Page 1
RACADM Command Line
Reference Guide Addendum
for Carrier Grade Chassis
Management Controller
Page 2
Notes and Cautions
NOTE: A NOTE indicates important information that helps you make better use of
your computer.
CAUTION: A CAUTION indicates potential damage to hardware or loss of data if
instructions are not followed.
____________________
Information in this publication is subject to change without notice.
© 2012 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is
strictly forbidden. Trademarks used in this text: Dell™, the DELL logo, FlexAddress™
PowerEdge™
Explorer
trademarks of Microsoft Corporation in the United States and other countries. Red Hat
Enterprise Linux
Novell
countries. Intel
Open Group in the United States and other countries. Avocent
OSCAR
Copyright 1998-2006 The OpenLDAP Foundation. All rights reserved. Redistribution and use in source
and binary forms, with or without modification, are permitted only as authorized by the OpenLDAP Public
License. A copy of this license is available in the file LICENSE in the top-level directory of the distribution
or, alternatively , at
OpenLDAP Foundation. Individual files and/or contributed packages may be copyrighted by other parties
and subject to additional restrictions. This work is derived from the University of Michigan LDAP v3.3
distribution. This work also contains materials derived from public sources. Information about OpenLDAP
can be obtained at
Copyright 1998-2004 Net Boolean Incorporated. Portions Copyright 2001-2004 IBM Corporation. All
rights reserved. Redistribution and use in source and binary forms, with or without modification, are
permitted only as authorized by the OpenLDAP Public License. Portions Copyright 1999-2003 Howard
Y.H. Chu. Portions Copyright 1999-2003 Symas Corporation. Portions Copyright 1998-2003 Hallvard B.
Furuseth. All rights reserved. Redistribution and use in source and binary forms, with or without
modification, are permitted provided that this notice is preserved. The names of the copyright holders may
not be used to endorse or promote products derived from this software without their specific prior written
permission. This software is provided "as is'' without express or implied warranty. Portions Copyright (c)
1992-1996 Regents of the University of Michigan. All rights reserved. Redistribution and use in source and
binary forms are permitted provided that this notice is preserved and that due credit is given to the University
of Michigan at Ann Arbor. The name of the University may not be used to endorse or promote products
derived from this software without specific prior written permission. This software is provided "as is''
without express or implied warranty.
Other trademarks and trade names may be used in this publication to refer to either the entities claiming
the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade
names other than its own.
2012 - 11
,
and PowerConnect™ are trademarks of Dell Inc. Microsoft®, Active Directory®,
®
, Windows®, Windows Server®,
®
®
is a registered trademark and SUSE ™ is a trademark of Novell Inc. in the United States and other
®
are registered trademarks of Red Hat, Inc. in the United States and other countries.
®
is a registered trademark of Intel Corporation. UNIX® is a registered trademark of The
is a registered trademark of Avocent Corporation or its affiliates.
http://www .Open L DA P.org/license.html
http://www.o p e nld a p.org /
and Windows Vista®
. Portions Copyright 1998-2004 Kurt D. Zeilenga. Portions
are either trademarks or registered
®
is a trademark of Avocent Corporation.
. OpenLDAP is a registered trademark of the
,
OpenManage™,
Internet
®
and Red Hat
Page 3
Overview
This addendum provides the changes to the RACADM Command Line
Interface for Carrier Grade CMC. The controller firmware Carrier Grade
CMC for NEBS enabled chassis requires changes to the command line
interface due to the use of DC input power. This document only provides the
updated RACADM commands for DC input power operation. For all other
commands, see the RACADM Command Line Reference Guide for iDRAC7
1.00.00 and CMC 4.1 available at support.dell.com/manuals.
The following racadm commands are updated for Carrier Grade CMC:
•getpbinfo
•getsensorinfo
getpbinfo
Description Displays power budget status information.
To use this subcommand, you must have CMC Login
User privilege.
Synopsis racadm getpbinfo
Example
[Power Budget Status]
System Input Power = 775 W
Peak System Power = 775 W
Peak System Power Timestamp = 09:21:22 07/13/2012
Minimum System Power = 733 W
Minimum System Power Timestamp = 09:18:28 07/13/2012
Overall Power Health = OK
Redundancy = Yes
System Input Power Cap = 16685 W
Redundancy Policy = Grid Redundancy
Dynamic PSU Engagement Enabled = No
System Input Max Power Capacity = 8916 W
Input Redundancy Reserve = 8916 W
Input Power Allocated to Servers = 910 W
Input Power Allocated to Chassis Infrastructure = 216 W
Total Input Power Available for Allocation = 7057 W
Standby Input Power Capacity = 0 W
Server Based Power Management Mode = No
RACADM Command Line Reference Guide Addendum for Carrier Grade CMC 3
Page 4
Max Power Conservation Mode = No
Server Performance Over Power Redundancy = No
[Chassis Power Supply Status Table]
<Name> <Model> <Power State> <Input Current> <Input Volts> <Output Rated Power>
PS1 OHPTJR Online 0.9 A -56.0 2700 W
PS2 OHPTJR Online 0.8 A -56.0 2700 W
PS3 OHPTJR Online 3.3 A -55.9 2700 W
PS4 OHPTJR Online 3.9 A -55.9 2700 W
PS5 OHPTJR Online 3.4 A -56.0 2700 W
PS6 OHPTJR Online 1.8 A -56.0 2700 W
[Server Module Power Allocation Table]
<Slot#> <Server Name> <Power State> <Allocation> <Priority> <Blade Type>
1 SLOT-01 N/A N/A 1 N/A
2 SLOT-02 N/A N/A 9 N/A
3 SLOT-03 ON 245 W 1 PowerEdgeM600
4 SLOT-04 ON 196 W 1 PowerEdgeM605
5 SLOT-05 ON 169 W 1 PowerEdgeM600
6 SLOT-06 N/A N/A 1 N/A
7 SLOT-07 N/A N/A 1 N/A
8 SLOT-08 N/A N/A 1 N/A
9 SLOT-09 N/A N/A 1 N/A
10 SLOT-10 ON 158 W 1 PowerEdgeM605
11 SLOT-11 N/A N/A 1 N/A
12 SLOT-12 N/A N/A 1 N/A
13 SLOT-13 ON 142 W 1 PowerEdgeM605
14 SLOT-14 N/A N/A 1 N/A
15 SLOT-15 N/A N/A 1 N/A
16 SLOT-16 N/A N/A 1 N/A
[Server Module Power Allocation Table]
<Slot#><Server Name><PowerState><Allocation><Priority><Blade Type>
1 SLOT-01 N/A N/A 5 N/A
2 SLOT-02 OFF 0 W 5 PowerEdgeM805
3 SLOT-03 ON 164 W 5 N/A
4 SLOT-04 ON 155 W 5
5 SLOT-05 ON 180 W 5
6 SLOT-06 ON 180 W 5 PowerEdgeM600
7 SLOT-07 ON 170 W 5
8 SLOT-08 N/A N/A 5 N/A
9 SLOT-09 N/A N/A 5 N/A
10 SLOT-10 Extension(2) N/A 5 N/A
11 SLOT-11 N/A N/A 5 N/A
12 SLOT-12 ON 125 W 5 PowerEdgeM600
13 SLOT-13 N/A N/A 5 N/A
14 SLOT-14 ON 342 W 5 N/A
4 RACADM Command Line Reference Guide Addendum for Carrier Grade CMC
Page 5
15 SLOT-15 ON 140 W 5
16 SLOT-16 ON 125 W 5 N/A
getsensorinfo
Description Displays status for system sensors.
To use this subcommand, you must have CMC Login
User privilege.
Synopsis racadm getsensorinfo
Examples
<racadm getsensorinfo
<senType> <Num> <sensorName> <status> <reading> <units> <lc> <uc>
FanSpeed 1 Fan-1 OK 4908 rpm 2522 14500
FanSpeed 2 Fan-2 OK 4882 rpm 2522 14500
FanSpeed 3 Fan-3 OK 4932 rpm 2522 14500
FanSpeed 4 Fan-4 OK 4930 rpm 2522 14500
FanSpeed 5 Fan-5 OK 4988 rpm 2522 14500
FanSpeed 6 Fan-6 OK 4993 rpm 2522 14500
FanSpeed 7 Fan-7 OK 4923 rpm 2522 14500
FanSpeed 8 Fan-8 OK 4901 rpm 2522 14500
FanSpeed 9 Fan-9 OK 4876 rpm 2522 14500
<senType> <Num> <sensorName> <status> <reading> <units> <lc> <uc>
Temp 1 Ambient_Temp OK 21 celcius N/A 40
<senType> <Num> <sensorName> <status> <AC-OK status>
PWR 1 PS-1 Online OK
PWR 2 PS-2 Online OK
PWR 3 PS-3 Online OK
PWR 4 PS-4 Online OK
PWR 5 PS-5 Online OK
PWR 6 PS-6 Online OK
<senType> <Num> <sensorName> <status>
Cable 1 IO-Cable OK
Cable 2 FPC-Cable OK
RACADM Command Line Reference Guide Addendum for Carrier Grade CMC 5
Page 6
6 RACADM Command Line Reference Guide Addendum for Carrier Grade CMC
Loading...