D-Link DAP-1160 User Manual

Version 2.0 | 12/09/2013

User Manual

Wireless N 150 Bridge/Access Point

DAP-1160

Table of Contents

Table of Contents

Package Contents.........................................................................	4
System Requirements..................................................................	5
Introduction....................................................................................	6
Features............................................................................................	8
Hardware Overview......................................................................	9
Connections............................................................................	9
LEDs..........................................................................................	10
Installation........................................................................	11
Operation Modes........................................................................	11
Access Point Mode..............................................................	12
Wireless Client Mode.........................................................	13
Wireless Installation Considerations....................................	14
Configuration...................................................................	15
Web-based Configuration Utility...........................................	15
Wireless Setup Wizard...............................................................	16
Access Point Mode..............................................................	17
Wireless Client Mode.........................................................	19
Manual Configuration...............................................................	21
Wireless Settings..................................................................	21
Access Point Mode.........................................................	22
Wireless Client Mode.....................................................	24
LAN Settings..........................................................................	25
Static IP...............................................................................	26
DHCP Server.....................................................................	27
Advanced.......................................................................................	28
Advanced Wireless..............................................................	28

MAC Address Filter......................................................................	29
Wi-Fi Protected Setup................................................................	30
User Limits.....................................................................................	31
Maintenance.................................................................................	32
Admin......................................................................................	32
System.....................................................................................	33
Language Pack.....................................................................	34
Firmware.................................................................................	34
Time..........................................................................................	35
System Check........................................................................	36
Schedules...............................................................................	37
Status...............................................................................................	38
Device Info.............................................................................	38
Logs..........................................................................................	39
Statistics..................................................................................	40
Wireless...................................................................................	41
Help..................................................................................................	42
Wireless Security..............................................................	43
What is WPA?.................................................................................	44
Configure WPA/WPA2 Personal..............................................	45
Configure WPA/WPA2 Enterprise...........................................	46
Connect to a Wireless Network.......................................	47
Using Windows® XP.....................................................................	47
Configure WPA-PSK....................................................................	48
Using Windows Vista® ................................................................	50
Configure WPA-PSK....................................................................	52

D-Link DAP-1160 User Manual

2

Table of Contents
Using Windows® 7........................................................................	53
Configure WPS......................................................................	56
Troubleshooting...............................................................	60
Wireless Basics..................................................................	64
What is Wireless?.........................................................................	65
Tips...................................................................................................	67
Wireless Modes............................................................................	68
Networking Basics............................................................	69
Check your IP address................................................................	69
Statically Assign an IP address................................................	70
Technical Specifications...................................................	71

D-Link DAP-1160 User Manual

3

Section 1 - Product Overview

Package Contents

DAP-1160 Wireless N 150 Bridge/Access Point

Ethernet Cable

Power Adapter

Note: Using a power supply with a different voltage rating than the one included with the DAP-1160 will cause damage and void the warranty for this product.

D-Link DAP-1160 User Manual

4

Section 1 - Product Overview

System Requirements

		• An Ethernet-based Network
	Network Requirements	• IEEE 802.11n/g wireless clients (AP)
		• IEEE 802.11n/g wireless network (Client Mode)
		• 10/100 Ethernet
		Computer with the following:
		• Windows®, Macintosh, or Linux-based operating system
		• An installed Ethernet adapter
		Browser Requirements:
	Web-based Configuration	• Internet Explorer 8 or later
	Utility Requirements	• Firefox 12.0 or later
		• Safari 4 or later
		• Google Chrome 20.0 or later
		Windows® Users: Make sure you have the latest version of Java installed.
		Visit www.java.com to download the latest version.

D-Link DAP-1160 User Manual

5

Section 1 - Product Overview

Introduction

D-Link, an industry leader in networking, introduces the new D-Link DAP-1160 Wireless N 150 Bridge/Access Point. With the ability to transfer files with a maximum wireless signal rate of up to 150Mbps*, the DAP-1160 gives you faster wireless network access for your home or office.

The DAP-1160 can connect and interoperate with other 802.11n compatible wireless client devices. The DAP-1160 is also backwards compatible with 802.11b/g. It can be flexibly configured to operate in 2 different modes Access Point, Wireless Client. With its Setup Wizard, the DAP-1160 ensures that you will be up and running on a wireless network in just a matter of minutes.

The DAP-1160 features Wi-Fi Protected Access (WPA-PSK/WPA2-PSK) to provide an enhanced level of security for wireless data communications. The DAP-1160 also includes additional security features to keep your wireless connection safe from unauthorized access.

The DAP-1160 supports WPS on the AP, and wireless client operation modes,with each capable of being conveniently set up by using the PIN method or Push Button.

• Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.

D-Link DAP-1160 User Manual

6

Section 1 - Product Overview

TOTAL PERFORMANCE

Combines award winning access point features and Wireless N 150 technology to provide the best wireless performance.

TOTAL SECURITY

The most complete set of security features including WPA/WPA2 encryption to protect your network against outside intruders.

Connect home and soho to a wireless network

Create a wireless network for your home and office using the D-Link DAP-1160 as an 802.11n standard Wireless Access Point. Connect this Access Point to a broadband modem and let others wirelessly access your Internet connection. Enjoy surfing the web, checking e-mail, and chatting with family and friends online.

TOTAL NETWORK SECURITY

The DAP-1160 supports all of the latest wireless security features to prevent unauthorized access, be it from over the wireless network or from the Internet. Support for WPA and WPA2 standards ensure that you’ll be able to use the best possible encryption method, regardless of your client devices.

* Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range.

D-Link DAP-1160 User Manual

7

Section 1 - Product Overview

Features

•FasterWireless Networking -The DAP-1160 provides up to 150Mbps* wireless connection with other 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio.

•Compatible with IEEE802.11g Devices - The DAP-1160 is still fully compatible with the 802.11g standards, so it can connect with existing 802.11g PCI, USB, and Cardbus adapters.

•Advanced Firewall Features - TheWeb-based user interface displays advanced network management features including Content Filtering, which allows easily applied content filtering based on MAC Address.

•WPS PBC- (Wi-Fi Protected Setup Push Button Configuration) Push Button Configuration is a button that can be pressed to add the device to an existing network or to create a new network. A virtual button can be used on the utility while a physical button is placed on the side of the device.

This easy setup method allows you to form a secured wireless link between the DAP-1160 and another WPS enabled device. A PC is no longer needed to log into the Web-based interface.

•WPS PIN - (Wi-Fi Protected Setup Personal Identification Number ) A PIN is a unique number that can be used to add the access point to an existing network or to create a new network. The default PIN may be printed on the bottom of the access point. For extra security, a new PIN can be generated. You can restore the default PIN at any time. Only the Administrator (“admin” account) can change or reset the PIN.

•User-friendly Setup Wizard - Through its easy-to-use Web-based user interface, the DAP-1160 lets you control what information is accessible to those on the wireless network, whether from the Internet or from your company’s server. Configure your access point to your specific settings within minutes.

D-Link DAP-1160 User Manual

8

Section 1 - Product Overview

Hardware Overview

Connections

	1	2	3	4
1 WPS/Reset Button	Press 1 second to start the WPS process.
	Press and hold for 5 seconds is Reset Button to restore to its original factory default settings.

2LAN Port Connect 10/100 Ethernet devices such as computers, switches, and hubs.

3Power Button Push the Power Button to switch power on/off.

4Power Receptor Receptor for the supplied power adapter.

D-Link DAP-1160 User Manual

9

Section 1 - Product Overview

Hardware Overview

LEDs

			1	2	3
	1	Power LED	A solid green light indicates a proper connection to the power supply.
	2	Wireless LED	A solid green light indicates the wireless function is working. The light will be off during
			device reboot or if the wireless radio is disabled.
	3	WPS LED	A solid light indicates a successful WPS connection. A blinking light indicates the device is
			trying to establish a connection.
D-Link DAP-1160 User Manual					10

Section 2 - Installation

Installation

Please configure the DAP-1160 with a computer connected directly to the AP. The next few pages will explain the different operational modes you can use.

Operation Modes

Depending on how you want to use your DAP-1160 will determine which mode you use. This section will help you figure out which setting works with your setup.

•Access Point Mode - page 12

•Wireless Client Mode - page 13

D-Link DAP-1160 User Manual

11

Section 2 - Installation

Access Point Mode

In the Access Point mode, the DAP-1160 acts as a central connection point for any computer (client) that has a 802.11n or backward-compatible 802.11g wireless network interface and is within range of the AP. Clients must use the same SSID (wireless network name) and channel as the AP in order to connect. If wireless security is enabled on the AP, the client will need to enter a password to connect to the AP. In Access Point mode, multiple clients can connect to the AP at the same time.

Computer

Internet	Modem	Router	DAP-11603 0
			(in Access Point Mode)

Computer

D-Link DAP-1160 User Manual

12

Section 2 - Installation

Wireless Client Mode

In the Wireless Client mode, the DAP-1160 acts as a wireless network adapter for your Ethernet-enabled device (such as a game console or a TV set-top box). Connect your Ethernet-enabled device to the AP using an Ethernet cable. The AP Client mode can support multiple wired clients.

Example: Connect a gaming console using an ethernet cable to the DAP-1160. The unit is set to Wireless Client mode which will wirelessly connect to a wireless router on your network.

Computer

Gaming Console

Internet	Modem	Router	DAP-11603
			(in Wireless Client Mode)

D-Link DAP-1160 User Manual

13

Section 2 - Installation

Wireless Installation Considerations

The D-Link wireless access point lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:

1.Keep the number of walls and ceilings between the D-Link access point and other network devices to a minimum. Each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.

2.Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.

3.Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless access points, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal.

4.Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.

5.If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone is not in use.

D-Link DAP-1160 User Manual

14

Section 3 - Configuration

Configuration

This section will show you how to configure your new D-Link wireless access point using the web-based configuration utility.

Web-based Configuration Utility

If you wish to change the default settings or optimize the performance of the DAP-1160, you may use the web-based configuration utility.

To access the configuration utility, open a web browser such as Internet Explorer and enter http://dlinkap or http://192.168.0.50 in the address field.

Select admin and then enter your password. Leave the password blank by default.

If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance.

D-Link DAP-1160 User Manual

15

Section 3 - Configuration

Wireless Setup Wizard

Click Launch Wireless Setup Wizard to configure your access point.

Click Next to continue.

D-Link DAP-1160 User Manual

16

Section 3 - Configuration

Access Point Mode

This Wizard is designed to assist you in configuring your DAP-1160 as an access point.

Select Access Point from the drop-down menu. Then, click Next to continue.

Enter a name for your wireless network (SSID).

Enter your Wi-Fi Password. This Password must be entered on your wireless clients.

Click Next to continue.

D-Link DAP-1160 User Manual

17

Section 3 - Configuration

The following screen will show you your network key to enter on your wireless clients.

Click Save to finish the Setup Wizard.

D-Link DAP-1160 User Manual

18

Section 3 - Configuration

Wireless Client Mode

This Wizard is designed to assist you in configuring your DAP-1160 as a wireless client.

Select Wireless Client from the drop-down menu.

Select Manual configuration to setup your network manually.

Click Next to continue.

D-Link DAP-1160 User Manual

19

Section 3 - Configuration

Find your access point from the list, click the radio button in the right column, and click Connect.

Enter the Wi-Fi password. Click Next to complete the Setup Wizard.

The Wi-Fi Setup Wizard is complete. Click Finish to reboot the device.

D-Link DAP-1160 User Manual

20

Section 3 - Configuration

Manual Configuration

Wireless Settings

You may manually configure your DAP-1160 instead of running the setup wizard.

•Access Point Mode - page 22

•Wireless Client Mode - page 24

D-Link DAP-1160 User Manual

21

Section 3 - Configuration

Access Point Mode

Enable Wireless: Check the box to enable the wireless function. If you do not want to use wireless, uncheck the box to disable all the wireless functions. You may also set up a specific time range (schedule). Select a schedule from the dropdown menu or click Add New to create a new schedule.

Wireless Mode: Select Access Point from the drop-down menu.

Wireless When you are browsing for available wireless networks, Network Name: this is the name that will appear in the list (unless Visibility Status is set to Invisible, see below). This name is also referred to as the SSID. For security purposes, it is highly recommended to change from the default

network name.

802.11 Mode: Select one of the following:

802.11n Only - Select if you are only using 802.11n wireless clients.

Mixed 802.11n and 802.11g - Select if you are using a mix of 802.11n and 11g wireless clients.

Mixed 802.11n, 802.11g and 802.11b - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients.

Wireless Indicates the channel setting for the DAP-1160. The Channel can be changed to fit the channel setting for an existing wireless network Channel: or to customize the wireless network. If you enable Auto Channel Scan, this option will be grayed out.

Enable Auto The Auto Channel Scan setting can be selected to allow the DAP-1160 to choose the channel with the least amount of interference.

Channel Scan:

D-Link DAP-1160 User Manual

22