Building Networks for People
Wireless Controller
CLI Reference Guide
DWC-2000
Ver. 1.0
Business Wireless Solution
CLI Reference Guide
DWC-2000 Wireless Controller Version 1.0
D-Link.
Copyright © 2014
www.dlink.com
Contents
Contents .......................................................................................................................... 1
1.0 Introduction ............................................................................................................ 6
2.0 Configuration commands under branch WLAN ................................................... 35
2.1 wlan ap_management manual configure <macaddr> ......................................................35
2.2 wlan ap_management ap_database add <macaddr> ......................................................36
2.3 wlan ap_management ap_database edit <macaddr> ......................................................36
2.4 wlan ap_management ap_database delete <macaddr> ...................................................38
2.5 wlan ap_management rf_management configure ............................................................38
2.6 wlan ap_management poll_list configure ................................ .........................................39
2.7 wlan ap_management poll_list delete_ip_address <ipaddr> ............................................39
2.8 wlan ap_management poll_list delete_vlan_list <id> .......................................................39
2.9 wlan ap_management poll_list discovery configure .........................................................40
2.10 wlan ap_management oui_database add ......................................................................40
2.11 wlan ap_management oui_database delete <ouival> ....................................................40
2.12 wlan ap_profile add <profileid> ......................................................................................40
2.13 wlan ap_profile edit <profileid> ......................................................................................41
2.14 wlan ap_profile delete <profileid> ..................................................................................41
2.15 wlan ap_profile copy <sourceprofileid> <destprofileid> ..................................................41
2.16 wlan ap_profile radio configure <profileid> <radio> ........................................................41
2.17 wlan ap_profile QoS configure <profileid> <radio> ........................................................42
2.18 wlan network configure <networkid> ..............................................................................43
2.19 wlan network delete <networkId>...................................................................................46
2.20 wlan ap_profile ssid configure <profileid> <radio> .........................................................46
2.21 wlan ap_profile apply <profileid>....................................................................................46
2.22 wlan captivePortal ssid configure <ssid> .......................................................................46
2.23 wlan client add <macaddr> ............................................................................................47
2.24 wlan client edit <macaddr> ............................................................................................47
2.25 wlan client delete <macaddr> ........................................................................................47
2.26 wlan peer_controller configure .......................................................................................48
2.27 wlan peer_controller push_configuration <ipaddr> .........................................................48
2.28 wlan wids_security ap configure ....................................................................................49
1
2.29 wlan wids_security client configure ................................................................................50
2.30 wlan wlan_global_setting ap_validation configure ..........................................................51
2.31 wlan wlan_global_setting radius_server configure .........................................................51
2.32 wlan wlan_global_setting country configure ...................................................................52
2.33 wlan wlan_global_setting wireless_switch <enable> ......................................................52
3.0 Configuration commands under branch LICENSE ......................................... 52
3.1 license list ........................................................................................................................52
3.2 license activate <activationKey> ......................................................................................52
4.0 Configuration commands under branch SYSTEM ......................................... 52
4.1 system NT-Domain-Settings ............................................................................................52
4.2 system RADIUS_Settings ................................................................................................53
4.3 system LDAP_Settings ................................................................................................ ....53
4.4 system POP3_Settings POP3_Server_Configuration ......................................................54
4.5 system POP3_Settings POP3_Trusted_CA .....................................................................55
4.6 system logging ipv4 configure ..........................................................................................55
4.7 system logging facility configure <facility> .......................................................................56
4.8 system logging remote configure .....................................................................................56
4.9 system logging ipv6 configure ..........................................................................................60
4.10 system Radius-Settings .................................................................................................60
4.11 system remote_management https configure ................................................................62
4.12 system remote_management telnet configure ...............................................................62
4.13 system snmp trap configure <agent_ip> ........................................................................63
4.14 system snmp trap delete <agent_ip> .............................................................................63
4.15 system snmp users configure <user> ............................................................................63
4.16 system snmp sys configure ............................................................................................64
4.17 system snmp access add ..............................................................................................64
4.18 system snmp access edit <rowid> .................................................................................65
4.19 system snmp access delete <rowid> .............................................................................66
4.20 system time configure ....................................................................................................66
4.21 system traffic_meter configure .......................................................................................67
4.22 system usb usb1 configure ............................................................................................67
4.23 system usb usb2 configure ............................................................................................68
4.24 system group add ..........................................................................................................68
4.25 system group edit <row_id> ...........................................................................................69
2
4.26 system group delete <row_id> .......................................................................................69
4.27 system users add ..........................................................................................................69
4.28 system users edit <row_id> ...........................................................................................70
4.29 system users delete <row_id> .......................................................................................70
4.30 system group groupaccesscontrol configure <group_id> ...............................................70
4.31 system group access_control_browser add ...................................................................71
4.32 system group access_control_browser delete <row_id> ................................................71
4.33 system group access_control_ip add .............................................................................71
4.34 system group access_control_ip delete <row_id> ..........................................................72
5.0 Configuration commands under branch UTIL ................................................ 72
5.1 util system_check ping <ip_address> ..............................................................................72
5.2 util system_check dns_lookup <dns> ..............................................................................72
5.3 util system_check traceroute <ip_address> .....................................................................72
5.4 util system_check capturePackets start <interface> ........................................................72
5.5 util system_check capturePackets download <fileName> <ipAddr> .................................73
5.6 util schedule-reboot <enable_reboot> ..............................................................................73
5.7 util usb_test <ipAddr> <fileName> ...................................................................................73
5.8 util backup_configuration <fileName> <ipAddr> ...............................................................73
5.9 util restore_configuration <IpAddr> <FileName> ..............................................................73
5.10 util firmware_upgrade <IpAddr> <FileName> ................................................................73
6.0 Configuration commands under branch QOS ................................................ 73
6.1 qos lan status ..................................................................................................................74
6.2 qos lan enable .................................................................................................................75
6.3 qos lan disable ................................................................................................................76
6.4 qos lan trustmode cos enable <lanPort> ..........................................................................77
6.5 qos lan trustmode dscp enable <lanPort> ........................................................................78
6.6 qos lan cos-map configure <cosValue> <priorityQueue> .................................................79
6.7 qos lan dscp-map configure <dscpValue> <priorityQueue> .............................................80
6.8 qos lan cos-to-dscp-remarking enable .............................................................................82
6.9 qos lan cos-to-dscp-remarking disable ............................................................................83
6.10 qos lan cos-to-dscp-remarking status ............................................................................84
6.11 qos lan cos-to-dscp-remarking configure <cosValue> <dscpValue> ..............................85
6.12 qos lan queue scheduling-algo set <sched-algo> ..........................................................86
7.0 Configuration commands under branch NET ...................................................... 87
3
7.1 net bandwidth profile enable <enable> ............................................................................87
7.2 net bandwidth profile add .................................................................................................87
7.3 net bandwidth profile edit <row_id> .................................................................................88
7.4 net bandwidth profile delete <row_id> .............................................................................88
7.5 net bandwidth traffic_selector add ...................................................................................89
7.6 net bandwidth traffic_selector edit <row_id> ....................................................................89
7.7 net bandwidth traffic_selector delete <row_id> ................................................................90
7.8 net lan dhcp reserved_ip configure <mac_address> ........................................................90
7.9 net lan dhcp reserved_ip delete <mac_address> .............................................................90
7.10 net ethernet configure <interface_name> ......................................................................91
7.11 net lan ipv4 configure.....................................................................................................91
7.12 net lan default_route configure ......................................................................................94
7.13 net lan ipv6 configure.....................................................................................................94
7.14 net lan ipv6 pool configure <ipv6PoolStartAddr> ...........................................................95
7.15 net lan ipv6 pool delete <ipv6PoolStartAddr> ................................................................96
7.16 net mode configure ........................................................................................................96
7.17 net port management configure <portName> ................................................................96
7.18 net radvd configure ........................................................................................................97
7.19 net radvd pool add .........................................................................................................98
7.20 net radvd pool edit <row_id> ..........................................................................................98
7.21 net radvd pool delete <row_id> ......................................................................................99
7.22 net routing dynamic configure ........................................................................................99
7.23 net routing static ipv4 configure <name> ..................................................................... 101
7.24 net routing static ipv6 configure <name> ..................................................................... 102
7.25 net routing static ipv4 delete <name> .......................................................................... 103
7.26 net routing static ipv6 delete <name> .......................................................................... 103
7.27 net captivePortal billing_profile add ............................................................................. 103
7.28 net captivePortal billing_profile edit <row_id> .............................................................. 105
7.29 net captivePortal billing_profile delete <row_id> .......................................................... 108
7.30 net port-vlan edit <portname> ...................................................................................... 108
7.31 net vlan-membership edit <port> ................................................................................. 108
7.32 net multiVlan subnet edit <vlanID> ................................................................ .............. 108
7.33 net vlan config add <vlan_id> ...................................................................................... 110
7.34 net vlan config edit <vlan_Id> ...................................................................................... 110
4
7.35 net vlan config delete <VlanId> .................................................................................... 111
5
1.0 Introduction
1
show
RadiusSettings
Display radius configuration. A RADIUS server
maintains a database of user accounts used in
larger environments. If a RADIUS server already
exists, it can be used for authenticating users that
want to connect to the wireless network provided
by this device. When multiple RADIUS servers
are configured they are accessed in the same
order as in the table. If first RADIUS server is not
accessible, then system tries to contact the next
RADIUS server. Configured Radius Servers This
table displays the list of all configured RADIUS
servers. If the optional argument ServerIP is
specified, detailed configuration of the RADIUS
server is displayed. Server IP: IP address of
RADIUS authentication server Server Port:
RADIUS authentication server port to send the
RADIUS messages. Timeout: The time (in
seconds) the device waits for a response from the
RADIUS server Retries: The number of tries the
router will make to the RADIUS server before
giving up. Secret: RADIUS server secret. This
field is only displayed if the argument ServerIP is
specified.
1
show wlan ap_management
Display the
parameters
related to ap
management.
2
show wlan ap_management channel_plan
Display the
configured
channel plan
parameters.
3
show wlan ap_management power_plan
Display the
configured power
plan parameters.
4
show wlan ap_management oui
Local OUI
Database Entries.
The command “show Radius-Settings ?” at the CLI prompt, gives a
description of all the show commands in the branch Radius-Settings , these
are as follows:
The command “show wlan ?” at the CLI prompt, gives a description of all the
show commands in the branch wlan , these are as follows:
6
5
show wlan ap_management discovery
Display AP and
peer
controllerdiscovery
parameters.
6
show wlan ap_management channel_plan status <radio>
Display the
configured
channel plan
parameters.
7
show wlan ap_management channel_plan history <radio>
Display the
channel plan
history.
8
show wlan ap_management channel_plan
proposed <radio>
Display the
proposed channel
adjustments.
9
show wlan ap_management power_plan status
Display the
configured power
plan parameters.
10
show wlan ap_management power_plan proposed
Display the
proposed power
adjustments.
11
show wlan ap_management oui database
Display Local OUI
Database.
12
show wlan ap_management discovery status
Display Discovery
parameters.
13
show wlan ap_management discovery ip_list
Display IP Poll
discovery list.
14
show wlan ap_management discovery vlan_list
Display VLAN ID
discovery list.
15
show wlan ap_management oui status <ouival>
Display Local OUI
Database for a
ouival.
16
show wlan ap_conf
Display AP
configuration and
status.
17
show wlan ap_conf capability
Display AP
hardware
capability.
18
show wlan ap_conf macaddr
Display AP
configuration and
status for specific
AP.
19
show wlan ap_conf database
Display AP
configuration and
status.
20
show wlan network
Display network
7
configuration
parameters.
21
show wlan ap_conf download
Display AP code
download
configuration and
status.
22
show wlan network status
Display network
configuration
parameters.
23
show wlan network networkid <id>
Display network
configuration
parameters for
specific network.
24
show wlan ap_conf failure_status
Display AP
association and
authentication
failure status.
25
show wlan ap_conf image_availability
Display WS stored
AP image
information.
26
show wlan ap_conf profile
Display AP profile
parameters.
27
show wlan ap_conf provisioning_status
Display AP
Provisioning
parameteres.
28
show wlan ap_conf radio_status
Display Radio
configuration.
29
show wlan ap_conf rf-scan_status
Display WS
managed APs RF
Scan data.
30
show wlan ap_conf status
Display WS
managed AP
status parameters.
31
show wlan ap_conf capability status
Display AP
hardware
capability.
32
show wlan ap_conf capability image_table
Display AP image
capability table.
33
show wlan ap_conf capability
hardware<hw_dwl8600|hw_dwl3600|hw_dwl6600> <radio>
Display AP
hardware
capability for
specific hardware.
34
show wlan ap_conf database status
Display AP
configuration and
status.
8
35
show wlan ap_conf database macaddr <macaddr>
Display AP
configuration and
status for specific
AP.
36
show wlan ap_conf profile status
Display AP profile
parameters.
37
show wlan ap_conf profile radio
Display AP profile
radio parameters.
38
show wlan ap_conf profile radio status <id> <radio>
Display AP profile
radio parameters.
39
show wlan ap_conf profile radio auto_eligible <id> <radio>
Display supported
and enabled
channels for AP
profile radio
parameters.
40
show wlan ap_conf profile radio mcs_indices <id> <radio>
Display supported
MCS indices for
the AP profile
radio.
41
show wlan ap_conf profile radio qos <id> <radio>
Display QoS
parameters for the
AP profile radio.
42
show wlan ap_conf profile radio rates <id> <radio>
Display advertised
and supported
rates for AP
profile.
43
show wlan ap_conf profile radio tspec <id> <radio>
Display TSPEC
parameters for the
AP profile radio.
44
show wlan ap_conf profile radio vap <id> <radio>
Display AP profile
VAP parameters.
45
show wlan ap_conf profile profileid <profileid>
Display AP profile
parameters for
specific profile.
46
show wlan ap_conf macaddr
dist_tunnel_statistics <macaddr>
Display L2
Distributed Tunnel
statistics for AP.
47
show wlan ap_conf macaddr
dist_tunnel_status <macaddr>
Display L2
Distributed Tunnel
status for AP.
48
show wlan ap_conf macaddr failure_status <macaddr>
Display WS
managed AP
failure status
parameters.
49
show wlan ap_conf macaddr
Display AP
9
provisioning_status <macaddr>
Provisioning
status parameters.
50
show wlan ap_conf macaddr radio_status <macaddr>
Display WS
managed AP radio
status parameters.
51
show wlan ap_conf macaddr
rf_scan_rogue_classification<macaddr>
Display the WIDS
AP rogue
classification test
results.
52
show wlan ap_conf macaddr rf_scan_status <macaddr>
Display RF Scan
AP status
parameters.
53
show wlan ap_conf macaddr
rf_scan_triangulation <macaddr>
Display signal
triangulation
status.
54
show wlan ap_conf macaddr statistics <macaddr>
Display WS
managed AP
statistics.
55
show wlan ap_conf macaddr status <macaddr>
Display WS
managed AP
status parameters.
56
show wlan ap_conf macaddr tspec_statistics <macaddr>
Display WS
managed AP
TSPEC statistics.
57
show wlan ap_conf macaddr tspec_status <macaddr>
Display WS
managed AP
TSPEC status.
58
show wlan client
Display AP
associated client
configuration and
status.
59
show wlan known_client
Display the
wireless Known
Client(s).
60
show wlan client adhoc
Display Ad Hoc
network
information.
61
show wlan client detected-client
Display detected
client’s
information.
62
show wlan client rrm
Display Radio
Resource
Measurement
(RRM)
information.
10
63
show wlan client summary
Display associated
client summary
parameters.
64
show wlan client adhoc status
Display WS
detected clients
on an ad-hoc
network.
65
show wlan client rrm status
Show associated
client Radio
Resource
Measurement
status parameters.
66
show wlan client status
Display associated
client status
parameters.
67
show wlan client detected-client preauth-history
Display detected
client pre-auth
history status.
68
show wlan client detected-client roam-history
Display detected
client roam history
status.
69
show wlan client detected-client status
Display detected
client status
parameters.
70
show wlan client macaddr
Show associated
client MAC
address for
specific client.
71
show wlan client macaddr detected_client
Display associated
detected clients
information.
72
show wlan client macaddr adhoc <macaddr>
Display Ad Hoc
network
information.
73
show wlan client macaddr client-qos
Display associated
client QoS
information.
74
show wlan client macaddr client-qos radius <macaddr>
Display associated
client QoS
RADIUS
configuration.
75
show wlan client macaddr client-qos status <macaddr>
Display associated
client QoS status
parameters.
76
show wlan client macaddr detected_client preauth-
Display detected
11
history<macaddr>
client pre-auth
history status.
77
show wlan client macaddr detected_client roamhistory <macaddr>
Display detected
client roam history
status
78
show wlan client macaddr detected_client rogueclassification<macaddr>
Display the WIDS
Client rogue
classification test
results.
79
show wlan client macaddr detected_client
status <macaddr>
Display detected
client status
parameters.
80
show wlan client macaddr detected_client
triangulation <macaddr>
Display detected
client signal
triangulation
status.
81
show wlan client macaddr dist-tunnel <macaddr>
Display associated
client L2
Distributed Tunnel
information.
82
show wlan client macaddr neighbor_ap <macaddr>
Display status
parameters of
neighbor AP seen
by client
83
show wlan client macaddr rrm <macaddr>
Display Radio
Resource
Measurement
(RRM)
information.
84
show wlan client macaddr statistics status <macaddr>
Display WS
managed AP
client statistics.
85
show wlan client macaddr statistics
Display WS
managed AP
client statistics.
86
show wlan client macaddr statistics association <macaddr>
Display client
association
statistics.
87
show wlan client macaddr statistics session <macaddr>
Display session
statistics.
88
show wlan client macaddr status <macaddr>
Display associated
client status
parameters.
89
show wlan client macaddr tspec_statistics <macaddr>
Display WS
managed AP
12
client TSPEC
statistics.
90
show wlan client macaddr tspec_status <macaddr>
Display associated
client TSPEC
status parameters.
91
show wlan peer_switch
Display status for
peer wireless
controllers and
configuration
push.
92
show wlan peer_switch configuration
Display status for
configuration
push.
93
show wlan peer_switch peer_controller
Display status for
peer wireless
controllers.
94
show wlan peer_switch peer_controller status
Display status for
peer wireless
controllers.
95
show wlan peer_switch peer_controller
configuration_status
Display
configuration for
peer controller
configuration push
groups.
96
show wlan peer_switch peer_controller configure_status
Display status for
peer controller
configuration
push.
97
show wlan peer_switch peer_controller ip
Display status for
peer wireless
controller for an
IP.
98
show wlan peer_switch peer_controller ap_status
Display status for
peer controller
managed APs.
99
show wlan peer_switch peer_controller ip status <ipaddr>
Display status for
peer controller .
100
show wlan peer_switch peer_controller ip
ap_status <ipaddr>
Display status for
peer
controllermanaged
APs.
101
show wlan peer_switch peer_controller ip
configure_status <ipaddr>
Display status for
peer controller
configuration
push.
13
102
show wlan peer_switch configuration receive_status
Display status for
configuration
received from a
peer controller.
103
show wlan peer_switch configuration request_status
Display status for
a peer controller
configuration push
request.
104
show wlan wids_security
Display the
wireless WIDS
security settings.
105
show wlan wids_security client
Display the WIDS
Client security
configuration.
106
show wlan wids_security ap
Display the WIDS
AP security
configuration.
107
show wlan wids_security de_authentication
Display the AP deauthentication
attack status.
108
show wlan wids_security rogue_test_descriptions
Display the WIDS
AP rogue
classification test
descriptions.
109
show wlan multicast
Display the valid
multicast transmit
rates.
110
show wlan multicast txrate <radio>
Display the valid
multicast transmit
rates.
111
show wlan rates <radio>
Display the valid
rates.
112
show wlan ssid
Display client
network
association
information.
113
show wlan ssid status <ssid>
Display AP
associated client
configuration and
status.
114
show wlan ssid client_status
Display AP
associated client
configuration and
status.
115
show wlan switch
Display controller
14
status information.
116
show wlan switch ipaddr
Display controller
status information
for an IP address.
117
show wlan switch certificate_request_status
Display the
controller
certificate request
information.
118
show wlan switch client_status
Display controller
to associated
client status
parameters.
119
show wlan switch local
Display Local
wireless controller
status parameters.
120
show wlan switch local client_status
Display AP
associated client
configuration and
status.
121
show wlan switch local statistics
Display wireless
controller
Statistics.
122
show wlan switch local status
Display wireless
controller status
parameters
123
show wlan switch local tspec_statistics
Display wireless
controller TSPEC
statistics
124
show wlan switch local tspec_status
Display wireless
controller TSPEC
status parameters.
125
show wlan switch ipaddr client_status <ipaddr>
Display AP
associated client
configuration and
status.
126
show wlan switch ipaddr statistics <ipaddr>
Display wireless
controller
Statistics.
127
show wlan switch ipaddr status <ipaddr>
Display wireless
controller status
parameters.
128
show wlan switch ipaddr tspec_statistics <ipaddr>
Display wireless
controller TSPEC
statistics.
129
show wlan switch ipaddr tspec_status <ipaddr>
Display wireless
15
controller TSPEC
status parameters.
130
show wlan switch provision_status
Display the
controller
provisioning
information.
131
show wlan rrm
Display radio
resource
measurement
(RRM) controller
data.
132
show wlan rrm channel_load
Display channel
load information.
133
show wlan rrm neighbors
Display neighbor
information.
134
show wlan rrm neighbors status
Display neighbor
information.
135
show wlan rrm neighbors ap_status <macaddr>
Display RRM
information for a
managed AP.
136
show wlan rrm channel_load current_request
Show the current
channel load
request, if any.
137
show wlan rrm channel_load history_status
Display channel
load report history
information.
138
show wlan rrm channel_load history_detail
Display
information for
every known
report.
139
show wlan rrm channel_load request_data
Show data to use
for new channel
load requests.
140
show wlan device_location
Display all device
location
parameters.
141
show wlan device_location status
Display all device
location
parameters.
142
show wlan device_location ap
Display all AP
Triangulation
Location Table
parameteres.
143
show wlan device_location ap macaadr <macaddr>
Display all
Triangulation
16
Location Table
parameters for an
AP.
144
show wlan device_location ap triangulation
Display all
Triangulation
Location Table
parameters.
145
show wlan device_location ap triangulation status_all
Display
Triangulation
Location status
parameters for all
device entries in
the triangulation
table database.
146
show wlan device_location ap triangulation status_located
Display
Triangulation
Location status
parameters for
located device
entries in the
triangulation table
database.
147
show wlan device_location building
Display device
location building
parameters.
148
show wlan device_location building number <1-8>
Enter a valid
Building number.
149
show wlan device_location building status
Display device
location building
parameters.
150
show wlan device_location building floor_ap_status
Display device
location AP
parameters.
151
show wlan device_location building floor_status
Display device
location building
floor parameters.
152
show wlan device_location client
Display all
Triangulation
Location Table
parameters.
153
show wlan device_location client triangulation
Display all
Triangulation
Location Table
parameters.
154
show wlan device_location client triangulation status_all
Display
17
Triangulation
Location status
parameters for all
device entries in
the triangulation
table database.
155
show wlan device_location client triangulation
status_located
Display
Triangulation
Location status
parameters for
located device
entries in the
triangulation table
database.
156
show wlan device_location client macaadr <macaadr>
Display all
Triangulation
Location Table
parameters for
specific MAC
Address.
157
show wlan device_location floor_status
Display Ondemand location
search floor
status.
158
show wlan device_location global_status
Display Ondemand location
search global
status.
159
show wlan device_location floor_status building <building>
Building Number.
160
show wlan device_location floor_status
building_floor <building><floor>
Floor number to
search for the
device.
161
show wlan device_location floor_status all
Display Ondemand location
search floor
status.
The command “show LDAP-Settings ?” at the CLI prompt, gives a
1
show LDAP-Settings
Display LDAP configuration.
description of all the show commands in the branch LDAP-Settings , these are
as follows:
18
The command “show POP3-Settings ?” at the CLI prompt, gives a
1
show POP3-Settings
Display POP3 configuration.
1
show POP3-Trusted-CA
Display POP3 Trusted Certificates.
1
show system logging
Display Logging
Configuration.
2
show system logging remote
.
3
show system logging remote setup
Display remote logging
configuration.
4
show system logging facility
.
5
show system logging facility
setup <facility>
Display logging facility
configuration.
6
show system logging ipv4
.
7
show system logging ipv4 setup
Display logging
configuration.
8
show system logging ipv6
.
9
show system logging ipv6 setup
Display ipv6 logs
configuration.
10
show system
remote_management
Display Remote
management
configuration.
11
show system
remote_management setup
Display remote
management over
https configuration.
12
show system snmp <agentIP>
Display SNMP
configuration.
13
show system status
Display system status.
14
show system dashboard
Displays the resources
being used in the
system currently.
15
show system time
Display TimeZone
Configuration.
description of all the show commands in the branch POP3-Settings , these are
as follows:
The command “show POP3-Trusted-CA ?” at the CLI prompt, gives a
description of all the show commands in the branch POP3-Trusted-CA , these
are as follows:
The command “show system ?” at the CLI prompt, gives a description of all
the show commands in the branch system , these are as follows:
19
16
show system time setup
Display Timezone and
NTP configuration.
17
show system traffic_meter
Display traffic meter
configuration.
18
show system traffic_meter setup
Display traffic meter
configuration.
19
show system usb
Display USB
Configuration.
20
show system users
System group display
mode.
21
show system group
System user display
mode.
22
show system group
specific <row_id>
Display information for
given group.
23
show system group all
Display all groups on
system.
24
show system users all
Display all users on
system.
25
show system users
specific <row_id>
Display information for
given user.
26
show system group
groupaccesscontrol <group_id>
Displays Group Access
Control configuration
for the selected group.
27
show system group
access_control_browser
Displays Access
Control browsers list.
28
show system group
access_control_ip
Displays Access
Control ips list.
29
show system firmwareVersion
Display the firmware
Version.
The command “show pop3-serverCheck ?” at the CLI prompt, gives a
1
show pop3-serverCheck
Display status of Pop3 servers.
1
show Radius-serverCheck
Display status of Radius servers.
description of all the show commands in the branch pop3-serverCheck , these
are as follows:
The command “show Radius-serverCheck ?” at the CLI prompt, gives a
description of all the show commands in the branch Radius-serverCheck ,
these are as follows:
The command “show security ?” at the CLI prompt, gives a description of all
the show commands in the branch security , these are as follows:
20
1
show security
advanced_network
show advanced firewall
attack checks.
2
show security
advanced_network igmp
Display igmp configuration.
The command “show ldap-serverCheck ?” at the CLI prompt, gives a
1
show ldap-serverCheck
Display status of Ldap servers.
1
show net bandwidth
. 2 show net bandwidth profile
.
3
show net bandwidth profile
setup
Show list of Available
Bandwidth Profile(s).
4
show net bandwidth
traffic_selector
.
5
show net bandwidth
traffic_selector setup
Show list of Available
Traffic Selector(s).
6
show net lan dhcp
. 7 show net lan dhcp reserved_ip
.
8
show net lan dhcp reserved_ip
setup
Show list of DHCP
Reserved Addresses.
9
show net lan dhcp
leased_clients
.
10
show net lan dhcp
leased_clients list
Show list of Available
DHCP Leased Clients.
11
show net ethernet
Show Ethernet interfaces.
12
show net lan
.
13
show net lan ipv4
.
14
show net lan ipv4 setup
Show LAN Configuration.
15
show net lan ipv6
.
16
show net lan ipv6 setup
Show LAN Configuration.
17
show net statistics <interface>
Show Interface Statistics.
18
show net mode
.
19
show net mode setup
Display IP MODE
configuration.
20
show net port
.
21
show net port management
.
22
show net port management
Display port management
description of all the show commands in the branch ldap-serverCheck , these
are as follows:
The command “show net ?” at the CLI prompt, gives a description of all the
show commands in the branch net , these are as follows:
21
setup
configuration.
23
show net radvd
.
24
show net radvd setup
Display RADVD
configuration.
25
show net routing dynamic
Show dynamic routing
setup.
26
show net routing dynamic setup
Show dynamic routing
Setup.
27
show net routing
Displays routing setup.
28
show net routing static
.
29
show net routing static ipv4
.
30
show net routing static ipv4
setup
Show all the configured
IPV4 routes.
31
show net routing static ipv6
.
32
show net routing static ipv6
setup
Show all the configured
IPV6 routes.
33
show net captivePortal
34
show net captivePortal
billing_profile <row_id>
35
show net captivePortal
all_billing_profile
36
show net vlan
37
show net vlan configuration
38
show net multivlan
show vlan server status.
39
show net multivlan subnet
show vlan server status.
40
show net multivlan subnet
status
Display vlan server
status.
41
show net port-vlan
show Port vlan status.
42
show net port-vlan status
Display Port vlan status.
The command “wlan ?” at the CLI prompt, gives a description of all the
1
wlan ap_management
AP Management.
2
wlan ap_management manual
Request
administrative
commands/actions
for managed
access points.
3
wlan ap_management ap_database
Enter AP Database
configuration mode.
4
wlan ap_management
rf_management
Configure power
plan and channel
configuration commands in the branch wlan , these are as follows:
22
plan related
parameters.
5
wlan ap_management poll_list
Configure IP
address to
poll,VLAN ID for L2
discovery or
specific discovery
method.
6
wlan ap_management poll_list
discovery
Configure specific
discovery method.
7
wlan ap_management oui_database
Configure Local
OUI Database.
8
wlan ap_management manual
configure <macaddr>
wlan
ap_management
manual
configuration mode.
9
wlan ap_management ap_database
add <macaddr>
wlan apmanagement apdatabase
configuration mode.
10
wlan ap_management ap_database
edit <macaddr>
wlan apmanagement apdatabase
configuration mode.
11
wlan ap_management ap_database
delete <macaddr>
wlan apmanagement apdatabase delete an
mac-address.
12
wlan ap_management
rf_management configure
wlan apmanagement rfmanagement
configuration mode.
13
wlan ap_management poll_list
configure
wlan apmanagement polllist configuration
mode.
14
wlan ap_management poll_list
delete_ip_address <ipaddr>
wlan apmanagement apdatabase
configuration mode.
15
wlan ap_management poll_list
delete_vlan_list <id>
wlan apmanagement polllist delete an vlanid.
16
wlan ap_management poll_list
discovery configure
wlan apmanagement poll-
23
list configuration
mode.
17
wlan ap_management oui_database
add
wlan apmanagement ouidatabase
configuration mode.
18
wlan ap_management oui_database
delete <ouival>
wlan apmanagement apdatabase delete an
oui value.
19
wlan ap_profile
Enter the AP Profile
configuration mode.
20
wlan network
Enter Network
configuration mode.
21
wlan ap_profile QoS
AP Profile QoS
configuration.
22
wlan ap_profile radio
AP Profile Radio
configuration.
23
wlan ap_profile ssid
AP Profile Ssid
configuration.
24
wlan ap_profile add <profileid>
wlan ap_profile
configuration mode.
25
wlan ap_profile edit <profileid>
wlan ap_profile
configuration mode.
26
wlan ap_profile delete <profileid>
Delete a AP Profile.
27
wlan ap_profile
copy <sourceprofileid> <destprofileid>
Copy an existing
AP profile to a new
AP profile.
28
wlan ap_profile radio
configure <profileid> <radio>
wlan ap_profile
radio configuration
mode.
29
wlan ap_profile QoS
configure <profileid> <radio>
wlan ap_profile
QoS configuration
mode.
30
wlan network configure <networkid>
wlan network
configuration mode.
31
wlan network delete <networkId>
Delete a network
Profile.
32
wlan ap_profile ssid
configure <profileid> <radio>
Ssid for AP Profile.
33
wlan ap_profile apply <profileid>
Apply a AP Profile.
34
wlan captivePortal
Captive Portal
Configuration
Changes.
24
35
wlan captivePortal Ssid
SSID configure.
36
wlan captivePortal ssid
configure <ssid>
Configure a SSID
to associate to
captive Portal.
37
wlan captivePortal ssid show
Show the ssid.
38
wlan client
Configure known
client parameters.
39
wlan client add <macaddr>
wlan client
configuration mode.
40
wlan client edit <macaddr>
wlan client
configuration mode.
41
wlan client delete <macaddr>
wlan client
configuration mode.
42
wlan peer_controller
Configure peer
controller
configuration push
groups.
43
wlan peer_controller configure
wlan
peer_controller
configuration mode.
44
wlan peer_controller
push_configuration <ipaddr>
Start the
configuration push
for one peer
controllers.
45
wlan wids_security
Configure the
WIDS security
parameters.
46
wlan wids_security ap
Configure the
WIDS security
parameters for AP.
47
wlan wids_security client
Configure WIDS
Client Security
Parameters.
48
wlan wids_security ap configure
wlan wids_security
ap configuration
mode.
49
wlan wids_security client configure
wlan wids_security
client configuration
mode.
50
wlan wlan_global_setting
Wireless Global
Configuration.
51
wlan wlan_global_setting
ap_validation
Configure the AP
validation method.
52
wlan wlan_global_setting
RADIUS related
25
radius_server
parameters.
53
wlan wlan_global_setting country
country code for
the wireless
network.
54
wlan wlan_global_setting
ap_validation configure
wlan ap_validation
configuration mode.
55
wlan wlan_global_setting
radius_server configure
wlan radius_server
configuration mode.
56
wlan wlan_global_setting country
configure
wlan country
configuration mode.
57
wlan wlan_global_setting
wireless_switch <enable>
Enable/Disable the
wireless controller.
The command “license ?” at the CLI prompt, gives a description of all the
1
license list
List license on the device
2
license
activate <activationKey>
activate a license on the
device.
1
system POP3_Settings
System POP3
configuration
commands.
2
system NT-Domain-Settings
Configure NT-Domain
Settings
4
system LDAP_Settings
Configure LDAP
Settings
5
system POP3_Settings
POP3_Server_Configuration
Configure POP3 Server
6
system POP3_Settings
POP3_Trusted_CA
Upload POP3 trusted
Certificates
7
system logging
.
8
system logging ipv4
System logging
configuration.
9
system logging facility
System log Facility
configuration.
10
system logging remote
System remoteLogging
configuration.
11
system logging ipv6
System ipv6 logs
configuration.
12
system logging ipv4 configure
System logging
configuration commands in the branch license , these are as follows:
The command “system ?” at the CLI prompt, gives a description of all the
configuration commands in the branch system, these are as follows:
26
configuration mode.
13
system logging facility
configure <facility>
System logging facility
configuration mode.
14
system logging remote configure
System remote Logging
configuration mode.
15
system logging ipv6 configure
System ipv6 logs
configuration mode.
16
system Radius-Settings
Configure RadiusSettings.
17
system remote_management
Remote Mgmt Setup.
18
system remote_management
https
Remote Mgmt Setup
for https.
19
system remote_management
https configure
Configure remote
management support
for https.
20
system remote_management
telnet configure
Configure remote
management support
for telnet.
21
system snmp
System SNMP
configuration.
22
system snmp trap
System SNMP trap
configuration.
23
system snmp sys
System SNMP system
configuration.
24
system snmp access
System SNMP Access
Configuration.
25
system snmp users
System SNMP v3 User
Configuration.
26
system snmp trap
configure <agent_ip>
SNMP trap
configuration mode.
27
system snmp trap
delete <agent_ip>
Delete a SNMP trap
configuration.
28
system snmp users
configure <user>
SNMP v3 User list
configuration changes.
29
system snmp sys configure
SNMP system
configuration mode.
30
system snmp access add
SNMP access
configuration mode.
31
system snmp access edit <rowid>
SNMP configuration
mode.
32
system snmp access
delete <rowid>
SNMP access
configuration mode.
33
system time
System time
configuration mode.
27
34
system time configure
System time
configuration mode.
35
system traffic_meter
Traffic meter
Configuration setup.
36
system traffic_meter configure
Traffic meter
configuration mode.
37
system usb
USB Configuration.
38
system usb usb1
USB1 Configuration.
39
system usb usb1 configure
USB1 Configuration.
40
system usb usb2
USB2 Configuration.
41
system usb usb2 configure
USB2 Configuration.
42
system users
System user
configuration
commands.
43
system group
System group
configuration
commands.
44
system group add
System groups add.
mode.
45
system group edit <row_id>
System groups edit
mode.
46
system group delete <row_id>
System groups delete
mode.
47
system users add
System users add
mode.
48
system users edit <row_id>
System users edit
mode.
49
system users delete <row_id>
System users delete
mode.
50
system group groupaccesscontrol
Group access control.
51
system group groupaccesscontrol
configure <group_id>
Group access control
configuration.
52
system group
access_control_browser
List of browsers for
which login policies can
be applied.
53
system group
access_control_browser add
Add a browser to
Access Control
browsers list.
54
system group
access_control_browser
delete <row_id>
Delete a browser from
Access Control
browsers list.
55
system group access_control_ip
List of ips for which
login policies can be
applied.
28
56
system group access_control_ip
add
Add an ip to Access
Control ips list.
57
system group access_control_ip
delete <row_id>
Delete an ip from
Access Control ips list.
The command “util ?” at the CLI prompt, gives a description of all the
1
util restore-factory-defaults
Revert to
factory
default
settings.
2
util system_check
System check
options.
3
util system_check ping <ip_address>
Ping an
Internet
Address.
4
util system_check dns_lookup <dns>
To retrieve
the IP
address of a
Web, FTP,
Mail or any
other Server
on the
Internet.
5
util system_check traceroute <ip_address>
Display all the
routers
present
between the
destination IP
address and
this router.
6
util system_check
display_IPV4_routingtable
Display IPV4
Routing
Table.
7
util system_check capturePackets
Allows you to
capture all
packets that
pass through
the selected
interface.
8
util system_check capturePackets
start <interface>
Start the
packet
capture.
9
util system_check capturePackets
Display
configuration commands in the branch util , these are as follows:
29
avail_interfaces
available
interfaces for
packet
capture.
10
util system_check capturePackets stop
Stop the
packet
capture.
11
util system_check capturePackets
download <fileName> <ipAddr>
Download the
packet
capture to the
host machine.
12
util reboot
Reboot the
system.
13
util schedule-reboot <enable_reboot>
Reboot the
system.
14
util usb_test <ipAddr> <fileName>
To test the
USB.
15
util
backup_configuration <fileName> <ipAddr>
Download the
backup
configuration
file to the host
machine.
16
util
restore_configuration <IpAddr> <FileName>
To restore the
configuraton.
17
util
firmware_upgrade <IpAddr> <FileName>
To upgrade
the firmware.
The command “qos ?” at the CLI prompt, gives a description of all the
1
qos lan
Configure qos
parameters for
lan.
2
qos lan trustmode
Trustmode
configuration in
the controller.
3
qos lan trustmode cos
Configure cos
based QoS on
lan.
4
qos lan trustmode dscp
Configure dscp
based QoS on
lan.
5
qos lan cos-to-dscp-remarking
Enable cos-todscp-remarking.
6
qos lan queue
Queue
configuration commands in the branch qos , these are as follows:
30
scheduling and
management
configuration.
7
qos lan cos-map
Configures the
cos-map for the
controller port.
8
qos lan dscp-map
Configures the
cos-map for the
controller port.
9
qos lan queue management
lan queue
management
configuration.
10
qos lan queue scheduling-algo
lan queue
scheduling
algorithm
configuration.
11
qos lan status
Display status of
lan QoS.
12
qos lan enable
Enable QoS on
LAN.
13
qos lan disable
Disable QoS on
LAN.
14
qos lan trustmode show
Show the
trustmode on
the controller.
15
qos lan trustmode cos enable <lanPort>
Configures CoS
LAN, QoS has
to be enabled
first.
16
qos lan trustmode dscp enable <lanPort>
Configures
DSCP on LAN,
QoS has to be
enabled first.
17
qos lan cos-map
configure <cosValue> <priorityQueue>
Configure cos
map for qos.
18
qos lan cos-map show
Show the cosmap for qos.
19
qos lan dscp-map show
Display dscp
priority mapping
on controller.
20
qos lan dscp-map
configure <dscpValue> <priorityQueue>
Configure
DSCP map for
qos.
21
qos lan cos-to-dscp-remarking enable
Enables cos-todscp remarking.
31
22
qos lan cos-to-dscp-remarking disable
Disables cos-todscp remarking.
23
qos lan cos-to-dscp-remarking status
Display status of
cos-to-dscpremarking.
24
qos lan cos-to-dscp-remarking
configure <cosValue> <dscpValue>
Configures costo-dscp
remarking.
25
qos lan queue management show
Queue
management
configuration
show.
26
qos lan queue scheduling-algo
set <sched-algo>
Set the queue
scheduling
algorithm on the
LAN.
27
qos lan queue scheduling-algo show
Show the queue
scheduling
algorithm on the
LAN.
The command “net ?” at the CLI prompt, gives a description of all the
1
net bandwidth
.
2
net bandwidth profile
It gives options to
add/edit/delete a
bandwidth profile.
3
net bandwidth profile
enable <enable>
It allows you to
enable/disable
bandwidth profiles.
4
net bandwidth profile add
It allows you to add a
bandwidth profile.
5
net bandwidth profile
edit <row_id>
It allows you to edit a
bandwidth profile.
6
net bandwidth profile
delete <row_id>
It allows to you delete a
bandwidth profile.
7
net bandwidth traffic_selector
It gives you options to
add/edit/delete a traffic
selector for a bandwidth
profile.
8
net bandwidth traffic_selector add
It allows you to add a
traffic selector for a
bandwidth profile.
9
net bandwidth traffic_selector
It allows you to edit a
configuration commands in the branch net , these are as follows:
32
edit <row_id>
traffic selector for a
bandwidth profile.
10
net bandwidth traffic_selector
delete <row_id>
It allows you to delete a
traffic selector for a
bandwidth profile.
11
net lan dhcp
DHCP setup.
12
net lan dhcp reserved_ip
DHCP Reserved IPs
setup.
13
net lan dhcp reserved_ip
configure <mac_address>
DHCP Reserved IPs
add/edit mode.
14
net lan dhcp reserved_ip
delete <mac_address>
Delete a specific
reserved ip entry.
15
net ethernet
Ethernet configuration.
16
net ethernet
configure <interface_name>
Ethernet configuration
mode.
17
net lan
LAN setup.
18
net lan default_route
Default Route for
LAN/VLAN configuration
page.
19
net lan ipv4
.
20
net lan ipv4 configure
IPv4 LAN configuration
mode.
21
net lan default_route configure
Default Route on
LAN/VLAN configuration
mode.
22
net lan ipv6
.
23
net lan ipv6 configure
IPv6 LAN configuration
mode.
24
net lan ipv6 pool
.
25
net lan ipv6 pool
configure <ipv6PoolStartAddr>
IPv6 LAN configuration
add/edit mode.
26
net lan ipv6 pool
delete <ipv6PoolStartAddr>
IPv6 LAN configuration
delete.
27
net mode
IP Mode Setup
28
net mode configure
IP Mode configuration
mode.
29
net port
.
30
net port management
Port management
configuration setup.
31
net port management
configure <portName>
Port management
configuration mode.
32
net radvd
RADVD configuration
setup.
33
33
net radvd pool
RADVD configuration
setup.
34
net radvd configure
RADVD configuration
mode.
35
net radvd pool add
RADVD Pool
configuration mode.
36
net radvd pool edit <row_id>
RADVD Pool
configuration mode.
37
net radvd pool delete <row_id>
RADVD pool
configuration mode.
38
net routing dynamic
Configure the routes
dynamically.
39
net routing dynamic configure
Configure the routes
dynamically.
40
net routing
Configure routing mode,
static and dynamic
route(s).
41
net routing static
Configure the routes.
42
net routing static ipv4
Configure the routes.
43
net routing static ipv6
Configure the IPV6
routes.
44
net routing static ipv4
configure <name>
Add new static routes.
45
net routing static ipv6
configure <name>
Add new IPV6 static
routes.
46
net routing static ipv4
delete <name>
Delete a specific route.
47
net routing static ipv6
delete <name>
Delete a specific IPV6
route.
48
net routing static ipv4 deleteAll
Delete all the configured
routes.
49
net routing static ipv6 deleteAll
Delete all the configured
IPV6 routes.
50
net captivePortal
Captive Portal
Configuration Changes.
51
net captivePortal billing_profile
Billing Profile.
52
net captivePortal billing_profile
add
Add a billing profile.
53
net captivePortal billing_profile
edit <row_id>
Edit a billing profile.
54
net captivePortal billing_profile
delete <row_id>
Delete a Billing Profile.
55
net port-vlan
Port vlan.
34
56
net port-vlan edit <portname>
vlan port name range 14 .
57
net vlan-membership
vlan-membership.
58
net vlan-membership edit <port>
Net vlan membership
for the port.
59
net multivlan
Multivlan server
configure.
60
net multivlan subnet
Multivlan Server
configure.
61
net multiVlan subnet
edit <vlanID>
Multivlan server edit
mode.
62
net vlan
vlan Configuration
Changes.
63
net vlan config
vlan configuration .
64
net vlan config add <vlan_id>
Add a vlan.
65
net vlan config edit <vlan_Id>
Edit a configured vlan.
66
net vlan config delete <VlanId>
Delete a vlan.
67
net vlan config enable
Enable vlan.
configuration.
68
net vlan config disable
Disable vlan
configuration.
2.0 Configuration commands under branch WLAN
S.No
Command Name
Description
Type and Description
1
<macaddr>
wlan ap_management
manual configuration mode.
MAC address
AA:BB:CC:DD:EE:FF where each
part is in the range 00-FF
2
save
Save ap management
configuration changes.
3 cancel
Roll back ap management
configuration changes.
4
exit
Save ap management
configuration changes and
current mode.
5
radio
Configure radio on a
managed access points.
Wireless radio interface
6
channel
Configure managed access
points channel value.
Unsigned integer
7
power
Enter the transmit power.
Range of power percentage
2.1 wlan ap_management manual configure <macaddr>
35
8
debug
Enable/Disable debugging
on Managed AP.
9
debug passwd
Enter the admin password
for the AP (the default is
admin.
String
10
debug
passwd_confirm
Enter the admin password
again.
String
11
debug
enable_debug
Enable/Disable debugging
on Managed AP.
Boolean choice
12
reset
Reset a WS managed AP.
Boolean choice
2.2 wlan ap_management ap_database add <macaddr>
S.No
Command Name
Description
Type and Description
1
<macaddr>
wlan ap-management apdatabase configuration
mode.
MAC address AA:BB:CC:DD:EE:FF
where each part is in the range 00FF
2
save
Save ap-database
configuration changes.
3
cancel
Roll back ap-database
configuration changes.
4
exit
Save ap-database
configuration changes and
current mode.
5
mode
Configure the AP Managed
mode.
AP mode
6
location
Configure the AP location
description.
String
7
password
Configure the AP
Authentication Password.
String
8
profileid <1-16>
Set the AP Profile ID to use
for configuration.
AP Profile ID
9
ssid
Configure the stand-alone
AP expected SSID.
String
10
channel
Configure the stand-alone
AP expected channel.
Unsigned integer
11
wds_mode
Configure the stand-alone
AP expected WDS mode.
Stand-alone AP expected WDS
mode
12
security_mode
Configure the stand-alone
AP expected security
mode.
Stand Alone AP Security mode
13
wired-mode
Configure the stand-alone
36
AP expected wired network
mode.
Stand-alone AP expected wired
network mode
14
radio1-802.11a/n
Configure fixed radio
channel/power settings.
15
radio2-
802.11b/g/n
Configure fixed radio
channel/power settings.
16
radio1-802.11a/n
channel
Configure a fixed channel
for the radio.
Unsigned integer
17
radio1-802.11a/n
power
Configure a fixed transmit
power for the radio.
Range of power percentage
18
radio2-
802.11b/g/n
channel
Configure a fixed channel
for the radio.
Unsigned integer
19
radio2-
802.11b/g/n
power
Configure a fixed transmit
power for the radio.
Range of power percentage
2.3 wlan ap_management ap_database edit <macaddr>
S.No
Command Name
Description
Type and Description
1
<macaddr>
wlan ap-management apdatabase configuration
mode.
MAC address AA:BB:CC:DD:EE:FF
where each part is in the range 00FF
2
save
Save ap-database
configuration changes.
3
cancel
Roll back ap-database
configuration changes.
4
exit
Save ap-database
configuration changes and
current mode.
5
mode
Configure the AP Managed
mode
AP mode
6
location
Configure the AP location
description.
String
7
password
Configure the AP
Authentication Password.
String
8
profileid <1-16>
Set the AP Profile ID to use
for configuration.
AP Profile ID
9
ssid
Configure the stand-alone
AP expected SSID.
String
10
channel
Configure the stand-alone
AP expected channel.
Unsigned integer
11
wds_mode
Configure the stand-alone
AP expected WDS mode.
Stand-alone AP expected WDS
37
mode
12
security_mode
Configure the stand-alone
AP expected security
mode.
Stand Alone AP Security Mode
13
wired-mode
Configure the stand-alone
AP expected wired network
mode.
Stand-alone AP expected wired
network mode
14
radio1-802.11a/n
Configure fixed radio
channel/power settings.
15
radio2-
802.11b/g/n
Configure fixed radio
channel/power settings.
16
radio1-802.11a/n
channel
Configure a fixed channel
for the radio.
Unsigned integer
17
radio1-802.11a/n
power
Configure a fixed transmit
power for the radio.
Range of power percentage
18
radio2-
802.11b/g/n
channel
Configure a fixed channel
for the radio.
Unsigned integer
19
radio2-
802.11b/g/n
power
Configure a fixed transmit
power for the radio.
range of power percentage
2.4 wlan ap_management ap_database delete <macaddr>
S.No
Command
Name
Description
Type and Description
1
<macaddr>
wlan ap-management apdatabase delete an macaddress
MAC address AA:BB:CC:DD:EE:FF
where each part is in the range 00-FF
S.No
Command Name
Description
Type and
Description
1
save
Save rf management configuration
changes.
2
cancel
Roll back configuration changes.
3
exit
Save rf management configuration
changes and current mode.
4
channel_plan
Configure the channel plan parameters.
5 power_plan
Configure the power plan parameters.
6
channel_plan plan
Specify radio frequency band.
Radio frequency
Band
7
channel_plan mode
Set the mode of channel plan
assignment.
Channel Plan
Mode
2.5 wlan ap_management rf_management configure
38
8
channel_plan
history_depth <0-10>
Configure the number of the channel
algorithm iterations that WS
remembers.
Unsigned
integer
9
channel_plan
interval <6-24>
Configure the interval for applying and
computing channel adjustments.
Unsigned
integer
10
channel_plan time
Configure the scheduled time for
applying and computing channel
adjustments.
String
11
power_plan interval <15-
1440>
Configure the interval for applying and
computing channel adjustments.
Unsigned
integer
12
power_plan mode
Set the mode of power plan
assignment.
Mode of Power
Plan
2.6 wlan ap_management poll_list configure
S.No
Command
Name
Description
Type and Description
1
save
Save poll list configuration
changes.
2 cancel
Roll back poll list
configuration changes.
3
exit
Save poll list configuration
changes and current mode.
4 vlan
Configure a VLAN ID for L2
discovery.
vlan id possible values
5
ip_address
Configure IP address to poll.
IP address AAA.BBB.CCC.DDD where
each part is in the range 0-255
S.No
Command
Name
Description
Type and Description
1
<ipaddr>
wlan ap-management apdatabase configuration
mode.
IP address AAA.BBB.CCC.DDD where
each part is in the range 0-255
S.No
Command
Name
Description
Type and
Description
1
<id>
wlan ap-management poll-list delete an
vlanid.
Unsigned integer
2.7 wlan ap_management poll_list delete_ip_address <ipaddr>
2.8 wlan ap_management poll_list delete_vlan_list <id>
39
2.9 wlan ap_management poll_list discovery configure
S.No
Command Name
Description
Type and
Description
1
save
Save poll-list discovery configuration
changes.
2 cancel
Roll back poll-list discovery configuration
changes.
3
exit
Save poll-list discovery configuration
changes and current mode.
4
discovery
Enable/Disable specific discovery method.
5
discovery
enable_L2/VLAN
Enable/Disable the discovery of APs and
peer controllers using L2 multicast frames.
Boolean choice
6
discovery
enable_L3/IP
Enable/Disable the discovery of APs and
peer controllers using IP polling method.
Boolean choice
S.No
Command
Name
Description
Type and
Description
1
save
Save oui database configuration changes.
2
cancel
Roll back oui database configuration
changes.
3 exit
Save discovery oui database changes and
current mode.
4
value
Configure Local OUI Database.
String
5
description
Configure Local OUI Database.
String
S.No
Command
Name
Description
Type and
Description
1
<ouival>
wlan ap-management ap-database delete an
oui value.
String
S.No
Command
Name
Description
Type and
Description
1
<profileid>
wlan ap_profile configuration mode.
AP Profile ID
2
save
Save AP Profile settings.
3
exit
Save AP Profile settings and exit current
mode.
4
cancel
Roll back AP Profile settings changes.
5 profile_name
Configure a name for the AP Profile.
2.10 wlan ap_management oui_database add
2.11 wlan ap_management oui_database delete <ouival>
2.12 wlan ap_profile add <profileid>
40
String
6
hardware_type
Configure hardware type.
AP Hardware Types
7
vlanid
Configure the wired network detection vlan
id.
vlan id possible
values
2.13 wlan ap_profile edit <profileid>
S.No
Command
Name
Description
Type and
Description
1
<profileid>
wlan ap_profile configuration mode.
AP Profile ID
2
save
Save AP Profile settings.
3
exit
Save AP Profile settings and exit current
mode.
4
cancel
Roll back AP Profile settings changes.
5
profile_name
Configure a name for the AP Profile.
String
6
hardware_type
Configure hardware type.
AP Hardware Types
7
vlanid
Configure the wired network detection vlan
id.
vlan id possible
values
S.No
Command Name
Description
Type and Description
1
<profileid>
Delete a AP Profile.
AP Profile ID
S.No
Command Name
Description
Type and
Description
1
<sourceprofileid> <destprofileid>
Copy an existing AP profile to
a new AP profile.
AP Profile ID
AP Profile ID
S.No
Command Name
Description
Type and
Description
1
<profileid> <radio>
wlan ap_profile radio configuration
mode.
AP Profile ID
wireless radio
interface
2
save
Save AP profile radio settings.
3 exit
Save AP profile radio settings and exit
2.14 wlan ap_profile delete <profileid>
2.15 wlan ap_profile copy <sourceprofileid> <destprofileid>
2.16 wlan ap_profile radio configure <profileid> <radio>
41
current mode.
4
cancel
Roll back AP profile radio settings
changes.
5
mode
Configure the physical mode for the
radio interface.
6
enable
Enable/Disable the radio operational
mode.
Boolean choice
7
state_isolation
Enable/Disable Station Isolation.
Boolean choice
8
rts_threshold
Configure the RTS threshold.
Unsigned integer
9
enable_load_balancing
Enable load balancing parameters for
the radio.
Boolean choice
10
load_utilization
Configure the percentage utilization.
Range of power
percentage
11
maximum_clients
Configure the maximum number of
simultaneous client associations
allowed.
Unsigned integer
12
rf_scan_otherchannels
Enable/Disable scan of other channels.
Boolean choice
13
rf_scan_sentry
Set the scan mode to sentry.
Boolean choice
14
dtm_period
Configure the DTIM period.
Unsigned integer
15
beacon_interval
Configure the beacon interval.
Unsigned integer
16
automatic_channel
Enable/Disable the Automatic Power
Save Delivery mode for the radio.
Boolean choice
17
automatic_power
Enable/Disable auto power adjustment.
Boolean choice
18
initial_power
Configure a default power setting for
the radio.
Range of power
percentage
19
rate
Configure data rates for the radio.
20
rate basic
Configure basic client rates.
Unsigned integer
21
rate supported
Configure supported client rates.
Unsigned integer
22
channel_auto_eligble
Enable/Disable channel auto-eligibility
for client connections.
Unsigned integer
2.17 wlan ap_profile QoS configure <profileid> <radio>
S.No
Command Name
Description
Type and
42
Description
1
<profileid> <radio>
wlan ap_profile QoS configuration mode
AP Profile ID
wireless radio
interface
2
save
Save AP profile QoS configuration.
3 exit
Save and exit current mode.
4
cancel
Roll back AP Profile QoS settings
changes.
5
enable_wmm_mode
Enable/Disable WMM mode.
Boolean choice
6
edca
Select between AP EDCA parameters
or Station EDCA parameters to
Configure.
AP EDCA
parameters or
Station EDCA
parameters
7
edca_queue
Select which EDCA queue to
configure(background, best-effort,
video, voice)
EDCA Parameters
8
aifs
Configure the Arbitration Inter-frame
Spacing time.
Unsigned integer
9
cwmin
Configure the upper limit of the range
from which the initial random backoff
wait time is determined.
Unsigned integer
10
cwmax
Configure the upper limit for the
doubling of the random backoff value.
Unsigned integer
11
max_burst
Configure the maximum burst duration.
Unsigned integer
2.18 wlan network configure <networkid>
S.No
Command Name
Description
Type and
Description
1
<networkid>
wlan network configuration
mode.
WLAN Network ID
2
save
Save Network settings.
3
exit
Save Network settings and exit
current mode.
4
cancel
Roll back Network settings
changes.
5 ssid
Configure the SSID for the
network.
String
6
hide_ssid
Enable/Disable hiding the SSID
for the network.
Boolean choice
7
ignore_broadcast
Enable/Disable deny broadcast
43
mode for the network.
Boolean choice
8
security-mode
Configure security mode for
network.
802.11 Security
Types
9
wpa2
Configure WPA2.
10
wpa2 key-caching
wpa2 options for network.
11
wpa2 key-caching holdtime
wpa2 key holdtime for network.
WPA2 key caching
hold-time [0-Default
value]
12
wpa2 pre-auth
wpa2 pre-authentication for
network.
13
wpa2 pre-auth set
wpa type for network.
WPA2 preauthentication
14
wpa2 pre-auth limit
wpa2 pre-authentication limit for
network.
WPA2 preauthentication limit
[0-Default value]
15
dot1x
wpa2 refresh rate for network.
16
dot1x bcast-key-refresh-rate
wpa2 refresh rate for network.
WPA2 broadcast
key refresh rate [0Default value]
17
dot1x session-key-refreshrate
wpa2 session key refresh rate
for network.
WPA2 session key
refresh rate [0 Disable]
18
wpa
Configure WPA.
19
wpa cipher
wpa type for network.
WPA Cipher Types
20
wpa key
wpa type for network
21
wpa key value
wpa type for network.
String
22
wpa key enc-value
wpa type for network.
String
23
wpa version
wpa type for network.
WPA version Types
24
wep
Configure WEP.
25
wep auth
wep type authentication for
network.
Static WEP Type
26
wep key
Configure WEP key related
parameters.
27
wep key index
Configure WEP key related
44
parameters.
28
wep key index tx
Configure WEP key related
parameters.
WEP key index type
(1-4)
29
wep key index value
Configure WEP key related
parameters.
String
30
wep key index enc
Configure WEP key related
parameters.
String
31
wep key type
Configure WEP key related
parameters.
Static WEP Type
32
wep key length
Configure WEP key related
parameters.
WEP key length
33
wep tx-key
Configure the WEP transfer key
index.
WEP key index type
(1-4)
34
vlan
Configure the default VLAN ID.
Unsigned integer
35
mac_authentication
Configure client MAC
authentication parameters.
Wireless network
mac authentication
type
36
redirect_mode
Configure the redirect mode for
the network.
Network redirect
mode
37
redirect_url
Configure the HTTP redirect
URL for the network.
String
38
arp_suppression
Enable/Disable Wireless ARP
Suppression for the network.
Boolean choice
39
dist_tunnel
Enable/Disable distributed
tunneling mode for the network.
Boolean choice
40
radius_parm
Configure RADIUS related
parameters.
41
radius_parm accounting
Enable/Disable RADIUS
accounting function.
Boolean choice
42
radius_parm server_name
Configure
Authentication/Accounting
RADIUS Server Name.
43
radius_parm server_name
auth
Configure Authentication
RADIUS Server Name.
String
44
radius_parm server_name
acct
Configure Accounting RADIUS
Server Name.
String
45
radius_parm
use_network_configuration
Enable/Disable override of
Network RADIUS configuration.
Boolean choice
45
2.19 wlan network delete <networkId>
S.No
Command Name
Description
Type and Description
1
<networkId>
Delete a network Profile
WLAN Network ID
S.No
Command Name
Description
Type and
Description
1
<profileid> <radio>
Ssid for AP Profile.
AP Profile ID
wireless radio
interface
2
save
Save AP profile ssid settings.
3
exit
Save AP profile ssid settings and exit
current mode.
4
cancel
Roll back AP profile ssid settings changes.
5
vap
Configure the SSID for the network.
WLAN VAP ID
6
enable
Enable/Disable the VAP operational
mode.
Boolean choice
7
networkid
Configure the SSID for the network.
WLAN Network ID
S.No
Command Name
Description
Type and Description
1
<profileid>
Apply a AP Profile.
AP Profile ID
S.No
Command Name
Description
Type and Description
1
<ssid>
Configure a SSID to associate to
captive Portal.
String
2
save
Save captive portal SSID
configuration changes.
3 exit
Save captive portal SSID changes
and exit current mode.
4
cancel
Roll back configuration changes.
5
showCP-profiles
Available captive portal profiles.
6
accessType
Access Type for the SSID to be
configure.
Captive Portal Type for
SSID
7
permanent-user
Access Type is Permanent User.
8
permanent-user
auth-mode
Authentication-server for user.
Authentication Type for
Captive Portal user
2.20 wlan ap_profile ssid configure <profileid> <radio>
2.21 wlan ap_profile apply <profileid>
2.22 wlan captivePortal ssid configure <ssid>
46
9
permanent-user
auth-type
Authentication-type for user.
Radius Authentication type
10
permanent-user
CP-profile
Captive portal profile for user.
Captive Portal Profile ID
11
temporary-user
Access Type is Temporary User.
12
temporary-user
CP-profile
Captive portal profile for user.
Captive Portal Profile ID
2.23 wlan client add <macaddr>
S.No
Command
Name
Description
Type and Description
1
<macaddr>
wlan client configuration
mode.
MAC address AA:BB:CC:DD:EE:FF
where each part is in the range 00-FF
2
save
Save client configuration
changes.
3
cancel
Roll back client
configuration changes.
4
exit
Save client configuration
changes and current mode.
5 name
Configure a Known Client
name.
String
6
action
Configure a Known Client
authentication action.
Known Client Authentication Action
S.No
Command
Name
Description
Type and Description
1
<macaddr>
wlan client configuration
mode.
MAC address AA:BB:CC:DD:EE:FF
where each part is in the range 00-FF
2
save
Save client configuration
changes.
3 cancel
Roll back client
configuration changes.
4
exit
Save client configuration
changes and current mode.
5
name
Configure a Known Client
name.
String
6
action
Configure a Known Client
authentication action.
Known Client Authentication Action
S.No
Command
Name
Description
Type and Description
2.24 wlan client edit <macaddr>
2.25 wlan client delete <macaddr>
47
1
<macaddr>
wlan client
configuration mode.
MAC address AA:BB:CC:DD:EE:FF where
each part is in the range 00-FF
2.26 wlan peer_controller configure
S.No
Command Name
Description
Type and
Description
1
save
Save peer controller configuration
changes.
2
cancel
Roll back peer controller configuration
changes.
3 exit
Save peer controller configuration
changes and current mode.
4
enable_global
Enable/Disable global configuration push
to peer controllers.
Boolean choice
5
enable_discovery
Enable/Disable discovery configuration
push to peer controllers.
Boolean choice
6
enable_channel/power
Enable/Disable channel and power
configuration push to peer controllers.
Boolean choice
7
enable_ap_database
Enable/Disable AP database
configuration push to peer controllers.
Boolean choice
8
enable_device_location
Enable/Disable device location
configuration push to peer controllers.
Boolean choice
9
enable_ap_profile
Enable/Disable AP profile and network
configuration push to peer controllers.
Boolean choice
10
enable_known_client
Enable/Disable known client
configuration push to peer controllers.
Boolean choice
11
enable_captive_portal
Enable/Disable Captive Portal
configuration push to peer controllers.
Boolean choice
12
enable_radius_client
Enable/Disable RADIUS client
configuration push to peer controllers.
Boolean choice
13
enable_QoS_acl
Enable/Disable QoS ACL configuration
push to peer controllers.
Boolean choice
14
enable_QoS_diffserv
Enable/Disable QoS DiffServ
configuration push to peer controllers.
Boolean choice
15
enable_wds_group
Enable/Disable wds group configuration
push to peer controllers.
Boolean choice
S.No
Command
Name
Description
Type and Description
1
<ipaddr>
Start the configuration push
for one peer controllers.
IP address AAA.BBB.CCC.DDD where
each part is in the range 0-255
2.27 wlan peer_controller push_configuration <ipaddr>
48
2.28 wlan wids_security ap configure
S.No
Command Name
Description
Type and
Description
1
save
Save Wids Security settings.
2
exit
Save Configurable wids security
settings and exit current mode.
3
cancel
Roll back Configurable wids security
settings changes.
4
admin_config_rogue
Enable Rogue reporting for admin
configured Rogue AP's.
Boolean
choice
5
ap_chan_illegal
Enable or disable Rogue reporting for
AP's is operating on an illegal
channel.
Boolean
choice
6
ap_de_auth_attack
Enable or disable the AP deauthentication attack.
Boolean
choice
7
fakeman_ap_chan_invalid
Enable or disable Rogue reporting for
fake managed AP's detected with an
invalid channel.
Boolean
choice
8
fakeman_ap_managed_ssid
Enable or disable Rogue reporting for
fake managed AP's detected with a
managed SSID.
Boolean
choice
9
fakeman_ap_no_ssid
Enable or disable Rogue reporting for
APs detected with no SSID.
Boolean
choice
10
managed_ap_ssid_invalid
Enable or disable Rogue reporting for
managed AP's detected with an
invalid SSID.
Boolean
choice
11
managed_ssid_secu_bad
Enable or disable Rogue reporting for
AP's detected with managed SSID's
and an invalid security configuration.
Boolean
choice
12
standalone_cfg_invalid
Enable or disable Rogue reporting for
standalone AP's operating with
unexpected configuration.
Boolean
choice
13
unknown_ap_managed_ssid
Enable or disable Rogue reporting for
unknown AP's detected with a
managed SSID.
Boolean
choice
14
unmanaged_ap_wired
Enable or disable Rogue reporting for
unmanaged AP's on a wired network
Boolean
choice
15
rogue_det_trap_interval
Configure the Rogue detected trap
interval.
Unsigned
integer
16
wired_detection_interval
Configure the wired network detection
49
interval.
Unsigned
integer
17
wds_device_unexpected
Enable or disable Rogue reporting for
detection of unexpected WDS
devices.
Boolean
choice
2.29 wlan wids_security client configure
S.No
Command Name
Description
Type and
Description
1
save
Save wids client settings.
2
exit
Save wids client settings and exit
current mode.
3
cancel
Roll back wids client settings
changes.
4
auth_with_unknown_ap
Enable or Disable the Known
Client is authenticated with
unknown AP test.
Boolean choice
5
configured_auth_rate
Enable or Disable the configured
rate of 802.11 Auth Requests
test.
Boolean choice
6
configured_deauth_rate
Enable or Disable the configured
rate of 802.11 Deauth Requests
test.
Boolean choice
7
configured_probe_rate
Enable or Disable the configured
rate of 802.11 Probe Requests
test.
Boolean choice
8
known_client_database
Enable or Disable the client
present in Known DB Test
Boolean choice
9
max_auth_failure
Enable or Disable the Maximum
number of Authentication
Failures test.
Boolean choice
10
oui_database
Enable or Disable the client
present in OUI DB Test.
Boolean choice
11
threat_mitigation
Enable or Disable Client Threat
Mitigation.
Boolean choice
12
known_db_location
Configure the Known Client
database location.
wireless ap
validation type
13
known_db_radius_server_name
Configure the Known Client
database server name.
String
14
rogue_det_trap_interval
Set the Rogue Detection Trap
Interval.
Unsigned
integer
15
threshold_interval_deauth
Configure the De-Authentication
Requests Threshold Interval.
Unsigned
50
integer
16
threshold_value_deauth
Configure the De-Authentication
Requests Threshold Value.
Unsigned
integer
17
threshold_value_auth
Configure the Authentication
Requests Threshold Value.
Unsigned
integer
18
threshold_interval_probe
Configure the Probe Requests
Threshold Value.
Unsigned
integer
19
threshold_value_probe
Configure the Probe Requests
Threshold Value.
Unsigned
integer
20
threshold_auth_failure
Configure the Authentication
Failures Threshold Value.
Unsigned
integer
2.30 wlan wlan_global_setting ap_validation configure
S.No
Command
Name
Description
Type and
Description
1
save
Save ap validation configuration changes.
2 cancel
Roll back ap validation configuration changes.
3
exit
Save ap validation configuration changes and
current mode.
4
validation
Use local AP database or configured RADIUS
server to validate discovered APs.
wireless ap
validation type
5
authentication
Enable/Disable AP authentication mode.
Boolean choice
S.No
Command Name
Description
Type and
Description
1
save
Save radius server configuration
changes.
2
cancel
Roll back radius server
configuration changes.
3 exit
Save radius server configuration
changes and current mode.
4
authentication_server_name
Configure Authentication RADIUS
Server Name.
String
5
accounting_server_name
Configure Accounting RADIUS
Server Name.
String
6
accounting_enable
Enable/Disable RADIUS accounting
function.
Boolean choice
2.31 wlan wlan_global_setting radius_server configure
51
2.32 wlan wlan_global_setting country configure
S.No
Command
Name
Description
Type and
Description
1
save
Save country configuration changes.
2 cancel
Roll back country configuration changes.
3
exit
Save country configuration changes and
current mode.
4
country
Enter a country code.
Country Code
S.No
Command Name
Description
Type and Description
1
<enable>
Enable/Disable the wireless controller.
Boolean choice
S.No
Command Name
Description
Type and Description
1
list
List all licenses configured on the device.
2 activate
Activate a license on the device.
S.No
Command
Name
Description
Type and Description
1
<activationKey>
Activate a license on the
device.
Invalid Activation Key, please enter
key with length of 25 characters.
2
list
List all licenses
configured on the device.
3
activate
Activate a license on the
device.
S.No
Command Name
Description
Type and Description
1
save
Save NT Domain
configuration changes.
2
exit
Save NT Domain
configuration changes
and exit.
3
cancel
Roll back configuration
changes.
2.33 wlan wlan_global_setting wireless_controller <enable>
3.0 Configuration commands under branch LICENSE
3.1 license list
3.2 license activate <activationKey>
4.0 Configuration commands under branch SYSTEM
4.1 system NT-Domain-Settings
52
4
Authentication_Server_1
Set primary server IP
address.
IP address AAA.BBB.CCC.DDD
where each part is in the range 0255
5
Authentication_Server_2
Set second alternative
server IP address.
IP address AAA.BBB.CCC.DDD
where each part is in the range 0255
6
Authentication_Server_3
Set third alternative
server IP address.
IP address AAA.BBB.CCC.DDD
where each part is in the range 0255
7
workgroup
Set NT Domain
Workgroup.
String
8
second_workgroup
Set second alternative
Workgroup.
String
9
third_workgroup
Set Third alternative
Workgroup.
String
10
timeout
Set NT Domain server
connection timeout.
Unsigned integer
11
retries
Set NT Domain server
connection retry
attempts.
Unsigned integer
12
serverCheck
Check the reachability
of configured servers.
4.2 system RADIUS_Settings
S.No
Command Name
Description
Type and Description
1
save
Save LDAP
configuration
changes.
2 exit
Save LDAP
configuration
changes and exit.
3 cancel
Roll back
configuration
changes.
4
Authentication_Server_1
Set primary server IP
address.
IP address AAA.BBB.CCC.DDD
where each part is in the range 0255
5
Authentication_Server_2
Set second
NULL
4.3 system LDAP_Settings
53
alternative server IP
address.
IP address AAA.BBB.CCC.DDD
where each part is in the range 0255
6
Authentication_Server_3
Set third alternative
server IP address.
IP address AAA.BBB.CCC.DDD
where each part is in the range 0255
7
LDAP_Base_DN
Set LDAP Base DN
String
8
Second_LDAP_Base_DN
Set second
alternative LDAP
Base DN
String
9
Third_LDAP_Base_DN
Set third alternative
LDAP Base DN
String
10
LDAPAttribute1
Set LDAP Attribute 1
String
11
LDAPAttribute2
Set LDAP Attribute 2
String
12
LDAPAttribute3
Set LDAP Attribute 3
String
13
LDAPAttribute4
Set LDAP Attribute 4
String
14
timeout
Set LDAP server
connection timeout.
Unsigned integer
15
retries
Set LDAP server
connection retry
attempts.
Unsigned integer
16
serverCheck
Check the
reachability of
configured servers.
4.4 system POP3_Settings POP3_Server_Configuration
S.No
Command Name
Description
Type and
Description
1
save
Save POP3 configuration changes.
2
exit
Save POP3 configuration changes
and exit.
3
cancel
Roll back configuration changes.
4
Authentication_Server_1
Set primary server.
String
5
Authentication_Server_2
Set secondary server.
String
6
Authentication_Server_3
Set optional server.
String
54
7
Authentication_Port_1
Set port for primary server.
Port number
8
Authentication_Port_2
Set port for secondary server.
Port number
9
Authentication_Port_3
Set port for optional server.
Port number
10
SSL_Enable_1
Enable SSL for primary server.
Boolean choice
11
SSL_Enable_2
Enable SSL for secondary server.
Boolean choice
12
SSL_Enable_3
Enable SSL for optional server.
Boolean choice
13
CA_File_1
CAFILE for primary server.
String
14
CA_File_2
CAFILE for secondary server.
String
15
CA_File_3
CAFILE for optional server.
String
16
serverCheck
Check the reachability of configured
servers.
4.5 system POP3_Settings POP3_Trusted_CA
S.No
Command
Name
Description
Type and Description
1
exit
Exit
POP3_Trusted_CA.
2
add
Add a certificate.
String
IP address AAA.BBB.CCC.DDD where each
part is in the range 0-255
3
delete
Delete a certificate.
String
S.No
Command Name
Description
Type and
Description
1
save
Save logging configuration
changes.
2
exit
Save logging configuration
changes and exit current
mode.
3
cancel
Roll back logging configuration
changes.
4
unicast_traffic_logs
All Unicast Traffic logs
Enable/Disable
Boolean choice
4.6 system logging ipv4 configure
55
5
broadcast_or_multicast_traffic_logs
All Broadcast/Multicast Traffic
logs Enable/Disable
Boolean choice
6
source_mac_filter_logs
Source mac filter logs
Enable/Disable
Boolean choice
7
bandwidth_limit_logs
Bandwidth Limit logs
Enable/Disable
Boolean choice
8
ftp_logs
FTP logs Enable/Disable
Boolean choice
9
icmp_invalid_logs
Invalid ICMP Packets logs
Enable/Disable
Boolean choice
10
icmp_redirect_logs
Redirected ICMP Packets logs
Enable/Disable
Boolean choice
11
log_invalid_packet
Log invalid packet
Enable/Disable
Boolean choice
4.7 system logging facility configure <facility>
S.No
Command
Name
Description
Type and
Description
1
<facility>
System logging facility configuration mode.
Logging Facility
Type.
2
save
Save log facility configuration changes.
3
exit
Save log facility configuration changes and
exit current mode.
4
cancel
Roll back log facility configuration changes.
5
level_options_set
Set level options. This command can be run
multiple times in this view to set different
level options.
Logging Facility
Type.
Logging Level
Options Type.
Boolean choice
S.No
Command Name
Description
Type and Description
1
save
Save remote logging
configuration
changes.
2
exit
Save remote logging
configuration
changes and exit
current mode.
3
cancel
Roll back remote
logging configuration
changes.
4
log_identifier
Set the log identifier
4.8 system logging remote configure
56
prefixed to both, email and Syslog
messages.
String
5
email_logs_enable
Set whether or not
system emails
scheduled logs.
Boolean choice
6
email_server
Set options for
emailing of logs.
String
7
return_email
Set email address
SMTP server replies
are sent.
String
8
send_to_email
Set email address
where logs and alerts
will be sent.
String
9
smtp_auth
Set SMTP
authentication
details.
10
smtp_auth type
Set SMTP
authentication types.
SMTP Authentication
Types.
11
smtp_auth username
Set SMTP
authentication
username (for plain
and CRAM-MD5
auth).
String
12
smtp_auth password
Set SMTP
authentication
password (for plain
and CRAM-MD5
auth).
String
13
identd_from_smtp_server_enable
Enable/Disable the
identd from smtp
server.
Boolean choice
14
schedule
Set schedule for
sending log by email.
15
schedule unit
Set schedule unit.
Schedule Unit Types.
16
schedule day
Set schedule day.
Schedule Day Types.
17
schedule time
Set schedule time.
Schedule Time Units
Types.
18
schedule meridiem
Set schedule
meridiem.
Schedule Meridiem
Types.
57
19
syslog_server
syslog
20
syslog_server server_name1
server1
21
syslog_server server_name2
server2
22
syslog_server server_name3
server3
23
syslog_server server_name4
server4
24
syslog_server server_name5
server5
25
syslog_server server_name6
server6
26
syslog_server server_name7
server7
27
syslog_server server_name8
server8
28
syslog_server server_name1
enable
Boolean Choice Y/N
Boolean choice
29
syslog_server server_name1
name
Set Syslog server.
IP address
AAA.BBB.CCC.DDD
where each part is in the
range 0-255
30
syslog_server server_name1
severity
Set Syslog severity.
syslog server severity
types
31
syslog_server server_name1
facility
Set Syslog facility.
syslog server facility ID
types
32
syslog_server server_name2
enable
Boolean Choice Y/N
Boolean choice
33
syslog_server server_name2
name
Set Syslog server.
IP address
AAA.BBB.CCC.DDD
where each part is in the
range 0-255
34
syslog_server server_name2
severity
Set Syslog severity.
syslog server severity
types
35
syslog_server server_name2
facility
Set Syslog facility.
syslog server facility ID
types
36
syslog_server server_name3
enable
Boolean Choice Y/N
Boolean choice
37
syslog_server server_name3
name
Set Syslog server.
IP address
AAA.BBB.CCC.DDD
where each part is in the
range 0-255
38
syslog_server server_name3
severity
Set Syslog severity.
syslog server severity
58
types
39
syslog_server server_name3
facility
Set Syslog facility.
syslog server facility ID
types
40
syslog_server server_name4
enable
Boolean Choice Y/N
Boolean choice
41
syslog_server server_name4
name
Set Syslog server.
IP address
AAA.BBB.CCC.DDD
where each part is in the
range 0-255
42
syslog_server server_name4
severity
Set Syslog severity.
syslog server severity
types
43
syslog_server server_name4
facility
Set Syslog facility.
syslog server facility ID
types
44
syslog_server server_name5
enable
Boolean Choice Y/N
Boolean choice
45
syslog_server server_name5
name
Set Syslog server.
IP address
AAA.BBB.CCC.DDD
where each part is in the
range 0-255
46
syslog_server server_name5
severity
Set Syslog severity.
syslog server severity
types
47
syslog_server server_name5
facility
Set Syslog facility.
syslog server facility ID
types
48
syslog_server server_name6
enable
Boolean Choice Y/N
Boolean choice
49
syslog_server server_name6
name
Set Syslog server.
IP address
AAA.BBB.CCC.DDD
where each part is in the
range 0-255
50
syslog_server server_name6
severity
Set Syslog severity.
syslog server severity
types
51
syslog_server server_name6
facility
Set Syslog facility.
syslog server facility ID
types
52
syslog_server server_name7
enable
Boolean Choice Y/N
Boolean choice
59
53
syslog_server server_name7
name
Set Syslog server.
IP address
AAA.BBB.CCC.DDD
where each part is in the
range 0-255
54
syslog_server server_name7
severity
Set Syslog severity.
syslog server severity
types
55
syslog_server server_name7
facility
Set Syslog facility.
syslog server facility ID
types
56
syslog_server server_name8
enable
Boolean Choice Y/N
Boolean choice
57
syslog_server server_name8
name
Set Syslog server.
IP address
AAA.BBB.CCC.DDD
where each part is in the
range 0-255
58
syslog_server server_name8
severity
Set Syslog severity.
syslog server severity
types
59
syslog_server server_name8
facility
Set Syslog facility.
syslog server facility ID
types
4.9 system logging ipv6 configure
S.No
Command Name
Description
Type and
Description
1
save
Save ipv6 logging configuration
changes.
2
exit
Save ipv6 logging configuration
changes and exit current mode.
3
cancel
Roll back ipv6 logging configuration
changes.
4 lan_option_accept_enable
Enable/Disable logging for the LAN to
option Accept packets
Boolean choice
5
lan_option_drop_enable
Enable/Disable logging for the LAN to
option Dropped packets
Boolean choice
6
option_lan_accept_enable
Enable/Disable logging for the option
to LAN Accept packets
Boolean choice
7
option_lan_drop_enable
Enable/Disable logging for the option
to LAN Dropped packets
Boolean choice
S.No
Command Name
Description
Type and Description
4.10 system Radius-Settings
60
1
save
Save RADIUS
configuration changes.
2
exit
Save RADIUS
configuration changes
and exit current mode.
3
cancel
Roll back configuration
changes.
4
primary-radiusserver
Set Primary RADIUS
server IP address.
IP address AAA.BBB.CCC.DDD
where each part is in the range 0255
5
secondary-radiusserver
Set Secondary RADIUS
server IP address.
IP address AAA.BBB.CCC.DDD
where each part is in the range 0255
6
optional-radiusserver
Set Optional RADIUS
server IP address.
IP address AAA.BBB.CCC.DDD
where each part is in the range 0255
7
primary-serverauthentication-port
Set Primary RADIUS
server port.
Port number
8
secondary-serverauthentication-port
Set Secondary RADIUS
server port.
Port number
9
optional-serverauthentication-port
Set Optional RADIUS
server port.
Port number
10
primary-serversecret
Set Primary RADIUS
server secret.
String
11
secondary-serversecret
Set Secondary RADIUS
server secret.
String
12
optional-serversecret
Set Optional RADIUS
server secret.
String
13
primary-servertimeout
Set primary server
connection timeout.
14
secondary-servertimeout
Set secondary server
connection timeout.
15
optional-servertimeout
Set optional server
connection timeout.
16
primary-serverretries
Set primary server
connection retry attempts.
number in range of 1 to 9
17
secondary-serverretries
Set secondary server
connection retry attempts.
number in range of 1 to 9
18
optional-serverretries
Set optional server
connection retry attempts.
number in range of 1 to 9
19
serverCheck
Check the reachability of
61
configured servers.
4.11 system remote_management https configure
S.No
Command Name
Description
Type and Description
1
save
Save access Management
changes for https.
2
exit
Save access Management
changes for https and exit
current mode.
3
cancel
Roll back Remote Mgmt
changes.
4
enable
Enable/disable remote mgmt
over https.
Boolean choice
5
type
Enable/disable remote mgmt
over https.
Unsigned integer
6
from_address
Set the starting IP in case of
range, and the IP to be allowed
access in case of granting
access to a particular machine
IP address
AAA.BBB.CCC.DDD where
each part is in the range 0255
7
end_address
Set the Ending IP in case of
range.
IP address
AAA.BBB.CCC.DDD where
each part is in the range 0255
8
port
Set the port you want to use for
HTTP.
Unsigned integer
9
enable_remote_snmp
Enable/disable remote snmp.
Boolean choice
S.No
Command
Name
Description
Type and Description
1
save
Save access Management
changes for telnet.
2
exit
Save access Management
changes for telnet and exit
current mode.
3
cancel
Roll back changes to Remote
Mgmt.
4
enable
Enable/disable Remote mgmt
over telnet.
Boolean choice
5
type
The kind of access you want to
allow.
Unsigned integer
6
from_address
Set the starting IP range, and
4.12 system remote_management telnet configure
62
allow the IP to grant access to a
particular machine.
IP address AAA.BBB.CCC.DDD
where each part is in the range 0255
7
to_address
Set the Ending IP in case of
range.
IP address AAA.BBB.CCC.DDD
where each part is in the range 0255
4.13 system snmp trap configure <agent_ip>
S.No
Command
Name
Description
Type and Description
1
<agent_ip>
SNMP trap configuration mode.
IP address
AAA.BBB.CCC.DDD where
each part is in the range 0-255
2
save
Save SNMP trap configuration
changes.
3
exit
Save SNMP trap configuration
changes and exit current mode.
4
cancel
Roll back SNMP configuration
changes.
5
agent
The IP address of the SNMP agent.
IP address
AAA.BBB.CCC.DDD where
each part is in the range 0-255
6
snmp_version
Snmp Version v1/v2/v3
String
7
port
Which SNMP trap port the trap
messages will be sent to.
Port number
8
community
The community string to which the
agent belongs. Most agents are
configured to listen for traps in the
Public community.
String
S.No
Command
Name
Description
Type and Description
1
<agent_ip>
Delete a SNMP trap
configuration.
IP address AAA.BBB.CCC.DDD where
each part is in the range 0-255
S.No
Command Name
Description
Type and Description
1
<user>
SNMP v3 User list configuration
changes.
SNMPv3 user list type.
4.14 system snmp trap delete <agent_ip>
4.15 system snmp users configure <user>
63
2
save
Save SNMP trap configuration
changes.
3
exit
Save SNMP v3 Users
configuration changes and exit
current mode.
4
cancel
Roll back SNMP v3 Users
configuration changes.
5
security_level
Authentication and privacy
settings.
Security level type for
SNMPv3 user list.
6
authentication_algo
Choose between MD5 or SHA
authentication.
SNMPv3 user list
authentication algorithm
type.
7
privacy_algorithm
DES-56 privacy is available for
authentication negotiation.
SNMPv3 user list
privacy algorithm type.
8
authentication_password
Shared authentication
password with the SNMPv3
user.
String.
9
privacy_password
Shared privacy password with
the SNMPv3 user.
String.
4.16 system snmp sys configure
S.No
Command
Name
Description
Type and
Description
1
save
Save SNMP system configuration changes.
2 cancel
Roll back SNMP configuration changes.
3
exit
Save SNMP system configuration changes and
exit current mode.
4
sys-contact
Set system contact information.
String.
5
sys-location
Set system location information.
String.
6
sys-name
Set system name information.
String.
S.No
Command
Name
Description
Type and Description
1
save
Save SNMP access control configuration
changes.
2
exit
Save SNMP access configuration
changes and exit current mode.
3
cancel
Roll back SNMP configuration changes.
4.17 system snmp access add
64
4
agent
The IP address of the SNMP agent.
IP address
AAA.BBB.CCC.DDD
where each part is in the
range 0-255
5
subnet_mask
The network mask used to determine the
list of allowed SNMP managers. To allow
any IP on the network to manage the
device, enter 255.255.255.0. For a
specific host, enter 255.255.255.255. To
allow global access, enter 0.0.0.0.
IP address
AAA.BBB.CCC.DDD
where each part is in the
range 0-255
6
accessType
Which SNMP trap port that the trap
messages will be sent to.
SNMP access type for
SNMP community.
7
community
The community string to which the agent
belongs. Most agents are configured to
listen for traps in the Public community.
String
4.18 system snmp access edit <rowid>
S.No
Command
Name
Description
Type and Description
1
<rowid>
SNMP configuration mode.
Unsigned integer.
2
save
Save SNMP access control configuration
changes.
3 exit
Save SNMP access configuration
changes and exit current mode.
4
cancel
Roll back SNMP configuration changes.
5
agent
The IP address of the SNMP agent.
IP address
AAA.BBB.CCC.DDD
where each part is in the
range 0-255
6
subnet_mask
The network mask used to determine the
list of allowed SNMP managers. To allow
any IP on the network to manage the
device, enter 255.255.255.0. For a
specific host, enter 255.255.255.255. To
allow global access, enter 0.0.0.0.
IP address
AAA.BBB.CCC.DDD
where each part is in the
range 0-255
7
accessType
Which SNMP trap port the trap messages
will be sent to.
SNMP access type for
SNMP community
8
community
The community string to which the agent
belongs. Most agents are configured to
listen for traps in the Public community.
String
65
4.19 system snmp access delete <rowid>
S.No
Command Name
Description
Type and Description
1
<rowid>
SNMP access configuration mode.
Unsigned integer.
S.No
Command Name
Description
Type and
Description
1
save
Save time configuration changes.
2
exit
Save time configuration changes and
current mode.
3
cancel
Roll back time configuration changes.
4 timezone
Timezone.
Timezone.
5
auto_daylight
Specify whether system automatically
adjusts for daylight savings time.
Boolean choice.
6
configure_ntp_servers
Specify whether to use NTP servers or
if user will set the date and time.
Boolean choice.
7
use_default_servers
Specify whether to use system default
NTP servers.
Boolean choice.
8
ntp_server1
Set NTP server#1.
String.
9
ntp_server2
Set NTP server#2.
String
10
ntp_year
Set year for the date.
Year.
11
ntp_month
Set month for the date.
Month in the format
MM(01-12)
12
ntp_day
Set day for the date.
Day in the format
DD(01-31)
13
ntp_hour
Set hour for the date.
HH(00-23) using 24
hour clock
14
ntp_minutes
Set minutes for the date.
Minute in the format
MM(00-59)
15
ntp_seconds
Set seconds for the date.
Second in the format
SS(00-59)
16
ntp_sync_interval
Set seconds for the date.
Unsigned integer.
4.20 system time configure
66
4.21 system traffic_meter configure
S.No
Command Name
Description
Type and
Description
1
save
Save traffic meter configuration
changes.
2 exit
Save traffic meter configuration
changes and exit current mode.
3
cancel
Roll back traffic meter configuration
changes.
4
enable
Enable/Disable the traffic meter.
Boolean choice.
5
limit_type
Set traffic Limit Type 0(No limit),
1(Download only), 2(Both Directions)
Traffic meter types.
6
monthly_limit
Set monthly limit for the traffic meter.
Unsigned integer.
7
increase_limit_enable
Enable/Disable whether you can
increase limit of the traffic meter.
Boolean choice.
8
increase_limit_by
Set a value for increasing the limit of
the traffic meter.
Unsigned integer.
9
counter
Set the traffic counter as either a
specific time or restart counter.
Traffic counter type.
10
time_hour
Set hours for restart time.
HH(00-23) using 24
hour clock
11
time_minute
Set minutes for restart time.
minute in the format
MM(00-59)
12
day_of_month
Set day of the month.
Calendar day of the
month.
13
send_email_report
Enable/Disable send email report.
Boolean choice.
14
block_type
Set block Traffic type 0(block all traffic)
1(block all traffic except email)
Block traffic type.
15
send_email_alert
Enable/Disable send email alert.
Boolean choice.
S.No
Command
Name
Description
Type and
Description
1
save
Save Configurable OPTION settings.
2
exit
Save configurable OPTION settings and exit
current mode.
3
cancel
Roll back Configurable OPTION settings
4.22 system usb usb1 configure
67
changes.
4
enable
Enable USB1
Boolean choice.
5
printer_enable
Enable printer USB
Boolean choice.
6
Storage_enable
Enable Storage USB
Boolean choice.
7
usb_type
Select the USB type
3G_USB_ADAPTOR/USB_Disc
USB device type.
4.23 system usb usb2 configure
S.No
Command
Name
Description
Type and
Description
1
save
Save USB1 settings.
2 exit
Save USB2 settings and exit current mode.
3
cancel
Roll back changes to Configurable OPTION
settings.
4
enable
Enable USB2.
Boolean choice.
5
printer_enable
Enable printer.
Boolean choice.
6
Storage_enable
Enable USB2.
Boolean choice.
7
usb_type
Select the USB type
3G_USB_ADAPTOR/USB_Disc
USB device type.
S.No
Command Name
Description
Type and
Description
1
save
Save system group configuration
changes.
2
exit
Save system group configuration
changes and exit current mode.
3 cancel
Roll back system group configuration
changes.
4
groupname
Enter the Group Name here.
String.
5
description
Enter a brief description of a group
here.
String.
6
Privilege_Type
Select the privilege type for a group.
7
Privilege_Type Admin
Give ADMIN privilege to a group.
Boolean choice.
8
Privilege_Type sslvpn
Give sslvpn privilege to a group.
Boolean choice.
4.24 system group add
68
9
Privilege_Type L2TP
Give L2TP privilege to a group.
Boolean choice.
10
Privilege_Type Pptp
Give Pptp privilege to a group.
Boolean choice.
11
Privilege_Type Xauth
Give Xauth privilege to a group.
Boolean choice.
12
Privilege_Type Guest
Give Guest privilege to a group.
Boolean choice.
13
Privilege_Type
RuntimeAuth
Give RuntimeAuth privilege to a
group.
Boolean choice.
14
grouptimeOut
Enter the time out for a group.
Idle timeout value for
user.
15
SSLVPN_Settings
SSLVPN configuration for a group.
String
Supported
authentication type.
4.25 system group edit <row_id>
S.No
Command
Name
Description
Type and
Description
1
<row_id>
System group edit mode.
Unsigned integer.
2
save
Save system group configuration changes.
3
exit
Save system group configuration changes and
exit current mode.
4
cancel
Roll back system group configuration changes.
5
description
Enter a brief description of a group here.
String.
S.No
Command Name
Description
Type and Description
1
<row_id>
Delete system group’s mode.
Unsigned integer
S.No
Command Name
Description
Type and
Description
1
save
Save changes to system user configuration.
2
exit
Save changes to system user configuration
and exit current mode.
3
cancel
Roll back changes to system user
configuration.
4
username
Enter username here.
String.
4.26 system group delete <row_id>
4.27 system users add
69
5
FirstName
Enter the user's first name here.
String.
6
LastName
Enter the user's last name here.
String.
7
password
Enter the password here.
String.
8
password_confirm
Re-Enter the password here.
String.
9
groupname
Enter the group name here.
String.
4.28 system users edit <row_id>
S.No
Command Name
Description
Type and
Description
1
<row_id>
Edit mode for system users.
Unsigned integer.
2
save
Save changes to the system user’s
configuration.
3
exit
Save changes to the system user’s
configuration and exit current mode.
4 cancel
Roll back changes to the system user’s
configuration.
5
FirstName
Enter the user's first name here.
String.
6
LastName
Enter the user's last name here.
String.
7
change_password
Change the user's password.
String.
String.
String.
S.No
Command Name
Description
Type and Description
1
<row_id>
Delete system user mode.
Unsigned integer.
S.No
Command Name
Description
Type and
Description
1
<group_id>
Group access control
configuration.
Unsigned
integer.
2
save
Save changes to group
access control configuration.
3
exit
Save changes to group
4.29 system users delete <row_id>
4.30 system group groupaccesscontrol configure <group_id>
70
access control configuration
and exit current mode.
4
cancel
Roll back changes to group
access control configuration.
5
deny_login
Deny login.
Boolean
choice.
6
deny_login_Option
Deny login option.
Boolean
choice.
7
allow_login_from_defined_ips
Login from IP.
Boolean
choice.
8
allow_login_from_defined_browsers
Login from browser.
Boolean
choice.
4.31 system group access_control_browser add
S.No
Command
Name
Description
Type and
Description
1
save
Save configuration changes to the group access
control browser.
2
exit
Save configuration changes to the group access
control browser and exit current mode.
3
cancel
Roll back configuration changes to the group
access control browser.
4
group_id
Group id.
Unsigned
integer.
5
browser_name
Browser name.
Supported
browsers.
S.No
Command
Name
Description
Type and
Description
1
<row_id>
Delete a browser from the Access Control
browser list.
Unsigned integer.
S.No
Command
Name
Description
Type and Description
1
save
Save changes to group access
control IP configuration.
4.32 system group access_control_browser delete <row_id>
4.33 system group access_control_ip add
71
2
exit
Save changes to group access
control IP configuration and
exit current mode.
3 cancel
Roll back changes to group
access control IP
configuration.
4
group_id
Group ID.
Unsigned integer.
5
address_type
Address type.
Source address type for users IP
policy.
6
source_address
Set the source address.
IP address AAA.BBB.CCC.DDD
where each part is in the range 0255
7
mask_length
Set the source network mask
length.
Number in range of 1 to 32
4.34 system group access_control_ip delete <row_id>
S.No
Command Name
Description
Type and Description
1
<row_id>
Delete an IP from Access Control IPS
list.
Unsigned integer.
S.No
Command Name
Description
Type and Description
1
<ip_address>
Ping an Internet Address.
String.
S.No
Command
Name
Description
Type and
Description
1
<dns>
Retrieves the IP address of a Web, FTP, Mail or
any other Server on the Internet.
String.
S.No
Command
Name
Description
Type and
Description
1
<ip_address>
Display all the routers present between the
destination IP address and this router.
String.
S.No
Command
Name
Description
Type and Description
5.0 Configuration commands under branch UTIL
5.1 util system_check ping <ip_address>
5.2 util system_check dns_lookup <dns>
5.3 util system_check traceroute <ip_address>
5.4 util system_check capturePackets start <interface>
72
1
<interface>
Start the packet
capture.
Enter “util system_check capturePackets
avail_interfaces” command to get the available
interfaces for packet capture.
5.5 util system_check capturePackets download <fileName> <ipAddr>
S.No
Command Name
Description
Type and Description
1
<fileName> <ipAddr>
Download the packet
capture to the host
machine.
String
IP address AAA.BBB.CCC.DDD
where each part is in the range 0255
S.No
Command Name
Description
Type and Description
1
<enable_reboot>
Reboot the system.
Boolean choice.
S.No
Command Name
Description
Type and Description
1
<ipAddr> <fileName>
To test the USB.
String.
S.No
Command Name
Description
Type and Description
1
<fileName> <ipAddr>
Download the backup
configuration file to the
host machine.
String
IP address AAA.BBB.CCC.DDD
where each part is in the range 0255
S.No
Command Name
Description
Type and Description
1
<IpAddr> <FileName>
For restoring the
configuration.
IP address AAA.BBB.CCC.DDD where
each part is in the range 0-255
String.
S.No
Command Name
Description
Type and Description
1
<IpAddr> <FileName>
For upgrading the
firmware.
IP address AAA.BBB.CCC.DDD where
each part is in the range 0-255
String.
5.6 util schedule-reboot <enable_reboot>
5.7 util usb_test <ipAddr> <fileName>
5.8 util backup_configuration <fileName> <ipAddr>
5.9 util restore_configuration <IpAddr> <FileName>
5.10 util firmware_upgrade <IpAddr> <FileName>
6.0 Configuration commands under branch QOS
73
6.1 qos lan status
S.No
Command Name
Description
Type and
Description
1
lan status
Displays the status of LAN QoS.
2 lan enable
Enables QoS on LAN.
3 lan disable
Disables QoS on LAN.
4
lan trustmode
Configures trust mode configuration
for the controller port.
5
lan trustmode status
Shows the trust mode configuration in
the controller.
6
lan trustmode cos
Configures CoS based QoS for the
controller port.
7 lan trustmode dscp
Configures DSCP based QoS for the
controller port.
8
lan cos-map
Configures the CoS map for the
controller port.
9 lan trustmode cos enable
Configures trust mode CoS based
QoS on LAN.
10
lan trustmode dscp
enable
Configures trust mode as DSCP QoS
on LAN.
11
lan cos-map show
Shows the CoS map for the LAN.
12
lan cos-map configure
Configures CoS map for QoS.
13
lan dscp-map
Configures the DSCP-map for the
controller.
14
lan dscp-map show
Displays DSCP priority mapping on
controller.
15
lan dscp-map configure
Configures DSCP map for QoS.
16
lan cos-to-dscpremarking enable
Enables CoS to DSCP remarking.
17
lan cos-to-dscpremarking disable
Disables CoS to DSCP remarking.
18
lan queue
Queue scheduling and management
configuration.
19
lan queue management
LAN queue management
configuration.
20
lan queue management
show
Shows queue management
configuration.
21
lan queue schedulingalgo
Configures queue scheduling
algorithm.
22
lan queue schedulingalgo set
Sets the queue scheduling algorithm
on the LAN.
23
lan queue schedulingalgo show
Shows the queue scheduling
algorithm on the LAN.
74
24
lan cos-to-dscpremarking configure
Disables CoS to DSCP remarking.
6.2 qos lan enable
S.No
Command Name
Description
Type and
Description
1
lan status
Displays the status of LAN QoS.
2 lan enable
Enables QoS on LAN.
3 lan disable
Disables QoS on LAN.
4
lan trustmode
Configures the trust mode
configuration in the controller.
5 lan trustmode status
Shows the trust mode configuration
on the controller.
6
lan trustmode cos
Configures CoS based QoS for a
controller port.
7 lan trustmode dscp
Configures DSCP based QoS for a
controller port.
8
lan cos-map
Configures a CoS map for the
controller port.
9
lan trustmode cos enable
Configures a trust mode CoS based
QoS for LAN.
10
lan trustmode dscp
enable
Configures trust mode as DSCP QoS
for LAN.
11
lan cos-map show
Shows the CoS map for the LAN.
12
lan cos-map configure
Configures CoS map for QoS.
13
lan dscp-map
Configures the DSCP map for a
controller.
14
lan dscp-map show
Displays DSCP priority mapping on a
controller.
15
lan dscp-map configure
Configures DSCP map for QoS.
16
lan cos-to-dscpremarking enable
Enables CoS to DSCP remarking.
17
lan cos-to-dscpremarking disable
Disables CoS to DSCP remarking.
18
lan queue
Queue scheduling and management
configuration.
19
lan queue management
LAN queue management
configuration.
20
lan queue management
show
Shows a queue management
configuration.
21
lan queue schedulingalgo
Configures a queue scheduling
algorithm.
22
lan queue schedulingalgo set
Sets the queue scheduling algorithm
on the LAN.
75
23
lan queue schedulingalgo show
Shows the queue scheduling
algorithm on the LAN.
24
lan cos-to-dscpremarking configure
Disables CoS to DSCP remarking.
6.3 qos lan disable
S.No
Command Name
Description
Type and
Description
1
lan status
Displays the status of LAN QoS.
2 lan enable
Enables QoS on LAN.
3 lan disable
Disables QoS on LAN.
4
lan trustmode
Configures trust mode configuration
for the controller.
5
lan trustmode status
Shows the trust mode configuration on
the controller.
6 lan trustmode cos
Configures CoS based QoS for a
controller port.
7
lan trustmode dscp
Configures DSCP based QoS for a
controller port.
8
lan cos-map
Configures the CoS map for a
controller port.
9
lan trustmode cos enable
Configures trust mode CoS based
QoS on LAN.
10
lan trustmode dscp
enable
Configures trust mode as DSCP QoS
on LAN.
11
lan cos-map show
Shows the CoS map for the LAN.
12
lan cos-map configure
Configures CoS map for QoS.
13
lan dscp-map
Configures a DSCP map for the
controller.
14
lan dscp-map show
Displays DSCP priority mapping on
the controller.
15
lan dscp-map configure
Configures DSCP map for QoS.
16
lan cos-to-dscpremarking enable
Enables CoS to DSCP remarking.
17
lan cos-to-dscpremarking disable
Disables CoS to DSCP remarking.
18
lan queue
Queues scheduling and management
configuration.
19
lan queue management
LAN queue management
configuration.
20
lan queue management
show
Queues management configuration
show.
21
lan queue schedulingalgo
Configures a queue scheduling
algorithm.
76
22
lan queue schedulingalgo set
Sets the queue scheduling algorithm
in the LAN controller.
23
lan queue schedulingalgo show
Shows the queue scheduling
algorithm in the LAN controller.
24
lan cos-to-dscpremarking configure
Disables CoS to DSCP remarking.
6.4 qos lan trustmode cos enable <lanPort>
S.No
Command Name
Description
Type and
Description
1
<lanPort>
Configures CoS LAN, QoS has to
be enabled first.
LAN port on the
controller.
2
lan status
Displays the status of LAN QoS.
3 lan enable
Enables QoS on LAN.
4 lan disable
Disables QoS on LAN.
5
lan trustmode
Configures trust mode configuration
for the controller.
6
lan trustmode status
Shows trust mode configuration in
the controller.
7
lan trustmode cos
Configures CoS based QoS for a
controller port.
8 lan trustmode dscp
Configures DSCP based QoS for a
controller port.
9
lan cos-map
Configures the CoS map for a
controller port.
10
lan trustmode cos enable
Configures a trust mode CoS
based QoS on LAN.
11
lan trustmode dscp
enable
Configures trust mode as DSCP
QoS on LAN.
12
lan cos-map show
Shows the CoS map for LAN.
13
lan cos-map configure
Configures CoS map for QoS.
14
lan dscp-map
Configures the DSCP map for a
controller port.
15
lan dscp-map show
Displays DSCP priority mapping on
controller.
16
lan dscp-map configure
Configures DSCP map for QoS.
17
lan cos-to-dscpremarking enable
Enables CoS to DSCP remarking.
18
lan cos-to-dscpremarking disable
Disables CoS to DSCP remarking.
19
lan queue
Queues scheduling and
management configuration.
20
lan queue management
LAN queue management
77
configuration.
21
lan queue management
show
Shows queue management
configuration.
22
lan queue schedulingalgo
Configures a queue scheduling
algorithm.
23
lan queue schedulingalgo set
Sets the queue scheduling
algorithm on the LAN.
24
lan queue schedulingalgo show
Shows the queue scheduling
algorithm on the LAN.
25
lan cos-to-dscpremarking configure
Disables CoS to DSCP remarking.
6.5 qos lan trustmode dscp enable <lanPort>
S.No
Command Name
Description
Type and
Description
1
<lanPort>
Configures DSCP on LAN, QoS has
to be enabled first.
Lan Port on the
controller
2
lan status
Displays status of LAN QoS.
3 lan enable
Enables QoS on LAN.
4
lan disable
Disables QoS on LAN.
5
lan trustmode
Configures trust mode configuration
on the controller.
6
lan trustmode status
Shows the trust mode configuration
in the controller
7 lan trustmode cos
Configures CoS based QoS on a
controller port.
8
lan trustmode dscp
Configures DSCP based QoS on a
controller port.
9
lan cos-map
Configures the CoS map on a
controller port.
10
lan trustmode cos enable
Configures trust mode CoS based
QoS on LAN.
11
lan trustmode dscp
enable
Configures trust mode as DSCP
QoS on LAN.
12
lan cos-map show
Shows the CoS map for the LAN.
13
lan cos-map configure
Configures CoS map for QoS.
14
lan dscp-map
Configures the DSCP map for LAN
the controller.
15
lan dscp-map show
Displays DSCP priority mapping on
the controller.
16
lan dscp-map configure
Configures a DSCP map for QoS.
17
lan cos-to-dscpremarking enable
Enables COS to DSCP remarking.
78
18
lan cos-to-dscpremarking disable
Disables COS to DSCP remarking.
19
lan queue
Queues scheduling and
management configuration.
20
lan queue management
The LAN queue management
configuration.
21
lan queue management
show
Shows the queues management
configuration.
22
lan queue schedulingalgo
Configures queue scheduling
algorithm.
23
lan queue schedulingalgo set
Sets the queue scheduling algorithm
on the LAN.
24
lan queue schedulingalgo show
Shows the queue scheduling
algorithm on the LAN.
25
lan cos-to-dscpremarking configure
Disables CoS to DSCP remarking.
6.6 qos lan cos-map configure <cosValue> <priorityQueue>
S.No
Command Name
Description
Type and
Description
1
<cosValue> <priorityQueue>
Configures a CoS map for
QoS.
CoS value to be
configured.
Priority of the QoS
Queue.
2
lan status
Displays the status of LAN
QoS.
3
lan enable
Enables QoS on LAN.
4 lan disable
Disables QoS on LAN.
5
lan trustmode
Configures trust mode
configuration on the controller.
6
lan trustmode status
Shows the trust mode
configuration on the controller.
7 lan trustmode cos
Configures CoS based QoS
on a controller.
8
lan trustmode dscp
Configures DSCP based QoS
for a controller port.
9 lan cos-map
Configures a CoS map for the
controller port.
10
lan trustmode cos enable
Configures a trust mode CoS
based QoS on LAN.
11
lan trustmode dscp enable
Configures trust mode as
DSCP QoS on LAN.
12
lan cos-map show
Shows the CoS map for LAN.
79
13
lan cos-map configure
Configures CoS map for QoS.
14
lan dscp-map
Configures a DSCP map for
the controller.
15
lan dscp-map show
Displays DSCP priority
mapping for the controller.
16
lan dscp-map configure
Configures DSCP map for
QoS.
17
lan cos-to-dscp-remarking
enable
Enables CoS to DSCP
remarking.
18
lan cos-to-dscp-remarking
disable
Disables CoS to DSCP
remarking.
19
lan queue
Queues scheduling and
management configuration.
20
lan queue management
LAN queue management
configuration.
21
lan queue management show
Shows queue management
configuration.
22
lan queue scheduling-algo
Configures a queue
scheduling algorithm.
23
lan queue scheduling-algo set
Sets the queue scheduling
algorithm on the LAN.
24
lan queue scheduling-algo
show
Show the queue scheduling
algorithm on the LAN.
25
lan cos-to-dscp-remarking
configure
Disables CoS to DSCP
remarking.
6.7 qos lan dscp-map configure <dscpValue> <priorityQueue>
S.No
Command Name
Description
Type and Description
1
<dscpValue> <priorityQueue>
Configures DSCP map
for QoS.
DSCP value to be
configured based on
priority in the QoS queue.
2
lan status
Displays status of LAN
QoS.
3
lan enable
Enables QoS on LAN.
4 lan disable
Disables QoS on LAN.
5
lan trustmode
Configures trust mode
configuration for the
controller.
6
lan trustmode status
Shows the trust mode
configuration on the
controller.
7
lan trustmode cos
Configures CoS based
QoS for a controller
80
port.
8
lan trustmode dscp
Configures DSCP
based QoS for a
controller port.
9 lan cos-map
Configures the CoS
map for a controller
port.
10
lan trustmode cos enable
Configures trust mode
CoS based QoS on
LAN.
11
lan trustmode dscp enable
Configures trust mode
as DSCP QoS on LAN.
12
lan cos-map show
Shows the CoS map for
LAN.
13
lan cos-map configure
Configures CoS map
for QoS.
14
lan dscp-map
Configures the DSCP
map on the controller.
15
lan dscp-map show
Displays DSCP priority
mapping on the
controller.
16
lan dscp-map configure
Configures DSCP map
for QoS.
17
lan cos-to-dscp-remarking
enable
Enables CoS to DSCP.
Remarking.
18
lan cos-to-dscp-remarking
disable
Disables CoS to DSCP
remarking.
19
lan queue
Queue scheduling and
management
configuration.
20
lan queue management
LAN queue
management
configuration.
21
lan queue management show
Shows queue
management
configuration.
22
lan queue scheduling-algo
Configures queue
scheduling algorithm.
23
lan queue scheduling-algo set
Sets the queue
scheduling algorithm for
the LAN.
24
lan queue scheduling-algo
show
Shows queue
scheduling algorithm on
81
the LAN.
25
lan cos-to-dscp-remarking
configure
Disables CoS to DSCP
remarking.
6.8 qos lan cos-to-dscp-remarking enable
S.No
Command Name
Description
Type and
Description
1
lan status
Displays status of LAN QoS.
2 lan enable
Enables QoS on LAN.
3 lan disable
Disables QoS on LAN.
4
lan trustmode
Configures trust mode configuration
for the controller.
5
lan trustmode status
Shows trust mode configuration on
the controller.
6 lan trustmode cos
Configures CoS based QoS for a
controller port.
7
lan trustmode dscp
Configures DSCP based QoS for a
controller port.
8
lan cos-map
Configures a CoS map for a
controller port.
9 lan trustmode cos enable
Configures a trust mode CoS based
QoS on LAN.
10
lan trustmode dscp enable
Configures a trust mode as DSCP
QoS on LAN.
11
lan cos-map show
Shows a CoS map for LAN.
12
lan cos-map configure
Configures CoS map for QoS.
13
lan dscp-map
Configures a DSCP map for the
controller.
14
lan dscp-map show
Displays DSCP priority mapping on
the controller.
15
lan dscp-map configure
Configures a DSCP map for QoS.
16
lan cos-to-dscp-remarking
enable
Enables CoS to DSCP remarking.
17
lan cos-to-dscp-remarking
disable
Disables CoS to DSCP remarking.
18
lan queue
Queues scheduling and
management configuration.
19
lan queue management
LAN queue management
configuration.
20
lan queue management
show
Shows a queue management
configuration.
21
lan queue scheduling-algo
Configures a queue scheduling
algorithm.
82
22
lan queue scheduling-algo
set
Sets the queue scheduling algorithm
on the LAN.
23
lan queue scheduling-algo
show
Shows the queue scheduling
algorithm on the LAN.
24
lan cos-to-dscp-remarking
configure
Disables CoS to DSCP remarking.
6.9 qos lan cos-to-dscp-remarking disable
S.No
Command Name
Description
Type and
Description
1
lan status
Displays the status of LAN QoS.
2 lan enable
Enables QoS on LAN.
3 lan disable
Disables QoS on LAN.
4
lan trustmode
Configures trust mode configuration
on the controller.
5 lan trustmode status
Shows trust mode configuration on
the controller.
6
lan trustmode cos
Configures a CoS based QoS on a
controller port.
7
lan trustmode dscp
Configures DSCP based QoS for a
controller port.
8
lan cos-map
Configures a CoS map for a
controller port.
9
lan trustmode cos enable
Configures a trust mode CoS based
QoS on LAN.
10
lan trustmode dscp enable
Configures trust mode as DSCP
QoS on LAN.
11
lan cos-map show
Shows a CoS map for LAN.
12
lan cos-map configure
Configures a CoS map for QoS.
13
lan dscp-map
Configures a DSCP map for the
controller.
14
lan dscp-map show
Displays DSCP priority mapping on
the controller.
15
lan dscp-map configure
Configures a DSCP map for QoS.
16
lan cos-to-dscp-remarking
enable
Enables CoS to DSCP remarking.
17
lan cos-to-dscp-remarking
disable
Disables CoS to DSCP remarking.
18
lan queue
Queues scheduling and
management configuration.
19
lan queue management
LAN queue management
configuration.
20
lan queue management
show
Shows the queue management
configuration.
83
21
lan queue scheduling-algo
Configures the queue scheduling
algorithm.
22
lan queue scheduling-algo
set
Sets the queue scheduling algorithm
on the LAN.
23
lan queue scheduling-algo
show
Shows the queue scheduling
algorithm on the LAN.
24
lan cos-to-dscp-remarking
configure
Disables CoS to DSCP remarking.
6.10 qos lan cos-to-dscp-remarking status
S.No
Command Name
Description
Type and
Description
1
lan status
Displays the status of LAN QoS.
2 lan enable
Enables QoS on LAN.
3 lan disable
Disables QoS on LAN.
4
lan trustmode
Configures trust mode configuration
on the controller.
5
lan trustmode status
Shows trust mode configuration on
the controller.
6
lan trustmode cos
Configures a CoS based QoS for the
controller port.
7
lan trustmode dscp
Configures a DSCP based QoS for
the controller port.
8
lan cos-map
Configures a CoS map for the
controller port.
9 lan trustmode cos enable
Configures a trust mode CoS based
QoS on LAN.
10
lan trustmode dscp enable
Configures trust mode as DSCP
QoS on LAN.
11
lan cos-map show
Shows a CoS map for LAN.
12
lan cos-map configure
Configures a CoS map for QoS.
13
lan dscp-map
Configures a DSCP map for the
controller.
14
lan dscp-map show
Displays DSCP priority mapping for
the controller.
15
lan dscp-map configure
Configures a DSCP map for QoS.
16
lan cos-to-dscp-remarking
enable
Enables CoS to DSCP remarking.
17
lan cos-to-dscp-remarking
disable
Disables CoS to DSCP remarking.
18
lan queue
Queues a scheduling and
management configuration.
19
lan queue management
LAN queue management
configuration.
84
20
lan queue management
show
Shows a queue management
configuration.
21
lan queue scheduling-algo
Configures a queue scheduling
algorithm.
22
lan queue scheduling-algo
set
Sets a queue scheduling algorithm
on the LAN.
23
lan queue scheduling-algo
show
Shows a queue scheduling algorithm
in the LAN.
24
lan cos-to-dscp-remarking
configure
Disables CoS to DSCP remarking.
6.11 qos lan cos-to-dscp-remarking configure <cosValue> <dscpValue>
S.No
Command Name
Description
Type and
Description
1
<cosValue> <dscpValue>
Configures CoS to DSCP
remarking.
CoS value to be
configured.
DSCP value to be
configured.
2
lan status
Displays the status of LAN
QoS.
3
lan enable
Enables QoS on LAN.
4 lan disable
Disables Qos on LAN.
5
lan trustmode
Configures trust mode
configuration on the controller.
6 lan trustmode status
Shows trust mode
configuration on the controller.
7
lan trustmode cos
Configures a CoS based QoS
on a controller port.
8 lan trustmode dscp
Configures a DSCP based
QoS on a controller port.
9
lan cos-map
Configures a CoS map for the
controller port.
10
lan trustmode cos enable
Configures trust mode CoS
based QoS on LAN.
11
lan trustmode dscp enable
Configures trust mode as
DSCP QoS on LAN.
12
lan cos-map show
Shows a CoS map for LAN.
13
lan cos-map configure
Configures a CoS map for
QoS.
14
lan dscp-map
Configures a DSCP map for
the controller.
15
lan dscp-map show
Displays DSCP priority
mapping for a controller.
85
16
lan dscp-map configure
Configures a DSCP map for
QoS.
17
lan cos-to-dscp-remarking
enable
Enables CoS to DSCP
remarking.
18
lan cos-to-dscp-remarking
disable
Disables CoS to DSCP
remarking.
19
lan queue
Queue scheduling and
management configuration.
20
lan queue management
LAN queue management
configuration.
21
lan queue management show
Shows the queue management
configuration.
22
lan queue scheduling-algo
Configures a queue scheduling
algorithm.
23
lan queue scheduling-algo set
Sets a queue scheduling
algorithm for the LAN.
24
lan queue scheduling-algo
show
Shows a queue scheduling
algorithm for the LAN.
25
lan cos-to-dscp-remarking
configure
Disables CoS to DSCP
remarking.
6.12 qos lan queue scheduling-algo set <sched-algo>
S.No
Command Name
Description
Type and Description
1
<sched-algo>
Sets a queue scheduling
algorithm for the LAN.
Selects a QoS
Scheduling Algorithm
type.
2
lan status
Displays the status of LAN
QoS.
3
lan enable
Enables QoS on LAN.
4
lan disable
Disables QoS on LAN.
5
lan trustmode
Configures trust mode
configuration on the controller.
6
lan trustmode status
Shows trust mode configuration
on the controller.
7 lan trustmode cos
Configures a CoS based QoS
on a controller port.
8
lan trustmode dscp
Configures a DSCP based QoS
on a controller port.
9
lan cos-map
Configures a CoS map for the
controller port.
10
lan trustmode cos
enable
Configures a trust mode CoS
based QoS on LAN.
11
lan trustmode dscp
Configures trust mode as a
86
enable
DSCP QoS on LAN.
12
lan cos-map show
Shows the CoS map for LAN.
13
lan cos-map configure
Configures a CoS map for QoS.
14
lan dscp-map
Configures a DSCP map for the
controller.
15
lan dscp-map show
Displays DSCP priority
mapping on a controller.
16
lan dscp-map configure
Configures a DSCP map for
QoS.
17
lan cos-to-dscpremarking enable
Enables CoS to DSCP
remarking.
18
lan cos-to-dscpremarking disable
Disables CoS to DSCP
remarking.
19
lan queue
Queue scheduling and
management configuration.
20
lan queue management
LAN queue management
configuration.
21
lan queue management
show
Shows queue management
configuration.
22
lan queue schedulingalgo
Configures a queue scheduling
algorithm.
23
lan queue schedulingalgo set
Sets the queue scheduling
algorithm in the LAN.
24
lan queue schedulingalgo show
Shows a queue scheduling
algorithm in the LAN.
25
lan cos-to-dscpremarking configure
Disables CoS to DSCP
remarking.
7.0 Configuration commands under branch NET
S.No
Command
Name
Description
Type and
Description
1
<enable>
It allows you to enable/disable bandwidth
profiles.
Boolean choice
S.No
Command
Name
Description
Type and Description
1
save
Saves bandwidth profile configuration
changes.
2
exit
Saves bandwidth profile configuration
changes and exits current mode.
3
cancel
Rolls back bandwidth profile
7.1 net bandwidth profile enable <enable>
7.2 net bandwidth profile add
87
configuration changes.
4
name
Unique profile name.
String.
5
type
Profile type, priority or rate.
Bandwidth profile type.
6
priority
Priority.
Bandwidth priority type.
7
minimum_rate
Minimum bandwidth provided by
user.
Minimum bandwidth rate 0Max bandwidth Kbps.
8
maximum_rate
Maximum bandwidth provided by
user.
Maximum bandwidth rate
100-100000 Kbps.
7.3 net bandwidth profile edit <row_id>
S.No
Command
Name
Description
Type and Description
1
<row_id>
It allows you to edit the bandwidth
profile.
Unsigned integer.
2
save
Saves the bandwidth profile
configuration changes.
3
exit
Saves the bandwidth profile
configuration changes and exits
current mode.
4
cancel
Rolls back bandwidth profile
configuration changes.
5 name
Unique profile name.
String.
6
type
Profile type, priority or rate.
Bandwidth profile type.
7
priority
Priority.
Bandwidth priority type.
8
minimum_rate
Minimum bandwidth provided by user.
Minimum bandwidth rate 0Max bandwidth Kbps.
9
maximum_rate
Maximum bandwidth provided by
user.
Maximum bandwidth rate
100-100000 Kbps.
S.No
Command
Name
Description
Type and
Description
1
<row_id>
It allows you to delete a bandwidth
profile.
Unsigned integer.
7.4 net bandwidth profile delete <row_id>
88
7.5 net bandwidth traffic_selector add
S.No
Command
Name
Description
Type and Description
1
save
Saves traffic selector
configuration changes.
2
exit
Saves traffic selector
configuration changes and
exits current mode.
3
cancel
Rolls back traffic selector
configuration changes.
4
profile_name
Profile name.
String.
5
service_name
Service name.
String.
6
match_type
IP /MAC address.
Traffic selector match type.
7
ip_address
IP address.
IP address AAA.BBB.CCC.DDD
where each part is in the range 0255
8
mac_address
MAC address.
MAC address AA:BB:CC:DD:EE:FF
where each part is in the range 00FF
9
port_name
Port name.
Traffic selectors and port types.
10
vlan_id
Vlan ID.
Unsigned integer.
S.No
Command
Name
Description
Type and Description
1
<row_id>
It allows you to edit a traffic
selector for a bandwidth
profile.
Unsigned integer.
2
save
Saves traffic selector
configuration changes.
3
exit
Saves traffic selector
configuration changes and
exits current mode.
4
cancel
Rolls back traffic selector
configuration changes.
5
profile_name
Profile name.
String.
6
service_name
Service name.
7.6 net bandwidth traffic_selector edit <row_id>
89
String.
7
match_type
IP /MAC address.
Traffic selector match type.
8
ip_address
IP address.
IP address AAA.BBB.CCC.DDD
where each part is in the range 0255
9
mac_address
MAC address.
MAC address AA:BB:CC:DD:EE:FF
where each part is in the range 00FF
10
port_name
Port Name.
Traffic selectors port types.
11
vlan_id
Vlan ID.
Unsigned integer.
7.7 net bandwidth traffic_selector delete <row_id>
S.No
Command
Name
Description
Type and
Description
1
<row_id>
It allows you to delete a traffic selector for a
bandwidth profile.
Unsigned integer.
S.No
Command
Name
Description
Type and Description
1
<mac_address>
DHCP reserved IPs add/edit
mode.
MAC address AA:BB:CC:DD:EE:FF
where each part is in the range 00FF
2
save
Saves DHCP reserved IPs
configuration changes.
3
exit
Saves DHCP reserved IPs
configuration changes and
exits current mode.
4
cancel
Rolls back DHCP reserved
IPs configuration changes.
5
ip_address
Sets IP address to be
reserved.
IP address AAA.BBB.CCC.DDD
where each part is in the range 0255
S.No
Command
Name
Description
Type and Description
1
<mac_address>
Deletes a specific
7.8 net lan dhcp reserved_ip configure <mac_address>
7.9 net lan dhcp reserved_ip delete <mac_address>
90
reserved IP entry.
MAC address AA:BB:CC:DD:EE:FF where
each part is in the range 00-FF
7.10 net ethernet configure <interface_name>
S.No
Command Name
Description
Type and
Description
1
<interface_name>
Ethernet configuration mode.
String.
2
save
Saves Ethernet configuration changes.
3
exit
Saves Ethernet configuration changes and
exit current mode.
4
cancel
Rolls back configuration changes.
5
vlan-enable
Enables/disables VLAN for this interface.
Boolean choice.
6
native-vlan
Enables/disables the native VLAN status.
Boolean choice.
7
vlanid
Set VLAN Id.
Unsigned integer
S.No
Command Name
Description
Type and Description
1
save
Saves LAN configuration
changes.
2
exit
Saves LAN configuration
changes and exits current
mode.
3
cancel
Rolls back LAN
configuration changes.
4
static
Configures LAN Settings.
5
static address
Sets system LAN IP
address.
IP address AAA.BBB.CCC.DDD
where each part is in the range
0-255
6
static subnet_mask
Sets a system LAN subnet
mask.
IP address AAA.BBB.CCC.DDD
where each part is in the range
0-255
7
dhcp
Configures DHCP Settings.
8
dhcp mode
Sets DHCP mode.
DHCPv4 modes.
9
dhcp start_address
Sets DHCP server’s start
address.
IP address AAA.BBB.CCC.DDD
where each part is in the range
0-255
7.11 net lan ipv4 configure
91
10
dhcp end_address
Sets DHCP server’s end
address.
IP address AAA.BBB.CCC.DDD
where each part is in the range
0-255
11
dhcp default_gw
Sets DHCP default
gateway.
IP address AAA.BBB.CCC.DDD
where each part is in the range
0-255
12
dhcp primary_dns
Sets a primary DNS server.
IP address AAA.BBB.CCC.DDD
where each part is in the range
0-255
13
dhcp secondary_dns
Sets a secondary DNS
server.
IP address AAA.BBB.CCC.DDD
where each part is in the range
0-255
14
dhcp wins_server
Sets a WINS Server
address.
IP address AAA.BBB.CCC.DDD
where each part is in the range
0-255
15
dhcp lease_time
Sets system lease time.
Number in range of 1 to 262800
16
dhcp domain_name
Sets the DHCP domain
name.
String.
17
dhcp relay_gateway
Sets the DHCP relay
gateway address.
IP address AAA.BBB.CCC.DDD
where each part is in the range
0-255
18
dns
Configures DNS settings.
19
dns host_name
Configures DNS settings.
20
dns host_name
mapping
Configures DNS host name
mapping.
21
dns host_name
mapping 1
Configures DNS host name
mapping for the 1st row.
22
dns host_name
mapping 2
Configures DNS host name
mapping for the 2nd Row.
23
dns host_name
mapping 3
Configures DNS host name
mapping for the 3rd row.
24
dns host_name
mapping 4
Configures DNS host name
mapping for the 4th row.
25
dns host_name
mapping 5
Configures DNS host name
mapping for the 5th row.
26
dns host_name
mapping 6
Configures DNS host name
mapping for the 6th row.
92
27
dns host_name
mapping 7
Configures DNS host name
mapping for the 7th row.
28
dns host_name
mapping 8
Configures DNS host name
mapping for the 8th row.
29
dns host_name
mapping 1
host_name
Sets host name.
String.
30
dns host_name
mapping 1 ipaddress
Sets host name.
IP address AAA.BBB.CCC.DDD
where each part is in the range
0-255
31
dns host_name
mapping 2
host_name
Sets host name.
String.
32
dns host_name
mapping 2 ipaddress
Sets host name.
IP address AAA.BBB.CCC.DDD
where each part is in the range
0-255
33
dns host_name
mapping 3
host_name
Sets host name.
String.
34
dns host_name
mapping 3 ipaddress
Sets host name.
IP address AAA.BBB.CCC.DDD
where each part is in the range
0-255
35
dns host_name
mapping 4
host_name
Sets host name.
String.
36
dns host_name
mapping 4 ipaddress
Sets host name.
IP address AAA.BBB.CCC.DDD
where each part is in the range
0-255
37
dns host_name
mapping 5
host_name
Sets host name.
String.
38
dns host_name
mapping 5 ipaddress
Sets host name.
IP address AAA.BBB.CCC.DDD
where each part is in the range
0-255
39
dns host_name
mapping 6
host_name
Sets host name.
String.
40
dns host_name
mapping 6 ipaddress
Sets host name.
IP address AAA.BBB.CCC.DDD
where each part is in the range
93
0-255
41
dns host_name
mapping 7
host_name
Sets host name.
String.
42
dns host_name
mapping 7 ipaddress
Sets host name.
IP address AAA.BBB.CCC.DDD
where each part is in the range
0-255
43
dns host_name
mapping 8
host_name
Sets host name.
String.
44
dns host_name
mapping 8 ipaddress
Sets host name.
IP address AAA.BBB.CCC.DDD
where each part is in the range
0-255
45
proxy
Configures the LAN
proxies.
46
proxy dns_enable
Enables/Disables a DNS
proxy.
Boolean choice.
7.12 net lan default_route configure
S.No
Command
Name
Description
Type and Description
1
save
Saves configuration changes.
2
exit
Saves configuration changes
and exits current mode.
3
cancel
Rolls back configuration
changes.
4
gateway
Please enter default route.
IP address AAA.BBB.CCC.DDD
where each part is in the range 0255
5
enable
Enables the default route
feature on LAN/VLAN.
Boolean choice.
6
enableSNAT
Enables SNAT in the interface
for which a default route can
be entered.
Boolean choice.
7
dnsServer
Please enter resolver IP
address.
IP address AAA.BBB.CCC.DDD
where each part is in the range 0255
S.No
Command Name
Description
Type and Description
1
save
Saves LAN
7.13 net lan ipv6 configure
94
configuration
changes.
2
exit
Saves LAN
configuration
changes and
exits current
mode.
3
cancel
Rolls back LAN
configuration
changes.
4
static
Sets system
LAN Settings.
5
static address
Sets system
LAN IP
address.
IP address
abcd:abcd:abcd:abcd:abcd:abcd:abcd:abcd
where each part is in the range [0-9A-Fa-f:]
6
static prefix_value
Prefix length.
Unsigned integer.
7
dhcp
Sets system
LAN Settings.
8
dhcp
server_enable
Sets DHCPv6
server status.
Boolean choice.
9
dhcp mode
DHCPv6 Mode
DHCPv6 mode.
10
dhcp
domain_name
DHCP server
domain name.
String.
11
dhcp
server_preference
Server
preference.
number
Unsigned integer.
12
dhcp dns_type
DNS server
type.
DHCPv6 DNS server types.
13
dhcp primary_dns
Primary DNS
server.
IP address
abcd:abcd:abcd:abcd:abcd:abcd:abcd:abcd
where each part is in the range [0-9A-Fa-f:]
14
dhcp
secondary_dns
Secondary
DNS server.
IP address
abcd:abcd:abcd:abcd:abcd:abcd:abcd:abcd
where each part is in the range [0-9A-Fa-f:]
15
dhcp rebind_time
Rebind time.
Number in range of 0 to 604800
7.14 net lan ipv6 pool configure <ipv6PoolStartAddr>
S.No
Command Name
Description
Type and Description
1
<ipv6PoolStartAddr>
IPv6 LAN
configuration
IP address
95
add/edit mode.
abcd:abcd:abcd:abcd:abcd:abcd:abcd:abcd
where each part is in the range [0-9A-Fa-f:]
2
save
Saves LAN
configuration
changes.
3
exit
Saves LAN
configuration
changes and
exits current
mode.
4
cancel
Rolls back
LAN
configuration
changes.
5
start_address
Sets DHCPv6
start IP
address.
IP address
abcd:abcd:abcd:abcd:abcd:abcd:abcd:abcd
where each part is in the range [0-9A-Fa-f:]
6
end_address
Sets DHCPv6
end IP
address.
IP address
abcd:abcd:abcd:abcd:abcd:abcd:abcd:abcd
where each part is in the range [0-9A-Fa-f:]
7
prefix_value
Prefix length.
Unsigned integer.
7.15 net lan ipv6 pool delete <ipv6PoolStartAddr>
S.No
Command Name
Description
Type and Description
1
<ipv6PoolStartAddr>
Deletes IPv6
LAN
configuration.
IP address
abcd:abcd:abcd:abcd:abcd:abcd:abcd:abcd
where each part is in the range [0-9A-Fa-f:]
S.No
Command
Name
Description
Type and
Description
1
save
Saves IP Mode configuration changes.
2
exit
Saves IP Mode configuration changes and
exits current mode.
3
cancel
Rolls back IP Mode configuration changes.
4
ip_type
Selects IPv4 only or IPv4/IPv6 mode.
Selects the IP
address type.
S.No
Command Name
Description
Type and
7.16 net mode configure
7.17 net port management configure <portName>
96
Description
1
<portName>
Port management configuration mode.
Port name.
2
save
Saves port management configuration
changes.
3 exit
Saves port management configuration
changes and exits current mode.
4
cancel
Rolls back port management configuration
changes.
5
enable
Enables/Disables the port status.
Boolean
choice.
6
auto_negotiation_enable
Allows the gateway and network to
determine the optimal port settings.
Boolean
choice
7
duplex_mode
Choose between Half Duplex and Full
Duplex based on the port support. The
default is Full Duplex for all ports.
select the
duplex mode
8
speed
One of three port speeds can be selected:
10 Mbps, 100 Mbps and 1000 Mbps (i.e. 1
Gbps). The default setting is 1000 Mbps
for all ports.
select the
speed
7.18 net radvd configure
S.No
Command Name
Description
Type and
Description
1
save
Saves radvd configuration changes.
2
exit
Saves radvd configuration changes and exits
current mode.
3
cancel
Rolls back radvd configuration changes.
4
enable
Enables the radvd process to allow stateless
auto configuration of the IPv6 LAN network.
Boolean choice
5
mode
Selects N to send router advertisements
(RA’s) to all interfaces else Y
radvd
advertisement
mode type.
6
interval
The time in seconds between sending
unsolicited multicast RA’s. The default is 30
seconds.
PPPOE idle
timeout Type.
7
flags
RA Flags.
8
flags
managed_enable
Enable to use the administered/stateful
protocol for address auto configuration.
Boolean choice.
9
flags
other_enable
When the other flag is selected the host uses
administered/stateful protocol of other (i.e.
Boolean choice.
97
non-address) Auto configuration information.
10
preference
Choose between low/medium/high for the
preference associated with this Controller’s
RADVD process
radvd preference
type.
11
mtu
This is used in RA’s to ensure all nodes on
the network use the same MTU value in the
cases where the LAN MTU is not well known.
The default is 1500.
MTU size.
12
life_time
The lifetime in seconds of the route. The
default is 3600 seconds.
Unsigned
integer.
7.19 net radvd pool add
S.No
Command
Name
Description
Type and
Description
1
save
Saves the radvd Pool configuration changes.
2
exit
Saves the radvd Pool configuration changes and
exits current mode.
3
cancel
Rolls back the radvd Pool configuration changes.
4
prefix_type
Selects the prefix type either as 6to4 or
Global/Local/ISATAP.
ipv6 prefix
type.
5
sla_id
The SLA ID (Site-Level Aggregation Identifier) in
the 6to4 address prefix is set for the interface ID on
which the advertisements are sent.
Unsigned
integer.
6
prefix_address
Specifies the IPv6 network address.
String.
7
prefix_length
The prefix length variable is a decimal value that
indicates the number of contiguous, higher order
bits of the address that make up the network
portion of the address.
Unsigned
integer.
8
prefix_life_time
The length of time over which the requesting router
is allowed to use the prefix.
Unsigned
integer.
S.No
Command
Name
Description
Type and
Description
1
<row_id>
radvd Pool configuration mode.
Unsigned
integer.
2
save
Saves radvd Pool configuration changes.
3
exit
Saves radvd Pool configuration changes and exits
current mode.
4
cancel
Rolls back radvd Pool configuration changes.
7.20 net radvd pool edit <row_id>
98
Loading...