D-Link DWL-3610AP User Manual
Product Highlights
Next Generation Connectivity
Provides speeds up to 300 Mbps2 for 802.11n or 867
Mbps2 for 802.11ac, allowing high-speed transfers and
extra bandwidth for wireless clients
Power over Ethernet
Support for 802.3af allows the access point to be
installed in locations without access to power outlets,
reducing installation costs and maximising exibility
Versatile Management
Self-conguring cluster mode simplies deployment
of multiple access points, and Radio Frequency
resource management improves signal coverage
DWL-3610AP
Wireless AC Selectable Dual-Band Unied Access Point
Features
Ideal for Business
• Self-conguring cluster feature
• Up to 16 virtual access points may be created
from a single access point
• Flexible QoS with Wi-Fi Multimedia (WMM)
• IEEE 802.3af Power over Ethernet (PoE)
High-Performance Connectivity
• One Gigabit Ethernet LAN port
• Airtime fairness
Trusted Wireless Security Feature
• WPA/WPA2 Personal
• WPA/WPA2 Enterprise
• MAC address ltering
• Rogue AP detection
The DWL-3610AP Wireless AC Selectable Dual-Band Unied Access Point is designed for small
to medium businesses and enterprises, providing unparalleled bandwidth and exibility for
medium to large scale Wi-Fi networks. Featuring the latest 802.11ac technology on its 5 GHz
band, the DWL-3610AP allows you to deploy more devices and provide greater throughput for
your wireless clients.
Centrally Managed
When working in conjunction with D-Link Wireless Controllers and Unied Switches, the
DWL-3610AP can be centrally managed. This allows for a large number of APs to be deployed
and managed easily and eciently. Once the APs are discovered by the controller, the
administrator can push congurations to them as a group, instead of doing so individually.
Additionally, Radio Frequency (RF) resource management allows wireless coverage to be
managed centrally, proving the best coverage possible for wireless clients.
Self-Conguring Cluster
For small businesses that need to deploy multiple APs but lack the resources for complex
network management, the DWL-3610AP self-conguring cluster allows a small number of
DWL-3610AP access points to be set to form a self-conguring cluster. Once the administrator
congures one access point, the same conguration can then be applied to all remaining APs,
making setting up your wireless business network a breeze.
Greater Reach and Flexibility
The internal omnidirectional antenna extends its reach, eliminating dead spots and lling hard-
to-reach places. A selectable radio mode allows the DWL-3610AP to work on either the 2.4 GHz
band or the 5 GHz band, providing speeds of up to 300 Mbps2 for 802.11n, and 867 Mbps2 for
802.11ac. Airtime fairness ensures that equal airtime is given to each client, providing increased
performance even if slower devices are connected.
Automatic RF Management
When access points are deployed in close proximity to each other, there may
be interference between channels if RF management is not implemented.
When a DWL-3610AP senses a neighbour nearby, it will automatically select
a non-interfering channel. This greatly reduces RF interference and will
allow the administrator to deploy APs more densely. To further minimise
interference, when a nearby AP is on the same channel, the DWL-3610AP will
automatically lower its transmission power1. When, for whatever reason, the
nearby AP is no longer present, the DWL-3610AP will increase its transmission
power to expand coverage.
Quality of Service
The DWL-3610AP supports 802.1p Quality of Service (QoS) for enhanced
throughput and better performance of time-sensitive trac like VoIP and
streaming DSCP. The DWL-3610AP supports Wi-Fi Multimedia (WMM), so in
the event of network congestion, time-sensitive trac can be given priority
ahead of other trac. Furthermore, when a number of DWL-3610AP units are
in close proximity to each other, an access point will refuse new association
requests once its resources are fully utilised, allowing the association request
to be picked up by a neighbouring unit, distributing the load over multiple
APs.
DWL-3610AP
Wireless AC1200 Selectable Dual-Band
Unied Access Point
If the worst should happen to your network you need the very best
support and fast. Downtime costs your business money. D-Link
Assist maximises your uptime by solving technical problems
quickly and eectively. Our highly trained technicians are on
standby around the clock, ensuring that award-winning support
is only a phone call away.
With a choice of three aordable service oerings covering all
D-Link business products, you can select the package that suits
you best:
D-Link Assist Gold - for comprehensive 24-hour support
D-Link Assist Gold is perfect for mission-critical environments
where maximum uptime is a high priority. It guarantees four hour
around-the-clock response. Cover applies 24/7 for every day of the
year including holidays.
D-Link Assist Silver - for prompt same-day assistance
D-Link Assist Silver is designed for ‘high availability’ businesses that
require rapid response within regular working hours. It provides a
four hour response service Monday to Friday from 8am to 5pm,
excluding holidays.
D-Link Assist Bronze - for guaranteed response on the
next business day
D-Link Assist Bronze is a highly cost-eective support solution for
less critical environments. Response is guaranteed within eight
business hours Monday to Friday from 8am to 5pm, excluding
holidays.
D-Link Assist can be purchased together with any D-Link business
product. So whether you’re buying switching, wireless, storage,
security or IP Surveillance equipment from D-Link, your peace
of mind is guaranteed. D-Link Assist also oers installation and
conguration services to get your new hardware working quickly
and correctly.
Loading...