Denver TC-18C User Manual

Location of controls

INSTRUCTION MANUAL

(1) FUNCTION SWITCH
(CD/POWER OFF/RADIO)
(2) BAND SWITCH
(3) FM ANTE

NNA
(4) CD DOOR
(5) TUNING KNOB
(6) BASS BOOST BUTTON
(7) CD SKIP/SEARCH FORWARD

BUTTON

(8) CD SKIP/SEARCH BACKWA

BUTTON
(9) CD PROGRAM BUTTON
(10) CD REPEAT BUTTON
(11) CD STOP BUTTON
(12) CD PLAY/PAUSE BUTTON

RD

(13) CD LED DISPLAY
(14) CD PLAY/PAUSE LED

INDICATOR
(15) CD REPEAT LED INDICATOR
(16) CD PROGRAM LED

INDICATOR
(17) BATTERY DOOR
(18) FM STEREO LED INDICATOR

(19) SPEAKER LEFT
(20) SPEAKER RIGHT
(21) STEREO HEADPHONE JACK
(22) VOLUME CONTROL KNOB
(23) AC SOCKET

English - 1

AC Operation

Before operation please ensure that the VOLTA

GE on the set corresponds to

the VOLTAGE of your local area. Unravel the AC Line Cord; insert one end
into the AC jack on the set and the other end into a standard AC outlet.

Remarks:

1.In case of malfunction due to electrostatic discharge (ESD), reset the unit by
reconnecting the AC cord again to resume to normal ope

2. When not in use – Unplug the AC power cord completely from the AC socket.

ration.

BATTERY OPERATION

Disconnect the AC Cord Set completely. Open the BATTERY COMPARTMENT
DOOR and insert UM-2/ “C” size x 8 batteries (not supplied) making sure that
the indicated battery polarity is observed.

RADIO OPERATION

1. Slide the FUNCTION switch to the “RADIO” position.

2. Slide the BAND switch to the desired waveband.

3. Turn the TUNING KNOB to your desired radio station.

4. Adjust the sound level by rotating the

VOLUME CONTROL KNOB.

5. To turn off the radio, simply slide the FUNCTION SWITCH to “POWER
OFF” position.

Note: Radio frequency is shown on the TUNING KNOB.

FM STEREO INDICATOR

When tune to a FM stereo broadcast the “FM ST.” LED indicator will light up.
In weak signal areas the FM Stereo signal may not be strong enough and can
cause excessive background noise. In this case, slide the BAND SWITCH to
“FM” position.

ANTENNA

For best reception, fully e

xtend the FM Antenna to receive FM station.

BASS BOOST

To increase bass at all volu

me levels, slide the BASS BOOST BUTTON to “ON”
position to boost the low frequency tone for an emphasized bass sound. To
release the super bass, simply slide the switch to “OFF” position.

English - 2