DBX IEM User Guide
A Harman International Company
®
Finally! There is now a digital signal processor that has been designed specifically for in ear monitor applications. New from dbx Professional Products, comes the IEM, In-Ear-Monitor Processor which is the ideal
tool for fine-tuning mix monitoring for In-Ear monitoring devices. Not only does the IEM provide the legendary dbx effects in the digital domain, such as 4-band stereo compression, PeakStop™ limiting and 5band parametric EQ, but the IEM also includes stereo adjust, dbx proprietary Type IV™ conversion system, and for good measure, we have even raised the playing field by including custom reverb algorithms
using the industry-standard Lexicon®digital reverb technology. The IEM from dbx Professional Products
is a unit that is certain to take In-Ear Monitor processing to the next level.
From the company that has been redefining the standard of signal processing for more than 25 years,
®
dbx
Professional Products now offers a bulletproof product that caters to the scrutinizing needs of performers who utilize In-Ear Monitoring devices. The IEM was designed with the simple purpose and
vision of enhancing the sonic quality of all In-Ear monitor applications, while providing the necessary
audio level protection that artists and engineers require. The design team at dbx has achieved this pursuit
by building a unit that offers effects including: 4-band stereo compressor with gating and limiting, 5Band Parametric EQ, PeakStop™ limiting, Stereo adjust and Lexicon
®
reverbs. In addition to methodically designing a utilitarian unit that includes an intuitive user front panel which provides instant access
to all effects within the IEM at the push of a button, as well as a large custom display which clearly
shows all operational information of the unit in a logical manner. Software updates can be downloaded
instantly from www.dbxpro.com through the RS 232 port.
• Industry-Standard Lexicon®Reverb
Algorithms
• 48 bit internal signal path for increased
head room and low level resolution
• TYPE IV™ A/D Conversion system with
TSE™
• 4-band stereo Compressor and limiter with
classic dbx Compression
• 5-band EQ – Hi and Lo shelves, 3 band
fully parametric
• PeakStop™ limiting
• Stereo adjust – to control your stereo image
• Software updateable via Internet and RS
232 port
• 4-band crossover with
variable slopes
8760 S. Sandy Pkwy.
Sandy, Utah 84070
Phone (801) 568-7660
Fax (801) 568-7662
Int’l Fax (801) 568-7583
customer@dbxpro.com
http://www
.dbxpro.com
18-1788-A
01/01
A Harman International Company
T
I
nputs
Connectors:
T
ype: Electronically balanced/unbalanced, RF filtered
Impedance:
Max Input Level: +24 dBu balanced or unbalanced
C
MRR:
Input Gain Range:
MIDI: 5-Pin DIN MIDI Input Jack
Outputs
Connectors:
ype:
T
Impedance: Balanced 120 Ω, unbalanced 60 Ω
Max Output Level: >+21dBu balanced/unbalanced into 2kΩ or greater
Output Gain Range: -∞ to +16 dB
MIDI:
PC COMM:
A-D System Performance
A-D Conversion: 24-bit, dbx Type IV™ Conversion System
Convertor Dynamic Range: 114 dB typical, A-weighted, 22 kHz bandwidth
Female XLR and 1/4'' TRS (Pin 2 and tip hot)
Balanced >18 kΩ, unbalanced >9 kΩ
>40 dB, typically >55 dB at 1 kHz
to +16 dB
∞
-
Male XLR and 1/4'' TRS (Pin 2 and tip hot)
Servo-balanced/unbalanced, RF filtered
>+20dBm balanced/unbalanced (into 600Ω)
5-Pin DIN MIDI Out/Thru Jack
RS 232
112 dB typical, unweighted, 22 kHz bandwidth
ype IV™ Dynamic Range: Up to 127 dB with transient material, A-weighted, 22 kHz bandwidth
THD+Noise: 0.002% typical at +4 dBu, 1 kHz, input gain at 0 dB
F
requency Response:
Interchannel Crosstalk:
D-A System Performance
Conversion:
D-A
Dynamic Range: 115 dB typical, A-weighted, 22 kHz bandwidth
THD+Noise: 0.002% typical at +4 dBu, 1 kHz, output gain at 0 dB
Frequency Response: 20 Hz to 20 kHz, +0/-0.5 dB
Interchannel Crosstalk: < -85 dB at 1 kHz, output gain at 0 dB
Power Supply:
oltage:
Operating V
Power Consumption:
Physical:
Dimensions: 1.75''Hx10''Dx19''W
Weight: 7.14 lbs. (3.24 kg)
Shipping Weight: 10 lbs (4.40 kg)
Up to 125 dB with transient material, unweighted, 22 kHz bandwidth
T
ypically 119 dB with program material, A-weighted, 22 kHz bandwidth
ypically 117 dB with program material, unweighted, 22 kHz bandwidth
T
20 Hz to 20 kHz, +0/-0.5 dB
<
-85 dB at 1 kHz, input gain at 0 dB
24-bit
12 dB typical, unweighted, 22 kHz bandwidth
1
100-240 VAC 50/60 Hz
24 watts
dbx engineers are constantly working to improve the quality of our products. Specifications are, therefore subject to change without notice.
FOR MORE INFORMA
dbx Professional Products
8760 S. Sandy Pkwy.
Phone (801) 568-7660
Fax (801) 568-7662
Int’l Fax (219) 462-4596
customer@dbxpro.com
http://www
TION CONT
, Utah 84070
Sandy
.dbxpro.com
ACT:
Loading...