Denon AVC-A1 Service Manual

Download

Specifications and Main Features

Audio: Enchantment and Power House
The device is rated to output 140W x2 for an impedance load of a minimum of 8 ohms while maintaining maximum fidelity with low distortion under 0.05%. For surround output under the same conditions the device is capable of emitting 140W x5. For surround acoustics the device goes up to a maximum distortion of 0.7% at 1Khz. Additionally, the device contains bi wiring outputs with each optimized for 8 to 16 ohms load. The phono equalizer input can reach levels of 200 mV at diameters of 47 kΩ.
The device contaains features which allow sound distortion to be maintained at a rate of close to 0 during a frequency range of 20 hertz to 20 kilohertz.
The Dual Size DC Power Up Feature has maximum capabilities of providing 250 watts with a minimum load of 2 ohms.
The Signal-to-Noise ratio is deliberately spaced at a ratio of 105 dB owing to the DIRECT mode.
Video
Apart from audio the device is capable of handling standard video connectors with an input output impedance of 1 Vp-p and 75 ohms.
The devices frequency response consists of a Y signal range of 5hertz to 10 megahertz regardless of the 0.286 Vp-pp impedance speed range of C signal.
General
Multi Voltage Power Supply Supporting AC range of 120V to 230 V currently being used for Taiwan and Asia.
The device supports up to 500 watts consumption with its weight calculation standing at 24.5 kg with measuring dimensions of 434mm x181 mm x 436 mm.
Remote Control
The remote currently supports REP/AA batteries, Two to be Precise. It weighs approximately 6 ounces or 180 grams if batteries are included.
External dimensions: 70 (W) x 215 (H) x 19 (D) mm (2-3/4” x 8-15/32” x 3/4”)

Frequently Asked Questions

Q1: What is the rated output power of the amplifier?
A1: The rated output is 140 watts per channel at 8 ohms with a total output of 2 channels.
Q2: May I connect my speakers with lower impedance?
A2: In case of speakers adjoined with 2 to 24 ohms impedance, the total dissipation at to 16 ohms can be enacted, however, perfection needs to be watched out for.
A3: Their power consumption is 500 W.
Q3: What is the power consumption of the device?
Q4: Does the device support Dolby Digital?
A4: The AVC-A1 does support Dolby Digital AC-3 format.
A5: The weight of AVC-A1 is around 24.5 kg~54lb.
Q5: How heavy is the AVC-A1?
Q6: What kind of batteries needed by the remoter control?
A6: One REP/AA is needed for control with the aid of remoter; Two is Usual.
A7: Yes, the AVC-A1 does have a on screen display feature which raises operational ease.