Denon AVR 5805MK2 User Manual

NEW MODEL INFORMATION

A/V Surround Receiver

TENTATIVE

AVR-5805MK2

The AVR-5805MK2 incorporates a host of new technologies, circuits, and functions to achieve DENON’s ultimate aim for all its amps, which is to recreate the producer’s original intent with absolute fidelity. The "New DDSC-Digital" surround processor, developed around DENON’s design concepts for high-quality sound reproduction, is now equipped with the latest 32-bit floating-point DSP as well as newly-developed AL24 processing, high-performance 24-bit/192-kHz D/A converter, and other much improved technologies. The AVR-5805MK2 is also endowed with a wide range of features such as a hefty10-channel power amp capable of bi-amp drive, new Auto Set-up utilizing multi-point measurement and analysis to support the entire listening area, Room EQ (equalizer), advanced digital audio interfaces including DENON Link and IEEE 1394, support for THX Ultra2, multi-zone system, newly-developed analog video scaler to 1080p, DVI/HDMI video selector, and full up/down video conversion. These new technologies, circuits, and features enable the AVR-5805MK2 to reproduce the original design intent of content producers from a wide range of sources in such areas as surround sound, multi-channel audio, 2-channel stereo, and video.

■ Audio Section

• 'New DDSC-Digital,' for dramatically improved processing performance The New DDSC(Dynamic Discrete Surround Circuit)- Digital is a high-quality surround sound reproduction circuit designed by DENON, and forms the core of the design concept that DENON pursues for all its A/V amps: to faithfully reproduce the original intent of content producers. DENON has succeeded in developing a fully discrete design for the New DDSC-Digital in which high-performance ICs are used in independent blocks to form a signal processor that reproduces surround sound, and the discrete design ensures that all channels are endowed with identical response and quality of sound.

-New 32-bit floating point DSP

Three of the latest 32-bit floating point DSPs for the decoder for main zone. A latest-generation 32-bit floating point SHARC DSP for the second zone.

-24-bit/192-kHz D/A Converter

The latest high-accuracy 24-bit/192-kHz D/A converter has been employed for the audio DAC. The AVR-5805 has 8 of these D/A converters for 16 circuits, achieving differential drive for all 16 channels and digital-to-analog conversion with wide dynamic range at a high S/N.

-High-performance A/D Converter

A high-performance A/D converter of 24-bit/192-kHz quality has been used to significantly boost S/N and dynamic range.

• 'Advanced AL24 Processing,' the latest technology for high sound quality

• DENON Link, enabling high-speed, high-grade digital signal transmission

• IEEE 1394 digital interface - 2 ports

• Large-output Power Amp Section and Power Supply Configuration, for

stable high-power output

• 10-channel power amp, supporting multiple uses Since the 10 speaker terminals can be assigned to any channel, the AVR-5805 can be used to enjoy home theater entertainment in the following configurations:

- One dynamic 9.1-channel surround system in a single room

- 5.1-channel theater environments in two different rooms, both operating simultaneously

- Multi-zone system: a 7.1-channel theater in the main room, a 2.1-channel environment in a second room, and a monaural environment in a small third room.

- "Bi-amp" system: Front (L/R) and Center speakers are bi-wired in a 7.1-channel theater to improve playback quality in the front for enhanced listening enjoyment.

• Stabilized, independent power supplies for each circuit

• Chassis construction to surpress internal/external vibration

• Pure Direct mode, for the pure enjoyment of music in high-quality sound

• Variable Gain Volume and Pre-amp

• New Auto Set-up and Room EQ, Featuring MultEQ from Audyssey, for

overall listening area support

• Full support for the most advanced surround playback formats

- Dolby Digital EX - Dolby Digital - Dolby Pro Logic IIx

- Dolby Headphone - DTS-ES - DTS 96/24

- DTS Neo:6 - DTS - HDCD

• THX, THX Surround EX, THX Ultra2

• Original surround modes from DENON

■ Video Section

• Newly-developed video circuitry, for high picture quality

-5 HDMI/1 DVI digital video inputs; 1 HDMI/1 DVI digital video outputs

-Component video switching

-Video up/down conversion

-I/P conversion and scaling to 1080p

-High-speed, high-accuracy 12-bit/216-MHz video DAC

-TBC (Time Base Correction) technology is used when converting composite video or S-video signals to component video

NEW MODEL INFORMATION

Now with 5 HDMI inputs

■ Expandability

• Analog EXT IN terminal

• 4-zone, multi-room support

• Ethernet and RS-232C terminals

■ Other Functions

• Auto Surround Back Channels ON function, for auto-detection of supporting sources

• Auto Surround mode

• New design and ease-of-use

-Front panel's large display.

-A cursor key and Butons on the front panel

• EL remote controller for easy operation

• On-screen display, for easier, error-free operation

• Variable subwoofer crossover switching (40/60/80/90/100/110/120/150/200/250 Hz)

• Muting level settings (∞/-40dB/-20db)

• Audio Delay function (max. 6 frames)

■ Input/Output Terminals For Every A/V System

• Audio Inputs

13 Sets Analog Inputs ..............

1 Set 10-ch Analog EXT. Input ..........

1 Set 6-ch Analog EXT. Input ............

12 Sets Digital Input .................

PHONO, CD, (TUNER), CDR/TAPE, DVD, VDP, TV, DBS, VCR-1, VCR-2, VCR-3, VCR-4, V.AUX(FRONT)

FRONT L/R, CENTER, SURROUND (A) L/R, SURROUND (B) L/R, SURROUND BACK L/R, FRONT L/R, CENTER, SURROUND L/R,

OPTICAL x6 (incl. FRONT x 1) COAXIAL x6 Denon Link x1

SUBWOOFER

AVR-5805MK2

• Audio Outputs 10 Sets Analog PRE Output ... FRONT L/R, CENTER,

5 Sets Analog REC Output .... VCR-1, VCR-2, VCR-3, VCR-4, CDR/TAPE

3 Set Analog Multi Zone PRE Output

3 Sets Digital Output .............. OPTICAL x3

• Video Inputs 6 Sets Component Video Input..VIDEO-1, VIDEO-2, VIDEO-3, VIDEO-4, VIDEO-5

9 Sets S-Video Input .............. DVD, VDP, TV, DBS, VCR-1,

9 Sets Composite Input .......... DVD, VDP, TV, DBS, VCR-1,

Video Outputs

3 Set Component Video Output

7 Sets S-Video Output ........... VCR-1, VCR-2, VCR-3, VCR-4, MONITOR,

7 Sets Composite Output ....... VCR-1, VCR-2, VCR-3, VCR-4, MONITOR,

■ Specifications

• Power Amplifier Section

Rated output

Front ......................................................

Center ...................................................

Surround (A, B)...................................

Surround Back.....................................

• Preamplifier Section

Analog

Input sensitivity / imepdance 200mV/47kohms

Frequency response .............. 10Hz-100kHz: +0,-3dB (Direct mode)

S/N ........................................ 105 dB(Direct mode)

Rated output ......................... 1.2 V

Digital

D/A output ............................. 2.0 V

Phono

Input sensitivity / impedance.. 2.5 mV

RIAA deviation ...................... +/-1dB(20Hz to 20kHz)

Rated output ......................... 150 mV

• Video Section

Frequency response

Composite video/S-video ...... 5 Hz-10 MHz (+0,-3dB)

Component video .................. 5 Hz-100 MHz (+0,-3dB)

• FM Section

Tuning frequency range...................... 87.5 - 107.9 MHz

Usable sensitivity................................ 1.0 µV (11.2 dBf)

• AM Section

Tuning frequency range...................... 520 - 1710 kHz

Usable sensitivity................................ 18 µV

General

• General

Power supply ........................... AC120V, 60Hz

Power consumption .................. 13 A

Dimensions .............................. 434 (W) x 280 (H) x 505 (D) mm

Weight ...................................... 44.0kg (97 lbs)

SURROUND(A) L/R, SURROUND(B) L/R, SURROUND BACK L/R,

....

ZONE2 L/R, ZONE3 L/R, ZONE4 L/R

VCR-2, VCR-3, VCR-4, V.AUX(FRONT)

.. MONITOR x3 (incl. 1 set for ZONE2)

ZONE2, ZONE3

*THD figures are power amp stage values.

170 W + 170 W 200 W + 200 W ( 170

W 200 W ( 170

W + 100 W 200 W + 200 W ( 170 W + 170 W 200 W + 200 W (

(17-3/32” x 11-1/32” x 19-7/8”)

SUBWOOFER

(8 ohms, 20 Hz - 20 kHz, 0.05 % THD)

6 ohms, 20 Hz - 20 kHz, 0.05 % THD

(8 ohms, 20 Hz - 20 kHz, 0.05 % THD)

6 ohms, 20 Hz - 20 kHz, 0.05 % THD

(8 ohms, 20 Hz - 20 kHz, 0.05 % THD)

6 ohms, 20 Hz - 20 kHz, 0.05 % THD

(8 ohms, 20 Hz - 20 kHz, 0.05 % THD)

6 ohms, 20 Hz - 20 kHz, 0.05 % THD

)

DENON ELECTRONICS (USA), LLC.

19C CHAPIN ROAD, SUITE 205 PINE BROOK, N.J. 07058-9385 USA TEL: 973-396-0810 www.usa.denon.com

DENON CANADA INC.

505 APPLE CREEK BLVD, UNIT 5, MARKHAM, ONTARIO, CANADA L3R 5B1 TEL: 905-475-4085 www.denon.ca

*Design and specifications are subject to change without notice. *“Dolby”, “Dolby Digital-EX”, “Pro Logic IIx”, and the double-D device are

registered trademarks of Dolby Laboratories Licensing Corporation. *“DTS”, “DTS-ES ES” and “Neo:6” are trademarks of Digital Theater System, Inc. *HDCD ®,High Definition Compatible Digital ® and Microsoft® are either

registered trademarks or trademarks of Microsoft Corporation in the United

States and/or other countries. *”DCDi™” is a trademark of Faroudja, a division of Genesis Microchip Inc. *Audyssey MultEQ is a trademark of Audyssey Laboratories. MultEQ and

the Audyssey MultEQ logo are trademarks of Audyssey Laboratories, Inc.

*NSV and Sub Alias Filter are registered trademarks of Analog Devices, Inc.

DENON, LTD.

KAYABACHO TOWER 14F, 1-21-2 SHINKAWA, CHUO-KU, TOKYO 104-0033 JAPAN

16151204 A