Page 1
STI11NM80, STP11NM80, STW11NM80
TO-247
D²PAK
TO-220
TO-220FP
1
2
3
1
3
1
2
3
1
2
3
I²PAK
1
2
3
N-channel 800 V, 0.35 Ω, 11 A MDmesh™ Power MOSFET
in D²PAK, TO-220FP, I²PAK, TO-220, TO-247
Features
R
Order codes V
DSS
DS(on)
max
STB11NM80
STF11NM80
STI11NM80
800 V < 0.40 Ω 14Ω*nC 11 A
STP11NM80
STW11NM80
■ Low input capacitance and gate charge
■ Low gate input resistance
■ Best R
*Qg in the industry
DS(on)
R
DS(on)*QgID
STB11NM80, STF11NM80
Applications
■ Switching applications
Description
These N-channel Power MOSFETs are
developed using STMicroelectronics'
revolutionary MDmesh™ technology, which
associates the multiple drain process with the
company's PowerMESH™ horizontal layout.
These devices offer extremely low on-resistance,
high dv/dt and excellent avalanche
characteristics. Utilizing ST's proprietary strip
technique, these Power MOSFETs boast an
overall dynamic performance which is superior to
similar products on the market.
Table 1. Device summary
Order codes Marking Package Packaging
STB11NM80 B11NM80 D²PAK Tape and reel
STF11NM80 F11NM80 TO-220FP
STI11NM80 I11NM80 I²PAK
STP11NM80 P11NM80 TO-220
STW11NM80 W11NM80 TO-247
Figure 1. Internal schematic diagram
$
'
3
!-V
Tu be
September 2011 Doc ID 9241 Rev 11 1/22
www.st.com
22
Page 2
Contents STB/F/I/P/W11NM80
Contents
1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2/22 Doc ID 9241 Rev 11
Page 3
STB/F/I/P/W11NM80 Electrical ratings
1 Electrical ratings
Table 2. Absolute maximum ratings
Value
Symbol Parameter
D²PAK, I²PAK
TO-220, TO-247
TO-220FP
Unit
Drain-source voltage (VGS = 0) 800 V
DS
Gate-source voltage ±30 V
GS
Drain current (continuous) at TC = 25 °C 11 11
D
Drain current (continuous) at TC=100 °C 8 8
D
(2)
Drain current (pulsed) 44 44
Total dissipation at TC = 25 °C 150 35 W
I
P
V
V
I
I
DM
TOT
Derating factor 1.2 0.28 W/°C
V
ISO
T
T
1. Limited only by the maximum temperature allowed
2. Pulse width limited by safe operating area
Table 3. Thermal data
Insulation withstand voltage (DC) 2500 V
Operating junction temperature
J
Storage temperature
stg
Symbol Parameter
R
thj-case
R
thj-a
Thermal resistance junction-case
max
Thermal resistance junctionambient max
(1)
(1)
(1)
-65 to 150 °C
Val ue
Unit
D²PAK TO-220FP I²PAK TO-220 TO-247
0.83 3.6 0.83 °C/W
62.5 50 °C/W
A
A
A
R
thj-pcb
T
1. When mounted on 1inch² FR-4 board, 2 oz Cu
Table 4. Avalanche characteristics
max
Maximum lead temperature for
l
soldering purpose
30 °C/W
300 °C
Thermal resistance junction-pcb
(1)
Symbol Parameter Value Unit
I
AS
E
AS
Avalanche current, repetitive or notrepetitive (pulse width limited by Tj max)
Single pulse avalanche energy
(starting Tj = 25 °C, I
= IAR, V
D
DD
= 50 V)
2.5 A
400 mJ
Doc ID 9241 Rev 11 3/22
Page 4
Electrical characteristics STB/F/I/P/W11NM80
2 Electrical characteristics
(T
= 25 °C unless otherwise specified)
CASE
Table 5. On/off states
Symbol Parameter Test conditions Min. Typ. Max. Unit
V
(BR)DSS
dv/dt
I
DSS
I
GSS
V
GS(th)
R
DS(on)
1. Characteristic value at turn off on inductive load
Drain-source breakdown
voltage (VGS = 0)
(1)
Drain source voltage slope
Zero gate voltage drain
current (VGS = 0)
Gate body leakage current
= 0)
(V
DS
= 250 µA 800 V
I
D
V
= 640 V, ID = 11 A,
DD
= 10 V
V
GS
= 800 V,
V
DS
= 800 V @125°C
V
DS
V
= ±30 V 100 nA
GS
30 V/ns
Gate threshold voltage VDS= VGS, ID = 250 µA 3 4 5 V
Static drain-source on
resistance
V
= 10 V, ID= 5.5 A 0.35 0.40 Ω
GS
10
100µAµA
Table 6. Dynamic
Symbol Parameter Test conditions Min. Typ. Max. Unit
(1)
g
fs
C
C
C
Q
Q
Q
Forward transconductance
Input capacitance
iss
Output capacitance
oss
Reverse transfer
rss
capacitance
Total gate charge
g
Gate-source charge
gs
Gate-drain charge
gd
V
ID= 7.5 A
V
V
VDD=640 V, ID = 11 A
V
(see Figure 18)
f=1MHz Gate DC Bias=0
R
Gate input resistance
g
Test signal level=20 mV
open drain
t
d(on)
t
d(off)
1. Pulsed: pulse duration=300µs, duty cycle 1.5%
Turn-on delay time
t
Rise time
r
Turn-off delay time
t
Fall time
f
V
RG=4.7 Ω, VGS=10 V
(see Figure 17)
> I
DS
=25 V, f=1 MHz,
DS
=0
GS
=10 V
GS
=400 V, ID= 5.5 A,
DD
D(on)
x R
DS(on)max
,
-8- S
1630
-
750
30
43.6
-
11.6
21
-2.7- Ω
22
17
46
15
pF
-
pF
pF
nC
-
nC
nC
ns
ns
ns
ns
4/22 Doc ID 9241 Rev 11
Page 5
STB/F/I/P/W11NM80 Electrical characteristics
Table 7. Source drain diode
Symbol Parameter Test conditions Min. Typ. Max. Unit
I
SD
I
SDM
V
SD
t
Q
I
RRM
t
Q
I
RRM
1. Pulse width limited by safe operating area
2. Pulsed: pulse duration=300µs, duty cycle 1.5%
Source-drain current
(1)
Source-drain current (pulsed) 44 A
(2)
Forward on voltage ISD=11 A, VGS=0 - 0.86 V
Reverse recovery time
rr
Reverse recovery charge
rr
Reverse recovery current
Reverse recovery time
rr
Reverse recovery charge
rr
Reverse recovery current
ISD=11 A,
di/dt = 100 A/µs,
= 50 V
V
DD
ISD=11 A,
di/dt = 100 A/µs,
= 50 V, Tj=150 °C
V
DD
-
11 A
612
-
7.22
23.6
970
-
11.25
23.2
ns
µC
A
ns
µC
A
Doc ID 9241 Rev 11 5/22
Page 6
Electrical characteristics STB/F/I/P/W11NM80
I
D
10
1
0.1
0.1
1
100
V
DS
(V)
10
(A)
Operation in this area is
Limited by max R
DS(on)
10µs
100µs
1ms
10ms
1µs
Tj=150°C
Tc=25°C
Sinlge
pulse
0.01
AM03329v1
2.1 Electrical characteristics (curves)
Figure 2. Safe operating area for D²PAK,
I²PAK, TO-220, TO-247
I
D
(A)
AM03328v1
Figure 3. Thermal impedance for D²PAK,
I²PAK, TO-220, TO-247
1µs
10
DS(on)
10µs
100µs
1ms
10ms
1
Operation in this area is
Limited by max R
Tj=150°C
Tc=25°C
Sinlge
pulse
0.1
0.1
Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP
1
10
100
V
DS
(V)
Figure 6. Output characteristics Figure 7. Output characteristics @ TJ=150 °C
6/22 Doc ID 9241 Rev 11
Page 7
STB/F/I/P/W11NM80 Electrical characteristics
Figure 8. Transfer characteristics Figure 9. Transconductance
Figure 10. Gate charge vs gate-source voltage Figure 11. Capacitance variations
Figure 12. Normalized gate threshold voltage
vs temperature
Doc ID 9241 Rev 11 7/22
Figure 13. Static drain-source on resistance
Page 8
Electrical characteristics STB/F/I/P/W11NM80
Figure 14. Source-drain diode forward
Figure 16. Normalized B
characteristics
vs temperature
VDSS
Figure 15. Normalized on resistance vs
temperature
8/22 Doc ID 9241 Rev 11
Page 9
STB/F/I/P/W11NM80 Test circuits
AM01468v1
VGS
PW
VD
RG
RL
D.U.T.
2200
μF
3.3
μF
V
DD
AM01469v1
VDD
47kΩ
1kΩ
47kΩ
2.7kΩ
1kΩ
12V
V
i=20V=VGMAX
2200
μF
PW
IG=CONST
100Ω
100nF
D.U.T.
V
G
AM01470v1
A
D
D.U. T.
S
B
G
25
Ω
A
A
B
B
R
G
G
FAST
DIODE
D
S
L=100μH
μF
3.3
1000
μF
V
DD
AM01471v1
Vi
Pw
VD
ID
D.U. T.
L
2200
μF
3.3
μF
VDD
AM01472v1
V(BR)DSS
VDD
VDD
VD
IDM
ID
AM01473v1
VDS
ton
tdon
tdoff
toff
tf
tr
90%
10%
10%
0
0
90%
90%
10%
V
GS
3 Test circuits
Figure 17. Switching times test circuit for
resistive load
Figure 19. Test circuit for inductive load
switching and diode recovery times
Figure 18. Gate charge test circuit
Figure 20. Unclamped inductive load test
circuit
Figure 21. Unclamped inductive waveform Figure 22. Switching time waveform
Doc ID 9241 Rev 11 9/22
Page 10
Package mechanical data STB/F/I/P/W11NM80
4 Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
specifications, grade definitions and product status are available at: www.st.com. ECOPACK
is an ST trademark.
®
packages, depending on their level of environmental compliance. ECOPACK®
10/22 Doc ID 9241 Rev 11
Page 11
STB/F/I/P/W11NM80 Package mechanical data
Table 8. D²PAK (TO-263) mechanical data
mm
Dim.
Min. Typ. Max.
A 4.40 4.60
A1 0.03 0.23
b 0.70 0.93
b2 1.14 1.70
c 0.45 0.60
c2 1.23 1.36
D 8.95 9.35
D1 7.50
E10 10.40
E1 8.50
e2.54
e1 4.88 5.28
H15 15.85
J1 2.49 2.69
L 2.29 2.79
L1 1.27 1.40
L2 1.30 1.75
R0.4
V2 0° 8°
Doc ID 9241 Rev 11 11/22
Page 12
Package mechanical data STB/F/I/P/W11NM80
Figure 23. D²PAK (TO-263) drawing
Figure 24. D²PAK footprint
12.20
(a)
9.75
0079457_S
16.90
5.08
1.60
3.50
Footprint
a. All dimension are in millimeters
12/22 Doc ID 9241 Rev 11
Page 13
STB/F/I/P/W11NM80 Package mechanical data
Table 9. TO-220FP mechanical data
mm
Dim.
Min. Typ. Max.
A4.4 4.6
B2.5 2.7
D 2.5 2.75
E0.45 0.7
F0.75 1
F1 1.15 1.70
F2 1.15 1.70
G4.95 5.2
G1 2.4 2.7
H 10 10.4
L2 16
L3 28.6 30.6
L4 9.8 10.6
L5 2.9 3.6
L6 15.9 16.4
L7 9 9.3
Dia 3 3.2
Figure 25. TO-220FP drawing
L7
A
B
Dia
L6
H
D
L5
F2
F1
E
F
G
G1
L2
L3
L4
7012510_Rev_K
Doc ID 9241 Rev 11 13/22
Page 14
Package mechanical data STB/F/I/P/W11NM80
Table 10. I²PAK (TO-262) mechanical data
mm.
DIM.
min. typ max.
A 4.40 4.60
A1 2.40 2.72
b 0.61 0.88
b1 1.14 1.70
c 0.49 0.70
c2 1.23 1.32
D 8.95 9.35
e 2.40 2.70
e1 4.95 5.15
E 10 10.40
L13 14
L1 3.50 3.93
L2 1.27 1.40
Figure 26. I²PAK (TO-262) drawing
14/22 Doc ID 9241 Rev 11
0004982_Rev_H
Page 15
STB/F/I/P/W11NM80 Package mechanical data
Table 11. TO-220 type A mechanical data
mm
Dim.
Min. Typ. Max.
A 4.40 4.60
b 0.61 0.88
b1 1.14 1.70
c 0.48 0.70
D 15.25 15.75
D1 1.27
E10 10.40
e 2.40 2.70
e1 4.95 5.15
F 1.23 1.32
H1 6.20 6.60
J1 2.40 2.72
L13 14
L1 3.50 3.93
L20 16.40
L30 28.90
∅P 3.75 3.85
Q 2.65 2.95
Doc ID 9241 Rev 11 15/22
Page 16
Package mechanical data STB/F/I/P/W11NM80
0015988_typeA_Rev_S
Figure 27. TO-220 type A drawing
16/22 Doc ID 9241 Rev 11
Page 17
STB/F/I/P/W11NM80 Package mechanical data
Table 12. TO-247 mechanical data
mm
Dim.
Min. Typ. Max.
A 4.85 5.15
A1 2.20 2.60
b 1.0 1.40
b1 2.0 2.40
b2 3.0 3.40
c 0.40 0.80
D 19.85 20.15
E 15.45 15.75
e5.45
L 14.20 14.80
L1 3.70 4.30
L2 18.50
∅P 3.55 3.65
∅R 4.50 5.50
S5.50
Doc ID 9241 Rev 11 17/22
Page 18
Package mechanical data STB/F/I/P/W11NM80
Figure 28. TO-247 drawing
18/22 Doc ID 9241 Rev 11
0075325_F
Page 19
STB/F/I/P/W11NM80 Packaging mechanical data
5 Packaging mechanical data
Table 13. D²PAK (TO-263) tape and reel mechanical data
Tape Reel
mm
Dim.
Min. Max. Min. Max.
A0 10.5 10.7 A 330
B0 15.7 15.9 B 1.5
D 1.5 1.6 C 12.8 13.2
D1 1.59 1.61 D 20.2
E 1.65 1.85 G 24.4 26.4
F 11.4 11.6 N 100
K0 4.8 5.0 T 30.4
P0 3.9 4.1
P1 11.9 12.1 Base qty 1000
P2 1.9 2.1 Bulk qty 1000
R50
T 0.25 0.35
W 23.7 24.3
Dim.
mm
Doc ID 9241 Rev 11 19/22
Page 20
Packaging mechanical data STB/F/I/P/W11NM80
Figure 29. Tape
10 pitches cumulative
tolerance on tape +/- 0.2 mm
T
K0
Top cover
tape
B0
P0
D
P2
E
F
W
Figure 30. Reel
REEL DIMENSIONS
A0
User direction of feed
User direction of feed
D1
P1
40mm min.
Access hole
R
Bending radius
AM08852v2
T
B
D
A
Full radius
20/22 Doc ID 9241 Rev 11
At slot location
C
Tape slot
in core for
tape start 25 mm min.
width
N
G measured at hub
AM08851v2
Page 21
STB/F/I/P/W11NM80 Revision history
6 Revision history
Table 14. Document revision history
Date Revision Changes
30-Sep-2004 4 Preliminary version
26-Nov-2005 5 Complete version
07-Apr-2006 6 Modified value on Figure 8
15-May-2006 7 New dv/dt value on Ta bl e 5
20-Jul-2006 8 The document has been reformatted
20-Dec-2007 9 Updated I
24-Mar-2010 10 Inserted dv/dt value in Table 2: Absolute maximum ratings
value on Table 2: Absolute maximum ratings
D
12-Sep-2011 11
Added new package and mechanical data : I²PAK
Minor text changes
Doc ID 9241 Rev 11 21/22
Page 22
STB/F/I/P/W11NM80
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2011 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
22/22 Doc ID 9241 Rev 11
Loading...