DeWalt DW7460 Instruction Manual
DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 Printed in U.S.A. (JAN01-CD-1) Form No. 392302
DW7460 Copyright © 2001
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
DW7460
Mobile Base
Socle mobile
Base móvil
For Use Only With DEWALT DW746 Table Saw
A utiliser seulement avec les scies à table D
EWALT DW746
Para uso sólo con la Sierra de mesa D
EWALT DW746
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA
DE GARANTIA. ADVERTENCIA: LEASE ESTE INSTRUCTIVO ANTES
DE USAR EL PRODUCTO. SI TIENE DUDAS, POR FAVOR LLAME.
Before returning this
product call
1-800-4-DEWAL T
IF YOU SHOULD EXPERIENCE APROBLEM WITH YOUR DEWAL T PURCHASE,
CALL 1-800-4 DEWALT.
IN MOST CASES, ADEWALT REPRESENTATIVE CAN RESOL VE
YOUR PROBLEM OVER THE PHONE.
IF YOU HAVE A SUGGESTION OR COMMENT, GIVE US A CALL.
YOUR FEEDBACK IS VIT ALTO THE SUCCESS OF DEWALT'S
QUALITY IMPROVEMENT PROGRAM.
See our catalog on the World Wide Web. www.dewalt.com
English
WARNING: FOR YOUR OWN SAFETY, READ INSTRUCTION MANUAL BEFORE OPERATING SAW • ALWAYS WEAR EYE PROTECTION • DO NOT WEAR
GLOVES, NECKTIES, JEWELRY OR LOOSE CLOTHING • CONTAIN LONG HAIR • KEEPHANDS AND FINGERS OUT OF THE SAW BLADE PATH — USE EXTRA
CAUTION WHEN BEVELING • ALWAYS USE BLADE GUARD AND SPREADER FOR EVERY OPERATION FOR WHICH IT CAN BE USED, INCLUDING THROUGH
SAWING • USE A “PUSH STICK” WHEN REQUIRED • KNOW HOW TO AVOID KICKBACKS — SEE MANUAL • ALWAYS SUPPORT WORK WITH TABLE AND
FENCE OR MITER GAUGE • NEVER USE FENCE AND MITER GAUGE TOGETHER • NEVER REACH AROUND OR OVER SAW BLADE • SECURELYMOUNT
SAW BLADE BEFORE OPERATING • NEVER REMOVE JAMMED OR CUT-OFF PIECES UNTIL POWER IS OFF AND BLADE HAS STOPPED • DO NOT EXPOSE
TO RAIN OR USE IN DAMP LOCATIONS • DO NOTOPERATE THIS MACHINE WHILE UNDER THE INFLUENCE OF ALCOHOL OR DRUGS • FAILURE TO COMPLY WITH THESE WARNINGS MAY RESULT IN SERIOUS PERSONAL INJURY.
WARNING: USE OF THIS TOOLCAN GENERATE DUST CONTAINING CHEMICALS
KNOWN TO CAUSE CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.
USE APPROPRIATE RESPIRA TOR YPROTECTION.
DEWALT…GUARANTEED TOUGH
DEWALT high performance industrial tools are made for America’s
toughest industrial and construction applications. The design of
every tool in the line – from drills to sanders to table saws – is the
result of rigorous use on job sites and throughout industry. Each
tool is produced with painstaking precision using advanced manufacturing systems and intense quality control. Every tool is checked
before it leaves the factory to make sure that it meets your standards for durability, reliability and power.
D
EWALT Built Job site Tough…WE GUARANTEE IT.
English
Items Included
• (2) End Bracket
• (2) Side Support
• (1) Castor sub-assembly
• (2) Wheel
• (2) Wheel Housing
• (1) Extension Lever
• (1) Hardware bag
Tools needed
• (2) 13mm or 1/2" open end wrench or socket wrench
• (1) Standard Pliers
Necessary Hardware
Your hardware bag contains all the necessary nuts, bolts,
and washers to assemble the components included with
the DW7460 Mobile Base and to attach it to the DW746
Woodworker’s Table Saw. To make assembly of your
mobile base easier, match the nuts, bolts, and washers
with the hardware chart. Before each step, check your
hardware against the chart and identify the pieces you
need.
Assembly
PLEASE READ ENTIRE ASSEMBLY SECTION
BEFORE PROCEEDING.
STEP 1. Unpack parts and lay out per Figure 1.
STEP 2. Assemble side supports to an end bracket
(Fig. 2).
You will need: 4 - 8 x 20mm carriage bolts
4 - 8mm lock washers
4 - 8mm nuts
Add carriage bolts from the inside and secure each
STEP 3. Assemble wheel housings and remaining end
bracket (Fig. 3).
You will need: 4 - 8 x 20mm carriage bolts
4 - 8mm lock washers
4 - 8mm nuts
Align wheel housings and remaining end bracket to the
side rails. Add carriage bolts from the inside and secure
each with a lock washer and nut. Finger tighten.
STEP 4. Lay base on flat surface to insure assembly is
square and level. Securely tighten all hardware.
FIG. 1
FIG. 3
FIG. 2
Hardware Included with the DW7460
Mobile Base
CARRIAGE BOLT
8 MM X 20
(8 PIECES)
CARRIAGE BOLT
8 MM X 40
(4 PIECES)
CARRIAGE BOLT
8 MM X 60
(2 PIECES)
FLATWASHER
28 MM OD
(4 PIECES)
FLATWASHER
(2 PIECES)
LOCK WASHER
(14 PIECES)
NUT SELF-LOCKING
(2 PIECES)
NUT HEX
(18 PIECES)
BOLT
8 MM X 60
(2 PIECES)
RETAINING RING
(2 PIECES)
Loading...