DoorKing 6004, 6002, 6400, 6003, 6050 Reference Manual

...

April 2015 Vehicular Gate Operators

Date

Page

Comment

4-1-15

All

April, 2015 reference guide update.

Section A1

Vehicular Gate Operators - Reference Guide

For current pricing, please use our Dealer Portal. http://doorking.com/dealer-distributor

Specifications subject to change without notice. Section A1, Page 1

Vehicular Gate Operators April, 2015

Solar Tax Credit

Homeowners who purchase a solar powered gate operator manufactured by DoorKing, Inc. after December 31, 2008, may qualify for a 30% Federal Tax Credit off the installed cost of the system. This tax credit is available for the installed

cost of the solar powered gate operator on the homeowner’s Federal tax return.

The solar powered Gate Operator is considered a "Qualified Solar Electric Property" authorized by the Internal Revenue Code Section 25D under the definition provided in paragraph d.2 and as such qualifies for the Residential Energy Efficient Tax Credit. You will need to complete Federal Form 5695 and attach it to your personal tax return in order to claim this credit. If you have any questions regarding this Federal Tax Credit, Form 5695 or its instructions, please consult your tax adviser. You should also check with your state tax agency to see if your state offers any additional solar energy tax incentives.

What is Covered:

The solar system tax credit applies to the total installed cost of the solar gate operator system. This includes the related solar panel, gate operator, solar control box, access control device, remote controls, obstruction detection device(s), etc.

DoorKing Model 6002 Swing Gate Actuator (P/N 6002-080)* DoorKing Model 6003 Swing Gate Actuator (P/N 6003-080)* DoorKing Model 6004 Swing Gate Operator (P/N 6004-080)* DoorKing Model 6400 Swing Gate Operator (P/N 6400-080)* * To qualify, must be installed with 4302‐113, 4302‐114 or 4302‐115 Solar Control Box

DoorKing Basic Solar Control Box (P/N 4302-113) DoorKing Single Gate Solar Control Box (P/N 4302-114) DoorKing Dual Gate Solar Control Box (P/N 4302-115)

DoorKing Solar Panel (P/N 2000-076 or 2600-077)

Batteries; two (2) 18 Amp Hour (P/N 1801-004) or two (2) 35 Amp Hour (P/N 1801-005)

What is Not Covered:

The cost of the gate itself, or work required to place the physical gate into proper working order (leveling, replacing hinges, etc.).

Qualifications:

• The installation of a DoorKing Solar Powered Gate System

• Effective for tax years beginning after December 31, 2008

• Homeowners will need to use The Federal Tax Credit form 5695, Residential Energy Efficient Property Credit

• Homeowners will need to provide a copy of the "Manufacturer's Certification for Credit"

• The dwelling must be located in the United States and used as a residence by the taxpayer

• This offer is only available in the United States

Section A1, Page 2 Specifications subject to change without notice.

April 2015 Vehicular Gate Operators

Page Rev 4/1/15

Table of Contents

Swing Gate Operators

Model 6002 / 6003 ................................................................................................................................................. 4

Model 6004 / 6400 ................................................................................................................................................. 5

Model 6050 / 6100 ................................................................................................................................................. 6

Model 6300 ............................................................................................................................................................ 7

Model 6500 ............................................................................................................................................................ 8

Model 6524 ............................................................................................................................................................ 9

Model 6550 .......................................................................................................................................................... 10

Swing Gate Accessories ........................................................................................................................................ 11

Swing Gate Operator Parts & Accessories ............................................................................................................ 12

Slide Gate Operators

Model 9050 / 9100 ............................................................................................................................................... 14

Model 9150 .......................................................................................................................................................... 15

Model 9000 .......................................................................................................................................................... 16

Model 9024 .......................................................................................................................................................... 17

Slide Gate V-Wheels ............................................................................................................................................. 18

Slide Gate Guide Rollers & Accessories ................................................................................................................ 19

Slide Gate Operator Parts & Accessories .............................................................................................................. 20

Entrapment & Vehicular Reversing Devices

Entrapment Protection Devices Type B1 and B2 .................................................................................................. 22

Loop Detectors and Loops .................................................................................................................................... 23

Gate Operator Accessories

Gate Operator Control Stations ............................................................................................................................ 24

Postal and Fire Department Lock Boxes ............................................................................................................... 25

Time Clocks, Surge Suppressers, Traffic Signal ..................................................................................................... 26

Accessory Transformers ....................................................................................................................................... 27

Back-up Power Inverters

Model 1000 .......................................................................................................................................................... 28

Specifications subject to change without notice. Section A1, Page 3

Vehicular Gate Operators April, 2015

Page Rev 4/1/15

Maximum Cycles on Backup Power**

3.5 Ah

18 Ah

35 Ah

6002

500

100

600

1200

6003

300

100

600

1200

Models 6002 / 6003

24 Volt DC Swing Gate Actuators

Swing gate actuators are designed to operate vehicular swing gates in residential applications where side room is minimal. These actuators install directly on the swing gate and operate on 24 Volt DC power. Control boxes are designed for both single and dual (bi-parting) gate operation and are powered by 120 VAC or 24 VDC with Solar power input.

Step 1: Choose an Actuator

6002-080 (24 VDC)

6003-080 (24 VDC)

Step 2: Choose a Control Box

4302-111 Standard Control Box (120 VAC)

4302-112 Deluxe Control Box (120 VAC)

• 120 VAC control boxes include two (2) 3.5 Ah batteries

• Deluxe control box includes three 120 VAC

convenience outlets

4302-113 Solar Control Box (No Batteries)

4302-114 Solar Control Box (w/two 18 Ah batteries)

4302-115 Solar Control Box (w/two 35 Ah batteries)

2000-077 24 Volt, 10 Watt Solar Panel

• Use with 18 Ah batteries

2000-076 24 Volt, 20 Watt Solar Panel

• Use with 35 Ah batteries

Accessories

Entrapment prevention devices (required) ..................... Pg 20

Loops and loop detectors ............................................... Pg 21

8040-080 Ultra Low Power RF Receiver

2000-110 Solar Panel Mount Bracket

2600-755 30-ft. Bi-parting gate connection cable

2600-756 40-ft. Bi-parting gate connection cable

2600-757 50-ft. Bi-parting gate connection cable

Swing gate accessories ..............................................Pg 10-11

Gate operator accessories .........................................Pg 22-24

Model

** Cycles shown are for single operators when solar panel(s) are not providing a charge to the batteries. Actual number of cycles will vary

depending on usage, accessories connected, gate weight, operating condition of gate, te mperature, location, weather (cloud coverage) and charge state of the batteries.

Section A1, Page 4 Specifications subject to change without notice.

Max Gate

Weight (lbs.)

Max Gate

Width (ft.)

Max Cycles

(day)

April 2015 Vehicular Gate Operators

Page Rev 4/1/15

Maximum Cycles on Backup Power**

3.5 Ah

18 Ah

35 Ah

6004

500 8 100

100

600

1200

6400

300 8 100

100

600

1200

Models 6004 / 6400

24 Volt DC Swing Gate Operators

The DKS Model 6004 mounts directly on the gate column while the DKS 6400 installs in-ground making it virtually invisible. These units operate on 24 Volt DC power. Control boxes are designed for both single and dual (bi-parting) gate operation and are powered by 120 VAC or 24 VDC with Solar power input.

Step 1: Choose an Operator

6004-080 (24 VDC)

6400-080 (24 VDC)

Step 2: Choose a Control Box

4302-111 Standard Control Box (120 VAC)

4302-112 Deluxe Control Box (120 VAC)

• 120 VAC control boxes include two (2) 3.5 Ah batteries

• Deluxe control box includes three 120 VAC

convenience outlets

4302-113 Solar Control Box (No batteries)

4302-114 Solar Control Box (w/two 18 Ah batteries)

4302-115 Solar Control Box (w/two 35 Ah batteries)

2000-077 24 Volt, 10 Watt Solar Panel

• Use with 18 Ah batteries

2000-076 24 Volt, 20 Watt Solar Panel

• Use with 35 Ah batteries

Accessories

Entrapment prevention devices (required) .....................Pg 20

Loops and loop detectors................................................Pg 21

8040-080 Ultra Low Power RF Receiver

2000-110 Solar Panel Mount Bracket

2600-755 30-ft. Bi-parting gate connection cable

2600-756 40-ft. Bi-parting gate connection cable

2600-757 50-ft. Bi-parting gate connection cable

Swing gate accessories .............................................. Pg 10-11

Gate operator accessories ........................................ Pg 22-24

Model

** Cycles shown are for single operators when solar pa nel(s) are not providing a charge to the batteries. Actual number of cycles will vary

depending on usage, accessories connected, gate weight, operating condition of gate, temperature, location, weather (cloud coverage) and charge state of the batteries.

Specifications subject to change without notice. Section A1, Page 5

Max Gate

Weight (lbs.)

Max Gate

Width (ft.)

Max Cycles

(day)

Vehicular Gate Operators April, 2015

Model 6050 / 6100 Maximum Capacities

Model

Max Gate

Weight (Lbs)

Max Gate

Width (Ft)

Max Cycles

(Per Day)

6050

400

100

6100

500

Cont

6100 w/C.O.

400

Cont

Page Rev 4/1/15

Models 6050 / 6100

Automatic Limit Swing Gate Operators

These operators can be installed on mounting posts or directly onto a concrete mounting-pad. When ordering, choose both an operator AND an operator mounting kit. Secondary operators are used in bi-parting (dual) gate applications and are commanded from and powered from the primary operator. Secondary operators cannot be used as a stand-alone device.

Step 1: Choose an Operator or Operator Set

6050-080 1/2 HP, 115V (4.3A) Primary

6050-081 1/2 HP, 115V (4.3A) Secondary

• Secondary includes 30-ft interconnection cable

6100-080 1/2 HP, 115V (5.4A) Primary

6100-081 1/2 HP, 115V (5.4A) Secondary

6100-082 1/2 HP, 115V (5.4A) Primary w/C.O.

6100-083 1/2 HP, 115V (5.4A) Secondary w/C.O.

• Secondary includes 40-ft interconnection cable

• C.O. = Convenience Open (gate opens upon AC power

loss)

Step 2: Choose an Arm / Mounting Kit(s)

2600-671 Pad Mount, Arms and Hardware Kit

2600-674 Post Mount, Arms and Hardware Kit

Accessories

Entrapment prevention devices (required) ..................... Pg 20

Loops and loop detectors ............................................... Pg 21

Backup power inverters .................................................. Pg 26

1601-154 Heater Kit

• Use if temperature routinely falls below 10°F (-12°C)

6500-490 Uphill Arm Pivot Assembly

• Use with 1203-084 Torsion Rod Assembly (Pg 10)

Swing gate accessories ..............................................Pg 10-11

Gate operator accessories .........................................Pg 22-24

Section A1, Page 6 Specifications subject to change without notice.

April 2015 Vehicular Gate Operators

Model 6300 Maximum Capacities

Model

Max Gate

Weight (Lbs)

Max Gate

Width (Ft)

Max Cycles

(Per Day)

1/2 HP

700

Cont

1/2 HP w/C.O.

600

Cont

1 HP

800

Cont

1 HP w/C.O.

700

Cont

Page Rev 4/1/15

Model 6300

Automatic Limit Swing Gate Operators

Designed to operate large vehicular swing gates in residential, commercial and industrial applications. These operators can be installed on mounting posts or directly onto a concrete mounting-pad – select mounting kit when ordering. Secondary operators are used in bi-parting (dual) gate applications and cannot be used as a stand-alone device.

Step 1: Choose an Operator or Operator Set

6300-080 1/2 HP, 115V (5.4A) Primary

6300-081 1/2 HP, Secondary

6300-082 1/2 HP, 115V (5.4A) Primary w/C.O.

6300-083 1/2 HP, Secondary w/C.O.

• Secondary includes 50-ft interconnection cable

• C.O. = Convenience Open (gate opens upon AC power

loss)

6300-084 1 HP, 115V (9.7A) Primary

6300-085 1 HP, Secondary

6300-086 1 HP, 115V (9.7A) Primary w/C.O

6300-087 1 HP, Secondary w/C.O.

• Secondary includes 50-ft interconnection cable

• C.O. = Convenience Open (gate opens upon AC power

loss)

Step 2: Choose a Mounting Kit(s)

2600-264 Pad Mount, Arms and Hardware Kit

2600-263 Post Mount, Arms and Hardware Kit

High Voltage Kit

2600-266 High Voltage Kit

• Allows the operator to be powered from 208, 230, 460

or 575 source voltage. In dual gate applications, only one (1) kit is required (secondary operator DOES NOT require a high voltage kit).

Accessories

Entrapment prevention devices (required) .....................Pg 20

Loops and loop detectors................................................Pg 21

Backup power inverters ..................................................Pg 26

1601-154 Heater Kit 115 VAC

1601-197 Heater Kit 208/230 VAC

1601-198 Heater Kit 460 VAC

6500-490 Uphill Arm Pivot Assembly

• Use with 1203-084 Torsion Rod Assembly (Pg 10)

Swing gate accessories .............................................. Pg 10-11

Gate operator accessories ........................................ Pg 22-24

Specifications subject to change without notice. Section A1, Page 7

Vehicular Gate Operators April, 2015

Model 6500 Maximum Capacities

Model

Max Gate

Weight (Lbs)

Max Gate

Width (Ft)

Max Cycles

(Per Day)

1/2 HP

700

Cont

1/2 HP w/C.O.

600

Cont

1 HP

800

Cont

1 HP w/C.O.

700

Cont

Page Rev 4/1/15

Model 6500

Adjustable Limit Swing Gate Operators

Designed to operate large vehicular swing gates in residential, commercial and industrial applications. Secondary operators are used in bi-parting (dual) gate applications cannot be used as a stand-alone device.

Operators

6500-080 1/2 HP, 115V (5.4A) Primary

6500-081 1/2 HP, Secondary

6500-082 1/2 HP, 115V (5.4A) Primary w/C.O.

6500-083 1/2 HP, Secondary w/C.O.

• Secondary includes 50-ft interconnection cable

• C.O. = Convenience Open (gate opens upon AC power

loss)

6500-084 1 HP, 115V (9.7A) Primary

6500-085 1 HP, Secondary

6500-086 1 HP, 115V (9.7A) Primary w/C.O

6500-087 1 HP, Secondary w/C.O.

• Secondary includes 50-ft interconnection cable

• C.O. = Convenience Open (gate opens upon AC power

loss)

High Voltage Kit

2600-266 High Voltage Kit

• Allows the operator to be powered from 208, 230, 460

or 575 source voltage. In dual gate applications, only one (1) kit is required (secondary operator DOES NOT require a high voltage kit).

Accessories

Entrapment prevention devices (required) ..................... Pg 20

Loops and loop detectors ............................................... Pg 21

Backup power inverters .................................................. Pg 26

6500-480 Heater Kit 115 VAC

1601-197 Heater Kit 208/230 VAC

1601-198 Heater Kit 460 VAC

6500-490 Uphill Arm Pivot Assembly

• Use with 1203-084 Torsion Rod Assembly (Pg 10)

Swing gate accessories ..............................................Pg 10-11

Gate operator accessories .........................................Pg 22-24

Section A1, Page 8 Specifications subject to change without notice.

April 2015 Vehicular Gate Operators

Page Rev 4/1/15

Maximum Cycles on Backup

Power**

7.5 Ah

18 Ah

800

Continuous

150

Model 6524

Adjustable Limit DC Swing Gate Operator

The model 6024’s main power source is 115 or 230 Volt (switch selectable) single-phase AC power. The operational voltage of the operator is 24 Volt DC and includes built-in battery backup (7.5 AH battery x 2) that provides continued gate operation if the main source power is lost. This operator is designed to operate vehicular swing gates in residential and light commercial applications.

Operator

6524-080 1/2 HP, 24V DC (1.8A / 0.9A)

• 115 or 230 VAC Input power

6524-081 1/2 HP, 24V DC (8.5A)

• 24 VDC Solar Input power only (supply your own

batteries and solar system or use DKS solar kit)

Options

1801-004 12-Volt, 18 Amp Hour Battery

• Two (2) required.

Accessories

Entrapment prevention devices (required) .....................Pg 20

Loops and loop detectors................................................Pg 21

Backup power inverters ..................................................Pg 26

6550-480 Heater Kit 115 VAC

1601-197 Heater Kit 208/230 VAC

• Heaters are active only when AC source power is

present

6500-490 Uphill Arm Pivot Assembly

• Use with 1203-084 Torsion Rod Assembly (Pg 10)

Swing gate accessories .............................................. Pg 10-11

Gate operator accessories ........................................ Pg 22-24

Max Gate

Weight (lbs.)

** Actual number of cycles will vary de pending on usage, accessories connected, gate weight,

operating condition of gate, temperature and charge state of the batteries.

Specifications subject to change without notice. Section A1, Page 9

Max Gate

Width (ft.)

Max Cycles

AC Power

+ 19 hidden pages

DoorKing 6004, 6002, 6400, 6003, 6050 Reference Manual

Specifications and Main Features

Frequently Asked Questions

User Manual