When using electrical appliances, basic safety precautions should always be followed, including the
following.
• Read all instructions carefully.
• Make sure the voltage of your electrical system corresponds to the voltage shown on the bottom
of the machine.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against re, electrical shock and personal injury, do not immerse cord, plug or appli-
ance in water or other liquid.
• Keep the appliance out of the reach of children and do not leave appliance unattended while in
operation.
• Unplug from the outlet when not in use and before cleaning.
• Do not operate with a damaged cord or plug, or after the appliance malfunctions, or has been
damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair or adjustment.
• The use of accessory attachments not recommended by the manufacturer may result in re,
electrical shock, or personal injury.
• Do not use outdoors.
• Make sure the power cord does not hang over the edge of the table or counter-top to avoid
getting accidentally caught or entangled.
•
Do not place the appliance or its electrical parts on or near electric stoves, cooking surfaces, or gas burners.
• Plug cord into the wall outlet. To disconnect, rst turn machine “o”, then remove plug from wall
outlet.
• Do not use the appliance for other than the intended use. This appliance is to be utilized for
domestic use only. The manufacturer declines all responsibility for any damage caused by improper, incorrect, or irresponsible use.
WARNING: To reduce the risk of re or electric shock, do not remove the cover or the exterior of
the unit. Don’t attempt to repair or modify the machine, doing so will void the warranty. Repair
should be done by authorized service personnel only!
SAVE THESE INSTRUCTIONS
THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY
7
1.1 Short cord instructions
- A short power cord is provided to reduce risks resulting from becoming entangled in or tripping over a
longer cord.
- Longer, detachable power supply cords or extension cords are available and may be used if care is exer-
cised in their use.
- If an extension cord is used, the marked electrical rating should be at least as great as the electrical rating
of the appliance. If the appliance is provided with 3- wire, grounding type cord, the extension should be
a GROUNDING TYPE 3 - WIRE CORD. The longer cord should be arranged so that it will not drape over the
counter-top or table top where it can be pulled on by children or tripped over.
- Your product is equipped with a polarized alternating current line plug (a plug having one blade wider
than the other). This plug will t into the power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to t,
contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized
plug.
2. INTRODUCTION
Thank you for choosing the automatic coee maker.
We hope you enjoy using your new appliance.
Take a few minutes to read these instructions.
This will avoid all risks and damage to the machine.
2.1 Symbols used in these instructions
Important warnings are identied by these symbols.
It is vitally important to observe these warnings.
Danger!
Failure to observe the warning could result in life threatening
injury from electric shock.
Important!
Failure to observe the warning could result in injury or damage
to the appliance.
Danger of burns!
Failure to observe the warning could result in scalds.
Please note:
This symbol identies important advice or information for the
user.
2.2 Letters in brackets
The letters in brackets refer to the legend in the Description of
the Appliance on page 3.
2.3 Troubleshooting and repairs
In the event of problems, rst try and resolve them following
the information given in the section “13. PROBLEMS THAT CAN
BE RESOLVED BEFORE CALLING THE SERVICE CENTER” and “12.
MEANING OF THE ALARM INDICATOR LIGHTS AND WHAT TO DO
WHEN THEY ARE ON”.
If this does not resolve the problem or you require further information, you should consult Customer Experience by calling
the number given on the annexed “Customer Experience” sheet.
If your country is not among those listed on the sheet, call the
number given in the guarantee.
If repairs are required, contact De’Longhi Customer Experience
only.
Contact details are given in the guarantee certicate provided
with the appliance.
3. DESCRIPTION
3.1 Description of the appliance
(page 3)
A. Cup warmer tray
B. Steam knob
C. Steam spout
D. Patented Cappuccino System Frother (Milk Frother)
E. Water tank (removable)
F. Cup support tray
G. Drip tray (removable)
H. Service door
I. Coee spout, adjustable in height
J. Control panel
K. Bean container lid
L. Central lid for the ground coee
M. Infuser
N. Power cable
O. Removable Milk Frother Body
P. Removable Steam Nozzle
8
Q. Measuring scoop for pre-ground coee
R. Coee grounds container (removable)
S. Grinding coarseness regulator
T. Coee bean container
U. Compartment for measuring scoop
V. Ground coee funnel
W. Mobile drawer
3.2 Description of control panel
(page 2)
1) On/o button
2) 1 cup and coee temperature ready light
3) One cup button
4) 2 cup and coee temperature ready light
5) Two cup button
6) Hot water or steam indicator light
7) Hot water selection button
8) Coee quantity selector dial (short, normal or long)
9) Coee avor dial (for weak, normal or strong coee)
10) Rinse and decalcication button
11) Ground coee button (disables the coee grinder)
After removing the packaging, make sure the product is complete and undamaged and that all accessories are present.
Do not use the appliance if it is visibly damaged.
Contact De’Longhi Customer Services.
4.2 Installing the appliance
Important!
When you install the appliance, you should respect the following safety warnings:
• The appliance gives o heat. After positioning the appli-
ance on the worktop, leave a space of at least 1.18 in/ 3
cm between the surfaces of the appliance and the side and
rear walls and at least 6 in/ 15 cm above the coee maker.
• Water penetrating the appliance could cause damage. Do
not place the appliance near taps or sinks.
• The appliance could be damaged if the water it contains
freezes. Do not install the appliance in a room where the
temperature could drop below freezing point.
• Arrange the power cable in such a way that it cannot be
damaged by sharp edges or contact with hot surfaces (e.g.
electric hot plates).
4.3 Connecting the appliance
Important!
Check that the mains power supply voltage corresponds to
the value indicated on the rating plate on the bottom of the
appliance.
Connect the appliance to an eciently earthed and correctly
installed socket with a minimum current rating of 10A only.
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualied
professional.
4.4 Using the appliance for the rst time
Please note :
• Coee has been used to factory test the appliance and it is
therefore completely normal for there to be traces of coee
in the mill.
The machine is, however, guaranteed to be new.
• To avoid malfunctions, never ll with ground coee,
freeze-dried coee or caramelized beans, or other objects
that may damage the machine.
• You should customise water hardness as soon as possible
following the instructions in the section “15. SETTING
WATER HARDNESS” .
1. Remove the water tank (Fig.1), rinse it and ll it with fresh
water, never exceeding the MAX line. When removing the
tank, the milk frother must always be positioned towards
the center of the machine, otherwise the tank cannot be
removed. Replace the tank, pushing it all the way in.
2. Open the lid on the coee bean container (Fig.2). Fill the
container with coee beans. Close the lid.
3. Plug the appliance into the mains socket.
4. Move the milk frother towards the outside and place a cup
underneath (Fig.3). Then turn the machine on by pressing
the button (Fig.4).
5. IMMEDIATELY AFTER, WITHIN A MAXIMUM OF 30 SECONDS,
turn the steam knob counter-clockwise until it stops (Fig.5)
(it is normal for the machine to make some noise).
6. Wait for the and lights to stop ashing. The
ashing lights indicate the machine is preheating. Before
the lights stop ashing the machine will automatically
perform a rinse cycle and a little hot water will release
from the coee spouts and collect in the drip tray. Once
the lights illuminate steadily, the machine has reached the
ideal temperature for making coee.
9
Loading...
+ 9 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.