may be inserted into the telephone number by pressing P.
Enter the name of the call receiver on the memory card, if desired. In case of a number change,
replace the old number with the new.
P (ignore the dialling tone).
0 9.
0 9.
Settings
Volume control
The volume level in the earpiece can be increased or decreased using the volume
buttons during a call (5 steps). Use the volume up button $ to increase the
volume and the volume down button £ to decrease the volume.
Ringer
1. Lift the receiver (ignore the dialling tone) and press the store button P
and #.
2. Select ring signal by pressing the number keys
table below.
3. Press store button
P and replace the receiver. The ring signal is now set.
Key/setting Melody type Ringer level
1.......................................... Melody A........................ Low
2.......................................... Melody A........................ Normal
3.......................................... Melody A........................ High
4.......................................... Melody B........................Low
5.......................................... Melody B........................Normal
6 (factory setting)................ Melody B........................ High
7.......................................... Melody C .......................Low
8.......................................... Melody C .......................Normal
9.......................................... Melody C .......................High
0.......................................... Off * ...............................-
0 9 in accordance with the
6 www.doro.com
* If the key 0 is selected, the ring signal will be turned off until the next time the receiver is
lifted. After that, the ring signal will revert to the previous setting.
www.doro.com 7
Loading...