DoorKing 1602-162, 1602-166, 1602-172, 1602-164, 1602-176 Quick Start Manual
...
3-PIECE ROUND ALUMINUM ARM KITS
These kits are designed ONLY for the 1602 model barrier gate operator with or without LED lights.
Clip around counterweights
before srewing cover on.
Counterweight
Mounting Plate
Hardware x 4
Hex Nut 3/8”
Washer 3/8”
Lockwasher 3/8”
H
Lighted Arms ONLY Note:
See page 3 for correct
arm positions and wiring.
orizontal Arm
Direction
Counterweight
Mounting
Plate Holes
Vertical
Ar
m Directi
on
Hub
Washer 3/8”
1602-162
20 ft Arm
1602-164
1602-172
20 ft LED Arm
Tap
asher
ex Bolt 1/2” x 1”-3/4”
H
Counterweight Mounting Pla
Screw 10-32 x 1/2”
Locking Plate W
Phillips
Hex Bolt 3/8” x 1”
Hardware x 4
DoorKing Part Numbers:
24 ft Arm
1602-174
24 ft LED Arm
Mount hubs on
operator FIRST.
Test hubs UP and
DOWN positions
BEFORE installing
counterweight
mounting plates,
te
then assemble arms,
cables and wire
harness on LED
models.
1602-166
27 ft Arm
1602-176
27 ft LED Arm
Support arms during assembly until all cables
have been installed and adjusted for level.
Test hub UP and DOWN position
before installing arms.
1602-149-E-11-19
Hub
r Pin
a
e
sher
W Sh
r Pin
UHM
e
3/8” Wa
Cott
&
Washer 3/8”
Cotter Pin
Copyright 2019 DoorKing®, Inc. All rights reserved.
1
See
next
page
Counter
Mounting Plate
14 ft cable (See page 3)
Nylon Washer
Hex Head Screw
we
ight
120 S. Glasgow Avenue
Inglewood, California 90301 U.S.A.
Wishbone Hardware Assembly
Adjust ALL cables
with turnbuckles to
make the arms level.
Turnbuckle Eye
Thimble
Eye
Cable
p
am
Cl
Stainless Steel
Cable on 27 ft
models ONLY
Hex Bolt 3/8” x 4” and Washer 3/8”
Washer 3/8”
Lockwasher 3/8”
Hex Nut 3/8”
Bolt and Nu
Turnbuckle
HMW Shear Pin
U
t
3/8” Washer & Cotter Pin
Thimble
Eye
Washer 3/8”
Cotter Pin
Cable
p
am
Cl
Wa
Eye Bolt 3/8” x 4”
Washer 3/8”
Lockwasher 3/8”
Hex Nut 3/8”
Wishbone Stainless Steel Cables
sher 3/8”
Wishbone Steel Cables Note:
These 2 steel cables are used
on ALL arm assemblies.
14 ft Arm
14 ft Arm
Support arms during assembly until all cables
have been installed and adjusted for level.
urnbuckle
T
Thimble
Eye
Cable
Clamp
Hex Nut 3/8
Lockwasher 3/8”
Washer 3/8”
”
Hex Bolt 3/8” x 1”
1602-149-E-11-19
Thimble
Washer 3/8”
Pl
ast
End Ca
i
c
p
Cable
p
am
Cl
Eye
Eye Bolt 3/8” x 4”
Washer 3/8”
Lockwasher 3/8”
Hex Nut 3/8”
el Cable
e
Stainless St
Stainless Steel Cable
End of Arm
The End of Arm Assembly steel cable is ONLY used on the 27 ft arm.
The 20 ft and 24 ft arms DO NOT use this steel cable.
2
Hex Bolts 3/8” x 1”
Lockwashers 3/8”
Hex Nuts 3/8”
Loading...