III.POWER CORDS AND USER DOCUMENTATION ................................................................................................... 3
IV.DATASHEET RESPONSIBLE PARTY NAME AND ADDRESS.................................................................................... 3
V.TRADE (IMPORT/EXPORT) COMPLIANCE DATA .................................................................................................. 3
VI.SYSTEM DIMENSION AND WEIGHT ...................................................................................................................... 4
VII.PERFORMANCE DATA (ErP Lot 3 information is located in section XIV Appendix A) .......................................... 4
VIII.PRODUCT MATERIALS INFORMATION ................................................................................................................. 4
XI.DESIGN FOR ENVIRONMENT ................................................................................................................................ 6
XII.RECYCLING/ END-OF-LIFE SERVICE INFORMATION .......................................................................................... 6
XIV.APPENDIX A: ErP Lot 3 Product (Energy Consumption) Information ................................................................ 7
XV.APPENDIX B: ErP Lot 26 Network Standby (Energy Consumption) Information ............................................. 10
STATEMENT OF COMPLIANCE
This equipment has been determined to be compliant with the applicable standards, regulations, and directives for
the countries where the equipment is marketed. The equipment is affixed with regulatory marking and text as
necessary for the country/agency. Dell manufacturers and markets Multimedia Equipment (MME), Information
Technology Equipment (ITE), Audio Visual Equipment (A/V), Industrial, Scientific, Medial Equipment (ISM) or
combinations of these. Generally, equipment Safety and EMC compliance is based on International IEC and CISPR
standards and their national equivalent along with national standards for Radio (wireless), and Energy. Dell products
have been verified to comply with the EU RoHS Directive 2011/65/EU. Dell equipment does not contain any of the
restricted substances in concentrations and applications not permitted by the RoHS Directive. EMC Emissions Class
refers to one of the following use environments:
• EMC Class B equipment is intended for use in residential/domestic environments but may also be used in
nonresidential/non-domestic environments.
• EMC Class A equipment is intended for use in non-residential/non-domestic environments. Class A equipment
may also be utilized in residential/domestic environments but may cause interference and require the user to take
adequate corrective measures.
For Safety and EMC compliance, this equipment has been assigned a unique regulatory model and regulatory type
that is imprinted on the equipment regulatory labeling to provide traceability to the regulatory approvals noted on
this datasheet. This datasheet applies to any equipment that utilizes the assigned regulatory model and type
including marketing names other than those listed on this datasheet. ErP compliance is tied to the CE mark. REACH
(Registration, Evaluation, Authorization and Restriction of Chemicals, 1907/2006) is the European Union’s (EU)
chemical substances regulatory framework. Dell complies with the REACH directive. For information on SVHC
(Substances of Very High Concern), see www.dell.com/REACH. Compliance documentation, such as certification or
Declaration of Compliance for the equipment is available upon request to [email protected]. Please
Product Safety, EMC & Environmental Datasheet
Revision A11 Page 1
Page 2
\
W
orldwide Regulatory Compliance Engineering and Environmental Affairs
include equipment identifiers such as marketing name, regulatory module, regulatory type and country that
compliance information is needed in request.
Product Safety, EMC & Environmental Datasheet
Revision A11 Page 2
Page 3
\
W
orldwide Regulatory Compliance Engineering and Environmental Affairs
I. GLOBAL ENVIRONMENTAL INFORMATION
Environmental (Voluntary Marks)
Country Approval Compliance
Global ENERGY STAR (Configuration Dependent)Computers , Version 6.1
Varies by country – see EPEAT.net EPEAT (Configuration Dependent) Gold
Global TCO Certified Notebooks Yes
Japan Green PC Label Yes
India BEE Star Yes
Adapter Certification and Declaration
Country Authority/Mark
Australia/New Zealand Australia/NZ MEPS
South Korea South Korea MEPS
Canada NRCan
California Energy Commission Adapter & Battery Charger
EU Regulation EC No 278/2009
II. NFPA 99 CONFORMITY
Select Dell systems have been tested and found to comply with the touch current requirements as defined in
10.3.5 of National Fire Protection Association standard NFPA 99:2012. The touch current does not exceed 100 A with ground wire intact (if a ground wire is provided) and 500 A with ground disconnected at 127 V AC,
60 Hz when tested in accordance with 10.3.5 of NFPA 99: 2012. To determine if this product complies with
the above requirements, send a request to [email protected]. Please include product
identifiers such as marketing name, regulatory type and country for which compliance information is needed.
III. POWER CORDS AND USER DOCUMENTATION
Dell products are provided with the power cord and user documentation suitable for the intended country of
delivery. Products that are relocated to other countries should use nationally certified power cords and plugs
to ensure safe operation of the product. Contact Dell to determine if alternate power cords or user
documentation in other languages is available for your market.
IV. DATASHEET RESPONSIBLE PARTY NAME AND ADDRESS
Dell Inc.Department: Global Regulations and StandardsMS: PS4-30Round Rock, Texas 78682, USA[email protected]
V. TRADE (IMPORT/EXPORT) COMPLIANCE DATA
For any questions related to importing & exporting classification of Dell products, please obtain information
from the following link: www.dell.com/import_export_compliance or send request to
orldwide Regulatory Compliance Engineering and Environmental Affairs
VI.SYSTEM DIMENSION AND WEIGHT
Depth,
mm/cm
231.75mm 332.9mm
VII. PERFORMANCE DATA (ErP Lot 3 information is located in section XIV Appendix A)
* Energy Consumption results are based solely upon the laboratory testing of the System Configuration listed
above. Energy consumption is tested at 230 Volts / 50 Hz.
Energy Consumption*
Energy efficiency benefits the environment and lowers the total cost of equipment ownership by reducing
power consumption. Dell offers energy calculators that help estimate power needs, potential emissions
avoidance and potential cost savings. Click here for Dell’s Client Energy Savings Calculator, Data Center
Capacity Planner, and Monitor Power Savings Calculator. Information on Energy Efficiency is available here
* This document is informational only and reflects laboratory performance. Your product may perform differently, depending on the
software, components and peripherals you ordered. Accordingly, the customer should not rely upon this information in making decisions
about electrical tolerances or otherwise. No warranty as to accuracy or completeness is expressed or implied.
For more details visit www.dell.com/environmental_information
Declared Noise Emissions in accordance with ISO 9296 (tested in accordance with ISO 7779)
Width,
mm/cm
Height,
mm/cm
23mm
Weight, kg
1.63Kg
(depending upon installed options)
VIII. PRODUCT MATERIALS INFORMATION
1
Information on Dell’s material use is available here.
To review Dell’s Restricted Material Guidance document click here.
The case material is, > PC+ABS <
This product contains 0% post-consumer recycled plastic
Marking of plastic parts greater than 25 grams are done in accordance with ISO 11469 (see below)
Product is BFR/PVC Free Yes No
Flame Retardants Used in Motherboard
Part Flame Retardant
Motherboard DOPO
Flame Retardants Used in Mechanical Plastic Parts > 25 grams
Marking per ISO
Resin Material
Name
1146
9:2000,
11469:1996
1
Waste Handling. Local regulations should be observed when disposing of this product due to the presence of the materials and substances as
listed above.
Flame Retardant
Marking per ISO
1043-4 (i.e. FR(16),
FR(40), etc.)
Flame Retardant
(i.e. TBBPA, triaryl
phosphate ester,
etc.)
List applicable
R-Phrase(s) or
Hazard
Statement(s) per
EU Directive
Product Safety, EMC & Environmental Datasheet
Revision A11 Page 4
Page 5
\
W
orldwide Regulatory Compliance Engineering and Environmental Affairs
67/548/EEG or
1272/2008
PC+ABS
MB1700
PC+ABS
Bayer/Covestro
FR3021GR
PC+ABS
Bayer/Covestro
FR3021
PC+ABS
LG LUPOY
ER5151RFL
PC+ABS
SABIC C7230P-
7M2D039
Mercury Information
Number of bulbs Average per bulb
India RoHS Declaration
DECLARATION OF CONFORMITY WITH GAZETTE OF INDIA: EXTRAORDINARY, E-WASTE (MANAGEMENT &
HANDLING) RULES (INDIA ROHS)
Manufacturer Name and Address:
Dell Inc.
One Dell Way
Round Rock, Texas, USA
78682
Dell Inc. declares that all Dell branded products have been designed and manufactured in compliance with E-Waste
(Management & Handling) Rules
and electronic equipment and their maximum allowed concentrations by weight in the homogenous material
(except for the exemptions listed in schedule II).
Substance Concentration
Lead 0.1%
Mercury 0.1%
PBB (Polybrominated Biphenyls) 0.1%
PBDE (Polybrominated Diphenyl Ethers) 0.1%
Hexavalent Chromium 0.1%
Cadmium 0.01%
Compliance has been verified via internal design controls, supplier declarations, and/or analytical test data. The
undersigned below possesses the complete technical documentation relating to the declaration of compliance.
PC+ABS-TD15FR
(40)
PC+ABS-TD15FR
(40)
PC+ABS-TD15FR
(40)
PC+ABS-TD15FR
(40)
PC+ABS-TD15FR
(40)
FR(40) phosphate 67/548/EEG
Halogen-free
FR(40)
organic phosphorus
1272/2008
compounds
Halogen-free
FR(40)
organic phosphorus
1272/2008
compounds
FR(40) BPADP
EU Directive
67/548/EEG
Halogen-free
FR(40)
organic phosphorus
1272/2008
compounds
0 0 mg
2
on the reduction in the use of hazardous materials in the manufacture of electrical
2
E-Waste (Management & Handling) Rules 2011, by the Ministry of Environment & Forests, Government of India dated May 12, 2011.
Product Safety, EMC & Environmental Datasheet
Revision A11 Page 5
Page 6
\
W
orldwide Regulatory Compliance Engineering and Environmental Affairs
For additional information please visit:
Restricted Material Compliancewww.dell.com/environmental_information
Products MSDS (Material Safety Data Sheets):
Batteries: Battery MSDS Documentation and Declaration
Printer Toner and Ink: MSDS Documentation
IX. PACKAGING
Information on Dell’s sustainable packaging effort available here.
Additional materials restricted in Packaging as per Dell’s Restricted Material Guidance document found here.
Packaging Materials
Corrugated Fiberboard
EPE
Molded paper pulp
LDPE Bags
X. BATTERIES
Below is a listing of batteries that could be present in the product:
XI. DESIGN FOR ENVIRONMENT
Dell systems are, when applicable, designed for easy assembly, disassembly, and servicing.
For more information on product Recyclability please visit www.dell.com/environmental_information
Total Weight
of each
Material
type, (kg)
0.397 100% 100% 100%
0.001 100% 100% 100%
0.16 100% 100% 100%
0.014 100% 100% 100%
Battery Description – Batteries Battery Type Battery Weight (kg)
CR-2032 coin cell
Rechargeable Battery 4 cell
% of Post-Consumer Recycled Content (PCR)
APJ region DAO region EMEA region
Lithium
Lithium Ion
Max: 0.0036
Max: 0.250
XII. RECYCLING/ END-OF-LIFE SERVICE INFORMATION
Take back and recycling services are offered for this product in certain countries. If you want to dispose of
system components, contact Dell for instructions by emailing [email protected] or visit
www.dell.com/recyclingworldwide and select the relevant country.
Product Safety, EMC & Environmental Datasheet
Revision A11 Page 6
Page 7
\
W
y
orldwide Regulatory Compliance Engineering and Environmental Affairs
XIV. APPENDIX A: ErP Lot 3 Product (Energy Consumption) Information
The ErP Lot 3 Standard includes requirements for certain product specific information to be provided by the
manufacturer. This is applicable to Desktops, Integrated Desktops, Notebooks, Tablets, Slates, Notebook Thin
Clients, Desktop Thin Clients, Workstations, Mobile Workstations, Computer Servers, and Small Scale Servers.
ErP Lot 3 provides certain exclusions based upon product type, screen size, and/or the amount of power consumed
in idle mode. Product energy and acoustic information might be reported for products that are out of scope of ErP
Lot 3 for informational purposes only.
Processor Speed in GHz
Categor
Number of Cores
Total Installed System Memory in GB
WOL enabled in "Sleep" Mode
WOL enabled in "Off" Mode
As Tested:
As Tested:
As Tested:
As Tested:
As Tested:
As Tested:
Lowest P ower S tate
Poff(W) WOL Di sabled
Poff(W) WOL Enabled
Psl eep(W) W OL Disabled
Psl eep(W) W OL Enabled
Pidle(W)
Base TEC Limit (kWh)
TEC Adders Limit (kWh)
Base + Adders TEC Limit (kWh)
Results TEC
Graphics
Category A
2.3
2
4
Integrated
No
No
0.38
0.38
0.58
2.15
2700
0.000.000.00
27.000.000.00
8.170.000.00
0
0
0
Select
NoNo
NoNo
0
0
0
Select
Product Safety, EMC & Environmental Datasheet
Revision A11 Page 7
Page 8
\
W
orldwide Regulatory Compliance Engineering and Environmental Affairs
Client Computers:
Service Level
*Max imum11 . 7540. 1 9The s ys tem is running progra ms to max imiz e the power c ons umption.
Idle Mode2.157.35As specified EPA E nergy Star Computer mode.
S 3 “S leep” Mode0.581.97S us pend-to-RAM (low-power/sleep mode)
Off0.381.31
External P ower Supply “No-Load”
(if applicable)
Power Supply Model
#
DA65NM170 External
HA65NM170 External
LA65NM170 External
* Energy Consumption results are based solely upon the laboratory testing of the System Configuration listed
above. Energy consumption is tested at 230 Volts / 50 Hz.
Energy Consumption*
Energy efficiency benefits the environment and lowers the total cost of equipment ownership by reducing
power consumption. Dell offers energy calculators that help estimate power needs, potential emissions
avoidance and potential cost savings. Click here for Dell’s Client Energy Savings Calculator, Data Center
Capacity Planner, and Monitor Power Savings Calculator. Information on Energy Efficiency is available here
* This document is informational only and reflects laboratory performance. Your product may perform differently, depending on the
software, components and peripherals you ordered. Accordingly, the customer should not rely upon this information in making decisions
about electrical tolerances or otherwise. No warranty as to accuracy or completeness is expressed or implied.
For more details visit www.dell.com/environmental_information
Declared Noise Emissions in accordance with ISO 9296 (tested in accordance with ISO 7779)
0.060.21AC adapter connected to mains with s ys tem detached otherwis e known as “No-load” condition.
BTU
Cal cula tion
Description of S e rvi ce L eve l
S ys tem is turned off but s till connected to its AC power source. If the product is a computer, the
Low Power Mode feature is enabled via BIOS if available.
Sound Pressure
Bystander Position
, decibels) (re 2x10-5 Pa)
Sound Pressure
Bystander Position
, decibels) (re 2x10-5 Pa)
XV. APPENDIX B: ErP Lot 26 Network Standby (Energy Consumption) Information
The ErP Lot 26 Standard includes Network Standby power requirements to be provided by the manufacturer. This is
applicable to multiple product categories. If no information is reported, it’s assumed it is out of scope of ErP Lot 26.
Product Safety, EMC & Environmental Datasheet
Revision A11 Page 10
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.