Daikin BRC1D517 Installation Manual
Remote controller
BRC1D517
INSTALLATION MANUAL
1
1
1
4
4
1
2
2
1 2
3
3
S
M
S
S
M
PCB
1
2
5
5
6
6
P2 P1 P2 P1
1 1
6
2
3
4 5
7
7
SETTING
UNIT No.
GROUP
c
a
3
1
d
e
4
562
7
b
8
8
1+22
22
BRC1D517
Remote controller
4PW15195-1
Installation manual
1
The kit includes the following parts:
1. Remove the upper part of remote
controller
(Refer to figure 1)
Insert a minus screwdriver into the slots (1) in the
lower part of the remote controller (2 places), and
remove the upper part of the remote controller.
2. Fasten the remote controller (Refer
to figure 2)
For the field supplied switch box, use optional accessory
KJB111A or KJB211A.
BRC1D517 Remote controller Installation manual
READ THIS MANUAL ATTENTIVELY
BEFORE STARTING UP THE UNIT. DO
NOT THROW IT AWAY. KEEP IT IN YOUR
FILES FOR FUTURE REFERENCE.
IMPROPER INSTALLATION OR
ATTACHMENT OF EQUIPMENT OR
ACCESSORIES COULD RESULT IN
ELECTRIC SHOCK, SHORT-CIRCUIT,
LEAKS, FIRE OR OTHER DAMAGE TO
THE EQUIPMENT. BE SURE ONLY TO
USE ACCESSORIES MADE BY DAIKIN
WHICH ARE SPECIFICALLY DESIGNED
FOR THE USE WITH THE EQUIPMENT
AND HAVE THEM INSTALLED BY A
PROFESSIONAL.
IF UNSURE OF INSTALLATION PROCEDURES OR USE, ALWAYS CONTACT
YOUR DEALER FOR ADVICE AND
INFORMATION.
Remote controller Wood screws
Wall plugs Machine screws
The PC board is mounted in the upper part
of the remote controller. Be careful not to
damage the board with the minus
screwdriver.
1 for exposed mounting, fasten with the two
included wood screws (Ø4x30) and plugs.
2 for flush-mounting, fasten with the two
included machine screws (M4x16).
NOTE Choose the flattest place possible for the
mounting surface. Be careful not to
distort the shape of the lower part of the
remote controller by overtightening the
mounting screws.
Loading...