DBX DriveRack VENU360 Quick Start Manual
Quick Start Guide
dbx Professional Products
801.566.8800
dbxpro.com
PN: 5041207-B
mobile device to go straight to web URL.
venu360#documentation or scan the code to the right with a QR scanner app on your
Get the owner’s manual at http://dbxpro.com/en-US/products/driverack-
DOWNLOAD THE OWNER’S MANUAL
your mobile device to go straight to web URL.
registration or scan the code to the right with a QR scanner app on
Register your product at http://dbxpro.com/en-US/support/warranty_
PRODUCT REGISTRATION
• Rack Mount Screw Kit
• Power Cable
• DriveRack VENU360 Processor
WHAT’S IN THE BOX
1
Left Speaker Right Speaker
GETTING STARTED
Before making any audio connections, perform the following:
• Ensure power to your mixer, DriveRack, and amplifier(s) are turned off.
• Turn the attenuators on all power amplifiers or powered speakers all the way down.
MONO 2-WAY FOH + 2 STAGE MONITORS
21
Stage Monitor Amp
Left Main Speaker
High Amp
RL
LR
Right Main Speaker
• Make connections per your application using the system diagrams to the right for reference.
• Power up the mixer, then the DriveRack, then your amplifiers or powered speakers.
2
RUN THE SETUP WIZARD
• Press the WIZARD button.
• Select the “RUN ALL WIZARDS” option using the DATA WHEEL.
• Follow the on-screen instructions and make the desired configuration
selections.
PRESS
TURN & PRESS
TO SELECT
1 2
Stage Monitor 1 Stage Monitor 2
or
or
Windows® or Mac®
Computer
iOS® or Android®
Tablet
Wireless Router
Left Sub Speaker
Low Amp
LR
Mixer
RL
Right Sub Speaker
Aux 2 Aux 1 Mono
STEREO 2-WAY FOH W/AUX-FED SUB + 2 ZONES OR DELAYS
3
CALIBRATE THE SYSTEM
• When you reach the Level Assist/AutoEQ™ Wizard, connect the optional
dbx RTA-M measurement microphone to the RTA MIC INPUT and place
it in a mic stand. If you don’t have the RTA-M mic, skip Level Assist/
AutoEQ and go to step 4.
• Place the RTA-M microphone as shown in the illustration to the right –
the placement of the microphone should form an equilateral triangle with
the Front of House loudspeakers. If performing AutoEQ on monitors,
follow the DriveRack’s on-screen instructions.
4
RING OUT THE SYSTEM FOR FEEDBACK
When you reach the AFS™ (Advanced Feedback Suppression) Wizard,
ensure all performance microphones are connected and follow the onscreen instructions to ring out the system for potential feedback. All mics
should be active, but there should be no signal present at the microphones
during this procedure.
RTA-M Mic
Placement
Zone or Delay Fill Amp
Zone or Delay Fill 1
or
Windows® or Mac®
Computer
21
1 2
Zone or Delay Fill 2
or
iOS® or Android®
Tablet
Left Main Speaker
Left Sub Speaker
Wireless Router
LCR 2-WAY FOH
L
High Amp
Low Amp
LR
LR
Mixer
RL
Right Main Speaker
R
Right Sub Speaker
RAux L
5
CONNECT TO YOUR NETWORK
Connect the DriveRack’s Ethernet port to your computer, network switch,
or wireless router for network setup and control using the free VENU360
control app for compatible Mac
Visit www.dbxpro.com for further details.
NOTE: The VENU360’s network address can be configured
manually or dynamically using a DHCP enabled switch or router.
By default, DHCP is enabled. Network settings can be changed in
the Utility menu.
®
, Windows®, Android®, and iOS® devices.
© 2015 Harman. dbx Professional Products is a registered trademark of Harman. All rights reserved. All features and specifications
are subject to change. Macintosh, iPad, iTunes, and App Store are trademarks of Apple Inc., registered in the U.S. and other countries.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Windows is a registered
trademark of Microsoft Corporation in the United States and other countries. Android is a trademark of Google Inc..
LEGEND
L
C
R
Analog Audio Connection
Ethernet Connection
Wi-Fi Signal
Left Signal
Center Signal
Right Signal
L C R
Left Powered Speaker
L C R
Left Powered Sub
or
or
Windows® or Mac®
Computer
iOS® or Android®
Center Powered Speaker
Center Powered Sub
Tablet
Wireless Router
Right Powered Speaker
Right Powered Sub
Mixer
CR L
Loading...