Dell 114-0922, 114-1548 Installation Instructions Manual

All-In-One for

Dell OptiPlex SFF

Installation Instructions
Kit P/N: 114-0922 (with cover)
114-1548 (without cover)

Patent(s) Pending

Page 2

Kit Contents

Assembly Components:

(1) Stand Assembly
(1) Dell Monitor Bracket (Attached)
(1) PC Bracket (Attached)
(1) VESA Monitor Bracket
(1) Rear Cover (114-0922 only)

Monitor Hardware Package:

(8) Nylon Spacers
(5) M4 x 10mm Pan Head Screws
(5) M4 x 18mm Pan Head Screws
(5) M4 x 25mm Pan Head Screws

Installation Instructions

Step1 Computer & Cover Installation: Remove the PC Bracket and orient the computer

in the appropriate position on the stand. Remove the 10-32 Truss Head Screw
and attach the cover by hooking it to the top of the computer. Reinstall the Truss
Head Screw to complete the installation of the cover. The computer may need
some adjustment for optimum t of the cover. Install the PC Bracket with the
Thumb Screw to secure the PC on the stand.

Step 2a Monitor Attachment: The Stand will attach to most Dell Monitors; the monitor

attaches similar to Dell's monitor stand using the latch and button on back (no
tools required). If your monitor does not attach or you are using a VESA monitor
continue to Step 2b.

Step 2b Dell Monitor Bracket Removal: If you are using the VESA Monitor Bracket, you

will need to remove the Dell Monitor Bracket by loosening the Thumb Screw and
pivot the bracket away from stand.

SFF Computer

PC Bracket

Thumb Screw

Cover

10-32 Truss Head

Dell Monitor Bracket

Thumb Screw