Preface
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization
of such revisions or changes.
Manual Revisions
Revision Date Description
1.0 October 8, 2009 • Revision A1 with rmware version 1.0
1.1 March 24, 2010 • Updated with minor changes
2.0 May 11, 2011 • Updated to hardware revision B1
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries.
All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
Copyright © 2009-2011 by D-Link Systems, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Systems, Inc.
2D-Link DAP-1522 User Manual
Table of Contents
Table of Contents
Preface ................................................................................ 2
Manual Revisions .......................................................................... 2
Trademarks .....................................................................................2
Product Overview .............................................................. 5
Package Contents ......................................................................... 5
System Requirements ................................................................. 5
Introduction ...................................................................................6
Features ............................................................................................7
Hardware Overview ..................................................................... 8
Connections ...........................................................................8
LEDs ........................................................................................... 9
Installation .......................................................................10
Wireless Installation Considerations ....................................11
AP/Bridge Mode ..............................................................12
One Touch AP Conguration ..................................................14
Static IPv6 .........................................................................24
LAN Setup .........................................................................25
IPv6 - Auto-Conguration ...........................................25
Advanced ......................................................................................26
MAC Address Filter .............................................................26
Advanced Wireless .............................................................27
Guest Zone ............................................................................28
DHCP Server .........................................................................29
DHCP Reservation .........................................................30
WLAN Partition ....................................................................31
QoS...........................................................................................32
Trac Manager ....................................................................35
Add Trac Manager Rule .................................................36
Wi-Fi Protected Setup .......................................................37
User Limit ...............................................................................38
Maintenance ................................................................................39
Admin .....................................................................................39
Conguration for AP Mode .............................................15
Web-based Conguration Utility ..........................................15
Setup Wizard ................................................................................16
Wireless Setup Wizard .......................................................17
Manual Conguration ...............................................................20
Wireless Settings .................................................................20
LAN Settings .........................................................................22
Dynamic IP .......................................................................22
Static IP ..............................................................................23
LAN Setup .........................................................................24
Time .........................................................................................40
System ....................................................................................41
Language Pack .....................................................................42
Firmware ................................................................................42
System Check .......................................................................44
Schedule ................................................................................45
Status ..............................................................................................46
Device Info ............................................................................46
Wireless ..................................................................................47
Logs .........................................................................................48
3D-Link DAP-1522 User Manual
Table of Contents
Statistics .................................................................................49
IPv6 ..........................................................................................50
Help .................................................................................................51
Conguration for Bridge Mode ......................................52
Web-based Conguration Utility ..........................................52
Setup Wizard ........................................................................53
Wireless ..................................................................................60
LAN Settings .........................................................................61
Static ...................................................................................61
Dynamic ............................................................................62
Advanced ......................................................................................63
Advanced Network Settings ...........................................63
Maintenance ................................................................................64
Admin .....................................................................................64
Time .........................................................................................65
System ....................................................................................66
Language Pack .....................................................................67
Firmware ................................................................................67
Schedule ................................................................................69
Wireless Security .............................................................74
What is WPA? ................................................................................74
Congure WPA/WPA2 ...............................................................75
Connect to a Wireless Network .......................................76
Using Windows® 7 ......................................................................76
Using Windows Vista® ...............................................................79
Congure Security ..............................................................81
Using Windows® XP ...................................................................82
Congure Security ..............................................................83
Troubleshooting ..............................................................85
Wireless Basics .................................................................87
What is Wireless? .........................................................................88
Tips ...................................................................................................90
Wireless Modes ............................................................................91
Networking Basics ...........................................................92
Check your IP address ...............................................................92
Statically Assign an IP address ...............................................93
Status ..............................................................................................70
Device Info ............................................................................70
Logs .........................................................................................71
Statistics .................................................................................72
Help .................................................................................................73
Technical Specications .................................................. 94
Contacting Technical Support ........................................95
Warranty ........................................................................... 96
Registration ...................................................................102
4D-Link DAP-1522 User Manual
Section 1 - Product Overview
D-Link DAP-1522 Xtreme N® Duo Wireless Bridge/AP
Ethernet Cable
Power Adapter
CD-ROM with User Manual
Product Overview
Package Contents
Note: Using a power supply with a dierent voltage than the one included with the DAP-1522 will cause damage and void the warranty
for this product.
System Requirements
• Computers with Windows®, Macintosh®, or Linux-based operating systems with an installed Ethernet adapter
• Internet Explorer Version 6.0 or higher, Firefox 3.0 or higher, Safari 3.0 or higher, or Chrome 2.0 or higher
(for conguration)
5D-Link DAP-1522 User Manual
Section 1 - Product Overview
Introduction
TOTAL PERFORMANCE
Combines award winning access point features and 802.11n wireless technology to provide the best wireless performance.
TOTAL SECURITY
The most complete set of security features including WPA2 and MAC Address Control to protect your network against outside intruders.
TOTAL COVERAGE
Provides greater wireless signal rates even at farther distances for best-in-class Whole Home Coverage.
ULTIMATE PERFORMANCE
The D-Link Xtreme N® Duo Wireless Bridge (DAP-1522) is a 802.11n compliant device that delivers real world performance of up to 13x
faster than an 802.11g wireless connection (also faster than a 100Mbps wired Ethernet connection). Create a secure wireless network
to share photos, les, music, video, printers, and network storage throughout your home. Connect the Xtreme N® Duo Wireless Bridge
to router and share your high-speed Internet access with everyone on the network. In addition, this Wireless Bridge includes a Quality
of Service (QoS) engine that keeps digital phone calls (VoIP) and online gaming smooth and responsive, providing a better Internet
experience.
EXTENDED WHOLE HOME COVERAGE
Powered by Xtreme N® Duo technology, this high performance Wireless Bridge provides superior Whole Home Coverage while reducing
dead spots. The Xtreme N® Duo Wireless Bridge is designed for use in bigger homes and for users who demand higher performance
networking. Add an Xtreme N® Duo notebook or desktop adapter and stay connected to your network from virtually anywhere in your
home.
TOTAL NETWORK SECURITY
The Xtreme N® Duo Wireless Bridge supports all of the latest wireless security features to prevent unauthorized access, be it from over the
wireless network or from the Internet. Support for WPA and WEP standards ensure that you’ll be able to use the best possible encryption
method, regardless of your client devices.
* Maximum wireless signal rate derived from IEEE Standard 802.11g, 802.11a and 802.11n specications. Actual data throughput will vary. Network conditions and environmental
factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will
adversely aect wireless signal range.
6D-Link DAP-1522 User Manual
Section 1 - Product Overview
•FasterWirelessNetworking- The DAP-1522 provides up to 300Mbps* wireless connection with other 802.11n wireless
clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming,
and real-time audio. The performance of this 802.11n wireless access point gives you the freedom of wireless networking
at speeds 13x faster than 802.11g.
•Compatiblewith802.11aand802.11gDevices- The DAP-1522 is still fully compatible with the IEEE 802.11a/g
standard, so it can connect with existing 802.11a/g PCI, USB, and Cardbus adapters.
•AdvancedFirewallFeatures-The Web-based user interface displays advanced network management features including
Content Filtering, which allows easily applied content ltering based on MAC Address.
•WPSPBC-(Wi-Fi Protected Setup Push Button Conguration) Push Button Conguration is a button that can be pressed
to add the device to an existing network or to create a new network. A virtual button can be used on the utility while
a physical button is placed on the side of the device.
Features
This easy setup method allows you to form a secured wireless link between the DAP-1522 and another WPS enabled
device. A PC is no longer needed to log into the Web-based interface.
•WPSPIN-(Wi-Fi Protected Setup Personal Identication Number) A PIN is a unique number that can be used to add
the access point to an existing network or to create a new network. The default PIN may be printed on the bottom of
the access point. For extra security, a new PIN can be generated. You can restore the default PIN at any time. Only the
Administrator (“admin” account) can change or reset the PIN.
•User-friendlySetupWizard-Through its easy-to-use Web-based user interface, the DAP-1522 lets you control what
information is accessible to those on the wireless network, whether from the Internet or from your company’s server.
Congure your access point to your specic settings within minutes.
7D-Link DAP-1522 User Manual
Section 1 - Product Overview
Hardware Overview
Connections
1 2 3 4
1 LAN Ports (1-4) Connect 10/100/1000 Ethernet devices such as computers, switches, and hubs.
2 Mode Switch Three-way switch used to select AP 2.4GHz, AP 5GHz or Bridge mode.
3 Reset Button Pressing the Reset button restores the access point/bridge to its original factory default settings.
4 Power Receptor Receptor for the supplied power adapter.
8D-Link DAP-1522 User Manual
Section 1 - Product Overview
LEDs
1 2 3
1 Power LED A solid blue light indicates a proper connection to the power supply.
2 AP LED A solid light indicates that the DAP-1522 is in AP mode.
3 Bridge LED A solid light indicates that the DAP-1522 is in bridge mode.
4 WPS LED
A solid light indicates a successful WPS connection. A blinking light indicates the device is
trying to establish a connection.
4
9D-Link DAP-1522 User Manual
Section 2 - Installation
Installation
This section will walk you through the installation process. Placement of the DAP-1522 is very important. Do not place the
DAP-1522 in an enclosed area such as a closet, cabinet, or in the attic or garage.
10D-Link DAP-1522 User Manual
Section 2 - Installation
Wireless Installation Considerations
The D-Link wireless access point lets you access your network using a wireless connection from virtually anywhere within the
operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings,
or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types
of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to
follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link access point and other network devices to a minimum.
Each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that
the number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a
45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters)
thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for
better reception.
3. Building Materials make a dierence. A solid metal door or aluminum studs may have a negative eect on
range. Try to position access points, wireless access points, and computers so that the signal passes through
drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh
tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF
noise.
5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security
systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone
base is as far away from your wireless devices as possible. The base transmits a signal even if the phone is not
in use.
11D-Link DAP-1522 User Manual
Section 2 - Installation
DAP-1522
WIRELESS DIR-615
DAP-1522
WIRELESS DIR-615
AP/Bridge Mode
Depending on how you want to use your DAP-1522 will determine which mode you use. This section will help you gure out
which setting works with your setup.
AP Mode
If you already have a wired or wireless router, and want to add an access point to connect your wireless clients to your network,
you will need to move the switch on the back panel of the DAP-1522 to “AP2.4GHz” (for 2.4GHz) or “AP 5GHz” (for 5GHz).
Wired PC Xtreme N
Gigabit Router
Xtreme N Duo
Wireless Bridge/AP
DAP-1522
Bridge Mode
If you want to wirelessly connect multiple Ethernet enabled devices such as game consoles, media players, or network attached
storage devices you will need to move the switch on the back panel of the DAP-1522 to “Bridge”.
Game Console
Xtreme N Duo
Wireless Bridge/AP
DAP-1522
Wired PC
WIRELESS DIR-615
Xtreme N
Gigabit Router
DAP-1522
Media Player
Network DVR
12D-Link DAP-1522 User Manual
Section 2 - Installation
CreateaFullMediaBand(5GHzwireless)Network
If you have two DAP-1522 devices and want to create a wireless network with full MediaBand technology you will need to
connect one Wireless Bridge to your router and move the switch on the back panel to “AP 5GHz”. The second Wireless Bridge will
need to be placed next to your Ethernet-enabled devices and you will need to move the switch on the back panel to “Bridge”.
WIRELESS DIR-615
XTREME N
GIGABIT
ROUTER
GAME
CONSOLE
WIRED PC
DAP-1522
XTREME N DUO
WIRELESS BRIDGE/AP
(DAP-1522)
DAP-1522
XTREME N DUO
WIRELESS BRIDGE/AP
(DAP-1522)
NETWORK
TV VIEWER
NETWORK DVR
DIGITAL
MEDIA
PLAYER
13D-Link DAP-1522 User Manual
Section 2 - Installation
One Touch AP Conguration
This feature makes the Wireless Access Point to have the ability to exchange/learn the Wireless Prole from another Wireless
Router/Access Point.
1. Press the WPS button on your Router or Access Point. WPS LED will ash on and o.
2. Press WPS Push Button on the DAP-1522 and hold it for 5 seconds.
3. When One click AP setup is complete, your DAP-1522 will have the same Wireless settings as your existing Router or AP.
14D-Link DAP-1522 User Manual
Section 3 - Conguration
Conguration for AP Mode
This section will show you how to congure your new D-Link wireless access point using the web-based conguration utility.
Web-based Conguration Utility
To access the conguration utility, open a web browser
such as Internet Explorer and enter http://dlinkap or
http://192.168.0.50 in the address eld.
Enter Admin for the user name and then enter your
password. Leave the password blank by default.
If you get a Page Cannot be Displayed error, please refer to
the Troubleshooting section for assistance.
15D-Link DAP-1522 User Manual
Section 3 - Conguration
Setup Wizard
Click LaunchWirelessSetupWizard to quickly congure
your access point.
If you want to enter your settings without running the
wizard, click Wireless Settings (on the left side) and
skip to page 21.
16D-Link DAP-1522 User Manual
Section 3 - Conguration
Wireless Setup Wizard
This Wizard is designed to assist you in connecting your wireless device to your access point. It will guide you through stepby-step instructions on how to get your wireless device connected.
Click Next to continue.
Select WPS as the conguration method only if your
wireless device supports Wi-Fi Protected Setup.
Skip to page 19 for Manual conguration.
Click Next to continue.
17D-Link DAP-1522 User Manual
Section 3 - Conguration
Click Connect to continue.
Click Next to continue.
Click End to complete the setup.
18D-Link DAP-1522 User Manual
Section 3 - Conguration
Select Manual as the conguration method to set up
your network manually.
Click Next to continue.
Enter a network name (SSID) and uncheck Assign a
network key to automatically create a network key.
To Manually assign a network key, check Assign a
network key and enter a key in the box.
Click Next to continue.
Click Save to save your network settings.
19D-Link DAP-1522 User Manual
Section 3 - Conguration
Manual Conguration
Wireless Settings
Wireless Band:
Enable Wireless:
Wireless
Network Name:
Wireless Mode:
802.11 Band:
802.11 Mode:
Displays either 2.4GHz or 5.0GHz.
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all
the wireless functions.
When you are browsing for available wireless networks,
this is the name that will appear in the list (unless
Visibility Status is set to Invisible, see below). This name
is also referred to as the SSID. For security purposes, it is
highly recommended to change from the pre-congured
network name.
Choose the wireless mode you would like to use.
Operating frequency band. Choose 2.4GHz for visibility
to legacy devices and for longer range. Choose 5GHz for
least interference.
If you choose 2.4GHz band, then select one of the
following:
Mixed 802.11n, 802.11g and 802.11b - Select if you
are using a mix of 802.11n, 11g, and 11b wireless clients.
802.11n Only - Select if you are only using 802.11n
wireless clients.
Mixed802.11gand802.11b- Select if you are using a
mix of 802.11g and 11b wireless clients.
If you selected 5GHz band, then select either 802.11a Only, 802.11n Only, or Mixed 802.11n and 802.11a.
20D-Link DAP-1522 User Manual
Section 3 - Conguration
Enable Auto Channel
Scan:
Wireless Channel:
Band Width:
Enable Hidden
Wireless:
Security Mode:
The Auto Channel Scan setting can be selected to allow the DAP-1522 to choose the channel with the least amount of interference.
Indicates the channel setting for the DAP-1522. The Channel can be changed to t the channel setting for an existing wireless
network or to customize the wireless network. If you enable Auto Channel Scan, this option will be grayed out.
Select the Band Width:
Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
Enabling Hidden Mode is another way to secure your network. With this option enabled, no wireless clients will be able to see
your wireless network . In order for your wireless devices to connect to your Access Point, you will need to manually enter the
Wireless Network Name on each device.
Refer to page 74 for more information regarding the wireless security.
21D-Link DAP-1522 User Manual
Section 3 - Conguration
LAN Settings
Dynamic IP
This section will allow you to change the local network settings of the access point and to congure the DHCP settings.
Device Name:
LAN Connection
Type:
Enter the Device Name of the AP. It is recommended
to change the Device Name if there is more than one
D-Link device within the subnet.
Use the drop-down menu to select Dynamic IP
(DHCP) to automatically obtain an IP address on the
LAN/private network.
22D-Link DAP-1522 User Manual
Section 3 - Conguration
Static IP
Device Name:
IPv4 Connection
Type:
Access Point IP
Address:
Subnet Mask:
Default Gateway:
Enter the Device Name of the AP. It is recommended
to change the Device Name if there is more than one
D-Link device within the subnet.
Use the drop-down menu to select Static IP.
Enter the IP address of the access point. The default
IP address is http://192.168.0.50. If you change the IP
address, once you click Apply, you will need to enter
the new IP address in your browser to get back into the
conguration utility.
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
23D-Link DAP-1522 User Manual
Section 3 - Conguration
LAN Setup
Static IPv6
IPv6 Address:
Subnet Prex
Length:
Default Gateway:
Primary DNS
Server:
Secondary DNS
Server:
Enter the static IPv6 address provided by your
Internet Service Provider.
Enter the IPv6 subnet prex length.
Enter the default gateway IP address.
Enter the primary DNS server IP address.
Enter the secondary DNS server IP address.
24D-Link DAP-1522 User Manual
Section 3 - Conguration
LAN Setup
IPv6 - Auto-Conguration
Obtain IPv6
DNS Servers
automatically:
Use the following
IPv6 DNS Servers:
Primary DNS Server:
Secondary DNS
Server:
Select to obtain IPv6 DNS Servers automatically.
Enter a specic DNS server address.
Enter the primary DNS server IP address.
Enter the secondary DNS server IP address.
25D-Link DAP-1522 User Manual
Section 3 - Conguration
Advanced
MAC Address Filter
The MAC address lter section can be used to lter network access by machines based on the unique MAC addresses of their
network adapter(s). It is most useful to prevent unauthorized wireless devices from connecting to your network. A MAC address
is a unique ID assigned by the manufacturer of the network adapter.
Congure
MAC Filtering:
Add MAC
Filtering
Rule:
When Turn MAC Filtering OFF is selected, MAC addresses
are not used to control network access. When Turn MAC
FilteringONandALLOWcomputerslistedtoaccessthe
network is selected, only computers with MAC addresses
listed in the MAC Address List are granted network access.
When TurnMACFilteringONandDENYcomputerslisted
to access the network is selected, any computer with a
MAC address listed in the MAC Address List is refused access
to the network.
This parameter allows you to manually add a MAC ltering
rule. Click the Add button to add the new MAC ltering rule
to the MAC Filtering Rules list at the bottom of this screen.
26D-Link DAP-1522 User Manual
Section 3 - Conguration
Advanced Wireless
Transmit Power:
WMM Enable:
Short GI:
IGMP Snooping:
Sets the transmit power of the antennas.
WMM is QoS for your wireless network. This will
improve the quality of video and voice applications
for your wireless clients.
Check this box to reduce the guard interval time
therefore increasing the data capacity. However, it is
less reliable and may create higher data loss.
This enables IGMP snooping for the wireless connection.
We recommend enabling this if you often use multicast
services such as video conferencing and streaming
audio/video.
27D-Link DAP-1522 User Manual
Section 3 - Conguration
Guest Zone
The Guest Zone feature will allow you to create temporary zones that can be used by guests to access the Internet. These zones
will be separate from your main wireless network.
Enable Guest
Zone:
Wireless Band:
Wireless Network
Name:
Security Mode:
Enable Guest
Zones Clients
Isolation:
Enable Routing
Between Zones:
Check to enable the Guest Zone feature. Select
the schedule of time when the Guest Zone will
be active. The schedule may be set to Always,
which will allow the particular service to always
be enabled. You can create your own times in the
Maintenance > Schedules section.
Display the wireless band status.
Enter a wireless network name (SSID) that is
dierent from your main wireless network.
Refer to Section 4 - Wireless Security for more
information regarding wireless security.
Tick the check box to prevent the guest clients
from accessing other guests in the guest zone.
Check to allow network connectivity between
the dierent zones created.
28D-Link DAP-1522 User Manual
Section 3 - Conguration
DHCP Server
DHCP stands for Dynamic Host Control Protocol. The DAP-1522 has a built-in DHCP server. The DHCP Server will automatically
assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting
their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers on, they will automatically load
the proper TCP/IP settings provided by the DAP-1522. The DHCP Server will automatically allocate an unused IP address from
the IP address pool to the requesting computer.
Enable DHCP
Server:
DHCP IP Address
Range:
Default Subnet
Mask:
Default
Gateway:
Default Wins:
Default DNS:
Check to enable the DHCP Server on the access
point.
Enter the IP address range to assign to the clients
on your network.
Enter the subnet mask.
Enter the default gateway IP address.
Enter the WINS server IP address.
Enter the DNS server IP address.
Note: If you statically (manually) assign IP addresses
to your computers or devices, make sure the IP
addresses are outside of this range or you may
have an IP conict.
DHCP Lease
Time:
DHCP Client List:
Enter the DHCP lease time (in minutes).
Clients on your network that are assigned IP
addresses will be displayed here.
29D-Link DAP-1522 User Manual
Section 3 - Conguration
DHCP Reservation
If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The access
point will assign the IP address only to that computer or device.
Note: This IP address must be within the DHCP IP Address Range.
Enable:
Computer Name:
IP Address:
MAC Address:
Check this box to enable the reservation.
Enter the computer name or select from the drop-down menu.
Enter the IP address you want to assign to the computer or device. This IP Address must be within the DHCP IP Address Range.
Enter the MAC address of the computer or device.
30D-Link DAP-1522 User Manual
Section 3 - Conguration
WLAN Partition
WLAN Partition allows you to segment your Wireless network by managing access to both the internal station and Ethernet
access to your WLAN.
Internal Station
Connection:
Ethernet to
WLAN Access:
Use the drop-down menu to either Allow or Deny
internal station connection.
Use the drop-down menu to either Allow or Deny
Ethernet to Wireless LAN access.
31D-Link DAP-1522 User Manual
Section 3 - Conguration
QoS
The Quality of Service (QoS) feature regulates the ow of data through the access point by assigning a priority to each packet.
It enhances your experience of wireless network usage by prioritizing the trac of dierent applications. Enabling this option
allows the AP to prioritize trac. There are two options available for the special application.
Enable QoS:
QoS Type:
Priority by
LAN Port:
Enable this option if you want QoS to prioritize your
trac.
There are two options available for your special
application: (1) Priority by LAN Port, and (2) Priority
by Protocol.
There are four priority levels for all LAN ports. The
priority level values assigned are LAN Port 1 for
Background, LAN Port 2 for Best Eort, LAN Port 3 for
Video, and LAN Port 4 for Voice (Voice is the highest
level and Background is the lowest level) at a normal
priority.
32D-Link DAP-1522 User Manual
Section 3 - Conguration
Priority by
Protocol:
Ethernet
Wireless:
Wireless to
Ethernet:
ACK/DHCP/ICMP/
DNS Priority:
Users can set the priority and percentage of total
bandwidth reserved for each of their four traffic
categories. Please note that the combined percentage
value of transmission limits does not have to be
100%. These percentages represent the maximum
bandwidth designated for each trac category.
The value entered here indicates the Ethernet to
wireless speed required before the Advanced QoS
function is enabled. Advanced QoS will be enabled
once the total bandwidth reaches or surpasses the set
value. The suggested range is 800 ~ 96000kbits/sec.
The value entered here indicates the wireless to
Ethernet speed required before the Advanced QoS
function is enabled. Advanced QoS will be enabled
once the total bandwidth reaches or surpasses the set
value. The suggested range is 800 ~ 96000kbits/sec.
Represents the priority value and bandwidth limit
applied to ACK, DHCP, ICMP, and DNS for packet
delivering.
Web Trac
Priority:
Mail Trac
Priority:
Ftp Trac
Priority:
Trac generated by typical Web services (packets sent
through ports 80,443, 3128 and 8080).
Trac generated by e-mail sending and receiving (ports 25, 110, 465 and 995).
Trac generated by FTP Uploading and Downloading (ports 20, 21).
33D-Link DAP-1522 User Manual
Section 3 - Conguration
User Dened
Priority:
Other Trac
Priority:
Denes the priority level for your device.
Other trac generated that does not regard the aforementioned packet delivery.
Note: Normally the wireless connection transmits application data packets based on the wireless to Ethernet speed and Ethernet to wireless speed. Users can
treat the two speeds as system transmission bandwidth, where all applications will share the whole system bandwidth based on assigned priorities. Note that
the maximum amount of bandwidth that can be used is the same as the set value of both speeds.
34D-Link DAP-1522 User Manual
Section 3 - Conguration
Trac Manager
Trac Manager assigns the device’s entire bandwidth, which includes both the wireless to Ethernet speed and Ethernet to
wireless speed. The user may add rules for data transmission performance between the access point device and the individual
client. For unlisted client trac, users can either choose to deny or forward packet transferred for such clients.
Enable Trac
Manager:
Unlisted Clients
Trac:
Ethernet to
Wireless:
Wireless to
Ethernet:
Trac Manager enables trac control of the
delivering and receiving of data packets.
There are two options available for Unlisted
Clients Trac: (1) deny, and (2) forward.
This section allows the user to indicate the
device’s maximum bandwidth from Ethernet
to wireless.
This section allows the user to indicate the
device’s maximum bandwidth from wireless to
Ethernet.
35D-Link DAP-1522 User Manual
Section 3 - Conguration
Add Trac Manager Rule
In Trac Manager Rule enter settings for each user of your network, using adequate IP (Client IP) or MAC address (Client MAC).
Set appropriate Ethernet to Wireless and Wireless to Ethernet speeds for the trac you want to regulate.
Name:
Client IP (optional):
Client MAC (optional) :
Ethernet to Wireless:
Wireless to
Ethernet:
Enter a name for your new rule.
The IP address assigned to the client.
By assigning MAC addresses to the set of trac manager
rules, specic rules can be dened for individual devices.
Represents the available bandwidth for client data to be
forwarded from Ethernet to wireless, the suggested range
is 800 ~ 96000kbits/sec.
Represents the available bandwidth for client data to
be forwarded from wireless to Ethernet, the suggested
range is 800 ~ 96000kbits/sec.
Note: Normally the wireless connection transmits application data packets based on the wireless to Ethernet speed and
Ethernet to wireless speed. Users can treat the two speeds as system transmission bandwidth, where all applications will
share the whole system bandwidth based on assigned priorities. Note that the maximum amount of bandwidth that can be
used is the same as the set value of both speeds.
36D-Link DAP-1522 User Manual
Section 3 - Conguration
Wi-Fi Protected Setup
This feature allows you to add devices to your network using a PIN or button Press. Your devices must support Wi-Fi Protected
Setup in order to be congured by this method.
Enable:
Lock Wireless
Security
Settings:
Select to Enable this feature and add devices to
your network.
Select to Enable this feature and Lock Wireless
Security Settings.
37D-Link DAP-1522 User Manual
Section 3 - Conguration
User Limit
The User Limit section allows you to set a maximum number of wireless clients that can connect to the access point.
Enable User Limit:
User Limit (1-32):
Check the box to enable.
Enter the maximum number of clients allowed to
connect to the access point.
38D-Link DAP-1522 User Manual
Section 3 - Conguration
Maintenance
Admin
This page will allow you to change the Administrator password. The administrator password has read/write access.
Password:
Verify
Password:
Enter a new password for the Administrator Login
Name. The administrator can make changes to the
settings.
Enter the same password that you entered in the
previous text box in order to conrm its accuracy.
39D-Link DAP-1522 User Manual
Section 3 - Conguration
Time
The Time Conguration option allows you to congure, update, and maintain the correct time on the internal system clock.
From this section you can set the time zone that you are in. Daylight Saving can also be congured to automatically adjust the
time when needed.
Time Zone:
Daylight
Saving:
Enable NTP
Server:
NTP Server
Used:
Set the Time
and Date
Manually:
Select your Time Zone from the drop-down menu.
To select Daylight Saving time manually, click the
Enable Daylight Saving check box.
NTP is short for Network Time Protocol. NTP
synchronizes computer clock times in a network
of computers. Check this box to use a NTP server.
This will only connect to a server on the Internet,
not a local server.
Select the NTP server from the drop-down menu
and then click Update Now.
To manually input the time, enter the values in
these elds for the Year, Month, Day, Hour, Minute,
and Second and then click Save Settings. You
can also click the CopyYourComputer’s Time
Settings button at the bottom of the screen.
40D-Link DAP-1522 User Manual
Section 3 - Conguration
System
Save to Local
Hard Drive:
Load from Local
Hard Drive:
Restore to
Factory Default:
Use this option to save the current access point
conguration settings to a le on the hard disk of the
computer you are using. First, click the Save button.
You will then see a le dialog, where you can select a
location and le name for the settings.
Use this option to load previously saved access point
conguration settings. First, click Browse to nd a
previously save le of conguration settings. Then,
click the Load button to transfer those settings to the
access point.
This option will restore all conguration settings back
to the settings that were in eect at the time the access
point was shipped from the factory. Any settings that
have not been saved will be lost, including any rules
that you have created. If you want to save the current
access point configuration settings, use the Save
button above.
Note: Restoring the factory default settings will not reset
the Wi-Fi Protected Status to Not Congured.
Reboot the
Device:
Clear Language
Pack:
Click to reboot the access point.
Click to clear the language pack. This will put the web
UI back to English.
41D-Link DAP-1522 User Manual
Section 3 - Conguration
Firmware
You can upgrade the rmware of the access point here. Make sure the rmware you want to use is on the local hard drive of
the computer. Click on Browse to locate the rmware le to be used for the update. Please check the D-Link support website
for rmware updates at http://support.dlink.com. You can download rmware upgrades to your hard drive from this site.
Browse:
Upload:
After you have downloaded the new rmware, click
Browse to locate the rmware update on your hard
drive. Click Upload to complete the rmware upgrade.
Once you have a rmware update on your computer,
use this option to browse for the le and then upload
the information into the access point.
Language Pack
You can change the language of the web UI by uploading
available language packs.
Browse:
After you have downloaded the new language pack,
click Browse to locate the language pack le on your
hard drive. Click Upload to complete the language
pack upgrade.
42D-Link DAP-1522 User Manual
Section 3 - Conguration
If you load a language pack and would like to go back to English, click Maintenance > System and click on Clear next to Clear
Language Pack.
43D-Link DAP-1522 User Manual
Section 3 - Conguration
System Check
This section Ping Tests by sending ping packets to test if a computer on the internet is running and responding.
Ping Test /
IPv6 Ping Test:
Ping Result:
The Ping Test / IPv6 Ping Test is used to send Ping
packets to test if a computer is on the Internet.
Enter the host name or IP/IPv6 address that you
wish to Ping, and click Ping.
The results of your ping attempts will be displayed
here.
44D-Link DAP-1522 User Manual
Section 3 - Conguration
Schedule
Name:
Days:
Time:
Schedule Rules
List:
Enter a name for your new schedule.
Select a day, a range of days, or All Week to include
every day.
Enter a start and end time for your schedule.
The list of schedules will be listed here. Click the
Edit icon to make changes or click the Delete icon
to remove the schedule.
45D-Link DAP-1522 User Manual
Section 3 - Conguration
Status
Device Info
This page displays the current information for the DAP-1522. It will display the LAN and wireless LAN information.
General:
LAN:
Wireless LAN:
Displays the access point’s time and firmware
version.
Displays the MAC address and the private (local) IP
settings for the access point.
Displays the wireless MAC address and your
wireless settings such as SSID and Channel.
46D-Link DAP-1522 User Manual
Section 3 - Conguration
Wireless
The wireless section allows you to view the wireless clients that are connected to your wireless access point.
SSID:
MAC Address:
UpTime:
Mode:
Signal:
Displays the name of your network.
The Ethernet ID (MAC address) of the wireless client.
Displays the amount of time the wireless client has
been connected to the access point.
The transmission standard being used by the client.
Values are 11a, 11b, 11g, 11ng or 11na for 802.11a,
802.11b, 802.11g or 802.11n respectively.
This is a relative measure of signal quality. The value
is expressed as a percentage of theoretical best
quality. Signal quality can be reduced by distance,
by interference from other radio frequency sources
(such as cordless telephones or neighboring
wireless networks), and by obstacles between the
access point and the wireless device.
47D-Link DAP-1522 User Manual
Section 3 - Conguration
Logs
The access point automatically logs (records) events of possible interest in its internal memory. If there isn’t enough internal
memory for all events, logs of older events are deleted, but logs of the latest events are retained. The Logs option allows you
to view the access point logs.
Log Type:
First Page:
Last Page:
Previous:
Next:
Clear:
Save Log:
Refresh:
There are two types of logs that can be viewed: System
Activity,DebugSystem,Attacks,DroppedPackets
and Notice.
Click to view the rst page.
Click to view the last page.
Click to view the previous page.
Click to view the next page.
Delete all of the log content.
Click the Save button to save the access point log le
to your computer.
Click to refresh the information on this page.
48D-Link DAP-1522 User Manual
Section 3 - Conguration
Statistics
The Statistics page displays all of the LAN and Wireless packets transmit and receive statistics.
TX Packets:
RX Packets:
TX Packets
Dropped:
RX Packets
Dropped:
TX Bytes:
RX Bytes:
The total number of packets sent from the access point.
The total number of packets received by the access
point.
Displays the number of packets that were dropped
while sending, due to errors, collisions, or access point
resource limitations.
Displays the number of packets that were dropped
while receiving, due to errors, collisions, or access point
resource limitations.
Displays the number of bytes that were sent from the
access point.
Displays the number of bytes that were received by
the access point.
49D-Link DAP-1522 User Manual
Section 3 - Conguration
This page will display all your network connection details.
IPv6
IPv6 Connection Type:
LAN IPv6 Address:
IPv6 Default Gateway:
LAN IPv6 Link-Local
Address:
Primary DNS Server:
Secondary DNS Server:
Displays IPv6 connection mode.
Displays LAN IPv6 address.
Displays the IPv6 address of the default
gateway.
Displays the LAN IPv6 link-local address.
Displays the IPv6 address of the primary
DNS server.
Displays the IPv6 address of the secondary
DNS server.
50D-Link DAP-1522 User Manual
Section 3 - Conguration
Help
51D-Link DAP-1522 User Manual
Section 3 - Conguration
Conguration for Bridge Mode
This section will show you how to congure your new D-Link wireless MediaBridge using the web-based conguration utility.
Web-based Conguration Utility
To access the conguration utility, open a web-browser
such as Internet Explorer and enter dlinkap or enter
192.168.0.50 in the address eld.
Select Admin from the drop-down menu and then enter
your password. Leave the password blank by default.
If you get a Page Cannot be Displayed error, please refer to
the Troubleshooting section for assistance.
52D-Link DAP-1522 User Manual
Section 3 - Conguration
Setup Wizard
This wizard is designed to assist you in conguring the wireless settings for your bridge. It will guide you through
step-by-step instructions on how to setup your wireless network.
Click LaunchWirelessSetupWizard
Click Next to continue with the wizard setup.
53D-Link DAP-1522 User Manual
Section 3 - Conguration
Select WPS configuration if you want to use Wi-Fi
Protected Setup.
If you want to set up your network manually, skip to page
55.
Click Next to continue.
Click Connect to continue.
54D-Link DAP-1522 User Manual
Section 3 - Conguration
Press down the WPS Button on the wireless device you
are adding to your network to complete the setup.
Select Manual conguration to set up your network
manually.
Click Next to continue.
55D-Link DAP-1522 User Manual
Section 3 - Conguration
Enter the WirelessNetworkName of the AP or click the
Site Survey button to nd the AP.
Click Next to continue on to page 57.
56D-Link DAP-1522 User Manual
Section 3 - Conguration
If you clicked on Site Survey, the following screen will
be displayed.
Find your access point from the list and click Connect to
complete the Setup Wizard.
Choose which Security Mode you want to use and click
Next to continue.
57D-Link DAP-1522 User Manual
Section 3 - Conguration
If you choose WEP, enter the wireless security password
and click Next to complete the Setup Wizard.
Select Auto (WPA or WPA2) and click Next to continue.
Enter the WPA/WPA2 Personal Passphrase and click
Next to establish wireless connection.
58D-Link DAP-1522 User Manual
Section 3 - Conguration
The following screen opens to indicate that you have
successfully saved your new settings.
59D-Link DAP-1522 User Manual
Section 3 - Conguration
Wireless
Site Survey:
Enable Wireless:
Wireless
Network
Name:
Band Width:
Security Mode:
Enable:
A function that looks for available wireless networks.
Click the check box to enable the wireless function. If
you do not want to use wireless, uncheck the box to
disable all the wireless functions.
Service Set Identier (SSID) is the name of your wireless
network. Create a name using up to 32 characters. The
SSID is case sensitive.
Select the Band Width:
Auto 20/40 - Select if you are using both 802.11n and
non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n
wireless clients.
Refer to page 77 for more information regarding
wireless security.
Enable the Wi-Fi Protected Setup feature.
Wireless MAC
Cloning:
MAC Address:
Scan:
Enabling this option allows the user to manually
as sig n th e so urce MAC a ddr ess to pa ck ets
forwarded by the bridge. If not manually assigned,
the packet’s source MAC address field will be
automatically selected as the bridge’s MAC address.
Enter the desired MAC address connected to your
bridge to enable the clone function.
Click the Scan button to search for all available devices
connected to your DAP-1522’s Ethernet ports
60D-Link DAP-1522 User Manual
Section 3 - Conguration
LAN Settings
Static
This section will allow you to change the local network settings of the bridge and to congure the Static settings.
Device Name:
LAN
Connection
Type:
IPv4 Address:
Subnet Mask:
Default
Gateway:
Enter the Device Name of the AP and click Next to
continue. It is recommended to change the Device
Name if there is more than one D-Link device within
the subnet.
Use the drop-down menu to select Static IP if your ISP
assigned you the IP address, subnet mask, gateway,
and DNS server addresses. Select DynamicIP(DHCP)
to automatically assign an IP address to the computers
on the LAN/private network.
Enter the IPv4 address assigned by your ISP.
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
Primary DNS
Server:
Secondary
DNS
Server:
My IPv6
Connection:
Enter the primary DNS server IP address.
Enter the secondary DNS server IP address.
Select the mode you would like the router to use to
connect to the IPv6 Internet from the drop-down menu.
61D-Link DAP-1522 User Manual
Section 3 - Conguration
Dynamic
LAN Connection
Type:
Select DHCP to automatically obtain an IP address
on the LAN/private network.
62D-Link DAP-1522 User Manual
Section 3 - Conguration
Advanced
Advanced Network Settings
This section allows uses to change the LAN Settings. We do not recommend changing these settings from factory default.
63D-Link DAP-1522 User Manual
Section 3 - Conguration
Maintenance
Admin
This page will allow you to change the Administrator password. Admin has read/write access.
Password:
Verify
Password:
Enter a new password for the Administrator Login
Name. The administrator can make changes to the
settings.
Enter the same password that you entered in the
previous textbox in order to conrm its accuracy.
64D-Link DAP-1522 User Manual
Section 3 - Conguration
Time
The Time Conguration option allows you to congure, update, and maintain the correct time on the internal system clock.
From this section you can set the time zone that you are in. Daylight Saving can also be congured to automatically adjust the
time when needed.
Time Zone:
Enable Daylight
Saving:
Automatically
synchronize
with D-Link’s
Internet time
server:
NTP Server Used:
Manual:
Select the Time Zone from the drop-down menu.
To select Daylight Saving time manually, tick the
Enable Daylight Saving check box. Next use the drop
down menu to select a Daylight Saving Oset and
then enter a start date and an end date for daylight
saving time.
Click the chec k box to enabl e the devi ce to
automatically synchronize with a D-Link NTP
Server. NTP stands for Network Time Protocol. NTP
synchronizes computer clock times in a network
of computers. This will only connect to a server on
the Internet, not a local server.
Enter the NTP server or select one from the drop
down menu.
To manually input the time, enter the values in these
elds for the Year, Month, Day, Hour, Minute, and
Second and then click Save Settings. You can also
click the CopyYour Computer’sTime Settings
button at the bottom of the screen.
65D-Link DAP-1522 User Manual
Section 3 - Conguration
System
Save Settings To Local
Hard Drive:
Load From Local Hard
Drive:
Restore To Factory
Default:
Use this option to save the current access point
conguration settings to a le on the hard disk
of the computer you are using. First, click the
Save button. You will then see a le dialog, where
you can select a location and le name for the
settings.
Use this option to load previously saved access
point configuration settings. First, use the
Browse control to nd a previously save le of
configuration settings. Then, click the Load
button to transfer those settings to the access
point.
This option will restore all conguration settings
back to the settings that were in eect at the
time the access point was shipped from the
factory. Any settings that have not been saved
will be lost, including any rules that you have
created. If you want to save the current access
point conguration settings, use the Save button
above.
Reboot The Device:
Clear Language Pack:
Click to reboot the bridge.
Click to clear the language pack. This will put the web UI back to English.
66D-Link DAP-1522 User Manual
Section 3 - Conguration
Firmware
You can upgrade the rmware of the access point here. Make sure the rmware you want to use is on the local hard drive
of the computer. Click on Browse to locate the rmware le to be used for the update. Please check the D-Link support site
for rmware updates at http://support.dlink.com. You can download rmware upgrades to your hard drive from the D-Link
support site.
Browse:
Upload:
After you have downloaded the new rmware,
click Browse to locate the rmware update on your
hard drive. Click Upload to complete the rmware
upgrade.
Once you have a firmware update on your
computer, use this option to browse for the le
and then upload the information into the bridge.
Language Pack
You can change the language of the web UI by uploading
available language packs.
Browse:
After you have downloaded the new language
pack, click Browse to locate the language pack le
on your hard drive. Click Upload to complete the
language pack upgrade.
67D-Link DAP-1522 User Manual
Section 3 - Conguration
If you load a language pack and would like to go back to English, click Maintenance > System and click on Clear next to Clear
Language Pack.
68D-Link DAP-1522 User Manual
Section 3 - Conguration
Schedule
Name:
Days:
Time:
Wireless:
Add:
Schedule Rules
List:
Enter a name for your new schedule.
Select a day, a range of days, or All Week to include
every day.
Check All Days or enter a start and end time for your
schedule.
Select On or O from the drop-down menu.
Click Add to save your schedule. You must click
Save Settings at the top for your schedules to go
into eect.
The list of schedules will be listed here. Click the
Edit icon to make changes or click the Delete icon
to remove the schedule.
69D-Link DAP-1522 User Manual
Section 3 - Conguration
Status
Device Info
This page displays the current information for the DAP-1522. It will display the LAN and wireless LAN information.
General:
LAN:
Wireless LAN:
Displays the access point’s time and rmware version.
Displays the MAC address and the private (local) IP
settings for the access point.
Displays the wireless MAC address and your wireless
settings such as SSID and Channel.
70D-Link DAP-1522 User Manual
Section 3 - Conguration
Logs
The access point automatically logs (records) events of possible interest in its internal memory. If there isn’t enough internal
memory for all events, logs of older events are deleted, but logs of the latest events are retained. The Logs option allows you
to view the access point logs. You can dene what types of events you want to view and the level of the events to view. This
access point also has external Syslog Server support so you can send the log les to a computer on your network that is running
a Syslog utility.
What to View:
Apply Log
Settings Now:
Refresh:
Clear:
Save Log:
There are ve types of logs that can be viewed: System
Activity, Wireless Activity, Attacks, Dropped Packets,
and Notice. Click on the corresponding check box for
the type(s) that you want displayed in the log.
Click this button to immediately lter the log results
so that only the selected options appear in the Log
Details section of this screen.
Updates the log details on the screen so it displays any
recent activity.
This option clears all of the log contents.
This option will save the access point to a log le on
your computer.
71D-Link DAP-1522 User Manual
Section 3 - Conguration
Statistics
The Statistics page displays all of the LAN and Wireless packets transmit and receive statistics.
TX Packets:
RX Packets:
TX Packets
Dropped:
RX Packets
Dropped:
TX Bytes:
RX Bytes:
The total number of packets sent from the access point.
The total number of packets received by the access
point.
Displays the number of packets that were dropped
while sending, due to errors, collisions, or access point
resource limitations.
Displays the number of packets that were dropped
while receiving, due to errors, collisions, or access point
resource limitations.
Displays the number of bytes that were sent from the
access point.
Displays the number of bytes that were received by
the access point.
72D-Link DAP-1522 User Manual
Section 3 - Conguration
Help
73D-Link DAP-1522 User Manual
Section 4 - Security
Wireless Security
This section will show you the dierent levels of security you can use to protect your data from intruders. The DAP-1522 oers
the following types of security:
• WPA2 (Wi-Fi Protected Access 2) • WPA2-PSK (Pre-Shared Key)
• WPA (Wi-Fi Protected Access) • WPA-PSK (Pre-Shared Key)
What is WPA?
WPA, or Wi-Fi Protected Access, is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent
Privacy).
The 2 major improvements over WEP:
• Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a
hashing algorithm and, by adding an integrity-checking feature, ensures that the keys haven’t been tampered
with. WPA2 is based on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP.
• User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP).
WEP regulates access to a wireless network based on a computer’s hardware-specic MAC address, which is
relatively simple to be snied out and stolen. EAP is built on a more secure public-key encryption system to
ensure that only authorized network users can access the network.
WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password
between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key
entered on your wireless bridge or access point.
WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more
secure public key encryption system to ensure that only authorized network users can access the network.
74D-Link DAP-1522 User Manual
Section 4 - Security
Congure WPA/WPA2
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based conguration by opening a web browser
and entering the IP address of the access point (192.168.0.50). Click
on Setup and then click Wireless Settings on the left side.
2. Next to Security Mode section, select Enable WPA Wireless
Security(enhanced) from the drop-down menu.
3. Next to Cipher Type, select TKIP, AES, or Auto(TKIP/AES).
4. Next to PSK/EAP, select either PSK or EAP.
5. Next to Network Key, enter a key. The key is entered as a passphrase
in ASCII format at both ends of the wireless connection. The
passphrase must be between 8-63 characters.
6. Click Save Settings at the top of the window to save your settings.
If you are conguring the access point with a wireless adapter, you
will lose connectivity until you enable WPA-PSK on your adapter
and enter the same passphrase as you did on the access point.
75D-Link DAP-1522 User Manual
Section 5 - Connecting to a Wireless Network
Connect to a Wireless Network
Using Windows® 7
It is recommended to enable wireless security (WPA/WPA2) on your access point before conguring your wireless adapter. If
you are joining an existing network, you will need to know the security key or passphrase being used.
1. Click on the wireless icon in your system tray (lower-right corner).
2. The utility will display any available wireless networks in your area.
Wireless Icon
76D-Link DAP-1522 User Manual
Section 5 - Connecting to a Wireless Network
3. Highlight the wireless network (SSID) you would like to connect
to and click the Connect button.
If you get a good signal but cannot access the Internet, check your
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.
4. The following window appears while your computer tries to
connect to the router.
77D-Link DAP-1522 User Manual
Section 5 - Connecting to a Wireless Network
5. Enter the same security key or passphrase that is on your access
point and click Connect. You can also connect by pushing the
WPS button on the router.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the security settings are correct.
The key or passphrase must be exactly the same as on the wireless
router.
78D-Link DAP-1522 User Manual
Section 5 - Connecting to a Wireless Network
Connect to a Wireless Network
Using Windows Vista®
Windows Vista® users may use the convenient, built-in wireless utility. Follow these instructions:
From the Start menu, go to Control Panel, and then click on
Network and Sharing Center.
The utility will display any available wireless networks in your
area. Click on a network (displayed using the SSID) under Select a
network to connect to and then click the Connect button.
79D-Link DAP-1522 User Manual
Section 5 - Connecting to a Wireless Network
Click Connect Anyway to continue.
The utility will display the following window to indicate a
connection is being made.
The nal window indicates the establishment of a successful
connection.
The next two pages display the windows used to connect to either
a WEP or a WPA-PSK wireless network.
80D-Link DAP-1522 User Manual
Section 5 - Connecting to a Wireless Network
Congure Security
It is recommended to enable wireless encryption on your wireless bridge or access point before conguring your wireless
adapter. If you are joining an existing network, you will need to know the security key being used.
Select a network to connect to and then click the Connect button.
Enter the appropriate security key or passphrase in the field
provided and then click the Connect button.
81D-Link DAP-1522 User Manual
Section 5 - Connecting to a Wireless Network
Connect to a Wireless Network
Using Windows® XP
Windows XP users may use the built-in wireless utility (Zero Conguration Utility). The following instructions are for Service
Pack 2 users. If you are using another company’s utility or Windows 2000, please refer to the user manual of your wireless
adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows
XP utility as seen below.
If you receive the Wireless Networks Detected bubble, click on the
center of the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray (lower-right
corner next to the time). Select View Available Wireless Networks.
The utility will display any available wireless networks in your area.
Click on a network (displayed using the SSID) and click the Connect
button.
If you get a good signal, but cannot access the Internet, check you
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.
82D-Link DAP-1522 User Manual
Section 5 - Connecting to a Wireless Network
Congure Security
It is recommended to enable wireless security on your wireless bridge or access point before conguring your wireless adapter.
If you are joining an existing network, you will need to know the security key being used.
1. Open the Windows® XP Wireless Utility by right-clicking
on the wireless computer icon in your system tray
(lower-right corner of screen). Select View Available Wireless
Networks.
2. Highlight the wireless network (SSID) you would like to connect
to and click Connect.
83D-Link DAP-1522 User Manual
Section 5 - Connecting to a Wireless Network
3. The Wireless Network Connection box will appear. Enter the security
passphrase and click Connect.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the security settings are correct. The
WPA-PSK passphrase must be exactly the same as on the wireless access
point.
84D-Link DAP-1522 User Manual
Section 6 - Troubleshooting
Troubleshooting
This chapter provides solutions to problems that can occur during the installation and operation of the DAP-1522. Read the
following descriptions if you are having problems. (The examples below are illustrated in Windows® XP. If you have a dierent
operating system, the screenshots on your computer will look similar to the following examples.)
1.Whycan’tIaccesstheweb-basedcongurationutility?
When entering the IP address of the D-Link access point (192.168.0.50 for example), you are not connecting to a website on
the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your
computer must be on the same IP subnet to connect to the web-based utility.
• Make sure you have an updated Java-enabled web browser. We recommend the following:
- Microsoft Internet Explorer 6.0 and higher
- Mozilla Firefox 3.0 and higher
- Google Chrome 2.0 and higher
- Apple Safari 3.0 and higher
• Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a dierent
cable or connect to a dierent port on the device if possible. If the computer is turned o, the link light may not be on.
• Disable any internet security software running on the computer. Software rewalls such as Zone Alarm, Black Ice, Sygate,
Norton Personal Firewall, and Windows® XP rewall may block access to the conguration pages. Check the help les included
with your rewall software for more information on disabling or conguring it.
85D-Link DAP-1522 User Manual
Section 6 - Troubleshooting
• Congure your Internet settings:
• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click
the button to restore the settings to their defaults.
• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button.
Make sure nothing is checked. Click OK.
• Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.
• Close your web browser (if open) and open it.
• Access the web management. Open your web browser and enter the IP address of your D-Link access point in the address
bar. This should open the login page for your the web management.
• If you still cannot access the conguration, unplug the power to the access point for 10 seconds and plug back in. Wait about
30 seconds and try accessing the conguration. If you have multiple computers, try connecting using a dierent computer.
2.WhatcanIdoifIforgotmypassword?
If you forgot your password, you must reset your access point. Unfortunately this process will change all your settings back to
the factory defaults.
To reset the access point, locate the reset button (hole) on the rear panel of the unit. With the access point powered on, use a
paperclip to hold the button down for 10 seconds. Release the button and the access point will go through its reboot process.
Wait about 30 seconds to access the access point. The default IP address is 192.168.0.50. When logging in, the username is
admin and leave the password box empty.
86D-Link DAP-1522 User Manual
Appendix A - Wireless Basics
Wireless Basics
D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless
connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link
wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able
to enjoy the freedom that wireless networking delivers.
A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of
wires. Wireless LANs are used increasingly in both home and oce environments, and public areas such as airports, coee shops
and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more eciently.
Increased mobility and the absence of cabling and other xed infrastructure have proven to be benecial for many users.
Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop
systems support the same protocols as Ethernet adapter cards.
Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order
to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Access point is a device used to
provide this link.
87D-Link DAP-1522 User Manual
Appendix A - Wireless Basics
WhatisWireless?
Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio
frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or oce.
D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link
delivers the performance you need at a price you can aord. D-Link has all the products you need to build your network.
Howdoeswirelesswork?
Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B. But
wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area
to be able to connect your computer. There are two dierent types of wireless networks Wireless Local Area Network (WLAN),
and Wireless Personal Area Network (WPAN).
WirelessLocalAreaNetwork(WLAN)
In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has
a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point
as seen in the picture, the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles
to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and
many other outdoor venues.
88D-Link DAP-1522 User Manual
Appendix A - Wireless Basics
WirelessPersonalAreaNetwork(WPAN)
Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to
30 feet away.
Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as
much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other
devices that operate on batteries.
Whouseswireless?
Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, oce, business,
D-Link has a wireless solution for it.
Home
• Gives everyone at home broadband access
• Surf the web, check email, instant message, etc.
• Gets rid of the cables around the house
• Simple and easy to use
SmallOceandHomeOce
• Stay on top of everything at home as you would at oce
• Remotely access your oce network from home
• Share Internet connection and printer with multiple computers
• No need to dedicate oce space
89D-Link DAP-1522 User Manual
Appendix A - Wireless Basics
Whereiswirelessused?
Wireless technology is expanding everywhere not just at home or oce. People like the freedom of mobility and it’s becoming
so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public
places is usually called “hotspots”.
Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations
like: Airports, Hotels, Coee Shops, Libraries, Restaurants, and Convention Centers.
Wireless network is easy to setup, but if you’re installing it for the rst time it could be quite a task not knowing where to start.
That’s why we’ve put together a few setup steps and tips to help you through the process of setting up a wireless network.
Tips
Here are a few things to keep in mind, when you install a wireless network.
CentralizeyouraccesspointorAccessPoint
Make sure you place the bridge/access point in a centralized location within your network for the best performance. Try to
place the bridge/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have
a two-story home, you may need a repeater to boost the signal to extend the range.
EliminateInterference
Place home appliances such as cordless telephones, microwaves, wireless speakers, and televisions as far away as possible from
the bridge/access point. This would signicantly reduce any interference that the appliances might cause since they operate
on same frequency.
90D-Link DAP-1522 User Manual
Appendix A - Wireless Basics
Security
Don’t let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning
on the WPA or WEP security feature on the access point. Refer to product manual for detail information on how to set it up.
There are basically two modes of networking:
•Infrastructure–All wireless clients will connect to an access point or wireless bridge.
•Ad-Hoc– Directly connecting to another computer, for peer-to-peer communication, using wireless network
adapters on each computer, such as two or more wireless network Cardbus adapters.
An Infrastructure network contains an Access Point or wireless bridge. All the wireless devices, or clients, will connect to the
wireless bridge or access point.
An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc
mode to communicate.
Wireless Modes
91D-Link DAP-1522 User Manual
Appendix B - Networking Basics
Networking Basics
Check your IP address
After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP
server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
Click on Start > Run. In the run box type cmd and click OK. (Windows® 7/Vista® users type cmd in the Start Search box.)
At the prompt, type ipcong and press Enter.
This will display the IP address, subnet mask, and the
default gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation,
security settings, and the settings on your access point.
Some rewall software programs may block a DHCP
request on newly installed adapters.
If you are connecting to a wireless network at a hotspot
(e.g. hotel, coffee shop, airport), please contact an
employee or administrator to verify their wireless
network settings.
92D-Link DAP-1522 User Manual
Appendix B - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1
Windows® 7 - Click on Start > Control Panel > Network and Internet > Network and Sharing Center.
Windows Vista® - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network
Connections.
Windows® XP - Click on Start > Control Panel > Network Connections.
Windows® 2000 - From the desktop, right-click My Network Places > Properties.
Step 2
Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties.
Step 3
Highlight InternetProtocol(TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet
as your network or the LAN IP address on your router.
Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X
where X is a number between 2 and 99. Make sure that the number you choose is not in
use on the network. Set Default Gateway the same as the LAN IP address of your router
(192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The
Secondary DNS is not needed or you may enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.
93D-Link DAP-1522 User Manual
Appendix C - Technical Specications
Technical Specications
Standards
• IEEE 802.11n
• IEEE 802.11a
• IEEE 802.11g
• IEEE 802.3
• IEEE 802.3u
Security
• WPA-Personal
• WPA2-Personal
• WPA-Enterprise
• WPA2-Enterprise
Wireless Signal Rates
1
• 300Mbps • 108Mbps
• 54Mbps • 48Mbps
• 36Mbps • 24Mbps
• 18Mbps • 12Mbps
• 11Mbps • 9Mbps
• 6Mbps • 5.5Mbps
• 2Mbps • 1Mbps
Modulation
• 11b: DQPSK, DBPSK and CCK
• 11a/g: BPSK, QPSK, 16QAM, 64QAM, OFDM
• 11n: BPSK, QPSK, 16QAM, 64QAM, OFDM, MCS
Frequency Range
• 2.4GHz to 2.483GHz • 5.15GHz~5.825GHz
2
3
LEDs
• Power • Bridge
• AP
OperatingTemperature
• 32°F to 104°F ( 0°C to 40°C)
Humidity
• 90% maximum (non-condensing)
Safety&Emissions
• FCC
• IC
• CSA
MaximumOperatingVoltage
• 5V
Dimensions
• L = 5.75 inches
MaximumOperatingCurrent
• 725 mA
1
Maximum wireless signal rate derived from IEEE Standard 802.11g, 802.11a and 802.11n specications. Actual data throughput will vary. Network conditions and environmental
factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will
adversely aect wireless signal range.
2
Range varies depending on country’s regulation.
3
The DAP-1522 doesn’t include 5.25-5.35GHz & 5.47~5.725GHz.
• W = 4.5 inches
• H = 1.25 inches
94D-Link DAP-1522 User Manual
Appendix D - Contacting Technical Support
Contacting Technical Support
U.S. and Canadian customers can contact D-Link technical support through our web site or by phone.
Before you contact technical support, please have the following ready:
• Model number of the product (e.g. DAP-1522)
• Hardware Revision (located on the label on the bottom of the access point (e.g. rev A1))
• Serial Number (s/n number located on the label on the bottom of the access point).
You can nd software updates and user documentation on the D-Link website as well as frequently asked questions and
answers to technical issues.
ForcustomerswithintheUnitedStates:
Phone Support:
(877) 453-5465
Internet Support:
http://support.dlink.com
ForcustomerswithinCanada:
Phone Support:
(800) 361-5265
Internet Support:
http://support.dlink.ca
95D-Link DAP-1522 User Manual
Appendix E - Warranty
Warranty
Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty:
• Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and
• Only for products purchased and delivered within the fty states of the United States, the District of Columbia, U.S. Possessions
or Protectorates, U.S. Military Installations, or addresses with an APO or FPO.
LimitedWarranty:
D-Link warrants that the hardware portion of the D-Link product described below (“Hardware”) will be free from material defects in workmanship
and materials under normal use from the date of original retail purchase of the product, for the period set forth below (“Warranty Period”), except
as otherwise stated herein.
• Hardware (excluding power supplies and fans): One (1) year
• Power supplies and fans: One (1) year
• Spare parts and spare kits: Ninety (90) days
The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at
D-Link’s option, to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund the actual
purchase price paid. Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Oce. The replacement hardware
need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any
reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.
Repaired or replacement hardware will be warranted for the remainder of the original Warranty Period or ninety (90) days, whichever is longer,
and is subject to the same limitations and exclusions. If a material defect is incapable of correction, or if D-Link determines that it is not practical
to repair or replace the defective Hardware, the actual price paid by the original purchaser for the defective Hardware will be refunded by D-Link
upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded,
shall become the property of D-Link upon replacement or refund.
96D-Link DAP-1522 User Manual
Appendix E - Warranty
LimitedSoftwareWarranty:
D-Link warrants that the software portion of the product (“Software”) will substantially conform to D-Link’s then current functional specications
for the Software, as set forth in the applicable documentation, from the date of original retail purchase of the Software for a period of ninety (90)
days (“Software Warranty Period”), provided that the Software is properly installed on approved hardware and operated as contemplated in its
documentation. D-Link further warrants that, during the Software Warranty Period, the magnetic media on which D-Link delivers the Software will
be free of physical defects. The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty
will be, at D-Link’s option, to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Link’s
functional specications for the Software or to refund the portion of the actual purchase price paid that is attributable to the Software. Except as
otherwise agreed by DLink in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions
of the license granted by D-Link for the Software. Replacement Software will be warranted for the remainder of the original Warranty Period and is
subject to the same limitations and exclusions. If a material non-conformance is incapable of correction, or if D-Link determines in its sole discretion
that it is not practical to replace the non-conforming Software, the price paid by the original licensee for the non-conforming Software will be
refunded by D-Link; provided that the non-conforming Software (and all copies thereof) is rst returned to D-Link. The license granted respecting
any Software for which a refund is given automatically terminates.
Non-ApplicabilityofWarranty:
The Limited Warranty provided hereunder for Hardware and Software portions of D-Link’s products will not be applied to and does not cover any
refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D-Link, the sellers, or
the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case, the product is being sold “As-Is” without any
warranty whatsoever including, without limitation, the Limited Warranty as described herein, notwithstanding anything stated herein to the contrary.
SubmittingAClaim:
The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired and the
product is within warranty, the customer shall submit a claim to D-Link as outlined below:
• The customer must submit with the product as part of the claim a written description of the Hardware defect or Software
nonconformance in sucient detail to allow DLink to conrm the same, along with proof of purchase of the product (such as a
copy of the dated purchase invoice for the product) if the product is not registered.
• The customer must obtain a Case ID Number from D-Link Technical Support at 1-877-453-5465, who will attempt to assist the
customer in resolving any suspected defects with the product. If the product is considered defective, the customer must obtain a
Return Material Authorization (“RMA”) number by completing the RMA form and entering the assigned Case ID Number at https://
rma.dlink.com/.
97D-Link DAP-1522 User Manual
Appendix E - Warranty
• After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package
to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package.
Do not include any manuals or accessories in the shipping package. DLink will only replace the defective portion of the product
and will not ship back any accessories.
• The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products sent COD
will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer and shipped
to D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that
are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common
carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an address in the United States, otherwise
we will ship the product to you freight collect. Expedited shipping is available upon request and provided shipping charges are
prepaid by the customer. D-Link may reject or return any product that is not packaged and shipped in strict compliance with the
foregoing requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to
pay D-Link’s reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance
with the foregoing requirements, or that is determined by D-Link not to be defective or non-conforming.
What Is Not Covered:
The Limited Warranty provided herein by D-Link does not cover:
Products that, in D-Link’s judgment, have been subjected to abuse, accident, alteration, modication, tampering, negligence, misuse, faulty installation,
lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number
has been altered, tampered with, defaced or removed; Initial installation, installation and removal of the product for repair, and shipping costs;
Operational adjustments covered in the operating manual for the product, and normal maintenance; Damage that occurs in shipment, due to act
of God, failures due to power surge, and cosmetic damage; Any hardware, software, rmware or other products or services provided by anyone
other than D-Link; and Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link, the sellers,
or the liquidators expressly disclaim their warranty obligation pertaining to the product.
While necessary maintenance or repairs on your Product can be performed by any company, we recommend that you use only an Authorized D-Link
Service Oce. Improper or incorrectly performed maintenance or repair voids this Limited Warranty.
DisclaimerofOtherWarranties:
EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER
INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY
SHALL BE LIMITED TO THE DURATION OF THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. EXCEPT AS EXPRESSLY COVERED UNDER THE
LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE
PURCHASER OF THE PRODUCT.
98D-Link DAP-1522 User Manual
Appendix E - Warranty
LimitationofLiability:
TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL
OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK
STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINK’S PRODUCT
IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK
FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF
THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF
THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NONCONFORMING PRODUCT. THE MAXIMUM
LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING
EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED
OR STATUTORY.
Governing Law:
This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This
Limited Warranty provides specic legal rights and you may also have other rights which vary from state to state.
Trademarks:
D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their
respective owners.
CopyrightStatement:
No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make any
derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the
United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice.
Copyright ©2009-2011 by D-Link Corporation/D-Link Systems, Inc. All rights reserved.
CE Mark Warning:
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take
adequate measures.
99D-Link DAP-1522 User Manual
Appendix E - Warranty
FederalCommunicationCommissionInterferenceStatement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by
one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to
operate this equipment.
For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment.
IEEE 802.11b or 802.11g operation of this product in the U.S.A. is rmware-limited to channels 1 through 11.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
100D-Link DAP-1522 User Manual
Loading...