Page 1
53-1001797-01
January 31, 2010
PowerConnect B-DCX-4S
Chassis Door
Replacement Procedure
Supporting PowerConnect B-DCX-4S Backbone
53-1001797-01
*53-1001797-01*
Page 2
Notes, Cautions, and Warnings
NOTE
CAUTION
CAUTION
DANGER
A NOTE indicates important information that helps you make better use of your computer.
See the safety and regulatory information that shipped with your system. For additional regulatory
information, see the Regulatory Compliance Homepage on www.dell.com at the following location:
www.dell.com/regulatory_compliance.
A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.
A DANGER indicates a potential for property damage, personal injury, or death.
____________________
Information in this document is subject to change without notice.
© 2009 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, Inspiron, Dell Precision, Dimension, OptiPlex, Latitude, PowerEdge, PowerVault, PowerApp, Dell
OpenManage and the YOURS IS HERE
in the U.S. and other countries; Microsoft, Windows, Windows Server, MS-DOS and Windows Vista are either trademarks or registered trademarks
of Microsoft Corporation in the United States and/or other countries.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.
Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
Regulatory Model Codes: Brocade DCX-4S, Brocade DCX
2 PowerConnect B-DCX-4S Chassis Door Replacement Procedure
logo are trademarks of Dell Inc.; Intel, Pentium, and Celeron are registered trademarks of Intel Corporation
53-1001797-01
Page 3
In this guide
NOTE
•Installing a PowerConnect B-DCX-4S Chassis Door . . . . . . . . . . . . . . . . . . . . 3
•Time required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
•Items required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
•Removing a chassis door. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
•Replacing a chassis door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing a PowerConnect B-DCX-4S Chassis Door
The chassis door must be installed to ensure the PowerConnect B-DCX-4S meets EMI and other regulatory
certifications.
Time required
The replacement procedure for the chassis door takes less than five minutes.
Items required
DCX-4S Chassis door.
Removing a chassis door
Support the door to prevent it from falling. Pull and remove the door.
FIGURE 1 Chassis door
PowerConnect B-DCX-4S Chassis Door Replacement Procedure 3
53-1001797-01
Page 4
Replacing a chassis door
1. Align the holes in the door with the pins in the chassis.
2. Push the door into place.
4 PowerConnect B-DCX-4S Chassis Door Replacement Procedure
53-1001797-01
Loading...